diff -Nru tint2-0.7.1/aclocal.m4 tint2-0.9/aclocal.m4 --- tint2-0.7.1/aclocal.m4 2009-07-22 17:47:11.000000000 +0100 +++ tint2-0.9/aclocal.m4 2010-01-28 11:16:41.000000000 +0000 @@ -1,7 +1,7 @@ -# generated automatically by aclocal 1.10.1 -*- Autoconf -*- +# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,8 +13,8 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(AC_AUTOCONF_VERSION, [2.61],, -[m4_warning([this file was generated for autoconf 2.61. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, +[m4_warning([this file was generated for autoconf 2.65. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) @@ -87,16 +87,14 @@ # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], -[if test -n "$PKG_CONFIG"; then - if test -n "$$1"; then - pkg_cv_[]$1="$$1" - else - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], - [pkg_failed=yes]) - fi -else - pkg_failed=untried +[if test -n "$$1"; then + pkg_cv_[]$1="$$1" + elif test -n "$PKG_CONFIG"; then + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], + [pkg_failed=yes]) + else + pkg_failed=untried fi[]dnl ])# _PKG_CONFIG @@ -140,9 +138,9 @@ if test $pkg_failed = yes; then _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` else - $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD @@ -177,7 +175,7 @@ fi[]dnl ])# PKG_CHECK_MODULES -# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -189,10 +187,10 @@ # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.10' +[am__api_version='1.11' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.10.1], [], +m4_if([$1], [1.11.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -206,12 +204,12 @@ # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.10.1])dnl +[AM_AUTOMAKE_VERSION([1.11.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- @@ -268,14 +266,14 @@ # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 8 +# serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- @@ -288,6 +286,7 @@ AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' @@ -301,14 +300,14 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 9 +# serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, @@ -365,6 +364,16 @@ if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -382,7 +391,17 @@ done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested @@ -392,19 +411,23 @@ break fi ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -461,57 +484,68 @@ # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -#serial 3 +#serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done done -done +} ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -531,13 +565,13 @@ # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008 Free Software Foundation, Inc. +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 13 +# serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. @@ -554,7 +588,7 @@ # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.60])dnl +[AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl @@ -605,8 +639,8 @@ AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. @@ -614,24 +648,37 @@ AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header @@ -654,7 +701,7 @@ done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -665,7 +712,14 @@ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. @@ -691,13 +745,13 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 4 # AM_MAKE_INCLUDE() # ----------------- @@ -706,7 +760,7 @@ [am_make=${MAKE-make} cat > confinc << 'END' am__doit: - @echo done + @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. @@ -716,24 +770,24 @@ _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) @@ -743,14 +797,14 @@ # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 5 +# serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ @@ -767,7 +821,14 @@ AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " @@ -805,13 +866,13 @@ # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- @@ -828,7 +889,7 @@ # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- @@ -838,14 +899,14 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 5 # AM_SANITY_CHECK # --------------- @@ -854,16 +915,29 @@ # Just in case sleep 1 echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` + set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ @@ -916,18 +990,25 @@ INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006 Free Software Foundation, Inc. +# Copyright (C) 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. +# serial 2 + # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) +# AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. @@ -1024,8 +1105,3 @@ AC_SUBST([am__untar]) ]) # _AM_PROG_TAR -m4_include([m4/libtool.m4]) -m4_include([m4/ltoptions.m4]) -m4_include([m4/ltsugar.m4]) -m4_include([m4/ltversion.m4]) -m4_include([m4/lt~obsolete.m4]) diff -Nru tint2-0.7.1/AUTHORS tint2-0.9/AUTHORS --- tint2-0.7.1/AUTHORS 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/AUTHORS 2009-11-05 19:48:26.000000000 +0000 @@ -1,14 +1,15 @@ tint2 is developped by : -- 2008-2009 Thierry Lorthiois , project maintainer - +- Thierry Lorthiois +- Andreas Fink +- Euan Freeman (tintwizard) +- Christian Ruppert (autotools build system) tint2 is based on ttm source code (http://code.google.com/p/ttm/) - 2007-2008 Pål Staurland Contributors: - Christian Ruppert : autotools build system Kwaku Yeboah : wiki page Daniel Moerner : man page and debian package Doug Barton : freebsd package diff -Nru tint2-0.7.1/autogen.sh tint2-0.9/autogen.sh --- tint2-0.7.1/autogen.sh 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/autogen.sh 2009-10-22 19:26:15.000000000 +0100 @@ -2,4 +2,4 @@ [ ! -d m4 ] && mkdir m4 -autoreconf -i -s -f +autoreconf -i -s -f -v diff -Nru tint2-0.7.1/ChangeLog tint2-0.9/ChangeLog --- tint2-0.7.1/ChangeLog 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/ChangeLog 2010-01-28 11:16:34.000000000 +0000 @@ -1,3 +1,95 @@ +2010-01-28 +- Battery hide option +- bugfixes in task redrawing +- traywindow and autohide bugfix + + +2010-01-13 +- calculate right struts for multiple monitors +- New timer implementation (works for *BSD too) +- Changed behaviour for forwarding clicks to the window manager +- Tint2 sets a class name, such that it can be identified by window managers +- better omnipresent task handling +- clock timezone support +- real transparency +- adjustable systray icons +- systray: several icons in one line +- autohide +- more task states (active/urgent/iconified) +- and some minor bugfixes which nobody recognized yet ;) + + +2009-12-16 +- Scrolling through tasks by schattenprinz (added action next_task and prev_task) +- Andreas : *add* setting tooltip on clock with 'clock_tooltip = format' +- Andreas : *add* changed everything to kernel timer for easier integration with new timer +- Andreas : *add* multiple tasks can be urgent now +- Thierry : panel snapshot +- patch for FULL battery by peter.ebden +- Thierry : work on tint2conf. not ready for release yet. +- Thierry : killall -SIGUSR1 tint2 will reload config file cleanly +- Thierry : improved multi-monitor detection +- Thierry : added left2right and right2left value to systray_sort option +- Andreas : *add* option for ascending/descending/unsorted systray +- Thierry : EWMH non-resizable panel +- less disturbing omnipresent task by dmitry medvinsky +- Thierry : lower cpu use with icon. replace HUE by ALPHA on icon (see task_icon_asb) +- Thierry : add default icon on task +- Andreas : *add* tooltips +- Andreas : added possibility to put tint2 into the windowmanagers dock +- Andreas : Drag n drop over Task bring Focus +- Andreas : support skip_taskbar +- Thierry : detect pid of process owning the systray +- Andreas : added possibility to put tint2 into the windowmanagers dock + +2009-09-08 +- Drag n drop over Task bring Focus by Andreas.Fink85 + +2009-09-07 +- fixed issue 117 : support skip_taskbar by Andreas.Fink85 +- cleanup : switch space to tab + +2009-09-01 +- fixed segfault + +2009-08-30 +- detect pid of process owning the systray + +2009-08-30 +- added taskbar_active_background_id to change current desktop background. + warning : this feature have a price on cpu (tint2 redraw all task) when you switch desktop. + comment out taskbar_active_background_id if you don't want it. + +2009-08-30 +- fixed issue 130 by maato + ordered systray icon with config "systray_sort = asc/desc" + +2009-08-29 +- fixed issue 134 + +2009-08-29 +- cleanup and add desktop_right/desktop_left action on task (by jackp) + +2009-08-29 +- adjust saturation/brightness on task icon + +2009-08-29 +- merge change described in issue 122 (by jackp) + made right click easier + +2009-08-28 +- add some HSB config + +2009-08-09 +- add mouse action : maximize_restore +- fixed issue 125 + +2009-07-28 +- some tint2conf code + +2009-07-26 +- fixed icon on 64 bit system by benjaminfranzke + 2009-07-19 - fixed systray crash by mart1987 diff -Nru tint2-0.7.1/config.guess tint2-0.9/config.guess --- tint2-0.7.1/config.guess 2008-05-03 01:16:52.000000000 +0100 +++ tint2-0.9/config.guess 1970-01-01 01:00:00.000000000 +0100 @@ -1,1526 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. - -timestamp='2008-01-23' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner . -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[456]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - case ${UNAME_MACHINE} in - pc98) - echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:[3456]*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - EM64T | authenticamd) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-gnu - else - echo ${UNAME_MACHINE}-unknown-linux-gnueabi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - or32:Linux:*:*) - echo or32-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^LIBC/{ - s: ::g - p - }'`" - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac -fi - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff -Nru tint2-0.7.1/config.h.in tint2-0.9/config.h.in --- tint2-0.7.1/config.h.in 2009-07-22 17:47:16.000000000 +0100 +++ tint2-0.9/config.h.in 2010-01-28 11:16:44.000000000 +0000 @@ -1,7 +1,7 @@ /* config.h.in. Generated from configure.ac by autoheader. */ -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H +/* Define to 1 if you have the `alarm' function. */ +#undef HAVE_ALARM /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H @@ -15,9 +15,27 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `glib-2.0' library (-lglib-2.0). */ +#undef HAVE_LIBGLIB_2_0 + +/* Define to 1 if you have the `gobject-2.0' library (-lgobject-2.0). */ +#undef HAVE_LIBGOBJECT_2_0 + +/* Define to 1 if you have the `gthread-2.0' library (-lgthread-2.0). */ +#undef HAVE_LIBGTHREAD_2_0 + +/* Define to 1 if you have the `gtk-x11-2.0' library (-lgtk-x11-2.0). */ +#undef HAVE_LIBGTK_X11_2_0 + /* Define to 1 if you have the `Imlib2' library (-lImlib2). */ #undef HAVE_LIBIMLIB2 +/* Define to 1 if you have the `pthread' library (-lpthread). */ +#undef HAVE_LIBPTHREAD + +/* Define to 1 if you have the header file. */ +#undef HAVE_LOCALE_H + /* Define to 1 if your system has a GNU libc compatible `malloc' function, and to 0 otherwise. */ #undef HAVE_MALLOC @@ -28,12 +46,19 @@ /* Define to 1 if you have the `memset' function. */ #undef HAVE_MEMSET +/* Define to 1 if your system has a GNU libc compatible `realloc' function, + and to 0 otherwise. */ +#undef HAVE_REALLOC + /* Define to 1 if you have the `select' function. */ #undef HAVE_SELECT /* Define to 1 if you have the `setlocale' function. */ #undef HAVE_SETLOCALE +/* Define to 1 if stdbool.h conforms to C99. */ +#undef HAVE_STDBOOL_H + /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H @@ -55,6 +80,15 @@ /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H +/* Define to 1 if you have the `strndup' function. */ +#undef HAVE_STRNDUP + +/* Define to 1 if you have the `strrchr' function. */ +#undef HAVE_STRRCHR + +/* Define to 1 if you have the `strstr' function. */ +#undef HAVE_STRSTR + /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H @@ -79,9 +113,8 @@ /* Define to 1 if `vfork' works. */ #undef HAVE_WORKING_VFORK -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ -#undef LT_OBJDIR +/* Define to 1 if the system has the type `_Bool'. */ +#undef HAVE__BOOL /* Name of package */ #undef PACKAGE @@ -98,6 +131,9 @@ /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME +/* Define to the home page for this package. */ +#undef PACKAGE_URL + /* Define to the version of this package. */ #undef PACKAGE_VERSION @@ -125,5 +161,8 @@ /* Define to `int' if does not define. */ #undef pid_t +/* Define to rpl_realloc if the replacement function should be used. */ +#undef realloc + /* Define as `fork' if `vfork' does not work. */ #undef vfork diff -Nru tint2-0.7.1/config.sub tint2-0.9/config.sub --- tint2-0.7.1/config.sub 2008-05-03 01:16:52.000000000 +0100 +++ tint2-0.9/config.sub 1970-01-01 01:00:00.000000000 +0100 @@ -1,1658 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. - -timestamp='2008-01-16' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ - uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64vr | mips64vrel \ - | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | mt \ - | msp430 \ - | nios | nios2 \ - | ns16k | ns32k \ - | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | score \ - | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu | strongarm \ - | tahoe | thumb | tic4x | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nios-* | nios2-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tic55x | c55x*) - basic_machine=tic55x-unknown - os=-coff - ;; - tic6x | c6x*) - basic_machine=tic6x-unknown - os=-coff - ;; - tile*) - basic_machine=tile-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -openbsd* | -solidbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff -Nru tint2-0.7.1/configure tint2-0.9/configure --- tint2-0.7.1/configure 2009-07-22 17:47:14.000000000 +0100 +++ tint2-0.9/configure 2010-01-28 11:16:43.000000000 +0000 @@ -1,62 +1,85 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.61 for tint2 0.7.1. +# Generated by GNU Autoconf 2.65 for tint2 0.9rc1. # # Report bugs to . # +# # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# +# # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; esac - fi - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' fi - rm -f conf$$.sh + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } fi @@ -65,20 +88,18 @@ # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) -as_nl=' -' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -89,354 +110,322 @@ as_myself=$0 fi if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE # CDPATH. -$as_unset CDPATH - +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then - if (eval ":") 2>/dev/null; then - as_have_required=yes + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST else - as_have_required=no + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi - - if test $as_have_required = yes && (eval ": -(as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes else - exitcode=1 - echo positional parameters were not saved. + as_have_required=no fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : -test \$exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=\$LINENO - as_lineno_2=\$LINENO - test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && - test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -") 2> /dev/null; then - : else - as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - case $as_dir in + as_found=: + case $as_dir in #( /*) for as_base in sh bash ksh sh5; do - as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi done;; esac + as_found=false done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } IFS=$as_save_IFS - for as_shell in $as_candidate_shells $SHELL; do - # Try only shells that exist, to save several forks. - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { ("$as_shell") 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - + if test "x$CONFIG_SHELL" != x; then : + # We cannot yet assume a decent shell, so we have to provide a + # neutralization value for shells without unset; and this also + # works around shells that cannot unset nonexistent variables. + BASH_ENV=/dev/null + ENV=/dev/null + (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: http://code.google.com/p/tint2/issues about your +$0: system, including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 fi - - -: -_ASEOF -}; then - CONFIG_SHELL=$as_shell - as_have_required=yes - if { "$as_shell" 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - fi - - -: -(as_func_return () { - (exit $1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi -if ( set x; as_func_ret_success y && test x = "$1" ); then - : +} # as_fn_mkdir_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' else - exitcode=1 - echo positional parameters were not saved. -fi - -test $exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -_ASEOF -}; then - break -fi - -fi - - done - - if test "x$CONFIG_SHELL" != x; then - for as_var in BASH_ENV ENV - do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -fi - - - if test $as_have_required = no; then - echo This script requires a shell more modern than all the - echo shells that I found on your system. Please install a - echo modern shell, or manually run the script under such a - echo shell if you do have one. - { (exit 1); exit 1; } -fi - - -fi - -fi + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -(eval "as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +# as_fn_error ERROR [LINENO LOG_FD] +# --------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with status $?, using 1 if that was 0. +as_fn_error () +{ + as_status=$?; test $as_status -eq 0 && as_status=1 + if test "$3"; then + as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + fi + $as_echo "$as_me: error: $1" >&2 + as_fn_exit $as_status +} # as_fn_error -exitcode=0 -if as_func_success; then - : +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. + as_expr=false fi -if as_func_ret_success; then - : +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. + as_basename=false fi -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname else - exitcode=1 - echo positional parameters were not saved. + as_dirname=false fi -test \$exitcode = 0") || { - echo No shell found that supports shell functions. - echo Please tell autoconf@gnu.org about your system, - echo including any error possibly output before this - echo message -} +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= @@ -453,8 +442,7 @@ s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the @@ -464,49 +452,40 @@ exit } - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir - mkdir conf$$.dir + mkdir conf$$.dir 2>/dev/null fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln + fi else as_ln_s='cp -p' fi @@ -514,7 +493,7 @@ rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false @@ -531,12 +510,12 @@ as_test_x=' eval sh -c '\'' if test -d "$1"; then - test -d "$1/."; + test -d "$1/."; else - case $1 in - -*)set "./$1";; + case $1 in #( + -*)set "./$1";; esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' @@ -550,157 +529,8 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$lt_ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -ECHO=${lt_ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<_LT_EOF -$* -_LT_EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test -z "$lt_ECHO"; then - if test "X${echo_test_string+set}" != Xset; then - # find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if { echo_test_string=`eval $cmd`; } 2>/dev/null && - { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null - then - break - fi - done - fi - - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : - else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$ECHO" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - ECHO='print -r' - elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - ECHO='printf %s\n' - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - ECHO="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - ECHO=echo - fi - fi - fi - fi - fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -lt_ECHO=$ECHO -if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - - -exec 7<&0 &1 +test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, @@ -718,15 +548,16 @@ subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='tint2' PACKAGE_TARNAME='tint2' -PACKAGE_VERSION='0.7.1' -PACKAGE_STRING='tint2 0.7.1' +PACKAGE_VERSION='0.9rc1' +PACKAGE_STRING='tint2 0.9rc1' PACKAGE_BUGREPORT='http://code.google.com/p/tint2/issues' +PACKAGE_URL='' +ac_unique_file="src/tint.c" # Factoring default headers for most tests. ac_includes_default="\ #include @@ -763,109 +594,137 @@ # include #endif" -ac_unique_file="src/tint.c" -ac_subst_vars='SHELL -PATH_SEPARATOR -PACKAGE_NAME -PACKAGE_TARNAME -PACKAGE_VERSION -PACKAGE_STRING -PACKAGE_BUGREPORT -exec_prefix -prefix -program_transform_name -bindir -sbindir -libexecdir -datarootdir -datadir -sysconfdir -sharedstatedir -localstatedir -includedir -oldincludedir -docdir -infodir -htmldir -dvidir -pdfdir -psdir -libdir -localedir -mandir -DEFS -ECHO_C -ECHO_N -ECHO_T -LIBS +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +DISTCLEANFILES +AM_LDFLAGS +AM_CFLAGS +__PYTHON +TINT2CONF_LIBS +TINT2CONF_CFLAGS +LIBOBJS +EGREP +GREP +CPP +XMKMF +IMLIB2_LIBS +IMLIB2_CFLAGS +XINERAMA_LIBS +XINERAMA_CFLAGS +X11_LIBS +X11_CFLAGS +GOBJECT2_LIBS +GOBJECT2_CFLAGS +GLIB2_LIBS +GLIB2_CFLAGS +CAIRO_LIBS +CAIRO_CFLAGS +PANGO_LIBS +PANGO_CFLAGS +PANGOCAIRO_LIBS +PANGOCAIRO_CFLAGS +PKG_CONFIG +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +ENABLE_TINT2CONF_FALSE +ENABLE_TINT2CONF_TRUE +INSTALL_EXAMPLES_FALSE +INSTALL_EXAMPLES_TRUE +ENABLE_BATTERY_FALSE +ENABLE_BATTERY_TRUE +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_battery +enable_examples +enable_tint2conf +enable_dependency_tracking +with_x +' + ac_precious_vars='build_alias host_alias target_alias -LIBTOOL -build -build_cpu -build_vendor -build_os -host -host_cpu -host_vendor -host_os CC CFLAGS LDFLAGS +LIBS CPPFLAGS -ac_ct_CC -EXEEXT -OBJEXT -SED -GREP -EGREP -FGREP -LD -DUMPBIN -ac_ct_DUMPBIN -NM -LN_S -AR -STRIP -RANLIB -lt_ECHO -DSYMUTIL -NMEDIT -LIPO -OTOOL -OTOOL64 -CPP -INSTALL_PROGRAM -INSTALL_SCRIPT -INSTALL_DATA -am__isrc -CYGPATH_W -PACKAGE -VERSION -ACLOCAL -AUTOCONF -AUTOMAKE -AUTOHEADER -MAKEINFO -install_sh -INSTALL_STRIP_PROGRAM -mkdir_p -AWK -SET_MAKE -am__leading_dot -AMTAR -am__tar -am__untar -DEPDIR -am__include -am__quote -AMDEP_TRUE -AMDEP_FALSE -AMDEPBACKSLASH -CCDEPMODE -am__fastdepCC_TRUE -am__fastdepCC_FALSE PKG_CONFIG PANGOCAIRO_CFLAGS PANGOCAIRO_LIBS @@ -884,45 +743,14 @@ IMLIB2_CFLAGS IMLIB2_LIBS XMKMF -LIBOBJS -ENABLE_BATTERY_TRUE -ENABLE_BATTERY_FALSE -INSTALL_EXAMPLES_TRUE -INSTALL_EXAMPLES_FALSE -LTLIBOBJS' -ac_subst_files='' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP -PKG_CONFIG -PANGOCAIRO_CFLAGS -PANGOCAIRO_LIBS -PANGO_CFLAGS -PANGO_LIBS -CAIRO_CFLAGS -CAIRO_LIBS -GLIB2_CFLAGS -GLIB2_LIBS -GOBJECT2_CFLAGS -GOBJECT2_LIBS -X11_CFLAGS -X11_LIBS -XINERAMA_CFLAGS -XINERAMA_LIBS -IMLIB2_CFLAGS -IMLIB2_LIBS -XMKMF' +CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null @@ -1021,13 +849,20 @@ datarootdir=$ac_optarg ;; -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` - eval enable_$ac_feature=no ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; @@ -1040,13 +875,20 @@ dvidir=$ac_optarg ;; -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` - eval enable_$ac_feature=\$ac_optarg ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -1237,22 +1079,36 @@ ac_init_version=: ;; -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/[-.]/_/g'` - eval with_$ac_package=\$ac_optarg ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/[-.]/_/g'` - eval with_$ac_package=no ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. @@ -1272,25 +1128,25 @@ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } + -*) as_fn_error "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information." ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error "invalid variable name: \`$ac_envvar'" ;; + esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; @@ -1299,23 +1155,36 @@ if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } + as_fn_error "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac fi -# Be sure to have absolute directory names. +# Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; } + as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -1329,7 +1198,7 @@ if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes @@ -1345,23 +1214,21 @@ ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - { echo "$as_me: error: Working directory cannot be determined" >&2 - { (exit 1); exit 1; }; } + as_fn_error "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - { echo "$as_me: error: pwd does not report name of working directory" >&2 - { (exit 1); exit 1; }; } + as_fn_error "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$0" || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X"$0" | + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -1388,13 +1255,11 @@ fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } + as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1420,7 +1285,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures tint2 0.7.1 to adapt to many kinds of systems. +\`configure' configures tint2 0.9rc1 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1442,9 +1307,9 @@ Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] + [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] + [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify @@ -1454,25 +1319,25 @@ For better control, use the options below. Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/tint2] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/tint2] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF @@ -1485,38 +1350,29 @@ X features: --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of tint2 0.7.1:";; + short | recursive ) echo "Configuration of tint2 0.9rc1:";; esac cat <<\_ACEOF Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors --disable-battery Disable battery status plugin --enable-examples Install additional tin2rc examples + --enable-tint2conf Enable tint2conf build, a GTK+2 theme switcher for + tint2 + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic try to use only PIC/non-PIC objects [default=use - both] - --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-x use the X Window System Some influential environment variables: @@ -1525,9 +1381,8 @@ LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory - CPP C preprocessor PKG_CONFIG path to pkg-config utility PANGOCAIRO_CFLAGS C compiler flags for PANGOCAIRO, overriding pkg-config @@ -1556,6 +1411,7 @@ C compiler flags for IMLIB2, overriding pkg-config IMLIB2_LIBS linker flags for IMLIB2, overriding pkg-config XMKMF Path to xmkmf, Makefile generator for X Window System + CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. @@ -1568,15 +1424,17 @@ if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; @@ -1612,7 +1470,7 @@ echo && $SHELL "$ac_srcdir/configure" --help=recursive else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done @@ -1621,22 +1479,508 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -tint2 configure 0.7.1 -generated by GNU Autoconf 2.61 +tint2 configure 0.9rc1 +generated by GNU Autoconf 2.65 -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +Copyright (C) 2009 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( cat <<\_ASBOX +## ---------------------------------------------------- ## +## Report this to http://code.google.com/p/tint2/issues ## +## ---------------------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_header_compile + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_type + +# ac_fn_c_find_intX_t LINENO BITS VAR +# ----------------------------------- +# Finds a signed integer type with width BITS, setting cache variable VAR +# accordingly. +ac_fn_c_find_intX_t () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5 +$as_echo_n "checking for int$2_t... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + # Order is important - never check a type that is potentially smaller + # than half of the expected target width. + for ac_type in int$2_t 'int' 'long int' \ + 'long long int' 'short int' 'signed char'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(enum { N = $2 / 2 - 1 }; + 0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(enum { N = $2 / 2 - 1 }; + ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1) + < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + case $ac_type in #( + int$2_t) : + eval "$3=yes" ;; #( + *) : + eval "$3=\$ac_type" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + eval as_val=\$$3 + if test "x$as_val" = x""no; then : + +else + break +fi + done +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_find_intX_t + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} + +} # ac_fn_c_check_func cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by tint2 $as_me 0.7.1, which was -generated by GNU Autoconf 2.61. Invocation command line was +It was created by tint2 $as_me 0.9rc1, which was +generated by GNU Autoconf 2.65. Invocation command line was $ $0 $@ @@ -1672,8 +2016,8 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done + $as_echo "PATH: $as_dir" + done IFS=$as_save_IFS } >&5 @@ -1707,12 +2051,12 @@ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" + as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else @@ -1728,13 +2072,13 @@ -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args '$ac_arg'" + as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -1759,12 +2103,13 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -1793,9 +2138,9 @@ do eval ac_val=\$$ac_var case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac - echo "$ac_var='\''$ac_val'\''" + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo @@ -1810,9 +2155,9 @@ do eval ac_val=\$$ac_var case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac - echo "$ac_var='\''$ac_val'\''" + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi @@ -1828,83 +2173,88 @@ echo fi test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h +$as_echo "/* confdefs.h */" > confdefs.h + # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + # Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE if test -n "$CONFIG_SITE"; then - set x "$CONFIG_SITE" + ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then - set x "$prefix/share/config.site" "$prefix/etc/config.site" + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site else - set x "$ac_default_prefix/share/config.site" \ - "$ac_default_prefix/etc/config.site" + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site fi -shift -for ac_site_file +for ac_site_file in "$ac_site_file1" "$ac_site_file2" do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi @@ -1918,68 +2268,56 @@ eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in - *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - - - - - - - - - - - - - - - - - - - - - - - - + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -1989,51 +2327,20 @@ -case `pwd` in - *\ * | *\ *) - { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.2.4' -macro_revision='1.2976' - - - - - - - - - - - - - -ltmain="$ac_aux_dir/ltmain.sh" +am__api_version='1.11' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi + for ac_t in install-sh install.sh shtool; do + if test -f "$ac_dir/$ac_t"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/$ac_t -c" + break 2 + fi + done done if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 -echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -2045,297 +2352,571 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } - -{ echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6; } -if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -echo "$as_me: error: invalid value of canonical build" >&2;} - { (exit 1); exit 1; }; };; +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6; } -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } -fi + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi fi -{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -echo "$as_me: error: invalid value of canonical host" >&2;} - { (exit 1); exit 1; }; };; +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 + fi + + test "$2" = conftest.file + ) +then + # Ok. + : else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + as_fn_error "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : + $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - if test "x$ac_ct_CC" = x; then - CC="" + if test "x$ac_ct_STRIP" = x; then + STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - CC=$ac_ct_CC + STRIP=$ac_ct_STRIP fi else - CC="$ac_cv_prog_CC" + STRIP="$ac_cv_prog_STRIP" fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then : + $as_echo_n "(cached) " >&6 else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done IFS=$as_save_IFS fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" fi fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then : + $as_echo_n "(cached) " >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. else - ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo fi fi + + +# Define the identity of the package. + PACKAGE='tint2' + VERSION='0.9rc1' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + + + + +ac_config_headers="$ac_config_headers config.h" + + +# tint2 +# Check whether --enable-battery was given. +if test "${enable_battery+set}" = set; then : + enableval=$enable_battery; case "${enableval}" in + yes) battery=true ;; + no) battery=false ;; + *) as_fn_error "bad value ${enableval} for --disable-battery" "$LINENO" 5 ;; + esac +else + battery=true +fi + + if test x$battery = xtrue; then + ENABLE_BATTERY_TRUE= + ENABLE_BATTERY_FALSE='#' +else + ENABLE_BATTERY_TRUE='#' + ENABLE_BATTERY_FALSE= fi + +# + +# Check whether --enable-examples was given. +if test "${enable_examples+set}" = set; then : + enableval=$enable_examples; case "${enableval}" in + yes) examples=true ;; + no) examples=false ;; + *) as_fn_error "bad value ${enableval} for --enable-examples" "$LINENO" 5 ;; + esac +else + examples=false fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + + if test x$examples = xtrue; then + INSTALL_EXAMPLES_TRUE= + INSTALL_EXAMPLES_FALSE='#' else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + INSTALL_EXAMPLES_TRUE='#' + INSTALL_EXAMPLES_FALSE= fi +# tint2conf +# Check whether --enable-tint2conf was given. +if test "${enable_tint2conf+set}" = set; then : + enableval=$enable_tint2conf; case "${enableval}" in + yes) tint2conf=true ;; + no) tint2conf=false ;; + *) as_fn_error "bad value ${enableval} for --enable-tint2conf" "$LINENO" 5 ;; + esac +else + tint2conf=false +fi + + if test x$tint2conf = xtrue; then + ENABLE_TINT2CONF_TRUE= + ENABLE_TINT2CONF_FALSE='#' +else + ENABLE_TINT2CONF_TRUE='#' + ENABLE_TINT2CONF_FALSE= fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + +# + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -2345,41 +2926,37 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - test -n "$CC" && break - done fi -if test -z "$CC"; then +if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -2389,96 +2966,274 @@ do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do + for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - - test -n "$ac_ct_CC" && break -done - if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi +else + CC="$ac_cv_prog_CC" fi -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO: checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "no acceptable C compiler found in \$PATH +See \`config.log' for more details." "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -V >&5") 2>&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2490,42 +3245,38 @@ } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -# -# List of possible output files, starting from the most likely. -# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) -# only as a last resort. b.out is created by i960 compilers. -ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' -# -# The IRIX 6 linker writes into existing files which may not be -# executable, retaining their permissions. Remove them first so a -# subsequent execution test works. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + ac_rmfiles= for ac_file in $ac_files do case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles -if { (ac_try="$ac_link_default" +if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, @@ -2535,14 +3286,14 @@ do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi @@ -2561,78 +3312,42 @@ else ac_file='' fi - -{ echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6; } -if test -z "$ac_file"; then - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ as_fn_set_status 77 +as_fn_error "C compiler cannot create executables +See \`config.log' for more details." "$LINENO" 5; }; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -{ echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - -rm -f a.out a.exe conftest$ac_cv_exeext b.out +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } -{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6; } - -{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } -if { (ac_try="$ac_link" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -2640,37 +3355,90 @@ for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if test "${ac_cv_objext+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2682,51 +3450,46 @@ } _ACEOF rm -f conftest.o conftest.obj -if { (ac_try="$ac_compile" +if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else - echo "$as_me: failed program was:" >&5 + $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "cannot compute suffix of object files: cannot compile +See \`config.log' for more details." "$LINENO" 5; } fi - rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if test "${ac_cv_c_compiler_gnu+set}" = set; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2740,54 +3503,34 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no + ac_compiler_gnu=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } -GCC=`test $ac_compiler_gnu = yes && echo yes` +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if test "${ac_cv_prog_cc_g+set}" = set; then : + $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2798,34 +3541,11 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2836,35 +3556,12 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_compile "$LINENO"; then : - ac_c_werror_flag=$ac_save_c_werror_flag +else + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2875,42 +3572,18 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi -{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -2926,18 +3599,14 @@ CFLAGS= fi fi -{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then : + $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -2994,31 +3663,9 @@ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then + if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done @@ -3029,9652 +3676,1242 @@ # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) - { echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6; } ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; xno) - { echo "$as_me:$LINENO: result: unsupported" >&5 -echo "${ECHO_T}unsupported" >&6; } ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" - { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" -{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } -if test "${ac_cv_path_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" | sed 99q >conftest.sed - $as_unset ac_script || ac_script= - # Extract the first word of "sed gsed" to use in msg output -if test -z "$SED"; then -set dummy sed gsed; ac_prog_name=$2 -if test "${ac_cv_path_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_path_SED_found=false -# Loop through the user's path and test for each of PROGNAME-LIST -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue - # Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac +ac_config_commands="$ac_config_commands depfiles" - $ac_path_SED_found && break 3 - done -done +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi -done -IFS=$as_save_IFS +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; fi -SED="$ac_cv_path_SED" -if test -z "$SED"; then - { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 -echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} - { (exit 1); exit 1; }; } +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' fi - + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' else - ac_cv_path_SED=$SED + AMDEP_TRUE='#' + AMDEP_FALSE= fi -fi -{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 -echo "${ECHO_T}$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi -{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 -echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } -if test "${ac_cv_path_GREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Extract the first word of "grep ggrep" to use in msg output -if test -z "$GREP"; then -set dummy grep ggrep; ac_prog_name=$2 -if test "${ac_cv_path_GREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : + $as_echo_n "(cached) " >&6 else - ac_path_GREP_found=false -# Loop through the user's path and test for each of PROGNAME-LIST -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue - # Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - - $ac_path_GREP_found && break 3 - done -done - + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done + done IFS=$as_save_IFS - -fi - -GREP="$ac_cv_path_GREP" -if test -z "$GREP"; then - { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } + ;; +esac fi - +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } else - ac_cv_path_GREP=$GREP + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi fi -{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 -echo "${ECHO_T}$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - # Extract the first word of "egrep" to use in msg output -if test -z "$EGREP"; then -set dummy egrep; ac_prog_name=$2 -if test "${ac_cv_path_EGREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : + $as_echo_n "(cached) " >&6 else - ac_path_EGREP_found=false -# Loop through the user's path and test for each of PROGNAME-LIST -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue - # Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - - $ac_path_EGREP_found && break 3 - done -done - + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done + done IFS=$as_save_IFS - + ;; +esac fi - -EGREP="$ac_cv_path_EGREP" -if test -z "$EGREP"; then - { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi else - ac_cv_path_EGREP=$EGREP + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" fi +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi - fi fi -{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 -echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" +# Checks for libraries. + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PANGOCAIRO" >&5 +$as_echo_n "checking for PANGOCAIRO... " >&6; } -{ echo "$as_me:$LINENO: checking for fgrep" >&5 -echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } -if test "${ac_cv_path_FGREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +if test -n "$PANGOCAIRO_CFLAGS"; then + pkg_cv_PANGOCAIRO_CFLAGS="$PANGOCAIRO_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pangocairo\""; } >&5 + ($PKG_CONFIG --exists --print-errors "pangocairo") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_PANGOCAIRO_CFLAGS=`$PKG_CONFIG --cflags "pangocairo" 2>/dev/null` else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - # Extract the first word of "fgrep" to use in msg output -if test -z "$FGREP"; then -set dummy fgrep; ac_prog_name=$2 -if test "${ac_cv_path_FGREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$PANGOCAIRO_LIBS"; then + pkg_cv_PANGOCAIRO_LIBS="$PANGOCAIRO_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pangocairo\""; } >&5 + ($PKG_CONFIG --exists --print-errors "pangocairo") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_PANGOCAIRO_LIBS=`$PKG_CONFIG --libs "pangocairo" 2>/dev/null` else - ac_path_FGREP_found=false -# Loop through the user's path and test for each of PROGNAME-LIST -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue - # Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - + pkg_failed=yes +fi + else + pkg_failed=untried +fi - $ac_path_FGREP_found && break 3 - done -done -done -IFS=$as_save_IFS +if test $pkg_failed = yes; then +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no fi + if test $_pkg_short_errors_supported = yes; then + PANGOCAIRO_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "pangocairo" 2>&1` + else + PANGOCAIRO_PKG_ERRORS=`$PKG_CONFIG --print-errors "pangocairo" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$PANGOCAIRO_PKG_ERRORS" >&5 -FGREP="$ac_cv_path_FGREP" -if test -z "$FGREP"; then - { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } -fi + as_fn_error "Package requirements (pangocairo) were not met: -else - ac_cv_path_FGREP=$FGREP -fi +$PANGOCAIRO_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. - fi -fi -{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 -echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" +Alternatively, you may set the environment variables PANGOCAIRO_CFLAGS +and PANGOCAIRO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" "$LINENO" 5 +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables PANGOCAIRO_CFLAGS +and PANGOCAIRO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. -test -z "$GREP" && GREP=grep +To get pkg-config, see . +See \`config.log' for more details." "$LINENO" 5; } +else + PANGOCAIRO_CFLAGS=$pkg_cv_PANGOCAIRO_CFLAGS + PANGOCAIRO_LIBS=$pkg_cv_PANGOCAIRO_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PANGO" >&5 +$as_echo_n "checking for PANGO... " >&6; } +if test -n "$PANGO_CFLAGS"; then + pkg_cv_PANGO_CFLAGS="$PANGO_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pango\""; } >&5 + ($PKG_CONFIG --exists --print-errors "pango") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_PANGO_CFLAGS=`$PKG_CONFIG --cflags "pango" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$PANGO_LIBS"; then + pkg_cv_PANGO_LIBS="$PANGO_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pango\""; } >&5 + ($PKG_CONFIG --exists --print-errors "pango") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_PANGO_LIBS=`$PKG_CONFIG --libs "pango" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test $pkg_failed = yes; then +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + PANGO_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "pango" 2>&1` + else + PANGO_PKG_ERRORS=`$PKG_CONFIG --print-errors "pango" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$PANGO_PKG_ERRORS" >&5 + as_fn_error "Package requirements (pango) were not met: +$PANGO_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables PANGO_CFLAGS +and PANGO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" "$LINENO" 5 +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables PANGO_CFLAGS +and PANGO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." "$LINENO" 5; } +else + PANGO_CFLAGS=$pkg_cv_PANGO_CFLAGS + PANGO_LIBS=$pkg_cv_PANGO_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for CAIRO" >&5 +$as_echo_n "checking for CAIRO... " >&6; } -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } -else - { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } -fi -if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 + ($PKG_CONFIG --exists --print-errors "cairo") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_CAIRO_CFLAGS=`$PKG_CONFIG --cflags "cairo" 2>/dev/null` else - lt_cv_path_LD="$LD" # Let the user override the test with a path. + pkg_failed=yes fi + else + pkg_failed=untried fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - { echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6; } +if test -n "$CAIRO_LIBS"; then + pkg_cv_CAIRO_LIBS="$CAIRO_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"cairo\""; } >&5 + ($PKG_CONFIG --exists --print-errors "cairo") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_CAIRO_LIBS=`$PKG_CONFIG --libs "cairo" 2>/dev/null` else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + pkg_failed=yes fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld +if test $pkg_failed = yes; then + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + CAIRO_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "cairo" 2>&1` + else + CAIRO_PKG_ERRORS=`$PKG_CONFIG --print-errors "cairo" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$CAIRO_PKG_ERRORS" >&5 + as_fn_error "Package requirements (cairo) were not met: +$CAIRO_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables CAIRO_CFLAGS +and CAIRO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" "$LINENO" 5 +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables CAIRO_CFLAGS +and CAIRO_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. -{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 -echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } -if test "${lt_cv_path_NM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +To get pkg-config, see . +See \`config.log' for more details." "$LINENO" 5; } else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi + CAIRO_CFLAGS=$pkg_cv_CAIRO_CFLAGS + CAIRO_LIBS=$pkg_cv_CAIRO_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + : fi -{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 -echo "${ECHO_T}$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$ac_tool_prefix"; then - for ac_prog in "dumpbin -symbols" "link -dump -symbols" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_DUMPBIN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 -echo "${ECHO_T}$DUMPBIN" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in "dumpbin -symbols" "link -dump -symbols" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GLIB2" >&5 +$as_echo_n "checking for GLIB2... " >&6; } + +if test -n "$GLIB2_CFLAGS"; then + pkg_cv_GLIB2_CFLAGS="$GLIB2_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GLIB2_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0" 2>/dev/null` +else + pkg_failed=yes fi + else + pkg_failed=untried fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 -echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } +if test -n "$GLIB2_LIBS"; then + pkg_cv_GLIB2_LIBS="$GLIB2_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "glib-2.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GLIB2_LIBS=`$PKG_CONFIG --libs "glib-2.0" 2>/dev/null` else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + pkg_failed=yes +fi + else + pkg_failed=untried fi - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi +if test $pkg_failed = yes; then - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no fi -test -z "$NM" && NM=nm + if test $_pkg_short_errors_supported = yes; then + GLIB2_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "glib-2.0" 2>&1` + else + GLIB2_PKG_ERRORS=`$PKG_CONFIG --print-errors "glib-2.0" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$GLIB2_PKG_ERRORS" >&5 + as_fn_error "Package requirements (glib-2.0) were not met: +$GLIB2_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GLIB2_CFLAGS +and GLIB2_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" "$LINENO" 5 +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GLIB2_CFLAGS +and GLIB2_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. -{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 -echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } -if test "${lt_cv_nm_interface+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +To get pkg-config, see . +See \`config.log' for more details." "$LINENO" 5; } else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:3703: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:3706: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:3709: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* + GLIB2_CFLAGS=$pkg_cv_GLIB2_CFLAGS + GLIB2_LIBS=$pkg_cv_GLIB2_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + : fi -{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 -echo "${ECHO_T}$lt_cv_nm_interface" >&6; } -{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } -else - { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6; } -fi - -# find the maximum length of command line arguments -{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } -if test "${lt_cv_sys_max_cmd_len+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GOBJECT2" >&5 +$as_echo_n "checking for GOBJECT2... " >&6; } - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; +if test -n "$GOBJECT2_CFLAGS"; then + pkg_cv_GOBJECT2_CFLAGS="$GOBJECT2_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-2.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gobject-2.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GOBJECT2_CFLAGS=`$PKG_CONFIG --cflags "gobject-2.0" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$GOBJECT2_LIBS"; then + pkg_cv_GOBJECT2_LIBS="$GOBJECT2_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gobject-2.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "gobject-2.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_GOBJECT2_LIBS=`$PKG_CONFIG --libs "gobject-2.0" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ - = "XX$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -fi +if test $pkg_failed = yes; then -if test -n $lt_cv_sys_max_cmd_len ; then - { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes else - { echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6; } + _pkg_short_errors_supported=no fi -max_cmd_len=$lt_cv_sys_max_cmd_len + if test $_pkg_short_errors_supported = yes; then + GOBJECT2_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gobject-2.0" 2>&1` + else + GOBJECT2_PKG_ERRORS=`$PKG_CONFIG --print-errors "gobject-2.0" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$GOBJECT2_PKG_ERRORS" >&5 + as_fn_error "Package requirements (gobject-2.0) were not met: +$GOBJECT2_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables GOBJECT2_CFLAGS +and GOBJECT2_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" "$LINENO" 5 +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables GOBJECT2_CFLAGS +and GOBJECT2_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} +To get pkg-config, see . +See \`config.log' for more details." "$LINENO" 5; } +else + GOBJECT2_CFLAGS=$pkg_cv_GOBJECT2_CFLAGS + GOBJECT2_LIBS=$pkg_cv_GOBJECT2_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi -{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 -echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 -echo "${ECHO_T}$xsi_shell" >&6; } -{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 -echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 -echo "${ECHO_T}$lt_shell_append" >&6; } +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11" >&5 +$as_echo_n "checking for X11... " >&6; } -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset +if test -n "$X11_CFLAGS"; then + pkg_cv_X11_CFLAGS="$X11_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11 xdamage xcomposite\""; } >&5 + ($PKG_CONFIG --exists --print-errors "x11 xdamage xcomposite") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_X11_CFLAGS=`$PKG_CONFIG --cflags "x11 xdamage xcomposite" 2>/dev/null` else - lt_unset=false + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$X11_LIBS"; then + pkg_cv_X11_LIBS="$X11_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11 xdamage xcomposite\""; } >&5 + ($PKG_CONFIG --exists --print-errors "x11 xdamage xcomposite") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_X11_LIBS=`$PKG_CONFIG --libs "x11 xdamage xcomposite" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried fi +if test $pkg_failed = yes; then +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + X11_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "x11 xdamage xcomposite" 2>&1` + else + X11_PKG_ERRORS=`$PKG_CONFIG --print-errors "x11 xdamage xcomposite" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$X11_PKG_ERRORS" >&5 -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - + as_fn_error "Package requirements (x11 xdamage xcomposite) were not met: +$X11_PKG_ERRORS +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. +Alternatively, you may set the environment variables X11_CFLAGS +and X11_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" "$LINENO" 5 +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. +Alternatively, you may set the environment variables X11_CFLAGS +and X11_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." "$LINENO" 5; } +else + X11_CFLAGS=$pkg_cv_X11_CFLAGS + X11_LIBS=$pkg_cv_X11_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi -{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } -if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XINERAMA" >&5 +$as_echo_n "checking for XINERAMA... " >&6; } +if test -n "$XINERAMA_CFLAGS"; then + pkg_cv_XINERAMA_CFLAGS="$XINERAMA_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xinerama\""; } >&5 + ($PKG_CONFIG --exists --print-errors "xinerama") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_XINERAMA_CFLAGS=`$PKG_CONFIG --cflags "xinerama" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$XINERAMA_LIBS"; then + pkg_cv_XINERAMA_LIBS="$XINERAMA_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xinerama\""; } >&5 + ($PKG_CONFIG --exists --print-errors "xinerama") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_XINERAMA_LIBS=`$PKG_CONFIG --libs "xinerama" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test $pkg_failed = yes; then +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + XINERAMA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "xinerama" 2>&1` + else + XINERAMA_PKG_ERRORS=`$PKG_CONFIG --print-errors "xinerama" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$XINERAMA_PKG_ERRORS" >&5 + as_fn_error "Package requirements (xinerama) were not met: +$XINERAMA_PKG_ERRORS -{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 -echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } -if test "${lt_cv_deplibs_check_method+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. -beos*) - lt_cv_deplibs_check_method=pass_all - ;; +Alternatively, you may set the environment variables XINERAMA_CFLAGS +and XINERAMA_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" "$LINENO" 5 +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; +Alternatively, you may set the environment variables XINERAMA_CFLAGS +and XINERAMA_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; +To get pkg-config, see . +See \`config.log' for more details." "$LINENO" 5; } +else + XINERAMA_CFLAGS=$pkg_cv_XINERAMA_CFLAGS + XINERAMA_LIBS=$pkg_cv_XINERAMA_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + : +fi -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; -# This must be Linux ELF. -linux* | k*bsd*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for IMLIB2" >&5 +$as_echo_n "checking for IMLIB2... " >&6; } -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; +if test -n "$IMLIB2_CFLAGS"; then + pkg_cv_IMLIB2_CFLAGS="$IMLIB2_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"imlib2\""; } >&5 + ($PKG_CONFIG --exists --print-errors "imlib2") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_IMLIB2_CFLAGS=`$PKG_CONFIG --cflags "imlib2" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$IMLIB2_LIBS"; then + pkg_cv_IMLIB2_LIBS="$IMLIB2_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"imlib2\""; } >&5 + ($PKG_CONFIG --exists --print-errors "imlib2") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_IMLIB2_LIBS=`$PKG_CONFIG --libs "imlib2" 2>/dev/null` +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; +if test $pkg_failed = yes; then -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + IMLIB2_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "imlib2" 2>&1` + else + IMLIB2_PKG_ERRORS=`$PKG_CONFIG --print-errors "imlib2" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$IMLIB2_PKG_ERRORS" >&5 -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; + as_fn_error "Package requirements (imlib2) were not met: -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; +$IMLIB2_PKG_ERRORS -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; +Alternatively, you may set the environment variables IMLIB2_CFLAGS +and IMLIB2_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +" "$LINENO" 5 +elif test $pkg_failed = untried; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac +Alternatively, you may set the environment variables IMLIB2_CFLAGS +and IMLIB2_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. +To get pkg-config, see . +See \`config.log' for more details." "$LINENO" 5; } +else + IMLIB2_CFLAGS=$pkg_cv_IMLIB2_CFLAGS + IMLIB2_LIBS=$pkg_cv_IMLIB2_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + : fi -{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - +# Ensure that Imlib2 has been built with X support and reset LIBS since AC_CHECK_LIB adds -lImlib2 on success. +LIBS_SAVED=$LIBS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for imlib_context_set_display in -lImlib2" >&5 +$as_echo_n "checking for imlib_context_set_display in -lImlib2... " >&6; } +if test "${ac_cv_lib_Imlib2_imlib_context_set_display+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lImlib2 $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char imlib_context_set_display (); +int +main () +{ +return imlib_context_set_display (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_Imlib2_imlib_context_set_display=yes +else + ac_cv_lib_Imlib2_imlib_context_set_display=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Imlib2_imlib_context_set_display" >&5 +$as_echo "$ac_cv_lib_Imlib2_imlib_context_set_display" >&6; } +if test "x$ac_cv_lib_Imlib2_imlib_context_set_display" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBIMLIB2 1 +_ACEOF + LIBS="-lImlib2 $LIBS" +else + as_fn_error "Imlib2 must be built with X support" "$LINENO" 5 +fi +LIBS=$LIBS_SAVED -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. +# Checks for header files. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then : + $as_echo_n "(cached) " >&6 else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : +else + # Broken: fails on valid input. +continue fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6; } +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break fi + done + ac_cv_prog_CPP=$CPP fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. + CPP=$ac_cv_prog_CPP else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -echo "${ECHO_T}$ac_ct_AR" >&6; } else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } + # Broken: fails on valid input. +continue fi +rm -f conftest.err conftest.$ac_ext - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue else - AR="$ac_cv_prog_AR" + # Passes both tests. +ac_preproc_ok=: +break fi +rm -f conftest.err conftest.$ac_ext -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru - +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." "$LINENO" 5; } +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 -echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6; } -else - { echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6; } -fi - - - - - - - - - - - - - - - - - - - - - - - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval=$enable_libtool_lock; -fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 4820 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } -if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - lt_cv_cc_needs_belf=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - lt_cv_cc_needs_belf=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_DSYMUTIL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 -echo "${ECHO_T}$DSYMUTIL" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 -echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_NMEDIT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { echo "$as_me:$LINENO: result: $NMEDIT" >&5 -echo "${ECHO_T}$NMEDIT" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 -echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_LIPO+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { echo "$as_me:$LINENO: result: $LIPO" >&5 -echo "${ECHO_T}$LIPO" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LIPO="lipo" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 -echo "${ECHO_T}$ac_ct_LIPO" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_OTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { echo "$as_me:$LINENO: result: $OTOOL" >&5 -echo "${ECHO_T}$OTOOL" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL="otool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 -echo "${ECHO_T}$ac_ct_OTOOL" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_OTOOL64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { echo "$as_me:$LINENO: result: $OTOOL64" >&5 -echo "${ECHO_T}$OTOOL64" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 -echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 -echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } -if test "${lt_cv_apple_cc_single_mod+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 -echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } - { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 -echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } -if test "${lt_cv_ld_exported_symbols_list+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - lt_cv_ld_exported_symbols_list=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - lt_cv_ld_exported_symbols_list=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 -echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_stdc=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - -fi -fi -{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_header in dlfcn.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -# Set options - - - - enable_dlopen=no - - - enable_win32_dll=no - - - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=yes -fi - - - - - - - - - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then - withval=$with_pic; pic_mode="$withval" -else - pic_mode=default -fi - - -test -z "$pic_mode" && pic_mode=default - - - - - - - - # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -{ echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } -if test "${lt_cv_objdir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -echo "${ECHO_T}$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -#define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - - - - - - - - - - - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' - - { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6671: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:6675: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - -{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl*) - # IBM XL C 8.0/Fortran 10.1 on PPC - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac -{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } - - - - - - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } -if test "${lt_cv_prog_compiler_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6995: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:6999: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } -if test "${lt_cv_prog_compiler_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } - -if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7100: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:7104: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7155: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:7159: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6; } - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag= - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld='-rpath $libdir' - archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - link_all_deplibs=no - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes=yes - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='' - link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" - if test "$GCC" = "yes"; then - output_verbose_link_cmd=echo - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat >conftest.$ac_ext <<_ACEOF -int foo(void) {} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' - ;; - esac - fi - fi - -{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 -echo "${ECHO_T}$archive_cmds_need_lc" >&6; } - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } - -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then - shlibpath_overrides_runpath=yes -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux - need_lib_prefix=no - need_version=no - library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6; } - -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dlopen=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - { echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shl_load - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_shl_load || defined __stub___shl_load -choke me -#endif - -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_shl_load=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dld_shl_load=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - { echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef dlopen - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_dlopen || defined __stub___dlopen -choke me -#endif - -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_dlopen=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dlopen=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_svld_dlopen=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dld_dld_link=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line 9916 "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - exit (status); -} -_LT_EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line 10016 "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - exit (status); -} -_LT_EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - fi - ;; - *) - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report which library types will actually be built - { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } - { echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6; } - - { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - { echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6; } - - { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - { echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - -am__api_version='1.10' - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done -IFS=$as_save_IFS - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } -fi -{ echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. echo might interpret backslashes. -# By default was `s,x,x', remove it if useless. -cat <<\_ACEOF >conftest.sed -s/[\\$]/&&/g;s/;s,x,x,$// -_ACEOF -program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm -f conftest.sed - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 -echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } -if test -z "$MKDIR_P"; then - if test "${ac_cv_path_mkdir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done -done -IFS=$as_save_IFS - -fi - - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - test -d ./--version && rmdir ./--version - MKDIR_P="$ac_install_sh -d" - fi -fi -{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 -echo "${ECHO_T}$MKDIR_P" >&6; } - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } -set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - SET_MAKE= -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo done -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi - - -{ echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='tint2' - VERSION='0.7.1' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - -depcc="$CC" am_compiler_list= - -{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - - - - -ac_config_headers="$ac_config_headers config.h" - - -# Checks for programs. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO: checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_c89=$ac_arg -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6; } ;; - xno) - { echo "$as_me:$LINENO: result: unsupported" >&5 -echo "${ECHO_T}unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; -esac - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Checks for libraries. - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_PKG_CONFIG+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 -echo "${ECHO_T}$PKG_CONFIG" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 -echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 -echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - PKG_CONFIG="" - fi - -fi - -pkg_failed=no -{ echo "$as_me:$LINENO: checking for PANGOCAIRO" >&5 -echo $ECHO_N "checking for PANGOCAIRO... $ECHO_C" >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$PANGOCAIRO_CFLAGS"; then - pkg_cv_PANGOCAIRO_CFLAGS="$PANGOCAIRO_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pangocairo\"") >&5 - ($PKG_CONFIG --exists --print-errors "pangocairo") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_PANGOCAIRO_CFLAGS=`$PKG_CONFIG --cflags "pangocairo" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$PANGOCAIRO_LIBS"; then - pkg_cv_PANGOCAIRO_LIBS="$PANGOCAIRO_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pangocairo\"") >&5 - ($PKG_CONFIG --exists --print-errors "pangocairo") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_PANGOCAIRO_LIBS=`$PKG_CONFIG --libs "pangocairo" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - PANGOCAIRO_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "pangocairo"` - else - PANGOCAIRO_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pangocairo"` - fi - # Put the nasty error message in config.log where it belongs - echo "$PANGOCAIRO_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (pangocairo) were not met: - -$PANGOCAIRO_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables PANGOCAIRO_CFLAGS -and PANGOCAIRO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (pangocairo) were not met: - -$PANGOCAIRO_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables PANGOCAIRO_CFLAGS -and PANGOCAIRO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables PANGOCAIRO_CFLAGS -and PANGOCAIRO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables PANGOCAIRO_CFLAGS -and PANGOCAIRO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - PANGOCAIRO_CFLAGS=$pkg_cv_PANGOCAIRO_CFLAGS - PANGOCAIRO_LIBS=$pkg_cv_PANGOCAIRO_LIBS - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - : -fi - - - - -pkg_failed=no -{ echo "$as_me:$LINENO: checking for PANGO" >&5 -echo $ECHO_N "checking for PANGO... $ECHO_C" >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$PANGO_CFLAGS"; then - pkg_cv_PANGO_CFLAGS="$PANGO_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pango\"") >&5 - ($PKG_CONFIG --exists --print-errors "pango") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_PANGO_CFLAGS=`$PKG_CONFIG --cflags "pango" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$PANGO_LIBS"; then - pkg_cv_PANGO_LIBS="$PANGO_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"pango\"") >&5 - ($PKG_CONFIG --exists --print-errors "pango") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_PANGO_LIBS=`$PKG_CONFIG --libs "pango" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - PANGO_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "pango"` - else - PANGO_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pango"` - fi - # Put the nasty error message in config.log where it belongs - echo "$PANGO_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (pango) were not met: - -$PANGO_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables PANGO_CFLAGS -and PANGO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (pango) were not met: - -$PANGO_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables PANGO_CFLAGS -and PANGO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables PANGO_CFLAGS -and PANGO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables PANGO_CFLAGS -and PANGO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - PANGO_CFLAGS=$pkg_cv_PANGO_CFLAGS - PANGO_LIBS=$pkg_cv_PANGO_LIBS - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - : -fi - - - - -pkg_failed=no -{ echo "$as_me:$LINENO: checking for CAIRO" >&5 -echo $ECHO_N "checking for CAIRO... $ECHO_C" >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$CAIRO_CFLAGS"; then - pkg_cv_CAIRO_CFLAGS="$CAIRO_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"cairo\"") >&5 - ($PKG_CONFIG --exists --print-errors "cairo") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_CAIRO_CFLAGS=`$PKG_CONFIG --cflags "cairo" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$CAIRO_LIBS"; then - pkg_cv_CAIRO_LIBS="$CAIRO_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"cairo\"") >&5 - ($PKG_CONFIG --exists --print-errors "cairo") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_CAIRO_LIBS=`$PKG_CONFIG --libs "cairo" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - CAIRO_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "cairo"` - else - CAIRO_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "cairo"` - fi - # Put the nasty error message in config.log where it belongs - echo "$CAIRO_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (cairo) were not met: - -$CAIRO_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables CAIRO_CFLAGS -and CAIRO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (cairo) were not met: - -$CAIRO_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables CAIRO_CFLAGS -and CAIRO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables CAIRO_CFLAGS -and CAIRO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables CAIRO_CFLAGS -and CAIRO_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - CAIRO_CFLAGS=$pkg_cv_CAIRO_CFLAGS - CAIRO_LIBS=$pkg_cv_CAIRO_LIBS - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - : -fi - - - - -pkg_failed=no -{ echo "$as_me:$LINENO: checking for GLIB2" >&5 -echo $ECHO_N "checking for GLIB2... $ECHO_C" >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$GLIB2_CFLAGS"; then - pkg_cv_GLIB2_CFLAGS="$GLIB2_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0\"") >&5 - ($PKG_CONFIG --exists --print-errors "glib-2.0") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GLIB2_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$GLIB2_LIBS"; then - pkg_cv_GLIB2_LIBS="$GLIB2_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0\"") >&5 - ($PKG_CONFIG --exists --print-errors "glib-2.0") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GLIB2_LIBS=`$PKG_CONFIG --libs "glib-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GLIB2_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0"` - else - GLIB2_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0"` - fi - # Put the nasty error message in config.log where it belongs - echo "$GLIB2_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0) were not met: - -$GLIB2_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GLIB2_CFLAGS -and GLIB2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (glib-2.0) were not met: - -$GLIB2_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GLIB2_CFLAGS -and GLIB2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GLIB2_CFLAGS -and GLIB2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GLIB2_CFLAGS -and GLIB2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - GLIB2_CFLAGS=$pkg_cv_GLIB2_CFLAGS - GLIB2_LIBS=$pkg_cv_GLIB2_LIBS - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - : -fi - - - - -pkg_failed=no -{ echo "$as_me:$LINENO: checking for GOBJECT2" >&5 -echo $ECHO_N "checking for GOBJECT2... $ECHO_C" >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$GOBJECT2_CFLAGS"; then - pkg_cv_GOBJECT2_CFLAGS="$GOBJECT2_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gobject-2.0\"") >&5 - ($PKG_CONFIG --exists --print-errors "gobject-2.0") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GOBJECT2_CFLAGS=`$PKG_CONFIG --cflags "gobject-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$GOBJECT2_LIBS"; then - pkg_cv_GOBJECT2_LIBS="$GOBJECT2_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gobject-2.0\"") >&5 - ($PKG_CONFIG --exists --print-errors "gobject-2.0") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_GOBJECT2_LIBS=`$PKG_CONFIG --libs "gobject-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GOBJECT2_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gobject-2.0"` - else - GOBJECT2_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gobject-2.0"` - fi - # Put the nasty error message in config.log where it belongs - echo "$GOBJECT2_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (gobject-2.0) were not met: - -$GOBJECT2_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GOBJECT2_CFLAGS -and GOBJECT2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (gobject-2.0) were not met: - -$GOBJECT2_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GOBJECT2_CFLAGS -and GOBJECT2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GOBJECT2_CFLAGS -and GOBJECT2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GOBJECT2_CFLAGS -and GOBJECT2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - GOBJECT2_CFLAGS=$pkg_cv_GOBJECT2_CFLAGS - GOBJECT2_LIBS=$pkg_cv_GOBJECT2_LIBS - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - : -fi - - - - -pkg_failed=no -{ echo "$as_me:$LINENO: checking for X11" >&5 -echo $ECHO_N "checking for X11... $ECHO_C" >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$X11_CFLAGS"; then - pkg_cv_X11_CFLAGS="$X11_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11\"") >&5 - ($PKG_CONFIG --exists --print-errors "x11") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_X11_CFLAGS=`$PKG_CONFIG --cflags "x11" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$X11_LIBS"; then - pkg_cv_X11_LIBS="$X11_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11\"") >&5 - ($PKG_CONFIG --exists --print-errors "x11") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_X11_LIBS=`$PKG_CONFIG --libs "x11" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - X11_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "x11"` - else - X11_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "x11"` - fi - # Put the nasty error message in config.log where it belongs - echo "$X11_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (x11) were not met: - -$X11_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (x11) were not met: - -$X11_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - X11_CFLAGS=$pkg_cv_X11_CFLAGS - X11_LIBS=$pkg_cv_X11_LIBS - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - : -fi - - - - -pkg_failed=no -{ echo "$as_me:$LINENO: checking for XINERAMA" >&5 -echo $ECHO_N "checking for XINERAMA... $ECHO_C" >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$XINERAMA_CFLAGS"; then - pkg_cv_XINERAMA_CFLAGS="$XINERAMA_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xinerama\"") >&5 - ($PKG_CONFIG --exists --print-errors "xinerama") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_XINERAMA_CFLAGS=`$PKG_CONFIG --cflags "xinerama" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$XINERAMA_LIBS"; then - pkg_cv_XINERAMA_LIBS="$XINERAMA_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xinerama\"") >&5 - ($PKG_CONFIG --exists --print-errors "xinerama") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_XINERAMA_LIBS=`$PKG_CONFIG --libs "xinerama" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - XINERAMA_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "xinerama"` - else - XINERAMA_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xinerama"` - fi - # Put the nasty error message in config.log where it belongs - echo "$XINERAMA_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (xinerama) were not met: - -$XINERAMA_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables XINERAMA_CFLAGS -and XINERAMA_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (xinerama) were not met: - -$XINERAMA_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables XINERAMA_CFLAGS -and XINERAMA_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables XINERAMA_CFLAGS -and XINERAMA_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables XINERAMA_CFLAGS -and XINERAMA_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - XINERAMA_CFLAGS=$pkg_cv_XINERAMA_CFLAGS - XINERAMA_LIBS=$pkg_cv_XINERAMA_LIBS - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - : -fi - - - - -pkg_failed=no -{ echo "$as_me:$LINENO: checking for IMLIB2" >&5 -echo $ECHO_N "checking for IMLIB2... $ECHO_C" >&6; } - -if test -n "$PKG_CONFIG"; then - if test -n "$IMLIB2_CFLAGS"; then - pkg_cv_IMLIB2_CFLAGS="$IMLIB2_CFLAGS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"imlib2\"") >&5 - ($PKG_CONFIG --exists --print-errors "imlib2") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_IMLIB2_CFLAGS=`$PKG_CONFIG --cflags "imlib2" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi -if test -n "$PKG_CONFIG"; then - if test -n "$IMLIB2_LIBS"; then - pkg_cv_IMLIB2_LIBS="$IMLIB2_LIBS" - else - if test -n "$PKG_CONFIG" && \ - { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"imlib2\"") >&5 - ($PKG_CONFIG --exists --print-errors "imlib2") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - pkg_cv_IMLIB2_LIBS=`$PKG_CONFIG --libs "imlib2" 2>/dev/null` -else - pkg_failed=yes -fi - fi -else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - IMLIB2_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "imlib2"` - else - IMLIB2_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "imlib2"` - fi - # Put the nasty error message in config.log where it belongs - echo "$IMLIB2_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (imlib2) were not met: - -$IMLIB2_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables IMLIB2_CFLAGS -and IMLIB2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (imlib2) were not met: - -$IMLIB2_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables IMLIB2_CFLAGS -and IMLIB2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} - { (exit 1); exit 1; }; } -elif test $pkg_failed = untried; then - { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables IMLIB2_CFLAGS -and IMLIB2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&5 -echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables IMLIB2_CFLAGS -and IMLIB2_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see . -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - IMLIB2_CFLAGS=$pkg_cv_IMLIB2_CFLAGS - IMLIB2_LIBS=$pkg_cv_IMLIB2_LIBS - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - : -fi - - - -# Ensure that Imlib2 has been built with X support and reset LIBS since AC_CHECK_LIB adds -lImlib2 on success. -LIBS_SAVED=$LIBS - -{ echo "$as_me:$LINENO: checking for imlib_context_set_display in -lImlib2" >&5 -echo $ECHO_N "checking for imlib_context_set_display in -lImlib2... $ECHO_C" >&6; } -if test "${ac_cv_lib_Imlib2_imlib_context_set_display+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lImlib2 $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char imlib_context_set_display (); -int -main () -{ -return imlib_context_set_display (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_Imlib2_imlib_context_set_display=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_Imlib2_imlib_context_set_display=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_Imlib2_imlib_context_set_display" >&5 -echo "${ECHO_T}$ac_cv_lib_Imlib2_imlib_context_set_display" >&6; } -if test $ac_cv_lib_Imlib2_imlib_context_set_display = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBIMLIB2 1 -_ACEOF - - LIBS="-lImlib2 $LIBS" - -else - { { echo "$as_me:$LINENO: error: Imlib2 must be built with X support" >&5 -echo "$as_me: error: Imlib2 must be built with X support" >&2;} - { (exit 1); exit 1; }; } -fi - -LIBS=$LIBS_SAVED - -# Checks for header files. -{ echo "$as_me:$LINENO: checking for X" >&5 -echo $ECHO_N "checking for X... $ECHO_C" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5 +$as_echo_n "checking for X... " >&6; } # Check whether --with-x was given. -if test "${with_x+set}" = set; then +if test "${with_x+set}" = set; then : withval=$with_x; fi @@ -12684,11 +4921,9 @@ have_x=disabled else case $x_includes,$x_libraries in #( - *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 -echo "$as_me: error: Cannot use X directory names containing '" >&2;} - { (exit 1); exit 1; }; };; #( - *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + *\'*) as_fn_error "cannot use X directory names containing '" "$LINENO" 5;; #( + *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then : + $as_echo_n "(cached) " >&6 else # One or both of the vars are not set, and there is no cached value. ac_x_includes=no ac_x_libraries=no @@ -12709,7 +4944,7 @@ eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" done # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl; do + for ac_extension in a so sl dylib la dll; do if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && test -f "$ac_im_libdir/libX11.$ac_extension"; then ac_im_usrlibdir=$ac_im_libdir; break @@ -12723,7 +4958,7 @@ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; esac case $ac_im_usrlibdir in - /usr/lib | /lib) ;; + /usr/lib | /usr/lib64 | /lib | /lib64) ;; *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; esac fi @@ -12735,21 +4970,25 @@ # Check X11 before X11Rn because it is often a symlink to the current release. ac_x_header_dirs=' /usr/X11/include +/usr/X11R7/include /usr/X11R6/include /usr/X11R5/include /usr/X11R4/include /usr/include/X11 +/usr/include/X11R7 /usr/include/X11R6 /usr/include/X11R5 /usr/include/X11R4 /usr/local/X11/include +/usr/local/X11R7/include /usr/local/X11R6/include /usr/local/X11R5/include /usr/local/X11R4/include /usr/local/include/X11 +/usr/local/include/X11R7 /usr/local/include/X11R6 /usr/local/include/X11R5 /usr/local/include/X11R4 @@ -12771,36 +5010,14 @@ if test "$ac_x_includes" = no; then # Guess where to find include files, by looking for Xlib.h. # First, try using that file with no special directory specified. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then +if ac_fn_c_try_cpp "$LINENO"; then : # We can compile using X headers with no special include directory. ac_x_includes= else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - for ac_dir in $ac_x_header_dirs; do if test -r "$ac_dir/X11/Xlib.h"; then ac_x_includes=$ac_dir @@ -12808,7 +5025,6 @@ fi done fi - rm -f conftest.err conftest.$ac_ext fi # $ac_x_includes = no @@ -12818,11 +5034,7 @@ # Don't add to $LIBS permanently. ac_save_LIBS=$LIBS LIBS="-lX11 $LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -12833,36 +5045,16 @@ return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then +if ac_fn_c_try_link "$LINENO"; then : LIBS=$ac_save_LIBS # We can link X programs with no special library path. ac_x_libraries= else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - LIBS=$ac_save_LIBS -for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` + LIBS=$ac_save_LIBS +for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` do # Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do + for ac_extension in a so sl dylib la dll; do if test -r "$ac_dir/libX11.$ac_extension"; then ac_x_libraries=$ac_dir break 2 @@ -12870,9 +5062,8 @@ done done fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi # $ac_x_libraries = no case $ac_x_includes,$ac_x_libraries in #( @@ -12893,8 +5084,8 @@ fi # $with_x != no if test "$have_x" != yes; then - { echo "$as_me:$LINENO: result: $have_x" >&5 -echo "${ECHO_T}$have_x" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5 +$as_echo "$have_x" >&6; } no_x=yes else # If each of the values was on the command line, it overrides each guess. @@ -12904,707 +5095,263 @@ ac_cv_have_x="have_x=yes\ ac_x_includes='$x_includes'\ ac_x_libraries='$x_libraries'" - { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 -echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } -fi - - - - - - -for ac_header in fcntl.h stdlib.h string.h sys/time.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -else - # Is the header compilable? -{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6; } - -# Is the header present? -{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ---------------------------------------------------- ## -## Report this to http://code.google.com/p/tint2/issues ## -## ---------------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# Checks for typedefs, structures, and compiler characteristics. - - { echo "$as_me:$LINENO: checking for int16_t" >&5 -echo $ECHO_N "checking for int16_t... $ECHO_C" >&6; } -if test "${ac_cv_c_int16_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_c_int16_t=no - for ac_type in 'int16_t' 'int' 'long int' \ - 'long long int' 'short int' 'signed char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 1))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 1) - < ($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 2))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - case $ac_type in - int16_t) ac_cv_c_int16_t=yes ;; - *) ac_cv_c_int16_t=$ac_type ;; -esac - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_int16_t" != no && break - done + { $as_echo "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5 +$as_echo "libraries $x_libraries, headers $x_includes" >&6; } fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_int16_t" >&5 -echo "${ECHO_T}$ac_cv_c_int16_t" >&6; } - case $ac_cv_c_int16_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<_ACEOF -#define int16_t $ac_cv_c_int16_t -_ACEOF -;; - esac - - - { echo "$as_me:$LINENO: checking for int64_t" >&5 -echo $ECHO_N "checking for int64_t... $ECHO_C" >&6; } -if test "${ac_cv_c_int64_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_c_int64_t=no - for ac_type in 'int64_t' 'int' 'long int' \ - 'long long int' 'short int' 'signed char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 1))]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 1) - < ($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 2))]; -test_array [0] = 0 - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if test "${ac_cv_path_GREP+set}" = set; then : + $as_echo_n "(cached) " >&6 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - case $ac_type in - int64_t) ac_cv_c_int64_t=yes ;; - *) ac_cv_c_int64_t=$ac_type ;; + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - + ac_cv_path_GREP=$GREP fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_int64_t" != no && break - done fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_int64_t" >&5 -echo "${ECHO_T}$ac_cv_c_int64_t" >&6; } - case $ac_cv_c_int64_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<_ACEOF -#define int64_t $ac_cv_c_int64_t -_ACEOF -;; - esac - - - { echo "$as_me:$LINENO: checking for int8_t" >&5 -echo $ECHO_N "checking for int8_t... $ECHO_C" >&6; } -if test "${ac_cv_c_int8_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_c_int8_t=no - for ac_type in 'int8_t' 'int' 'long int' \ - 'long long int' 'short int' 'signed char'; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (8 - 2)) - 1) * 2 + 1))]; -test_array [0] = 0 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (8 - 2)) - 1) * 2 + 1) - < ($ac_type) (((($ac_type) 1 << (8 - 2)) - 1) * 2 + 2))]; -test_array [0] = 0 - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then : + $as_echo_n "(cached) " >&6 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - case $ac_type in - int8_t) ac_cv_c_int8_t=yes ;; - *) ac_cv_c_int8_t=$ac_type ;; + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - + ac_cv_path_EGREP=$EGREP fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_int8_t" != no && break - done + fi fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_int8_t" >&5 -echo "${ECHO_T}$ac_cv_c_int8_t" >&6; } - case $ac_cv_c_int8_t in #( - no|yes) ;; #( - *) +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" -cat >>confdefs.h <<_ACEOF -#define int8_t $ac_cv_c_int8_t -_ACEOF -;; - esac -{ echo "$as_me:$LINENO: checking for pid_t" >&5 -echo $ECHO_N "checking for pid_t... $ECHO_C" >&6; } -if test "${ac_cv_type_pid_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -typedef pid_t ac__type_new_; +#include +#include +#include +#include + int main () { -if ((ac__type_new_ *) 0) - return 0; -if (sizeof (ac__type_new_)) - return 0; + ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_type_pid_t=yes +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_pid_t=no + ac_cv_header_stdc=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 -echo "${ECHO_T}$ac_cv_type_pid_t" >&6; } -if test $ac_cv_type_pid_t = yes; then - : -else - -cat >>confdefs.h <<_ACEOF -#define pid_t int -_ACEOF - -fi - - -# Checks for library functions. -for ac_header in vfork.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -else - # Is the header compilable? -{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +#include + _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : - ac_header_compiler=no +else + ac_cv_header_stdc=no fi +rm -f conftest* -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6; } +fi -# Is the header present? -{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include <$ac_header> +#include + _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_header_stdc=no +fi +rm -f conftest* - ac_header_preproc=no fi -rm -f conftest.err conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6; } +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ---------------------------------------------------- ## -## Report this to http://code.google.com/p/tint2/issues ## -## ---------------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 else - eval "$as_ac_Header=\$ac_header_preproc" + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +eval as_val=\$$as_ac_Header + if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi @@ -13612,114 +5359,213 @@ done - -for ac_func in fork vfork -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +for ac_header in fcntl.h locale.h stdlib.h string.h sys/time.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +eval as_val=\$$as_ac_Header + if test "x$as_val" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ +fi -#ifdef __STDC__ -# include -#else -# include -#endif +done -#undef $ac_func -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif +# Checks for typedefs, structures, and compiler characteristics. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5 +$as_echo_n "checking for stdbool.h that conforms to C99... " >&6; } +if test "${ac_cv_header_stdbool_h+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifndef bool + "error: bool is not defined" +#endif +#ifndef false + "error: false is not defined" +#endif +#if false + "error: false is not 0" +#endif +#ifndef true + "error: true is not defined" +#endif +#if true != 1 + "error: true is not 1" +#endif +#ifndef __bool_true_false_are_defined + "error: __bool_true_false_are_defined is not defined" +#endif + + struct s { _Bool s: 1; _Bool t; } s; + + char a[true == 1 ? 1 : -1]; + char b[false == 0 ? 1 : -1]; + char c[__bool_true_false_are_defined == 1 ? 1 : -1]; + char d[(bool) 0.5 == true ? 1 : -1]; + bool e = &s; + char f[(_Bool) 0.0 == false ? 1 : -1]; + char g[true]; + char h[sizeof (_Bool)]; + char i[sizeof s.t]; + enum { j = false, k = true, l = false * true, m = true * 256 }; + /* The following fails for + HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */ + _Bool n[m]; + char o[sizeof n == m * sizeof n[0] ? 1 : -1]; + char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1]; +# if defined __xlc__ || defined __GNUC__ + /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0 + reported by James Lemley on 2005-10-05; see + http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html + This test is not quite right, since xlc is allowed to + reject this program, as the initializer for xlcbug is + not one of the forms that C requires support for. + However, doing the test right would require a runtime + test, and that would make cross-compilation harder. + Let us hope that IBM fixes the xlc bug, and also adds + support for this kind of constant expression. In the + meantime, this test will reject xlc, which is OK, since + our stdbool.h substitute should suffice. We also test + this with GCC, where it should work, to detect more + quickly whether someone messes up the test in the + future. */ + char digs[] = "0123456789"; + int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1); +# endif + /* Catch a bug in an HP-UX C compiler. See + http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html + http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html + */ + _Bool q = true; + _Bool *pq = &q; int main () { -return $ac_func (); + + *pq |= q; + *pq |= ! q; + /* Refer to every declared value, to avoid compiler optimizations. */ + return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l + + !m + !n + !o + !p + !q + !pq); + ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdbool_h=yes +else + ac_cv_header_stdbool_h=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5 +$as_echo "$ac_cv_header_stdbool_h" >&6; } +ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default" +if test "x$ac_cv_type__Bool" = x""yes; then : + +cat >>confdefs.h <<_ACEOF +#define HAVE__BOOL 1 +_ACEOF + + +fi + +if test $ac_cv_header_stdbool_h = yes; then + +$as_echo "#define HAVE_STDBOOL_H 1" >>confdefs.h + +fi + +ac_fn_c_find_intX_t "$LINENO" "16" "ac_cv_c_int16_t" +case $ac_cv_c_int16_t in #( + no|yes) ;; #( + *) + +cat >>confdefs.h <<_ACEOF +#define int16_t $ac_cv_c_int16_t +_ACEOF +;; esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "$as_ac_var=yes" + +ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t" +case $ac_cv_c_int64_t in #( + no|yes) ;; #( + *) + +cat >>confdefs.h <<_ACEOF +#define int64_t $ac_cv_c_int64_t +_ACEOF +;; +esac + +ac_fn_c_find_intX_t "$LINENO" "8" "ac_cv_c_int8_t" +case $ac_cv_c_int8_t in #( + no|yes) ;; #( + *) + +cat >>confdefs.h <<_ACEOF +#define int8_t $ac_cv_c_int8_t +_ACEOF +;; +esac + +ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" +if test "x$ac_cv_type_pid_t" = x""yes; then : + else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - eval "$as_ac_var=no" +cat >>confdefs.h <<_ACEOF +#define pid_t int +_ACEOF + fi -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext + +# Checks for library functions. +for ac_header in vfork.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default" +if test "x$ac_cv_header_vfork_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_VFORK_H 1 +_ACEOF + fi -ac_res=`eval echo '${'$as_ac_var'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_var'}'` = yes; then + +done + +for ac_func in fork vfork +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +eval as_val=\$$as_ac_var + if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done if test "x$ac_cv_func_fork" = xyes; then - { echo "$as_me:$LINENO: checking for working fork" >&5 -echo $ECHO_N "checking for working fork... $ECHO_C" >&6; } -if test "${ac_cv_func_fork_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5 +$as_echo_n "checking for working fork... " >&6; } +if test "${ac_cv_func_fork_works+set}" = set; then : + $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_func_fork_works=cross else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int @@ -13733,42 +5579,18 @@ return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_fork_works=yes else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_fork_works=no + ac_cv_func_fork_works=no fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi -{ echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5 -echo "${ECHO_T}$ac_cv_func_fork_works" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5 +$as_echo "$ac_cv_func_fork_works" >&6; } else ac_cv_func_fork_works=$ac_cv_func_fork @@ -13783,24 +5605,20 @@ ac_cv_func_fork_works=yes ;; esac - { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 -echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 +$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} fi ac_cv_func_vfork_works=$ac_cv_func_vfork if test "x$ac_cv_func_vfork" = xyes; then - { echo "$as_me:$LINENO: checking for working vfork" >&5 -echo $ECHO_N "checking for working vfork... $ECHO_C" >&6; } -if test "${ac_cv_func_vfork_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5 +$as_echo_n "checking for working vfork... " >&6; } +if test "${ac_cv_func_vfork_works+set}" = set; then : + $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_func_vfork_works=cross else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Thanks to Paul Eggert for this test. */ $ac_includes_default @@ -13892,343 +5710,411 @@ } } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_vfork_works=yes else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_vfork_works=no + ac_cv_func_vfork_works=no fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi -{ echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5 -echo "${ECHO_T}$ac_cv_func_vfork_works" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5 +$as_echo "$ac_cv_func_vfork_works" >&6; } fi; if test "x$ac_cv_func_fork_works" = xcross; then ac_cv_func_vfork_works=$ac_cv_func_vfork - { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 -echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 +$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} fi if test "x$ac_cv_func_vfork_works" = xyes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_WORKING_VFORK 1 -_ACEOF +$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h else -cat >>confdefs.h <<\_ACEOF -#define vfork fork -_ACEOF +$as_echo "#define vfork fork" >>confdefs.h fi if test "x$ac_cv_func_fork_works" = xyes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_WORKING_FORK 1 +$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h + +fi + +for ac_header in stdlib.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" +if test "x$ac_cv_header_stdlib_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_STDLIB_H 1 _ACEOF fi +done -for ac_header in stdlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5 +$as_echo_n "checking for GNU libc compatible malloc... " >&6; } +if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then : + $as_echo_n "(cached) " >&6 else - # Is the header compilable? -{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + if test "$cross_compiling" = yes; then : + ac_cv_func_malloc_0_nonnull=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +#if defined STDC_HEADERS || defined HAVE_STDLIB_H +# include +#else +char *malloc (); +#endif + +int +main () +{ +return ! malloc (0); + ; + return 0; +} _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_malloc_0_nonnull=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_func_malloc_0_nonnull=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi - ac_header_compiler=no fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5 +$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } +if test $ac_cv_func_malloc_0_nonnull = yes; then : -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6; } +$as_echo "#define HAVE_MALLOC 1" >>confdefs.h -# Is the header present? -{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +else + $as_echo "#define HAVE_MALLOC 0" >>confdefs.h + + case " $LIBOBJS " in + *" malloc.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS malloc.$ac_objext" + ;; +esac + + +$as_echo "#define malloc rpl_malloc" >>confdefs.h + +fi + + +for ac_header in stdlib.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" +if test "x$ac_cv_header_stdlib_h" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_STDLIB_H 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + +fi + +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible realloc" >&5 +$as_echo_n "checking for GNU libc compatible realloc... " >&6; } +if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_realloc_0_nonnull=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#include <$ac_header> +#if defined STDC_HEADERS || defined HAVE_STDLIB_H +# include +#else +char *realloc (); +#endif + +int +main () +{ +return ! realloc (0, 0); + ; + return 0; +} _ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_realloc_0_nonnull=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_cv_func_realloc_0_nonnull=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi - ac_header_preproc=no fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_realloc_0_nonnull" >&5 +$as_echo "$ac_cv_func_realloc_0_nonnull" >&6; } +if test $ac_cv_func_realloc_0_nonnull = yes; then : -rm -f conftest.err conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6; } +$as_echo "#define HAVE_REALLOC 1" >>confdefs.h -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ---------------------------------------------------- ## -## Report this to http://code.google.com/p/tint2/issues ## -## ---------------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 else - eval "$as_ac_Header=\$ac_header_preproc" + $as_echo "#define HAVE_REALLOC 0" >>confdefs.h + + case " $LIBOBJS " in + *" realloc.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS realloc.$ac_objext" + ;; +esac + + +$as_echo "#define realloc rpl_realloc" >>confdefs.h + fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then + +for ac_func in alarm gettimeofday memset select setlocale strcasecmp strchr strdup +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +eval as_val=\$$as_ac_var + if test "x$as_val" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + +# tint2conf (experimental) +if test "x$tint2conf" = xtrue; +then + # We want just link against stuff we really need so thats why I don't use PKG_CHECK_MODULES. + # gtk/glib is a bit horrible because we have to add -I directives for various features (like cairo, pango etc.) + # even if we don't need them. + # Sorry if that might be confusing %-) + + for ac_func in strndup strrchr strstr +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +eval as_val=\$$as_ac_var + if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi - done -{ echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 -echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6; } -if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_malloc_0_nonnull=no + # Save LIBS value and clear the variable, AC_CHECK_LIB will append all libs to LIBS on success. + LIBS_SAVED=$LIBS + LIBS= + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lpthread" >&5 +$as_echo_n "checking for pthread_create in -lpthread... " >&6; } +if test "${ac_cv_lib_pthread_pthread_create+set}" = set; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -#if defined STDC_HEADERS || defined HAVE_STDLIB_H -# include -#else -char *malloc (); -#endif +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_create (); int main () { -return ! malloc (0); +return pthread_create (); ; return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_malloc_0_nonnull=yes +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_pthread_pthread_create=yes else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_malloc_0_nonnull=no + ac_cv_lib_pthread_pthread_create=no fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_create" >&5 +$as_echo "$ac_cv_lib_pthread_pthread_create" >&6; } +if test "x$ac_cv_lib_pthread_pthread_create" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBPTHREAD 1 +_ACEOF + LIBS="-lpthread $LIBS" +else + as_fn_error "libpthread is missing, usually provided by glibc" "$LINENO" 5 fi -{ echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 -echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6; } -if test $ac_cv_func_malloc_0_nonnull = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_MALLOC 1 -_ACEOF + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for g_free in -lglib-2.0" >&5 +$as_echo_n "checking for g_free in -lglib-2.0... " >&6; } +if test "${ac_cv_lib_glib_2_0_g_free+set}" = set; then : + $as_echo_n "(cached) " >&6 else - cat >>confdefs.h <<\_ACEOF -#define HAVE_MALLOC 0 -_ACEOF - - case " $LIBOBJS " in - *" malloc.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS malloc.$ac_objext" - ;; -esac - + ac_check_lib_save_LIBS=$LIBS +LIBS="-lglib-2.0 $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -cat >>confdefs.h <<\_ACEOF -#define malloc rpl_malloc +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char g_free (); +int +main () +{ +return g_free (); + ; + return 0; +} _ACEOF - +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_glib_2_0_g_free=yes +else + ac_cv_lib_glib_2_0_g_free=no fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_glib_2_0_g_free" >&5 +$as_echo "$ac_cv_lib_glib_2_0_g_free" >&6; } +if test "x$ac_cv_lib_glib_2_0_g_free" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBGLIB_2_0 1 +_ACEOF + LIBS="-lglib-2.0 $LIBS" +else + as_fn_error "glib-2.x is missing" "$LINENO" 5 +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for g_signal_connect_data in -lgobject-2.0" >&5 +$as_echo_n "checking for g_signal_connect_data in -lgobject-2.0... " >&6; } +if test "${ac_cv_lib_gobject_2_0_g_signal_connect_data+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lgobject-2.0 $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char g_signal_connect_data (); +int +main () +{ +return g_signal_connect_data (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_gobject_2_0_g_signal_connect_data=yes +else + ac_cv_lib_gobject_2_0_g_signal_connect_data=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gobject_2_0_g_signal_connect_data" >&5 +$as_echo "$ac_cv_lib_gobject_2_0_g_signal_connect_data" >&6; } +if test "x$ac_cv_lib_gobject_2_0_g_signal_connect_data" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBGOBJECT_2_0 1 +_ACEOF + LIBS="-lgobject-2.0 $LIBS" +else + as_fn_error "libgobject-2.0 is missing, usually provided by glib-2.x" "$LINENO" 5 +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gtk_main in -lgtk-x11-2.0" >&5 +$as_echo_n "checking for gtk_main in -lgtk-x11-2.0... " >&6; } +if test "${ac_cv_lib_gtk_x11_2_0_gtk_main+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lgtk-x11-2.0 $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - - -for ac_func in gettimeofday memset select setlocale strcasecmp strchr strdup -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char gtk_main (); +int +main () +{ +return gtk_main (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_gtk_x11_2_0_gtk_main=yes else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ + ac_cv_lib_gtk_x11_2_0_gtk_main=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gtk_x11_2_0_gtk_main" >&5 +$as_echo "$ac_cv_lib_gtk_x11_2_0_gtk_main" >&6; } +if test "x$ac_cv_lib_gtk_x11_2_0_gtk_main" = x""yes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBGTK_X11_2_0 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ + LIBS="-lgtk-x11-2.0 $LIBS" -#ifdef __STDC__ -# include -#else -# include -#endif +else + as_fn_error "gtk+-2.x is missing or not built with X support" "$LINENO" 5 +fi -#undef $ac_func + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for g_thread_init in -lgthread-2.0" >&5 +$as_echo_n "checking for g_thread_init in -lgthread-2.0... " >&6; } +if test "${ac_cv_lib_gthread_2_0_g_thread_init+set}" = set; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lgthread-2.0 $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC @@ -14236,108 +6122,114 @@ #ifdef __cplusplus extern "C" #endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - +char g_thread_init (); int main () { -return $ac_func (); +return g_thread_init (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "$as_ac_var=yes" +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_gthread_2_0_g_thread_init=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" + ac_cv_lib_gthread_2_0_g_thread_init=no fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS fi -ac_res=`eval echo '${'$as_ac_var'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_var'}'` = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gthread_2_0_g_thread_init" >&5 +$as_echo "$ac_cv_lib_gthread_2_0_g_thread_init" >&6; } +if test "x$ac_cv_lib_gthread_2_0_g_thread_init" = x""yes; then : cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define HAVE_LIBGTHREAD_2_0 1 _ACEOF + LIBS="-lgthread-2.0 $LIBS" + +else + as_fn_error "libgthread-2.0 is missing, usually provided by glib-2.x" "$LINENO" 5 fi -done -# Check whether --enable-battery was given. -if test "${enable_battery+set}" = set; then - enableval=$enable_battery; case "${enableval}" in - yes) battery=true ;; - no) battery=false ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --disable-battery" >&5 -echo "$as_me: error: bad value ${enableval} for --disable-battery" >&2;} - { (exit 1); exit 1; }; } ;; - esac + TINT2CONF_LIBS="${LIBS} ${PTHREAD_LIB} ${GLIB2_LIB} ${GOBJECT2_LIB} ${IMLIB2_LIBS}" + LIBS=$LIBS_SAVED + + TINT2CONF_CFLAGS="$(${PKG_CONFIG} --cflags gtk+-x11-2.0 glib-2.0 gobject-2.0 gthread-2.0) ${IMLIB2_CFLAGS}" + + + + # Python stuff + # Extract the first word of "python", so it can be a program name with args. +set dummy python; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_path___PYTHON+set}" = set; then : + $as_echo_n "(cached) " >&6 else - battery=true -fi + case $__PYTHON in + [\\/]* | ?:[\\/]*) + ac_cv_path___PYTHON="$__PYTHON" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path___PYTHON="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - if test x$battery = xtrue; then - ENABLE_BATTERY_TRUE= - ENABLE_BATTERY_FALSE='#' + ;; +esac +fi +__PYTHON=$ac_cv_path___PYTHON +if test -n "$__PYTHON"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $__PYTHON" >&5 +$as_echo "$__PYTHON" >&6; } else - ENABLE_BATTERY_TRUE='#' - ENABLE_BATTERY_FALSE= + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -# Check whether --enable-examples was given. -if test "${enable_examples+set}" = set; then - enableval=$enable_examples; case "${enableval}" in - yes) examples=true ;; - no) examples=false ;; - *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-examples" >&5 -echo "$as_me: error: bad value ${enableval} for --enable-examples" >&2;} - { (exit 1); exit 1; }; } ;; - esac -else - examples=false -fi + if test -z "${__PYTHON}"; + then + as_fn_error "tint2conf requires python to be installed" "$LINENO" 5 + fi - if test x$examples = xtrue; then - INSTALL_EXAMPLES_TRUE= - INSTALL_EXAMPLES_FALSE='#' + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"pygtk-2.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "pygtk-2.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + : else - INSTALL_EXAMPLES_TRUE='#' - INSTALL_EXAMPLES_FALSE= + as_fn_error "tint2conf requires >=pygtk-2.0" "$LINENO" 5 +fi fi +# + +# +AM_CFLAGS="-Wall" +AM_LDFLAGS="-Wl,--as-needed" + -ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile" +DISTCLEANFILES="Makefile.in" + + +ac_config_files="$ac_config_files Makefile doc/Makefile sample/Makefile src/Makefile src/tint2conf/Makefile src/version.h" cat >confcache <<\_ACEOF @@ -14367,12 +6259,13 @@ case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -14380,8 +6273,8 @@ (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" @@ -14404,12 +6297,12 @@ if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && - { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -echo "$as_me: updating cache $cache_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else - { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -echo "$as_me: not updating unwritable cache $cache_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache @@ -14425,52 +6318,54 @@ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`echo "$ac_i" | sed "$ac_script"` + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= fi + if test -z "${ENABLE_BATTERY_TRUE}" && test -z "${ENABLE_BATTERY_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"ENABLE_BATTERY\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"ENABLE_BATTERY\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"ENABLE_BATTERY\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${INSTALL_EXAMPLES_TRUE}" && test -z "${INSTALL_EXAMPLES_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"INSTALL_EXAMPLES\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"INSTALL_EXAMPLES\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error "conditional \"INSTALL_EXAMPLES\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_TINT2CONF_TRUE}" && test -z "${ENABLE_TINT2CONF_FALSE}"; then + as_fn_error "conditional \"ENABLE_TINT2CONF\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : ${CONFIG_STATUS=./config.status} +ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -14480,59 +6375,79 @@ debug=false ac_cs_recheck=false ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; esac - fi - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' fi - rm -f conf$$.sh + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } fi @@ -14541,20 +6456,18 @@ # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) -as_nl=' -' IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -14565,32 +6478,111 @@ as_myself=$0 fi if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error ERROR [LINENO LOG_FD] +# --------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with status $?, using 1 if that was 0. +as_fn_error () +{ + as_status=$?; test $as_status -eq 0 && as_status=1 + if test "$3"; then + as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 + fi + $as_echo "$as_me: error: $1" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done -# Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -14604,13 +6596,17 @@ as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | +$as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q @@ -14625,104 +6621,103 @@ } s/.*/./; q'` -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir - mkdir conf$$.dir + mkdir conf$$.dir 2>/dev/null fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln + fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" + + +} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false @@ -14739,12 +6734,12 @@ as_test_x=' eval sh -c '\'' if test -d "$1"; then - test -d "$1/."; + test -d "$1/."; else - case $1 in - -*)set "./$1";; + case $1 in #( + -*)set "./$1";; esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' @@ -14759,13 +6754,19 @@ exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -# Save the log message, to keep $[0] and so on meaningful, and to +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by tint2 $as_me 0.7.1, which was -generated by GNU Autoconf 2.61. Invocation command line was +This file was extended by tint2 $as_me 0.9rc1, which was +generated by GNU Autoconf 2.65. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -14778,7 +6779,16 @@ _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" @@ -14786,22 +6796,25 @@ _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. -Usage: $0 [OPTIONS] [FILE]... +Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit - -q, --quiet do not print progress messages + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE Configuration files: $config_files @@ -14812,16 +6825,17 @@ Configuration commands: $config_commands -Report bugs to ." +Report bugs to ." _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -tint2 config.status 0.7.1 -configured by $0, generated by GNU Autoconf 2.61, - with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" +tint2 config.status 0.9rc1 +configured by $0, generated by GNU Autoconf 2.65, + with options \\"\$ac_cs_config\\" -Copyright (C) 2006 Free Software Foundation, Inc. +Copyright (C) 2009 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -14829,11 +6843,12 @@ srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do @@ -14855,34 +6870,40 @@ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - echo "$ac_cs_version"; exit ;; + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header - { echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; };; + as_fn_error "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; --help | --hel | -h ) - echo "$ac_cs_usage"; exit ;; + $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. - -*) { echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; + -*) as_fn_error "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; - *) ac_config_targets="$ac_config_targets $1" + *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac @@ -14897,303 +6918,52 @@ fi _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then - echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - CONFIG_SHELL=$SHELL + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' export CONFIG_SHELL - exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + exec "\$@" fi _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX - echo "$ac_log" + $as_echo "$ac_log" } >&5 _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' -macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' -enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' -enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' -pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' -host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' -host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' -host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' -build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' -build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' -build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' -SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' -Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' -GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' -EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' -FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' -LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' -NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' -LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' -ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' -exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' -lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' -reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' -AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' -STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' -RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' -CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' -compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' -GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' -objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' -SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' -ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' -need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' -LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' -OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' -libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' -module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' -fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' -need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' -version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' -runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' -libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' -soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' -finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' -old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' -striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# Quote evaled strings. -for var in SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -deplibs_check_method \ -file_magic_cmd \ -AR \ -AR_FLAGS \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -SHELL \ -ECHO \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_wl \ -lt_prog_compiler_pic \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_flag_spec_ld \ -hardcode_libdir_separator \ -fix_srcfile_path \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Fix-up fallback echo if it was mangled by the above quoting rules. -case \$lt_ECHO in -*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` - ;; -esac - -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' - - - AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; + "sample/Makefile") CONFIG_FILES="$CONFIG_FILES sample/Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "src/tint2conf/Makefile") CONFIG_FILES="$CONFIG_FILES src/tint2conf/Makefile" ;; + "src/version.h") CONFIG_FILES="$CONFIG_FILES src/version.h" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; + *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done @@ -15220,7 +6990,7 @@ trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 + trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. @@ -15231,233 +7001,139 @@ { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -# -# Set up the sed scripts for CONFIG_FILES section. -# +} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then -_ACEOF - - - -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - cat >conf$$subs.sed <<_ACEOF -SHELL!$SHELL$ac_delim -PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -PACKAGE_NAME!$PACKAGE_NAME$ac_delim -PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -PACKAGE_STRING!$PACKAGE_STRING$ac_delim -PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -exec_prefix!$exec_prefix$ac_delim -prefix!$prefix$ac_delim -program_transform_name!$program_transform_name$ac_delim -bindir!$bindir$ac_delim -sbindir!$sbindir$ac_delim -libexecdir!$libexecdir$ac_delim -datarootdir!$datarootdir$ac_delim -datadir!$datadir$ac_delim -sysconfdir!$sysconfdir$ac_delim -sharedstatedir!$sharedstatedir$ac_delim -localstatedir!$localstatedir$ac_delim -includedir!$includedir$ac_delim -oldincludedir!$oldincludedir$ac_delim -docdir!$docdir$ac_delim -infodir!$infodir$ac_delim -htmldir!$htmldir$ac_delim -dvidir!$dvidir$ac_delim -pdfdir!$pdfdir$ac_delim -psdir!$psdir$ac_delim -libdir!$libdir$ac_delim -localedir!$localedir$ac_delim -mandir!$mandir$ac_delim -DEFS!$DEFS$ac_delim -ECHO_C!$ECHO_C$ac_delim -ECHO_N!$ECHO_N$ac_delim -ECHO_T!$ECHO_T$ac_delim -LIBS!$LIBS$ac_delim -build_alias!$build_alias$ac_delim -host_alias!$host_alias$ac_delim -target_alias!$target_alias$ac_delim -LIBTOOL!$LIBTOOL$ac_delim -build!$build$ac_delim -build_cpu!$build_cpu$ac_delim -build_vendor!$build_vendor$ac_delim -build_os!$build_os$ac_delim -host!$host$ac_delim -host_cpu!$host_cpu$ac_delim -host_vendor!$host_vendor$ac_delim -host_os!$host_os$ac_delim -CC!$CC$ac_delim -CFLAGS!$CFLAGS$ac_delim -LDFLAGS!$LDFLAGS$ac_delim -CPPFLAGS!$CPPFLAGS$ac_delim -ac_ct_CC!$ac_ct_CC$ac_delim -EXEEXT!$EXEEXT$ac_delim -OBJEXT!$OBJEXT$ac_delim -SED!$SED$ac_delim -GREP!$GREP$ac_delim -EGREP!$EGREP$ac_delim -FGREP!$FGREP$ac_delim -LD!$LD$ac_delim -DUMPBIN!$DUMPBIN$ac_delim -ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim -NM!$NM$ac_delim -LN_S!$LN_S$ac_delim -AR!$AR$ac_delim -STRIP!$STRIP$ac_delim -RANLIB!$RANLIB$ac_delim -lt_ECHO!$lt_ECHO$ac_delim -DSYMUTIL!$DSYMUTIL$ac_delim -NMEDIT!$NMEDIT$ac_delim -LIPO!$LIPO$ac_delim -OTOOL!$OTOOL$ac_delim -OTOOL64!$OTOOL64$ac_delim -CPP!$CPP$ac_delim -INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim -INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim -INSTALL_DATA!$INSTALL_DATA$ac_delim -am__isrc!$am__isrc$ac_delim -CYGPATH_W!$CYGPATH_W$ac_delim -PACKAGE!$PACKAGE$ac_delim -VERSION!$VERSION$ac_delim -ACLOCAL!$ACLOCAL$ac_delim -AUTOCONF!$AUTOCONF$ac_delim -AUTOMAKE!$AUTOMAKE$ac_delim -AUTOHEADER!$AUTOHEADER$ac_delim -MAKEINFO!$MAKEINFO$ac_delim -install_sh!$install_sh$ac_delim -INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim -mkdir_p!$mkdir_p$ac_delim -AWK!$AWK$ac_delim -SET_MAKE!$SET_MAKE$ac_delim -am__leading_dot!$am__leading_dot$ac_delim -AMTAR!$AMTAR$ac_delim -am__tar!$am__tar$ac_delim -am__untar!$am__untar$ac_delim -DEPDIR!$DEPDIR$ac_delim -am__include!$am__include$ac_delim -am__quote!$am__quote$ac_delim -AMDEP_TRUE!$AMDEP_TRUE$ac_delim -_ACEOF - - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then - break - elif $ac_last_try; then - { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -if test -n "$ac_eof"; then - ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` - ac_eof=`expr $ac_eof + 1` +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\r' +else + ac_cs_awk_cr=$ac_cr fi -cat >>$CONFIG_STATUS <<_ACEOF -cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -_ACEOF -sed ' -s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -s/^/s,@/; s/!/@,|#_!!_#|/ -:n -t n -s/'"$ac_delim"'$/,g/; t -s/$/\\/; p -N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF -CEOF$ac_eof +echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do - cat >conf$$subs.sed <<_ACEOF -AMDEP_FALSE!$AMDEP_FALSE$ac_delim -AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim -CCDEPMODE!$CCDEPMODE$ac_delim -am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim -am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim -PKG_CONFIG!$PKG_CONFIG$ac_delim -PANGOCAIRO_CFLAGS!$PANGOCAIRO_CFLAGS$ac_delim -PANGOCAIRO_LIBS!$PANGOCAIRO_LIBS$ac_delim -PANGO_CFLAGS!$PANGO_CFLAGS$ac_delim -PANGO_LIBS!$PANGO_LIBS$ac_delim -CAIRO_CFLAGS!$CAIRO_CFLAGS$ac_delim -CAIRO_LIBS!$CAIRO_LIBS$ac_delim -GLIB2_CFLAGS!$GLIB2_CFLAGS$ac_delim -GLIB2_LIBS!$GLIB2_LIBS$ac_delim -GOBJECT2_CFLAGS!$GOBJECT2_CFLAGS$ac_delim -GOBJECT2_LIBS!$GOBJECT2_LIBS$ac_delim -X11_CFLAGS!$X11_CFLAGS$ac_delim -X11_LIBS!$X11_LIBS$ac_delim -XINERAMA_CFLAGS!$XINERAMA_CFLAGS$ac_delim -XINERAMA_LIBS!$XINERAMA_LIBS$ac_delim -IMLIB2_CFLAGS!$IMLIB2_CFLAGS$ac_delim -IMLIB2_LIBS!$IMLIB2_LIBS$ac_delim -XMKMF!$XMKMF$ac_delim -LIBOBJS!$LIBOBJS$ac_delim -ENABLE_BATTERY_TRUE!$ENABLE_BATTERY_TRUE$ac_delim -ENABLE_BATTERY_FALSE!$ENABLE_BATTERY_FALSE$ac_delim -INSTALL_EXAMPLES_TRUE!$INSTALL_EXAMPLES_TRUE$ac_delim -INSTALL_EXAMPLES_FALSE!$INSTALL_EXAMPLES_FALSE$ac_delim -LTLIBOBJS!$LTLIBOBJS$ac_delim -_ACEOF + . ./conf$$subs.sh || + as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 29; then + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done +rm -f conf$$subs.sh -ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -if test -n "$ac_eof"; then - ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` - ac_eof=`expr $ac_eof + 1` -fi - -cat >>$CONFIG_STATUS <<_ACEOF -cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -_ACEOF -sed ' -s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -s/^/s,@/; s/!/@,|#_!!_#|/ -:n -t n -s/'"$ac_delim"'$/,g/; t -s/$/\\/; p -N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF -:end -s/|#_!!_#|//g -CEOF$ac_eof +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || as_fn_error "could not setup config files machinery" "$LINENO" 5 +_ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and @@ -15474,20 +7150,128 @@ }' fi -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then + break + elif $ac_last_try; then + as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + -for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -echo "$as_me: error: Invalid tag $ac_tag." >&2;} - { (exit 1); exit 1; }; };; + :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -15515,26 +7299,34 @@ [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; + as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac - ac_file_inputs="$ac_file_inputs $ac_f" + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ - configure_input="Generated from "`IFS=: - echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin";; + *:-:* | *:-) cat >"$tmp/stdin" \ + || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac @@ -15544,42 +7336,7 @@ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | +$as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -15597,20 +7354,15 @@ q } s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } + as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; @@ -15655,12 +7407,12 @@ esac _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= - -case `sed -n '/datarootdir/ { +ac_sed_dataroot=' +/datarootdir/ { p q } @@ -15668,36 +7420,37 @@ /@docdir@/p /@infodir@/p /@localedir@/p -/@mandir@/p -' $ac_file_inputs` in +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; + s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub $extrasub _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s&@configure_input@&$configure_input&;t t +s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t @@ -15708,121 +7461,50 @@ s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack -" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || as_fn_error "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 -echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in - -) cat "$tmp/out"; rm -f "$tmp/out";; - *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; - esac + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; :H) - # - # CONFIG_HEADER - # -_ACEOF - -# Transform confdefs.h into a sed script `conftest.defines', that -# substitutes the proper values into config.h.in to produce config.h. -rm -f conftest.defines conftest.tail -# First, append a space to every undef/define line, to ease matching. -echo 's/$/ /' >conftest.defines -# Then, protect against being on the right side of a sed subst, or in -# an unquoted here document, in config.status. If some macros were -# called several times there might be several #defines for the same -# symbol, which is useless. But do not sort them, since the last -# AC_DEFINE must be honored. -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where -# NAME is the cpp macro being defined, VALUE is the value it is being given. -# PARAMS is the parameter list in the macro definition--in most cases, it's -# just an empty string. -ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' -ac_dB='\\)[ (].*,\\1define\\2' -ac_dC=' ' -ac_dD=' ,' - -uniq confdefs.h | - sed -n ' - t rset - :rset - s/^[ ]*#[ ]*define[ ][ ]*// - t ok - d - :ok - s/[\\&,]/\\&/g - s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p - s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p - ' >>conftest.defines - -# Remove the space that was appended to ease matching. -# Then replace #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -# (The regexp can be short, since the line contains either #define or #undef.) -echo 's/ $// -s,^[ #]*u.*,/* & */,' >>conftest.defines - -# Break up conftest.defines: -ac_max_sed_lines=50 - -# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" -# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" -# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" -# et cetera. -ac_in='$ac_file_inputs' -ac_out='"$tmp/out1"' -ac_nxt='"$tmp/out2"' - -while : -do - # Write a here document: - cat >>$CONFIG_STATUS <<_ACEOF - # First, check the format of the line: - cat >"\$tmp/defines.sed" <<\\CEOF -/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def -/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def -b -:def -_ACEOF - sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS - echo 'CEOF - sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS - ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in - sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail - grep . conftest.tail >/dev/null || break - rm -f conftest.defines - mv conftest.tail conftest.defines -done -rm -f conftest.defines conftest.tail - -echo "ac_result=$ac_in" >>$CONFIG_STATUS -cat >>$CONFIG_STATUS <<\_ACEOF + # + # CONFIG_HEADER + # if test x"$ac_file" != x-; then - echo "/* $configure_input */" >"$tmp/config.h" - cat "$ac_result" >>"$tmp/config.h" - if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || as_fn_error "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} else - rm -f $ac_file - mv "$tmp/config.h" $ac_file + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ + || as_fn_error "could not create $ac_file" "$LINENO" 5 fi else - echo "/* $configure_input */" - cat "$ac_result" + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error "could not create -" "$LINENO" 5 fi - rm -f "$tmp/out12" -# Compute $ac_file's index in $config_headers. -_am_arg=$ac_file +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in @@ -15837,7 +7519,7 @@ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -echo X"$_am_arg" | +$as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -15857,662 +7539,40 @@ s/.*/./; q'`/stamp-h$_am_stamp_count ;; - :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 -echo "$as_me: executing $ac_file commands" >&6;} + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that does not interpret backslashes. -ECHO=$lt_ECHO - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - case $xsi_shell in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac -} - -# func_basename file -func_basename () -{ - func_basename_result="${1##*/}" -} - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}" -} - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -func_stripname () -{ - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"} -} - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=${1%%=*} - func_opt_split_arg=${1#*=} -} - -# func_lo2o object -func_lo2o () -{ - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=${1%.*}.lo -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=$(( $* )) -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=${#1} -} - -_LT_EOF - ;; - *) # Bourne compatible functions. - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; - esac -} - -# sed scripts: -my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' -my_sed_long_arg='1s/^-[^=]*=//' - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` - func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -} - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=`expr "$@"` -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` -} - -_LT_EOF -esac - -case $lt_shell_append in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$1+=\$2" -} -_LT_EOF - ;; - *) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$1=\$$1\$2" -} - -_LT_EOF - ;; + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; esac - - - sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || -echo X"$mf" | +$as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -16530,68 +7590,33 @@ q } s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir=$dirpart/$fdir - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | +$as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -16609,27 +7634,25 @@ q } s/.*/./; q'` - test -d "$as_dir" && break + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" done -done +} ;; esac done # for ac_tag -{ (exit 0); exit 0; } +as_fn_exit 0 _ACEOF -chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save +test $ac_write_fail = 0 || + as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 + # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. @@ -16649,6 +7672,10 @@ exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } + $ac_cs_success || as_fn_exit $? +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi diff -Nru tint2-0.7.1/configure.ac tint2-0.9/configure.ac --- tint2-0.7.1/configure.ac 2009-07-22 17:46:07.000000000 +0100 +++ tint2-0.9/configure.ac 2010-01-15 20:51:10.000000000 +0000 @@ -1,17 +1,49 @@ # -*- Autoconf -*- # Process this file with autoconf to produce a configure script. -AC_INIT([tint2], [0.7.1], [http://code.google.com/p/tint2/issues]) +AC_PREREQ([2.61]) +AC_INIT([tint2], [0.9rc1], [http://code.google.com/p/tint2/issues]) -LT_INIT AM_INIT_AUTOMAKE AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_SRCDIR([src/tint.c]) AC_CONFIG_HEADERS([config.h]) +# tint2 +AC_ARG_ENABLE([battery], + [AS_HELP_STRING([--disable-battery], [Disable battery status plugin])], + [case "${enableval}" in + yes) battery=true ;; + no) battery=false ;; + *) AC_MSG_ERROR([bad value ${enableval} for --disable-battery]) ;; + esac], [battery=true]) +AM_CONDITIONAL([ENABLE_BATTERY], [test x$battery = xtrue]) +# + +AC_ARG_ENABLE([examples], + [AS_HELP_STRING([--enable-examples], [Install additional tin2rc examples])], + [case "${enableval}" in + yes) examples=true ;; + no) examples=false ;; + *) AC_MSG_ERROR([bad value ${enableval} for --enable-examples]) ;; + esac],[examples=false]) +AM_CONDITIONAL([INSTALL_EXAMPLES], [test x$examples = xtrue]) + +# tint2conf +AC_ARG_ENABLE([tint2conf], + [AS_HELP_STRING([--enable-tint2conf], [Enable tint2conf build, a GTK+2 theme switcher for tint2])], + [case "${enableval}" in + yes) tint2conf=true ;; + no) tint2conf=false ;; + *) AC_MSG_ERROR([bad value ${enableval} for --enable-tint2conf]) ;; + esac],[tint2conf=false]) +AM_CONDITIONAL([ENABLE_TINT2CONF], [test x$tint2conf = xtrue]) +# + # Checks for programs. AC_LANG([C]) AC_PROG_CC +PKG_PROG_PKG_CONFIG # Checks for libraries. PKG_CHECK_MODULES([PANGOCAIRO], [pangocairo]) @@ -34,7 +66,7 @@ AC_SUBST(GOBJECT2_CFLAGS) AC_SUBST(GOBJECT2_LIBS) -PKG_CHECK_MODULES([X11], [x11]) +PKG_CHECK_MODULES([X11], [x11 xdamage xcomposite]) AC_SUBST(X11_CFLAGS) AC_SUBST(X11_LIBS) @@ -54,9 +86,10 @@ # Checks for header files. AC_PATH_X -AC_CHECK_HEADERS([fcntl.h stdlib.h string.h sys/time.h unistd.h]) +AC_CHECK_HEADERS([fcntl.h locale.h stdlib.h string.h sys/time.h unistd.h]) # Checks for typedefs, structures, and compiler characteristics. +AC_HEADER_STDBOOL AC_TYPE_INT16_T AC_TYPE_INT64_T AC_TYPE_INT8_T @@ -65,30 +98,65 @@ # Checks for library functions. AC_FUNC_FORK AC_FUNC_MALLOC -AC_CHECK_FUNCS([gettimeofday memset select setlocale strcasecmp strchr strdup]) +AC_FUNC_REALLOC +AC_CHECK_FUNCS([alarm gettimeofday memset select setlocale strcasecmp strchr strdup]) -AC_ARG_ENABLE([battery], - [AS_HELP_STRING([--disable-battery], [Disable battery status plugin])], - [case "${enableval}" in - yes) battery=true ;; - no) battery=false ;; - *) AC_MSG_ERROR([bad value ${enableval} for --disable-battery]) ;; - esac], [battery=true]) -AM_CONDITIONAL([ENABLE_BATTERY], [test x$battery = xtrue]) +# tint2conf (experimental) +if test "x$tint2conf" = xtrue; +then + # We want just link against stuff we really need so thats why I don't use PKG_CHECK_MODULES. + # gtk/glib is a bit horrible because we have to add -I directives for various features (like cairo, pango etc.) + # even if we don't need them. + # Sorry if that might be confusing %-) + + AC_CHECK_FUNCS([strndup strrchr strstr]) + # Save LIBS value and clear the variable, AC_CHECK_LIB will append all libs to LIBS on success. + LIBS_SAVED=$LIBS + LIBS= + + AC_CHECK_LIB([pthread], [pthread_create], [], + [AC_MSG_ERROR([libpthread is missing, usually provided by glibc])]) + AC_CHECK_LIB([glib-2.0], [g_free], [], + [AC_MSG_ERROR([glib-2.x is missing])]) + AC_CHECK_LIB([gobject-2.0], [g_signal_connect_data], [], + [AC_MSG_ERROR([libgobject-2.0 is missing, usually provided by glib-2.x])]) + AC_CHECK_LIB([gtk-x11-2.0], [gtk_main], [], + [AC_MSG_ERROR([gtk+-2.x is missing or not built with X support])]) + AC_CHECK_LIB([gthread-2.0], [g_thread_init], [], + [AC_MSG_ERROR([libgthread-2.0 is missing, usually provided by glib-2.x])]) + + TINT2CONF_LIBS="${LIBS} ${PTHREAD_LIB} ${GLIB2_LIB} ${GOBJECT2_LIB} ${IMLIB2_LIBS}" + LIBS=$LIBS_SAVED + + TINT2CONF_CFLAGS="$(${PKG_CONFIG} --cflags gtk+-x11-2.0 glib-2.0 gobject-2.0 gthread-2.0) ${IMLIB2_CFLAGS}" + AC_SUBST(TINT2CONF_CFLAGS) + AC_SUBST(TINT2CONF_LIBS) + + # Python stuff + AC_PATH_PROG([__PYTHON], [python]) + if test -z "${__PYTHON}"; + then + AC_MSG_ERROR([tint2conf requires python to be installed]) + fi + + PKG_CHECK_EXISTS([pygtk-2.0],,[AC_MSG_ERROR([tint2conf requires >=pygtk-2.0])]) +fi +# + +# +AM_CFLAGS="-Wall" +AM_LDFLAGS="-Wl,--as-needed" +AC_SUBST(AM_CFLAGS) +AC_SUBST(AM_LDFLAGS) -AC_ARG_ENABLE([examples], - [AS_HELP_STRING([--enable-examples], [Install additional tin2rc examples])], - [case "${enableval}" in - yes) examples=true ;; - no) examples=false ;; - *) AC_MSG_ERROR([bad value ${enableval} for --enable-examples]) ;; - esac],[examples=false]) -AM_CONDITIONAL([INSTALL_EXAMPLES], [test x$examples = xtrue]) +DISTCLEANFILES="Makefile.in" +AC_SUBST(DISTCLEANFILES) -AC_CONFIG_FILES([ - Makefile +AC_CONFIG_FILES([Makefile doc/Makefile + sample/Makefile src/Makefile - ]) + src/tint2conf/Makefile + src/version.h]) AC_OUTPUT diff -Nru tint2-0.7.1/debian/changelog tint2-0.9/debian/changelog --- tint2-0.7.1/debian/changelog 2010-08-07 09:12:15.000000000 +0100 +++ tint2-0.9/debian/changelog 2010-08-07 08:45:50.000000000 +0100 @@ -1,3 +1,37 @@ +tint2 (0.9-0yavdr1) lucid; urgency=low + + * reb. lucid-yavdr repo + + -- Holger Schvestka Sat, 07 Aug 2010 09:45:17 +0200 + +tint2 (0.9-2) unstable; urgency=low + + * debian/patches/update-systray-clock-every-second.diff: Cherry-pick + patch from upstream to keep systray clock in sync with system time. + (Closes: #572227) + + -- Daniel Moerner Wed, 03 Mar 2010 23:40:02 -0800 + +tint2 (0.9-1) unstable; urgency=low + + * New Upstream Version + * debian/watch: Upstream uses both _beta and -rc1 for version strings, + update uversionmangle to handle both. + * debian/control: + - Bump to Version 3.8.4, no changes. + - Add libxdamage-dev and libxcomposite-dev to Build-Depends. + + -- Daniel Moerner Wed, 24 Feb 2010 10:21:01 -0800 + +tint2 (0.8-1) unstable; urgency=low + + * New Upstream Version + * debian/examples: Upstream has renamed the sample tint2rc files. + * debian/source: Switch to dpkg-source 3.0 (quilt) format. + * debian/copyright: Update with new upstream authors. + + -- Daniel Moerner Tue, 12 Jan 2010 11:48:49 -0800 + tint2 (0.7.1-1) unstable; urgency=low * New Upstream Version diff -Nru tint2-0.7.1/debian/control tint2-0.9/debian/control --- tint2-0.7.1/debian/control 2010-08-07 09:12:15.000000000 +0100 +++ tint2-0.9/debian/control 2010-03-04 07:47:10.000000000 +0000 @@ -2,8 +2,8 @@ Section: x11 Priority: optional Maintainer: Daniel Moerner -Build-Depends: debhelper (>= 7.0.50), libcairo2-dev, libpango1.0-dev, libglib2.0-dev, libimlib2-dev, libxinerama-dev, libxrandr-dev -Standards-Version: 3.8.3 +Build-Depends: debhelper (>= 7.0.50), libcairo2-dev, libpango1.0-dev, libglib2.0-dev, libimlib2-dev, libxinerama-dev, libxrandr-dev, libxcomposite-dev, libxdamage-dev +Standards-Version: 3.8.4 Vcs-Git: git://git.debian.org/git/collab-maint/tint2.git Vcs-Browser: http://git.debian.org/?p=collab-maint/tint2.git Homepage: http://code.google.com/p/tint2/ diff -Nru tint2-0.7.1/debian/copyright tint2-0.9/debian/copyright --- tint2-0.7.1/debian/copyright 2010-08-07 09:12:15.000000000 +0100 +++ tint2-0.9/debian/copyright 2010-03-04 07:47:10.000000000 +0000 @@ -7,11 +7,13 @@ Pål Staurland (original ttm code) Thierry Lorthiois + Andreas Fink Copyright: Copyright 2007-2008 Pål Staurland (original ttm code) Copyright 2008-2009 Thierry Lorthiois + Copyright 2009 Andreas Fink Copyright 2009 Sebastian Reichel (src/battery/*) License: diff -Nru tint2-0.7.1/debian/examples tint2-0.9/debian/examples --- tint2-0.7.1/debian/examples 2010-08-07 09:12:15.000000000 +0100 +++ tint2-0.9/debian/examples 2010-03-04 07:47:10.000000000 +0000 @@ -1,6 +1 @@ -tintrc01 -tintrc02 -tintrc03 -tintrc04 -tintrc05 -tintrc06 +sample/*.tint2rc diff -Nru tint2-0.7.1/debian/patches/series tint2-0.9/debian/patches/series --- tint2-0.7.1/debian/patches/series 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/debian/patches/series 2010-03-04 07:47:10.000000000 +0000 @@ -0,0 +1 @@ +update-systray-clock-every-second.diff diff -Nru tint2-0.7.1/debian/patches/update-systray-clock-every-second.diff tint2-0.9/debian/patches/update-systray-clock-every-second.diff --- tint2-0.7.1/debian/patches/update-systray-clock-every-second.diff 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/debian/patches/update-systray-clock-every-second.diff 2010-03-04 07:47:10.000000000 +0000 @@ -0,0 +1,51 @@ +From: Thierry Lorthiois +Description: applied patch to synchronize clock by wim.speek@orange.nl +Origin: upstream, http://code.google.com/p/tint2/source/detail?r=392 +Bug: http://code.google.com/p/tint2/issues/detail?id=230 +Bug-Debian: http://bugs.debian.org/572227 + +diff --git a/src/clock/clock.c b/src/clock/clock.c +index 82964a6..6d4bea9 100644 +--- a/src/clock/clock.c ++++ b/src/clock/clock.c +@@ -53,7 +53,7 @@ int clock_enabled; + static timeout* clock_timeout=0; + + +-void update_clocks(void* arg) ++void update_clocks_sec(void* arg) + { + gettimeofday(&time_clock, 0); + int i; +@@ -64,6 +64,19 @@ void update_clocks(void* arg) + panel_refresh = 1; + } + ++void update_clocks_min(void* arg) ++{ ++ gettimeofday(&time_clock, 0); ++ if (time_clock.tv_sec % 60 == 0) { ++ int i; ++ if (time1_format) { ++ for (i=0 ; i < nb_panel ; i++) ++ panel1[i].clock.area.resize = 1; ++ } ++ panel_refresh = 1; ++ } ++} ++ + struct tm* clock_gettime_for_tz(const char* timezone) { + if (timezone) { + const char* old_tz = getenv("TZ"); +@@ -87,9 +100,9 @@ void init_clock() + { + if(time1_format && clock_timeout==0) { + if (strchr(time1_format, 'S') || strchr(time1_format, 'T') || strchr(time1_format, 'r')) +- clock_timeout = add_timeout(10, 1000, update_clocks, 0); ++ clock_timeout = add_timeout(10, 1000, update_clocks_sec, 0); + else +- clock_timeout = add_timeout(10, 60000, update_clocks, 0); ++ clock_timeout = add_timeout(10, 1000, update_clocks_min, 0); + } + } + diff -Nru tint2-0.7.1/debian/source/format tint2-0.9/debian/source/format --- tint2-0.7.1/debian/source/format 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/debian/source/format 2010-08-07 09:12:16.000000000 +0100 @@ -0,0 +1 @@ +3.0 (quilt) diff -Nru tint2-0.7.1/debian/watch tint2-0.9/debian/watch --- tint2-0.7.1/debian/watch 2010-08-07 09:12:15.000000000 +0100 +++ tint2-0.9/debian/watch 2010-03-04 07:47:10.000000000 +0000 @@ -1,5 +1,5 @@ version=3 -opts="uversionmangle=s/_.*//" \ +opts="uversionmangle=s/_/~/; s/-/~/" \ http://code.google.com/p/tint2/downloads/list \ http://tint2.googlecode.com/files/tint2-(.*)\.tar\.gz Binary files /tmp/R71h6Z2kSj/tint2-0.7.1/default_icon.png and /tmp/gVNhycitLV/tint2-0.9/default_icon.png differ diff -Nru tint2-0.7.1/depcomp tint2-0.9/depcomp --- tint2-0.7.1/depcomp 2008-05-03 03:38:24.000000000 +0100 +++ tint2-0.9/depcomp 2010-01-28 11:20:04.000000000 +0000 @@ -1,10 +1,10 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2007-03-29.01 +scriptversion=2009-04-28.21; # UTC -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software -# Foundation, Inc. +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free +# Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -17,9 +17,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -87,6 +85,15 @@ depmode=dashmstdout fi +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u="sed s,\\\\\\\\,/,g" + depmode=msvisualcpp +fi + case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what @@ -192,14 +199,14 @@ ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' -' ' ' >> $depfile - echo >> $depfile +' ' ' >> "$depfile" + echo >> "$depfile" # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile + >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -328,7 +335,12 @@ if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" # Add `dependent.h:' lines. - sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile" + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi @@ -404,7 +416,7 @@ # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift @@ -455,32 +467,39 @@ "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift - cleared=no - for arg in "$@"; do + cleared=no eat=no + for arg + do case $cleared in no) set ""; shift cleared=yes ;; esac + if test $eat = yes; then + eat=no + continue + fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done - obj_suffix="`echo $object | sed 's/^.*\././'`" + obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" @@ -500,7 +519,7 @@ # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift @@ -538,13 +557,27 @@ msvisualcpp) # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. + # always write the preprocessed file to stdout. "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + IFS=" " for arg do case "$arg" in + -o) + shift + ;; + $object) + shift + ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift @@ -557,16 +590,23 @@ ;; esac done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + none) exec "$@" ;; @@ -585,5 +625,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -Nru tint2-0.7.1/doc/Makefile.am tint2-0.9/doc/Makefile.am --- tint2-0.7.1/doc/Makefile.am 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/doc/Makefile.am 2009-07-26 16:45:15.000000000 +0100 @@ -1,4 +1,3 @@ man1_MANS = $(PACKAGE_NAME).1 EXTRA_DIST = $(man1_MANS) -DISTCLEANFILES = Makefile.in diff -Nru tint2-0.7.1/doc/Makefile.in tint2-0.9/doc/Makefile.in --- tint2-0.7.1/doc/Makefile.in 2009-07-22 17:47:17.000000000 +0100 +++ tint2-0.9/doc/Makefile.in 2010-01-28 11:16:45.000000000 +0000 @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -15,8 +16,9 @@ @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -29,22 +31,39 @@ NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ subdir = doc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man1dir = $(mandir)/man1 am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff @@ -52,7 +71,8 @@ DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ -AR = @AR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_LDFLAGS = @AM_LDFLAGS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -67,14 +87,12 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ +DISTCLEANFILES = @DISTCLEANFILES@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -FGREP = @FGREP@ GLIB2_CFLAGS = @GLIB2_CFLAGS@ GLIB2_LIBS = @GLIB2_LIBS@ GOBJECT2_CFLAGS = @GOBJECT2_CFLAGS@ @@ -87,26 +105,19 @@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGOCAIRO_CFLAGS = @PANGOCAIRO_CFLAGS@ PANGOCAIRO_LIBS = @PANGOCAIRO_LIBS@ @@ -114,45 +125,37 @@ PANGO_LIBS = @PANGO_LIBS@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ -RANLIB = @RANLIB@ -SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ +TINT2CONF_CFLAGS = @TINT2CONF_CFLAGS@ +TINT2CONF_LIBS = @TINT2CONF_LIBS@ VERSION = @VERSION@ X11_CFLAGS = @X11_CFLAGS@ X11_LIBS = @X11_LIBS@ XINERAMA_CFLAGS = @XINERAMA_CFLAGS@ XINERAMA_LIBS = @XINERAMA_LIBS@ XMKMF = @XMKMF@ +__PYTHON = @__PYTHON@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ -build = @build@ build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ -host = @host@ host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ @@ -161,7 +164,6 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ @@ -174,11 +176,11 @@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ man1_MANS = $(PACKAGE_NAME).1 EXTRA_DIST = $(man1_MANS) -DISTCLEANFILES = Makefile.in all: all-am .SUFFIXES: @@ -186,14 +188,14 @@ @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu doc/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -211,57 +213,41 @@ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-man1: $(man1_MANS) $(man_MANS) +$(am__aclocal_m4_deps): +install-man1: $(man1_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ + @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \ + { for i in $$list; do echo "$$i"; done; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + uninstall-man1: @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ - done + @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + test -z "$$files" || { \ + echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } tags: TAGS TAGS: @@ -270,6 +256,19 @@ distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically \`make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -285,13 +284,17 @@ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -322,6 +325,7 @@ distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @@ -329,7 +333,7 @@ @echo "it deletes files that may require special tools to rebuild." clean: clean-am -clean-am: clean-generic clean-libtool mostlyclean-am +clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f Makefile @@ -341,6 +345,8 @@ html: html-am +html-am: + info: info-am info-am: @@ -349,18 +355,28 @@ install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man1 install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -369,7 +385,7 @@ mostlyclean: mostlyclean-am -mostlyclean-am: mostlyclean-generic mostlyclean-libtool +mostlyclean-am: mostlyclean-generic pdf: pdf-am @@ -385,17 +401,17 @@ .MAKE: install-am install-strip -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-man1 \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-man uninstall-man1 +.PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-man1 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \ + uninstall-am uninstall-man uninstall-man1 + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -Nru tint2-0.7.1/INSTALL tint2-0.9/INSTALL --- tint2-0.7.1/INSTALL 2008-05-03 03:38:24.000000000 +0100 +++ tint2-0.9/INSTALL 2010-01-28 11:20:04.000000000 +0000 @@ -2,18 +2,24 @@ ************************* Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007 Free Software Foundation, Inc. +2006, 2007, 2008, 2009 Free Software Foundation, Inc. -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== -Briefly, the shell commands `./configure; make; make install' should + Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,15 +83,22 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here @@ -88,25 +111,41 @@ Compiling For Multiple Architectures ==================================== -You can compile the package for more than one kind of computer at the + You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + Installation Names ================== -By default, `make install' installs the package's commands under + By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -117,16 +156,47 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to + Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -138,14 +208,53 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -153,7 +262,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -171,9 +281,9 @@ Sharing Defaults ================ -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. @@ -182,7 +292,7 @@ Defining Variables ================== -Variables not defined in a site shell script can be set in the + Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set @@ -201,11 +311,19 @@ `configure' Invocation ====================== -`configure' recognizes the following options to control how it operates. + `configure' recognizes the following options to control how it +operates. `--help' `-h' - Print a summary of the options to `configure', and exit. + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. `--version' `-V' @@ -232,6 +350,16 @@ Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. diff -Nru tint2-0.7.1/install-sh tint2-0.9/install-sh --- tint2-0.7.1/install-sh 2008-05-03 03:38:24.000000000 +0100 +++ tint2-0.9/install-sh 2010-01-28 11:20:04.000000000 +0000 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2006-12-25.00 +scriptversion=2009-04-28.21; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -515,5 +515,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -Nru tint2-0.7.1/ltmain.sh tint2-0.9/ltmain.sh --- tint2-0.7.1/ltmain.sh 2008-09-01 18:32:11.000000000 +0100 +++ tint2-0.9/ltmain.sh 1970-01-01 01:00:00.000000000 +0100 @@ -1,7880 +0,0 @@ -# Generated from ltmain.m4sh. - -# ltmain.sh (GNU libtool) 2.2.4 -# Written by Gordon Matzigkeit , 1996 - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, -# or obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# Usage: $progname [OPTION]... [MODE-ARG]... -# -# Provide generalized library-building support services. -# -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print informational messages (default) -# --version print version information -# -h, --help print short or long help message -# -# MODE must be one of the following: -# -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory -# -# MODE-ARGS vary depending on the MODE. -# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -# -# When reporting a bug, please describe a test case to reproduce it and -# include the following information: -# -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.2.4 Debian-2.2.4-0ubuntu4 -# automake: $automake_version -# autoconf: $autoconf_version -# -# Report bugs to . - -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION="2.2.4 Debian-2.2.4-0ubuntu4" -TIMESTAMP="" -package_revision=1.2976 - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# NLS nuisances: We save the old values to restore during execute mode. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -lt_user_locale= -lt_safe_locale= -for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -do - eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - $lt_var=C - export $lt_var - lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" - fi" -done - -$lt_unset CDPATH - - - - - -: ${CP="cp -f"} -: ${ECHO="echo"} -: ${EGREP="/bin/grep -E"} -: ${FGREP="/bin/grep -F"} -: ${GREP="/bin/grep"} -: ${LN_S="ln -s"} -: ${MAKE="make"} -: ${MKDIR="mkdir"} -: ${MV="mv -f"} -: ${RM="rm -f"} -: ${SED="/bin/sed"} -: ${SHELL="${CONFIG_SHELL-/bin/sh}"} -: ${Xsed="$SED -e 1s/^X//"} - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -exit_status=$EXIT_SUCCESS - -# Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" - -dirname="s,/[^/]*$,," -basename="s,^.*/,," - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - -# Generated shell functions inserted here. - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" - -# The name of this program: -# In the unlikely event $progname began with a '-', it would play havoc with -# func_echo (imagine progname=-n), so we prepend ./ in that case: -func_dirname_and_basename "$progpath" -progname=$func_basename_result -case $progname in - -*) progname=./$progname ;; -esac - -# Make sure we have an absolute path for reexecution: -case $progpath in - [\\/]*|[A-Za-z]:\\*) ;; - *[\\/]*) - progdir=$func_dirname_result - progdir=`cd "$progdir" && pwd` - progpath="$progdir/$progname" - ;; - *) - save_IFS="$IFS" - IFS=: - for progdir in $PATH; do - IFS="$save_IFS" - test -x "$progdir/$progname" && break - done - IFS="$save_IFS" - test -n "$progdir" || progdir=`pwd` - progpath="$progdir/$progname" - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Re-`\' parameter expansions in output of double_quote_subst that were -# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -# in input to double_quote_subst, that '$' was protected from expansion. -# Since each input `\' is now two `\'s, look for any number of runs of -# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -bs='\\' -bs2='\\\\' -bs4='\\\\\\\\' -dollar='\$' -sed_double_backslash="\ - s/$bs4/&\\ -/g - s/^$bs2$dollar/$bs&/ - s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g - s/\n//g" - -# Standard options: -opt_dry_run=false -opt_help=false -opt_quiet=false -opt_verbose=false -opt_warning=: - -# func_echo arg... -# Echo program name prefixed message, along with the current mode -# name if it has been set yet. -func_echo () -{ - $ECHO "$progname${mode+: }$mode: $*" -} - -# func_verbose arg... -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $opt_verbose && func_echo ${1+"$@"} - - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : -} - -# func_error arg... -# Echo program name prefixed message to standard error. -func_error () -{ - $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 -} - -# func_warning arg... -# Echo program name prefixed warning message to standard error. -func_warning () -{ - $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 - - # bash bug again: - : -} - -# func_fatal_error arg... -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - func_error ${1+"$@"} - exit $EXIT_FAILURE -} - -# func_fatal_help arg... -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - func_error ${1+"$@"} - func_fatal_error "$help" -} -help="Try \`$progname --help' for more information." ## default - - -# func_grep expression filename -# Check whether EXPRESSION matches any line of FILENAME, without output. -func_grep () -{ - $GREP "$1" "$2" >/dev/null 2>&1 -} - - -# func_mkdir_p directory-path -# Make sure the entire path to DIRECTORY-PATH is available. -func_mkdir_p () -{ - my_directory_path="$1" - my_dir_list= - - if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then - - # Protect directory names starting with `-' - case $my_directory_path in - -*) my_directory_path="./$my_directory_path" ;; - esac - - # While some portion of DIR does not yet exist... - while test ! -d "$my_directory_path"; do - # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. - my_dir_list="$my_directory_path:$my_dir_list" - - # If the last portion added has no slash in it, the list is done - case $my_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` - done - my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` - - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do - IFS="$save_mkdir_p_IFS" - # mkdir can fail with a `File exist' error if two processes - # try to create one of the directories concurrently. Don't - # stop in that case! - $MKDIR "$my_dir" 2>/dev/null || : - done - IFS="$save_mkdir_p_IFS" - - # Bail out if we (or some other process) failed to create a directory. - test -d "$my_directory_path" || \ - func_fatal_error "Failed to create \`$1'" - fi -} - - -# func_mktempdir [string] -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. -func_mktempdir () -{ - my_template="${TMPDIR-/tmp}/${1-$progname}" - - if test "$opt_dry_run" = ":"; then - # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" - else - - # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` - - if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" - - save_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$my_tmpdir" - umask $save_mktempdir_umask - fi - - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || \ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" - fi - - $ECHO "X$my_tmpdir" | $Xsed -} - - -# func_quote_for_eval arg -# Aesthetically quote ARG to be evaled later. -# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -# is double-quoted, suitable for a subsequent eval, whereas -# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -# which are still active within double quotes backslashified. -func_quote_for_eval () -{ - case $1 in - *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac - - case $func_quote_for_eval_unquoted_result in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and and variable - # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" - ;; - *) - func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" - esac -} - - -# func_quote_for_expand arg -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () -{ - case $1 in - *[\\\`\"]*) - my_arg=`$ECHO "X$1" | $Xsed \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; - *) - my_arg="$1" ;; - esac - - case $my_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - my_arg="\"$my_arg\"" - ;; - esac - - func_quote_for_expand_result="$my_arg" -} - - -# func_show_eval cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$my_cmd" - my_status=$? - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - - -# func_show_eval_locale cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$lt_user_locale - $my_cmd" - my_status=$? - eval "$lt_safe_locale" - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - - - - - -# func_version -# Echo version message to standard output and exit. -func_version () -{ - $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ - p - }' < "$progpath" - exit $? -} - -# func_usage -# Echo short help message to standard output and exit. -func_usage () -{ - $SED -n '/^# Usage:/,/# -h/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" - $ECHO - $ECHO "run \`$progname --help | more' for full usage" - exit $? -} - -# func_help -# Echo long help message to standard output and exit. -func_help () -{ - $SED -n '/^# Usage:/,/# Report bugs to/ { - s/^# // - s/^# *$// - s*\$progname*'$progname'* - s*\$host*'"$host"'* - s*\$SHELL*'"$SHELL"'* - s*\$LTCC*'"$LTCC"'* - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ - p - }' < "$progpath" - exit $? -} - -# func_missing_arg argname -# Echo program name prefixed message to standard error and set global -# exit_cmd. -func_missing_arg () -{ - func_error "missing argument for $1" - exit_cmd=exit -} - -exit_cmd=: - - - - - -# Check that we have a working $ECHO. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell, and then maybe $ECHO will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null 2>&1; then - taglist="$taglist $tagname" - - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac -} - -# Parse options once, thoroughly. This comes as soon as possible in -# the script to make things like `libtool --version' happen quickly. -{ - - # Shorthand for --mode=foo, only valid as the first argument - case $1 in - clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; - compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; - execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; - finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; - install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; - link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; - uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; - esac - - # Parse non-mode specific arguments: - while test "$#" -gt 0; do - opt="$1" - shift - - case $opt in - --config) func_config ;; - - --debug) preserve_args="$preserve_args $opt" - func_echo "enabling shell trace mode" - opt_debug='set -x' - $opt_debug - ;; - - -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break - execute_dlfiles="$execute_dlfiles $1" - shift - ;; - - --dry-run | -n) opt_dry_run=: ;; - --features) func_features ;; - --finish) mode="finish" ;; - - --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break - case $1 in - # Valid mode arguments: - clean) ;; - compile) ;; - execute) ;; - finish) ;; - install) ;; - link) ;; - relink) ;; - uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; - esac - - mode="$1" - shift - ;; - - --preserve-dup-deps) - opt_duplicate_deps=: ;; - - --quiet|--silent) preserve_args="$preserve_args $opt" - opt_silent=: - ;; - - --verbose| -v) preserve_args="$preserve_args $opt" - opt_silent=false - ;; - - --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break - preserve_args="$preserve_args $opt $1" - func_enable_tag "$1" # tagname is set here - shift - ;; - - # Separate optargs to long options: - -dlopen=*|--mode=*|--tag=*) - func_opt_split "$opt" - set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} - shift - ;; - - -\?|-h) func_usage ;; - --help) opt_help=: ;; - --version) func_version ;; - - -*) func_fatal_help "unrecognized option \`$opt'" ;; - - *) nonopt="$opt" - break - ;; - esac - done - - - case $host in - *cygwin* | *mingw* | *pw32*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_duplicate_deps - ;; - esac - - # Having warned about all mis-specified options, bail out if - # anything was wrong. - $exit_cmd $EXIT_FAILURE -} - -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -## ----------- ## -## Main. ## -## ----------- ## - -$opt_help || { - # Sanity checks first: - func_check_version_match - - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" - fi - - test -z "$mode" && func_fatal_error "error: you must specify a MODE." - - - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$mode' for more information." -} - - -# func_lalib_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_lalib_p () -{ - $SED -e 4q "$1" 2>/dev/null \ - | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -} - -# func_lalib_unsafe_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function implements the same check as func_lalib_p without -# resorting to external programs. To this end, it redirects stdin and -# closes it afterwards, without saving the original file descriptor. -# As a safety measure, use it only where a negative result would be -# fatal anyway. Works if `file' does not exist. -func_lalib_unsafe_p () -{ - lalib_p=no - if test -r "$1" && exec 5<&0 <"$1"; then - for lalib_p_l in 1 2 3 4 - do - read lalib_p_line - case "$lalib_p_line" in - \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; - esac - done - exec 0<&5 5<&- - fi - test "$lalib_p" = yes -} - -# func_ltwrapper_script_p file -# True iff FILE is a libtool wrapper script -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_script_p () -{ - func_lalib_p "$1" -} - -# func_ltwrapper_executable_p file -# True iff FILE is a libtool wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_executable_p () -{ - func_ltwrapper_exec_suffix= - case $1 in - *.exe) ;; - *) func_ltwrapper_exec_suffix=.exe ;; - esac - $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -} - -# func_ltwrapper_scriptname file -# Assumes file is an ltwrapper_executable -# uses $file to determine the appropriate filename for a -# temporary ltwrapper_script. -func_ltwrapper_scriptname () -{ - func_ltwrapper_scriptname_result="" - if func_ltwrapper_executable_p "$1"; then - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" - fi -} - -# func_ltwrapper_p file -# True iff FILE is a libtool wrapper script or wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_p () -{ - func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -} - - -# func_execute_cmds commands fail_cmd -# Execute tilde-delimited COMMANDS. -# If FAIL_CMD is given, eval that upon failure. -# FAIL_CMD may read-access the current command in variable CMD! -func_execute_cmds () -{ - $opt_debug - save_ifs=$IFS; IFS='~' - for cmd in $1; do - IFS=$save_ifs - eval cmd=\"$cmd\" - func_show_eval "$cmd" "${2-:}" - done - IFS=$save_ifs -} - - -# func_source file -# Source FILE, adding directory component if necessary. -# Note that it is not necessary on cygwin/mingw to append a dot to -# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -# behavior happens only for exec(3), not for open(2)! Also, sourcing -# `FILE.' does not work on cygwin managed mounts. -func_source () -{ - $opt_debug - case $1 in - */* | *\\*) . "$1" ;; - *) . "./$1" ;; - esac -} - - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - $opt_debug - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" - done - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" - done - case "$@ " in - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with \`--tag'" -# else -# func_verbose "using $tagname tagged configuration" - fi - ;; - esac - fi -} - - - -# func_write_libtool_object output_name pic_name nonpic_name -# Create a libtool object file (analogous to a ".la" file), -# but don't create it if we're doing a dry run. -func_write_libtool_object () -{ - write_libobj=${1} - if test "$build_libtool_libs" = yes; then - write_lobj=\'${2}\' - else - write_lobj=none - fi - - if test "$build_old_libs" = yes; then - write_oldobj=\'${3}\' - else - write_oldobj=none - fi - - $opt_dry_run || { - cat >${write_libobj}T <?"'"'"' &()|`$[]' \ - && func_warning "libobj name \`$libobj' may not contain shell special characters." - func_dirname_and_basename "$obj" "/" "" - objname="$func_basename_result" - xdir="$func_dirname_result" - lobj=${xdir}$objdir/$objname - - test -z "$base_compile" && \ - func_fatal_help "you must specify a compilation command" - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2*) - pic_mode=default - ;; - esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - $ECHO "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - removelist="$removelist $output_obj" - $ECHO "$srcfile" > "$lockfile" - fi - - $opt_dry_run || $RM $removelist - removelist="$removelist $lockfile" - trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result - - # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - if test "$pic_mode" != no; then - command="$base_compile $qsrcfile $pic_flag" - else - # Don't build PIC code - command="$base_compile $qsrcfile" - fi - - func_mkdir_p "$xdir$objdir" - - if test -z "$output_obj"; then - # Place PIC objects in $objdir - command="$command -o $lobj" - fi - - func_show_eval_locale "$command" \ - 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - - if test "$need_locks" = warn && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - func_show_eval '$MV "$output_obj" "$lobj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - - # Allow error messages only from the first compilation. - if test "$suppress_opt" = yes; then - suppress_output=' >/dev/null 2>&1' - fi - fi - - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - if test "$pic_mode" != yes; then - # Don't build PIC code - command="$base_compile $qsrcfile$pie_flag" - else - command="$base_compile $qsrcfile $pic_flag" - fi - if test "$compiler_c_o" = yes; then - command="$command -o $obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" - func_show_eval_locale "$command" \ - '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - - if test "$need_locks" = warn && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - func_show_eval '$MV "$output_obj" "$obj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - fi - - $opt_dry_run || { - func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - removelist=$lockfile - $RM "$lockfile" - fi - } - - exit $EXIT_SUCCESS -} - -$opt_help || { -test "$mode" = compile && func_mode_compile ${1+"$@"} -} - -func_mode_help () -{ - # We need to display help for each of the modes. - case $mode in - "") - # Generic help is extracted from the usage comments - # at the start of this file. - func_help - ;; - - clean) - $ECHO \ -"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - - compile) - $ECHO \ -"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -shared do not build a \`.o' file suitable for static linking - -static only build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - - execute) - $ECHO \ -"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - - finish) - $ECHO \ -"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - - install) - $ECHO \ -"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The following components of INSTALL-COMMAND are treated specially: - - -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - - link) - $ECHO \ -"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -shared only do dynamic linking of libtool libraries - -shrext SUFFIX override the standard shared library file extension - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - - uninstall) - $ECHO \ -"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - - *) - func_fatal_help "invalid operation mode \`$mode'" - ;; - esac - - $ECHO - $ECHO "Try \`$progname --help' for more information about other modes." - - exit $? -} - - # Now that we've collected a possible --mode arg, show help if necessary - $opt_help && func_mode_help - - -# func_mode_execute arg... -func_mode_execute () -{ - $opt_debug - # The first argument is the command name. - cmd="$nonopt" - test -z "$cmd" && \ - func_fatal_help "you must specify a COMMAND" - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - test -f "$file" \ - || func_fatal_help "\`$file' is not a file" - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$lib' is not a valid libtool archive" - - # Read the libtool library. - dlname= - library_names= - func_source "$file" - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && \ - func_warning "\`$file' was not linked with \`-export-dynamic'" - continue - fi - - func_dirname "$file" "" "." - dir="$func_dirname_result" - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - func_dirname "$file" "" "." - dir="$func_dirname_result" - ;; - - *) - func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if func_ltwrapper_script_p "$file"; then - func_source "$file" - # Transform arg to wrapped name. - file="$progdir/$program" - elif func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - func_source "$func_ltwrapper_scriptname_result" - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - func_quote_for_eval "$file" - args="$args $func_quote_for_eval_result" - done - - if test "X$opt_dry_run" = Xfalse; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - else - $lt_unset $lt_var - fi" - done - - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - $ECHO "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS - fi -} - -test "$mode" = execute && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $opt_debug - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -'"$cmd"'"' - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - $opt_silent && exit $EXIT_SUCCESS - - $ECHO "X----------------------------------------------------------------------" | $Xsed - $ECHO "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - $ECHO - $ECHO "If you ever happen to want to link against installed libraries" - $ECHO "in a given directory, LIBDIR, you must either use libtool, and" - $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" - $ECHO "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" - $ECHO " during execution" - fi - if test -n "$runpath_var"; then - $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" - $ECHO " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - $ECHO - - $ECHO "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" - $ECHO "pages." - ;; - *) - $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - $ECHO "X----------------------------------------------------------------------" | $Xsed - exit $EXIT_SUCCESS -} - -test "$mode" = finish && func_mode_finish ${1+"$@"} - - -# func_mode_install arg... -func_mode_install () -{ - $opt_debug - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $ECHO "X$nonopt" | $GREP shtool >/dev/null; then - # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " - arg=$1 - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - func_quote_for_eval "$arg" - install_prog="$install_prog$func_quote_for_eval_result" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) - prev=$arg - ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - func_quote_for_eval "$arg" - install_prog="$install_prog $func_quote_for_eval_result" - done - - test -z "$install_prog" && \ - func_fatal_help "you must specify an install program" - - test -n "$prev" && \ - func_fatal_help "the \`$prev' option requires an argument" - - if test -z "$files"; then - if test -z "$dest"; then - func_fatal_help "no file or destination specified" - else - func_fatal_help "you must specify a destination" - fi - fi - - # Strip any trailing slash from the destination. - func_stripname '' '/' "$dest" - dest=$func_stripname_result - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - func_dirname_and_basename "$dest" "" "." - destdir="$func_dirname_result" - destname="$func_basename_result" - - # Not a directory, so check to see that there is only one file specified. - set dummy $files; shift - test "$#" -gt 1 && \ - func_fatal_help "\`$dest' is not a directory" - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - func_fatal_help "\`$destdir' must be an absolute directory name" - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$file' is not a valid libtool archive" - - library_names= - old_library= - relink_command= - func_source "$file" - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - func_dirname "$file" "/" "" - dir="$func_dirname_result" - dir="$dir$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` - fi - - func_warning "relinking \`$file'" - func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' - fi - - # See the names of the shared library. - set dummy $library_names; shift - if test -n "$1"; then - realname="$1" - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ - 'exit $?' - tstripme="$stripme" - case $host_os in - cygwin* | mingw* | pw32*) - case $realname in - *.dll.a) - tstripme="" - ;; - esac - ;; - esac - if test -n "$tstripme" && test -n "$striplib"; then - func_show_eval "$striplib $destdir/$realname" 'exit $?' - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - test "$linkname" != "$realname" \ - && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - func_execute_cmds "$postinstall_cmds" 'exit $?' - fi - - # Install the pseudo-library for information purposes. - func_basename "$file" - name="$func_basename_result" - instname="$dir/$name"i - func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - func_lo2o "$destfile" - staticdest=$func_lo2o_result - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - func_fatal_help "cannot copy a libtool object to \`$destfile'" - ;; - esac - - # Install the libtool object if requested. - test -n "$destfile" && \ - func_show_eval "$install_prog $file $destfile" 'exit $?' - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - func_lo2o "$file" - staticobj=$func_lo2o_result - func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - func_stripname '' '.exe' "$file" - file=$func_stripname_result - stripped_ext=".exe" - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - wrapper=$func_ltwrapper_scriptname_result - else - func_stripname '' '.exe' "$file" - wrapper=$func_stripname_result - fi - ;; - *) - wrapper=$file - ;; - esac - if func_ltwrapper_script_p "$wrapper"; then - notinst_deplibs= - relink_command= - - func_source "$wrapper" - - # Check the variables that should have been set. - test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script \`$wrapper'" - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - func_source "$lib" - fi - libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "\`$lib' has not been installed in \`$libdir'" - finalize=no - fi - done - - relink_command= - func_source "$wrapper" - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - $opt_dry_run || { - if test "$finalize" = yes; then - tmpdir=`func_mktempdir` - func_basename "$file$stripped_ext" - file="$func_basename_result" - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $opt_silent || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" - } - if eval "$relink_command"; then : - else - func_error "error: relink \`$file' with the above command before installing it" - $opt_dry_run || ${RM}r "$tmpdir" - continue - fi - file="$outputname" - else - func_warning "cannot relink \`$file'" - fi - } - else - # Install the binary that we compiled earlier. - file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - func_stripname '' '.exe' "$destfile" - destfile=$func_stripname_result - ;; - esac - ;; - esac - func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' - $opt_dry_run || if test -n "$outputname"; then - ${RM}r "$tmpdir" - fi - ;; - esac - done - - for file in $staticlibs; do - func_basename "$file" - name="$func_basename_result" - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - func_show_eval "$install_prog \$file \$oldlib" 'exit $?' - - if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $oldlib" 'exit $?' - fi - - # Do each command in the postinstall commands. - func_execute_cmds "$old_postinstall_cmds" 'exit $?' - done - - test -n "$future_libdirs" && \ - func_warning "remember to run \`$progname --finish$future_libdirs'" - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi -} - -test "$mode" = install && func_mode_install ${1+"$@"} - - -# func_generate_dlsyms outputname originator pic_p -# Extract symbols from dlprefiles and create ${outputname}S.o with -# a dlpreopen symbol table. -func_generate_dlsyms () -{ - $opt_debug - my_outputname="$1" - my_originator="$2" - my_pic_p="${3-no}" - my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` - my_dlsyms= - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms="${my_outputname}S.c" - else - func_error "not configured to extract global symbols from dlpreopened files" - fi - fi - - if test -n "$my_dlsyms"; then - case $my_dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${my_outputname}.nm" - - func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - - # Parse the name list into a source file. - func_verbose "creating $output_objdir/$my_dlsyms" - - $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - func_verbose "generating symbol list for \`$output'" - - $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for progfile in $progfiles; do - func_verbose "extracting global C symbols from \`$progfile'" - $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $opt_dry_run || { - eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - if test -n "$export_symbols_regex"; then - $opt_dry_run || { - eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $opt_dry_run || { - $RM $export_symbols - eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - } - else - $opt_dry_run || { - eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - case $host in - *cygwin | *mingw* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - } - fi - fi - - for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from \`$dlprefile'" - func_basename "$dlprefile" - name="$func_basename_result" - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - done - - $opt_dry_run || { - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $MV "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if $GREP -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - $GREP -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' - else - $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" - fi - - $ECHO >> "$output_objdir/$my_dlsyms" "\ - -/* The mapping between symbol names and symbols. */ -typedef struct { - const char *name; - void *address; -} lt_dlsymlist; -" - case $host in - *cygwin* | *mingw* ) - $ECHO >> "$output_objdir/$my_dlsyms" "\ -/* DATA imports from DLLs on WIN32 con't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs. */" - lt_dlsym_const= ;; - *osf5*) - echo >> "$output_objdir/$my_dlsyms" "\ -/* This system does not cope well with relocations in const data */" - lt_dlsym_const= ;; - *) - lt_dlsym_const=const ;; - esac - - $ECHO >> "$output_objdir/$my_dlsyms" "\ -extern $lt_dlsym_const lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[]; -$lt_dlsym_const lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[] = -{\ - { \"$my_originator\", (void *) 0 }," - - case $need_lib_prefix in - no) - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - *) - eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - esac - $ECHO >> "$output_objdir/$my_dlsyms" "\ - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_${my_prefix}_LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - } # !$opt_dry_run - - pic_flag_for_symtable= - case "$compile_command " in - *" -static "*) ;; - *) - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; - *-*-hpux*) - pic_flag_for_symtable=" $pic_flag" ;; - *) - if test "X$my_pic_p" != Xno; then - pic_flag_for_symtable=" $pic_flag" - fi - ;; - esac - ;; - esac - symtab_cflags= - for arg in $LTCFLAGS; do - case $arg in - -pie | -fpie | -fPIE) ;; - *) symtab_cflags="$symtab_cflags $arg" ;; - esac - done - - # Now compile the dynamic symbol file. - func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - - # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' - - # Transform the symbol file into the correct name. - symfileobj="$output_objdir/${my_outputname}S.$objext" - case $host in - *cygwin* | *mingw* ) - if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - else - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - fi - ;; - *) - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - ;; - esac - ;; - *) - func_fatal_error "unknown suffix for \`$my_dlsyms'" - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi -} - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -func_win32_libid () -{ - $opt_debug - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | - $SED -n -e ' - 1,100{ - / I /{ - s,.*,import, - p - q - } - }'` - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $ECHO "$win32_libid_type" -} - - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - $opt_debug - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" - fi -} - - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - $opt_debug - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - func_basename "$my_xlib" - my_xlib="$func_basename_result" - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - func_arith $extracted_serial + 1 - extracted_serial=$func_arith_result - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" - - func_mkdir_p "$my_xdir" - - case $host in - *-darwin*) - func_verbose "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - $opt_dry_run || { - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`basename "$darwin_archive"` - darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` - if test -n "$darwin_arches"; then - darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - $LIPO -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - $RM -rf unfat-$$ - cd "$darwin_orig_dir" - else - cd $darwin_orig_dir - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - } # !$opt_dry_run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - - func_extract_archives_result="$my_oldobjs" -} - - - -# func_emit_wrapper arg -# -# emit a libtool wrapper script on stdout -# don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variable -# set therein. -# -# arg is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is -# the '.lib' directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=no - if test -n "$1" ; then - func_emit_wrapper_arg1=$1 - fi - - $ECHO "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variables: - generated_by_libtool_version='$macro_version' - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$ECHO are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - ECHO=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$ECHO works! - : - else - # Restart under the correct shell, and then maybe \$ECHO will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $ECHO "\ - - # Find the directory that this script lives in. - thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 - if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then - # special case for '.' - if test \"\$thisdir\" = \".\"; then - thisdir=\`pwd\` - fi - # remove .libs from thisdir - case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; - $objdir ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - $ECHO "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $MKDIR \"\$progdir\" - else - $RM \"\$progdir/\$file\" - fi" - - $ECHO "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $ECHO \"\$relink_command_output\" >&2 - $RM \"\$progdir/\$file\" - exit 1 - fi - fi - - $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $RM \"\$progdir/\$program\"; - $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $RM \"\$progdir/\$file\" - fi" - else - $ECHO "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $ECHO "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $ECHO "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $ECHO "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $ECHO "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" -} -# end: func_emit_wrapper - -# func_emit_cwrapperexe_src -# emit the source code for a wrapper executable on stdout -# Must ONLY be called from within func_mode_link because -# it depends on a number of variable set therein. -func_emit_cwrapperexe_src () -{ - cat < -#include -#ifdef _MSC_VER -# include -# include -# include -# define setmode _setmode -#else -# include -# include -# ifdef __CYGWIN__ -# include -# endif -#endif -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef S_IXOTH -# define S_IXOTH 0 -#endif -#ifndef S_IXGRP -# define S_IXGRP 0 -#endif - -#ifdef _MSC_VER -# define S_IXUSR _S_IEXEC -# define stat _stat -# ifndef _INTPTR_T_DEFINED -# define intptr_t int -# endif -#endif - -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -# define HAVE_DOS_BASED_FILE_SYSTEM -# define FOPEN_WB "wb" -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#ifdef __CYGWIN__ -# define FOPEN_WB "wb" -#endif - -#ifndef FOPEN_WB -# define FOPEN_WB "w" -#endif -#ifndef _O_BINARY -# define _O_BINARY 0 -#endif - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -#undef LTWRAPPER_DEBUGPRINTF -#if defined DEBUGWRAPPER -# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args -static void -ltwrapper_debugprintf (const char *fmt, ...) -{ - va_list args; - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); -} -#else -# define LTWRAPPER_DEBUGPRINTF(args) -#endif - -const char *program_name = NULL; - -void *xmalloc (size_t num); -char *xstrdup (const char *string); -const char *base_name (const char *name); -char *find_executable (const char *wrapper); -char *chase_symlinks (const char *pathspec); -int make_executable (const char *path); -int check_executable (const char *path); -char *strendzap (char *str, const char *pat); -void lt_fatal (const char *message, ...); - -static const char *script_text = -EOF - - func_emit_wrapper yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ "/' -e 's/$/\\n"/' - echo ";" - - cat </dev/null || echo $SHELL` - case $lt_newargv0 in - *.exe | *.EXE) ;; - *) lt_newargv0=$lt_newargv0.exe ;; - esac - ;; - * ) lt_newargv0=$SHELL ;; - esac - fi - - cat <= 0) - && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) - return 1; - else - return 0; -} - -int -make_executable (const char *path) -{ - int rval = 0; - struct stat st; - - LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", - path ? (*path ? path : "EMPTY!") : "NULL!")); - if ((!path) || (!*path)) - return 0; - - if (stat (path, &st) >= 0) - { - rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); - } - return rval; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise - Does not chase symlinks, even on platforms that support them. -*/ -char * -find_executable (const char *wrapper) -{ - int has_slash = 0; - const char *p; - const char *p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - int tmp_len; - char *concat_name; - - LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", - wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char *path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char *q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR (*q)) - break; - p_len = q - p; - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen (tmp); - concat_name = - XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = - XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen (tmp); - concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - return NULL; -} - -char * -chase_symlinks (const char *pathspec) -{ -#ifndef S_ISLNK - return xstrdup (pathspec); -#else - char buf[LT_PATHMAX]; - struct stat s; - char *tmp_pathspec = xstrdup (pathspec); - char *p; - int has_symlinks = 0; - while (strlen (tmp_pathspec) && !has_symlinks) - { - LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", - tmp_pathspec)); - if (lstat (tmp_pathspec, &s) == 0) - { - if (S_ISLNK (s.st_mode) != 0) - { - has_symlinks = 1; - break; - } - - /* search backwards for last DIR_SEPARATOR */ - p = tmp_pathspec + strlen (tmp_pathspec) - 1; - while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - p--; - if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - { - /* no more DIR_SEPARATORS left */ - break; - } - *p = '\0'; - } - else - { - char *errstr = strerror (errno); - lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); - } - } - XFREE (tmp_pathspec); - - if (!has_symlinks) - { - return xstrdup (pathspec); - } - - tmp_pathspec = realpath (pathspec, buf); - if (tmp_pathspec == 0) - { - lt_fatal ("Could not follow symlinks for %s", pathspec); - } - return xstrdup (tmp_pathspec); -#endif -} - -char * -strendzap (char *str, const char *pat) -{ - size_t len, patlen; - - assert (str != NULL); - assert (pat != NULL); - - len = strlen (str); - patlen = strlen (pat); - - if (patlen <= len) - { - str += len - patlen; - if (strcmp (str, pat) == 0) - *str = '\0'; - } - return str; -} - -static void -lt_error_core (int exit_status, const char *mode, - const char *message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} -EOF -} -# end: func_emit_cwrapperexe_src - -# func_mode_link arg... -func_mode_link () -{ - $opt_debug - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra - # flag for every libtool invocation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - ;; - *) - allow_undefined=yes - ;; - esac - libtool_args=$nonopt - base_compile="$nonopt $@" - compile_command=$nonopt - finalize_command=$nonopt - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - old_deplibs= - compiler_flags= - linker_flags= - dllsearchpath= - lib_search_path=`pwd` - inst_prefix_dir= - new_inherited_linker_flags= - - avoid_version=no - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - ltlibs= - module=no - no_install=no - objs= - non_pic_objects= - precious_files_regex= - prefer_static_libs=no - preload=no - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - vinfo_number=no - weak_libs= - single_module="${wl}-single_module" - func_infer_tag $base_compile - - # We need to know -static, to get the right output filenames. - for arg - do - case $arg in - -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" - build_old_libs=no - break - ;; - -all-static | -static | -static-libtool-libs) - case $arg in - -all-static) - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - func_warning "complete static linking is impossible in this configuration" - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - -static) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=built - ;; - -static-libtool-libs) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - esac - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg="$1" - shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - func_append compile_command " @OUTPUT@" - func_append finalize_command " @OUTPUT@" - ;; - esac - - case $prev in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - func_append compile_command " @SYMFILE@" - func_append finalize_command " @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - test -f "$arg" \ - || func_fatal_error "symbol file \`$arg' does not exist" - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - framework) - case $host in - *-*-darwin*) - case "$deplibs " in - *" $qarg.ltframework "*) ;; - *) deplibs="$deplibs $qarg.ltframework" # this is fixed later - ;; - esac - ;; - esac - prev= - continue - ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat "$save_arg"` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "\`$arg' is not a valid libtool object" - fi - fi - done - else - func_fatal_error "link input file \`$arg' does not exist" - fi - arg=$save_arg - prev= - continue - ;; - precious_regex) - precious_files_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - shrext) - shrext_cmds="$arg" - prev= - continue - ;; - weak) - weak_libs="$weak_libs $arg" - prev= - continue - ;; - xcclinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" - prev= - func_append compile_command " $wl$qarg" - func_append finalize_command " $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg="$arg" - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - # See comment for -static flag below, for more details. - func_append compile_command " $link_static_flag" - func_append finalize_command " $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - func_fatal_error "\`-allow-undefined' must not be used because it is the default" - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - func_fatal_error "more than one -exported-symbols argument is not allowed" - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -framework) - prev=framework - continue - ;; - - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - func_append compile_command " $arg" - func_append finalize_command " $arg" - ;; - esac - continue - ;; - - -L*) - func_stripname '-L' '' "$arg" - dir=$func_stripname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of \`$dir'" - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "*) ;; - *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - continue - ;; - - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs System.ltframework" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - test "X$arg" = "X-lc" && continue - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - test "X$arg" = "X-lc" && continue - ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - deplibs="$deplibs $arg" - continue - ;; - - -module) - module=yes - continue - ;; - - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot) - compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - prev=xcompiler - continue - ;; - - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case "$new_inherited_linker_flags " in - *" $arg "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; - esac - continue - ;; - - -multi_module) - single_module="${wl}-multi_module" - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) - # The PATH hackery in wrapper scripts is required on Windows - # and Darwin in order for the loader to find any dlls it needs. - func_warning "\`-no-install' is ignored for $host" - func_warning "assuming \`-no-fast-install' instead" - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -o) prev=output ;; - - -precious-files-regex) - prev=precious_regex - continue - ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - func_stripname '-R' '' "$arg" - dir=$func_stripname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - - -shared) - # The effects of -shared are defined in a previous loop. - continue - ;; - - -shrext) - prev=shrext - continue - ;; - - -static | -static-libtool-libs) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; - - -weak) - prev=weak - continue - ;; - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Wl,*) - func_stripname '-Wl,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" - linker_flags="$linker_flags $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - -XCClinker) - prev=xcclinker - continue - ;; - - # -msg_* for osf cc - -msg_*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* pass through architecture-specific - # compiler args for GCC - # -F/path gives path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC - # @file GCC response files - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - func_append compile_command " $arg" - func_append finalize_command " $arg" - compiler_flags="$compiler_flags $arg" - continue - ;; - - # Some other compiler flag. - -* | +*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - - *.$objext) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "\`$arg' is not a valid libtool object" - fi - fi - ;; - - *.$libext) - # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" - prev= - else - deplibs="$deplibs $arg" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - done # argument parsing loop - - test -n "$prev" && \ - func_fatal_help "the \`$prevarg' option requires an argument" - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - func_basename "$output" - outputname="$func_basename_result" - libobjs_save="$libobjs" - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - func_dirname "$output" "/" "" - output_objdir="$func_dirname_result$objdir" - # Create the object directory. - func_mkdir_p "$output_objdir" - - # Determine the type of output - case $output in - "") - func_fatal_help "you must specify an output file" - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if $opt_duplicate_deps ; then - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - libs="$libs $deplib" - done - - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if $opt_duplicate_compiler_generated_deps; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; - esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - - case $linkmode in - lib) - passes="conv dlpreopen link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - - for pass in $passes; do - # The preopen pass in lib mode reverses $deplibs; put it back here - # so that -L comes before libs that need it for instance... - if test "$linkmode,$pass" = "lib,link"; then - ## FIXME: Find the place where the list is rebuilt in the wrong - ## order, and fix it there properly - tmp_deplibs= - for deplib in $deplibs; do - tmp_deplibs="$deplib $tmp_deplibs" - done - deplibs="$tmp_deplibs" - fi - - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; - link) - libs="$deplibs %DEPLIBS%" - test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" - ;; - esac - fi - if test "$linkmode,$pass" = "lib,dlpreopen"; then - # Collect and forward deplibs of preopened libtool libs - for lib in $dlprefiles; do - # Ignore non-libtool-libs - dependency_libs= - case $lib in - *.la) func_source "$lib" ;; - esac - - # Collect preopened libtool deplibs, except any this library - # has declared as weak libs - for deplib in $dependency_libs; do - deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` - case " $weak_libs " in - *" $deplib_base "*) ;; - *) deplibs="$deplibs $deplib" ;; - esac - done - done - libs="$dlprefiles" - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi - - for deplib in $libs; do - lib= - found=no - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - compiler_flags="$compiler_flags $deplib" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; - esac - fi - fi - continue - ;; - -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - func_warning "\`-l' is ignored for archives/objects" - continue - fi - func_stripname '-l' '' "$deplib" - name=$func_stripname_result - if test "$linkmode" = lib; then - searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" - else - searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" - fi - for searchdir in $searchdirs; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" - if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes - else - found=no - fi - break 2 - fi - done - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $deplib "*) - if func_lalib_p "$lib"; then - library_names= - old_library= - func_source "$lib" - for l in $old_library $library_names; do - ll="$l" - done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no - func_dirname "$lib" "" "." - ladir="$func_dirname_result" - lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - fi - ;; # -l - *.ltframework) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; - esac - fi - fi - continue - ;; - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; - prog) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test "$pass" = scan; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; - *) - func_warning "\`-L' is ignored for archives/objects" - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test "$pass" = link; then - func_stripname '-R' '' "$deplib" - dir=$func_stripname_result - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) lib="$deplib" ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - # Linking convenience modules into shared libraries is allowed, - # but linking other static libraries is non-portable. - case " $dlpreconveniencelibs " in - *" $deplib "*) ;; - *) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) - valid_a_lib=yes - ;; - esac - if test "$valid_a_lib" != yes; then - $ECHO - $ECHO "*** Warning: Trying to link with static lib archive $deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because the file extensions .$libext of this argument makes me believe" - $ECHO "*** that it is just a static archive that I should not use here." - else - $ECHO - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - ;; - esac - continue - ;; - prog) - if test "$pass" != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=yes - continue - ;; - esac # case $deplib - - if test "$found" = yes || test -f "$lib"; then : - else - func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" - fi - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$lib" \ - || func_fatal_error "\`$lib' is not a valid libtool archive" - - func_dirname "$lib" "" "." - ladir="$func_dirname_result" - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - inherited_linker_flags= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= - - - # Read the .la file - func_source "$lib" - - # Convert "-framework foo" to "foo.ltframework" - if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` - for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do - case " $new_inherited_linker_flags " in - *" $tmp_inherited_linker_flag "*) ;; - *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; - esac - done - fi - dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" - fi - - if test "$pass" = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for \`$lib'" - fi - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - elif test "$linkmode" != prog && test "$linkmode" != lib; then - func_fatal_error "\`$lib' is not a convenience library" - fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - continue - fi # $pass = conv - - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for \`$lib'" - fi - - # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - func_fatal_error "cannot -dlopen a convenience library: \`$lib'" - fi - if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" - else - newdlfiles="$newdlfiles $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of \`$ladir'" - func_warning "passing it literally to the linker, although it might fail" - abs_ladir="$ladir" - fi - ;; - esac - func_basename "$lib" - laname="$func_basename_result" - - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library \`$lib' was moved." - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$libdir" - absdir="$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi - fi # $installed = yes - func_stripname 'lib' '.la' "$laname" - name=$func_stripname_result - - # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir" && test "$linkmode" = prog; then - func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test "$linkmode" = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - - if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; - esac - # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || - test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath:" in - *"$absdir:"*) ;; - *) temp_rpath="$temp_rpath$absdir:" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes; then - use_static_libs=no - fi - if test -n "$library_names" && - { test "$use_static_libs" = no || test -z "$old_library"; }; then - case $host in - *cygwin* | *mingw*) - # No point in relinking DLLs because paths are not encoded - notinst_deplibs="$notinst_deplibs $lib" - need_relink=no - ;; - *) - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi - ;; - esac - # This is a shared library - - # Warn about portability, can't link against -module's on some - # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule="" - for dlpremoduletest in $dlprefiles; do - if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule="$dlpremoduletest" - break - fi - done - if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then - $ECHO - if test "$linkmode" = prog; then - $ECHO "*** Warning: Linking the executable $output against the loadable module" - else - $ECHO "*** Warning: Linking the shared library $output against the loadable module" - fi - $ECHO "*** $linklib is not portable!" - fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - shift - realname="$1" - shift - libname=`eval "\\$ECHO \"$libname_spec\""` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw*) - func_arith $current - $age - major=$func_arith_result - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - func_basename "$soroot" - soname="$func_basename_result" - func_stripname 'lib' '.dll' "$soname" - newlib=libimp-$func_stripname_result.a - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - func_verbose "extracting exported symbol list from \`$soname'" - func_execute_cmds "$extract_expsyms_cmds" 'exit $?' - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for \`$soname'" - func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test "$linkmode" = prog || test "$mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - case $host in - *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; - *-*-sysv4*uw2*) add_dir="-L$dir" ;; - *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir="-L$dir" ;; - *-*-darwin* ) - # if the lib is a (non-dlopened) module then we can not - # link against it, someone is ignoring the earlier warnings - if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null ; then - if test "X$dlopenmodule" != "X$lib"; then - $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $ECHO - $ECHO "*** And there doesn't seem to be a static archive available" - $ECHO "*** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi - elif test -n "$old_library"; then - add="$dir/$old_library" - fi - fi - esac - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test "$lib_linked" != yes; then - func_fatal_configuration "unsupported hardcode properties" - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && - test "$hardcode_minus_L" != yes && - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - fi - fi - fi - - if test "$linkmode" = prog || test "$mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" - else - add="$libdir/$linklib" - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - fi - - if test "$linkmode" = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test "$linkmode" = prog; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - $ECHO - $ECHO "*** Warning: This system can not link to static lib archive $lib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - $ECHO "*** But as you try to build a module library, libtool will still create " - $ECHO "*** a static module, that should work as long as the dlopening application" - $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test "$linkmode" = lib; then - if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) func_stripname '-R' '' "$libdir" - temp_xrpath=$func_stripname_result - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) temp_deplibs="$temp_deplibs $libdir";; - esac - done - dependency_libs="$temp_deplibs" - fi - - newlib_search_path="$newlib_search_path $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - - if test "$link_all_deplibs" != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - case $deplib in - -L*) path="$deplib" ;; - *.la) - func_dirname "$deplib" "" "." - dir="$func_dirname_result" - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of \`$dir'" - absdir="$dir" - fi - ;; - esac - if $GREP "^installed=no" $deplib > /dev/null; then - case $host in - *-*-darwin*) - depdepl= - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do - depdepl=$tmp - done - if test -f "$absdir/$objdir/$depdepl" ; then - depdepl="$absdir/$objdir/$depdepl" - darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - if test -z "$darwin_install_name"; then - darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - fi - compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" - path= - fi - fi - ;; - *) - path="-L$absdir/$objdir" - ;; - esac - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" - test "$absdir" != "$libdir" && \ - func_warning "\`$deplib' seems to be moved" - - path="-L$absdir" - fi - ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - if test "$pass" = link; then - if test "$linkmode" = "prog"; then - compile_deplibs="$new_inherited_linker_flags $compile_deplibs" - finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" - else - compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - fi - fi - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; - esac - done - newlib_search_path= - fi - - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs ; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i="" - ;; - esac - if test -n "$i" ; then - tmp_libs="$tmp_libs $i" - fi - done - dependency_libs=$tmp_libs - done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" - fi - if test "$linkmode" = prog || test "$linkmode" = lib; then - dlprefiles="$newdlprefiles" - fi - - case $linkmode in - oldlib) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for archives" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for archives" ;; - esac - - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for archives" - - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for archives" - - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for archives" - - test -n "$release" && \ - func_warning "\`-release' is ignored for archives" - - test -n "$export_symbols$export_symbols_regex" && \ - func_warning "\`-export-symbols' is ignored for archives" - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - objs="$objs$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - func_stripname 'lib' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - ;; - *) - test "$module" = no && \ - func_fatal_help "libtool library \`$output' must begin with \`lib'" - - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - func_stripname '' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - func_stripname '' '.la' "$outputname" - libname=$func_stripname_result - fi - ;; - esac - - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" - else - $ECHO - $ECHO "*** Warning: Linking the shared library $output against the non-libtool" - $ECHO "*** objects $objs is not portable!" - libobjs="$libobjs $objs" - fi - fi - - test "$dlself" != no && \ - func_warning "\`-dlopen self' is ignored for libtool libraries" - - set dummy $rpath - shift - test "$#" -gt 1 && \ - func_warning "ignoring multiple \`-rpath's for a libtool library" - - install_libdir="$1" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for convenience libraries" - - test -n "$release" && \ - func_warning "\`-release' is ignored for convenience libraries" - else - - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - shift - IFS="$save_ifs" - - test -n "$7" && \ - func_fatal_help "too many parameters to \`-version-info'" - - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible - - case $vinfo_number in - yes) - number_major="$1" - number_minor="$2" - number_revision="$3" - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # which has an extra 1 added just for fun - # - case $version_type in - darwin|linux|osf|windows|none) - func_arith $number_major + $number_minor - current=$func_arith_result - age="$number_minor" - revision="$number_revision" - ;; - freebsd-aout|freebsd-elf|sunos) - current="$number_major" - revision="$number_minor" - age="0" - ;; - irix|nonstopux) - func_arith $number_major + $number_minor - current=$func_arith_result - age="$number_minor" - revision="$number_minor" - lt_irix_increment=no - ;; - *) - func_fatal_configuration "$modename: unknown library version type \`$version_type'" - ;; - esac - ;; - no) - current="$1" - revision="$2" - age="$3" - ;; - esac - - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "CURRENT \`$current' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "REVISION \`$revision' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "AGE \`$age' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - if test "$age" -gt "$current"; then - func_error "AGE \`$age' is greater than the current interface number \`$current'" - func_fatal_error "\`$vinfo' is not valid version information" - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - func_arith $current - $age - major=.$func_arith_result - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - func_arith $current + 1 - minor_current=$func_arith_result - xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current" - ;; - - irix | nonstopux) - if test "X$lt_irix_increment" = "Xno"; then - func_arith $current - $age - else - func_arith $current - $age + 1 - fi - major=$func_arith_result - - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test "$loop" -ne 0; do - func_arith $revision - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring="$verstring_prefix$major.$iface:$verstring" - done - - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; - - linux) - func_arith $current - $age - major=.$func_arith_result - versuffix="$major.$age.$revision" - ;; - - osf) - func_arith $current - $age - major=.$func_arith_result - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test "$loop" -ne 0; do - func_arith $current - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - qnx) - major=".$current" - versuffix=".$current" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - func_arith $current - $age - major=$func_arith_result - versuffix="-$major" - ;; - - *) - func_fatal_configuration "unknown library version type \`$version_type'" - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - func_warning "undefined symbols not allowed in $host shared libraries" - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - - fi - - func_generate_dlsyms "$libname" "$libname" "yes" - libobjs="$libobjs $symfileobj" - test "X$libobjs" = "X " && libobjs= - - if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$ECHO "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then - if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - removelist="$removelist $p" - ;; - *) ;; - esac - done - test -n "$removelist" && \ - func_show_eval "${RM}r \$removelist" - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - #for path in $notinst_path; do - # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` - # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` - # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` - #done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; - esac - done - - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - deplibs="$deplibs System.ltframework" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $opt_dry_run || $RM conftest.c - cat > conftest.c </dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null | - $GREP " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | - $SED -e 10q | - $EGREP "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $ECHO - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for file magic test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a file magic. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ - $EGREP "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $ECHO - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a regex pattern. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ - -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` - done - fi - if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | - $GREP . >/dev/null; then - $ECHO - if test "X$deplibs_check_method" = "Xnone"; then - $ECHO "*** Warning: inter-library dependencies are not supported in this platform." - else - $ECHO "*** Warning: inter-library dependencies are not known to be supported." - fi - $ECHO "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - ;; - esac - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - $ECHO - $ECHO "*** Warning: libtool could not satisfy all declared inter-library" - $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - $ECHO "*** a static module, that should work as long as the dlopening" - $ECHO "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - $ECHO "*** The inter-library dependencies that have been dropped here will be" - $ECHO "*** automatically added whenever a program is linked with this library" - $ECHO "*** or is declared to -dlopen it." - - if test "$allow_undefined" = no; then - $ECHO - $ECHO "*** Since this library must not contain undefined symbols," - $ECHO "*** because either the platform does not support them or" - $ECHO "*** it was explicitly requested with -no-undefined," - $ECHO "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - case $host in - *-*-darwin*) - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; - esac - ;; - *) new_libs="$new_libs $deplib" ;; - esac - done - deplibs="$new_libs" - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - if test "$hardcode_into_libs" = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" - test "$mode" != relink && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - if test -n "$hardcode_libdir_flag_spec_ld"; then - eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" - else - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" - eval library_names=\"$library_names_spec\" - set dummy $library_names - shift - realname="$1" - shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib="$output_objdir/$realname" - linknames= - for link - do - linknames="$linknames $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - test "X$libobjs" = "X " && libobjs= - - delfiles= - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols="$output_objdir/$libname.uexp" - delfiles="$delfiles $export_symbols" - fi - - orig_export_symbols= - case $host_os in - cygwin* | mingw*) - if test -n "$export_symbols" && test -z "$export_symbols_regex"; then - # exporting using user supplied symfile - if test "x`$SED 1q $export_symbols`" != xEXPORTS; then - # and it's NOT already a .def file. Must figure out - # which of the given symbols are data symbols and tag - # them as such. So, trigger use of export_symbols_cmds. - # export_symbols gets reassigned inside the "prepare - # the list of exported symbols" if statement, so the - # include_expsyms logic still works. - orig_export_symbols="$export_symbols" - export_symbols= - always_export_symbols=yes - fi - fi - ;; - esac - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols - cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - func_len " $cmd" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - else - # The command line is too long to execute in one step. - func_verbose "using reloadable object file for export list..." - skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break - fi - done - IFS="$save_ifs" - if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' - fi - - if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac - done - deplibs="$tmp_deplibs" - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec" && - test "$compiler_needs_object" = yes && - test -z "$libobjs"; then - # extract the archives, so we have objects to list. - # TODO: could optimize this to just extract one archive. - whole_archive_flag_spec= - fi - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - else - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? - fi - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi - - if test "X$skipped_export" != "X:" && - func_len " $test_cmds" && - len=$func_len_result && - test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise - # or, if using GNU ld and skipped_export is not :, use a linker - # script. - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - output_la=`$ECHO "X$output" | $Xsed -e "$basename"` - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - last_robj= - k=1 - - if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then - output=${output_objdir}/${output_la}.lnkscript - func_verbose "creating GNU ld script: $output" - $ECHO 'INPUT (' > $output - for obj in $save_libobjs - do - $ECHO "$obj" >> $output - done - $ECHO ')' >> $output - delfiles="$delfiles $output" - elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then - output=${output_objdir}/${output_la}.lnk - func_verbose "creating linker input file list: $output" - : > $output - set x $save_libobjs - shift - firstobj= - if test "$compiler_needs_object" = yes; then - firstobj="$1 " - shift - fi - for obj - do - $ECHO "$obj" >> $output - done - delfiles="$delfiles $output" - output=$firstobj\"$file_list_spec$output\" - else - if test -n "$save_libobjs"; then - func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-${k}.$objext - eval test_cmds=\"$reload_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - if test "X$objlist" = X || - test "$len" -lt "$max_cmd_len"; then - func_append objlist " $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" - fi - last_robj=$output_objdir/$output_la-${k}.$objext - func_arith $k + 1 - k=$func_arith_result - output=$output_objdir/$output_la-${k}.$objext - objlist=$obj - func_len " $last_robj" - func_arith $len0 + $func_len_result - len=$func_arith_result - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - if test -n "$last_robj"; then - eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" - fi - delfiles="$delfiles $output" - - else - output= - fi - - if ${skipped_export-false}; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols - libobjs=$output - # Append the command to create the export file. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - fi - - test -n "$save_libobjs" && - func_verbose "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - - if test -n "$export_symbols_regex" && ${skipped_export-false}; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - - if ${skipped_export-false}; then - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' - fi - - if test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - fi - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi - fi - - if test -n "$delfiles"; then - # Append the command to remove temporary files to $cmds. - eval cmds=\"\$cmds~\$RM $delfiles\" - fi - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $dlprefiles - libobjs="$libobjs $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - func_show_eval '${RM}r "$gentop"' - fi - fi - - exit $EXIT_SUCCESS - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - obj) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for objects" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for objects" ;; - esac - - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for objects" - - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for objects" - - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for objects" - - test -n "$release" && \ - func_warning "\`-release' is ignored for objects" - - case $output in - *.lo) - test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object \`$output' from non-libtool objects" - - libobj=$output - func_lo2o "$libobj" - obj=$func_lo2o_result - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $opt_dry_run || $RM $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec and hope we can get by with - # turning comma into space.. - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` - else - gentop="$output_objdir/${obj}x" - generated="$generated $gentop" - - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi - - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - - output="$obj" - func_execute_cmds "$reload_cmds" 'exit $?' - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - fi - - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - func_execute_cmds "$reload_cmds" 'exit $?' - fi - - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - ;; - - prog) - case $host in - *cygwin*) func_stripname '' '.exe' "$output" - output=$func_stripname_result.exe;; - esac - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for programs" - - test -n "$release" && \ - func_warning "\`-release' is ignored for programs" - - test "$preload" = yes \ - && test "$dlopen_support" = unknown \ - && test "$dlopen_self" = unknown \ - && test "$dlopen_self_static" = unknown && \ - func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - ;; - esac - - case $host in - *-*-darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - # But is supposedly fixed on 10.4 or later (yay!). - if test "$tagname" = CXX ; then - case ${MACOSX_DEPLOYMENT_TARGET-10.0} in - 10.[0123]) - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - ;; - esac - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; - esac - ;; - *) new_libs="$new_libs $deplib" ;; - esac - done - compile_deplibs="$new_libs" - - - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$libdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - - # template prelinking step - if test -n "$prelink_cmds"; then - func_execute_cmds "$prelink_cmds" 'exit $?' - fi - - wrappers_required=yes - case $host in - *cygwin* | *mingw* ) - if test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - *) - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - esac - if test "$wrappers_required" = no; then - # Replace the output file specification. - compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - exit_status=0 - func_show_eval "$link_command" 'exit_status=$?' - - # Delete the generated files. - if test -f "$output_objdir/${outputname}S.${objext}"; then - func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' - fi - - exit $exit_status - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $opt_dry_run || $RM $output - # Link the executable and exit - func_show_eval "$link_command" 'exit $?' - exit $EXIT_SUCCESS - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "\`$output' will be relinked during installation" - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - - func_show_eval "$link_command" 'exit $?' - - # Now create the wrapper script. - func_verbose "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $ECHO for shipping. - if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; - esac - qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if not in dry run mode. - $opt_dry_run || { - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) func_stripname '' '.exe' "$output" - output=$func_stripname_result ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - func_stripname '' '.exe' "$outputname" - outputname=$func_stripname_result ;; - *) exeext= ;; - esac - case $host in - *cygwin* | *mingw* ) - func_dirname_and_basename "$output" "" "." - output_name=$func_basename_result - output_path=$func_dirname_result - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" - $RM $cwrappersource $cwrapper - trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - func_emit_cwrapperexe_src > $cwrappersource - - # we should really use a build-platform specific compiler - # here, but OTOH, the wrappers (shell script and this C one) - # are only useful if you want to execute the "real" binary. - # Since the "real" binary is built for $host, then this - # wrapper might as well be built for $host, too. - $opt_dry_run || { - $LTCC $LTCFLAGS -o $cwrapper $cwrappersource - $STRIP $cwrapper - } - - # Now, create the wrapper script for func_source use: - func_ltwrapper_scriptname $cwrapper - $RM $func_ltwrapper_scriptname_result - trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 - $opt_dry_run || { - # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host" ; then - $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result - else - func_emit_wrapper no > $func_ltwrapper_scriptname_result - fi - } - ;; - * ) - $RM $output - trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - - func_emit_wrapper no > $output - chmod +x $output - ;; - esac - } - exit $EXIT_SUCCESS - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save $symfileobj" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$old_deplibs $non_pic_objects" - if test "$preload" = yes && test -f "$symfileobj"; then - oldobjs="$oldobjs $symfileobj" - fi - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds - else - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $dlprefiles - oldobjs="$oldobjs $func_extract_archives_result" - fi - - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - func_basename "$obj" - $ECHO "$func_basename_result" - done | sort | sort -uc >/dev/null 2>&1); then - : - else - $ECHO "copying selected object files to avoid basename conflicts..." - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - func_mkdir_p "$gentop" - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - func_basename "$obj" - objbase="$func_basename_result" - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - func_arith $counter + 1 - counter=$func_arith_result - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - oldobjs="$oldobjs $gentop/$newobj" - ;; - *) oldobjs="$oldobjs $obj" ;; - esac - done - fi - eval cmds=\"$old_archive_cmds\" - - func_len " $cmds" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - func_verbose "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - oldobjs= - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - eval test_cmds=\"$old_archive_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - for obj in $save_oldobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - func_append objlist " $obj" - if test "$len" -lt "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - len=$len0 - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test "X$oldobjs" = "X" ; then - eval cmds=\"\$concat_cmds\" - else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" - fi - fi - fi - func_execute_cmds "$cmds" 'exit $?' - done - - test -n "$generated" && \ - func_show_eval "${RM}r$generated" - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - func_verbose "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then - relink_command= - fi - - # Only create the output if not a dry run. - $opt_dry_run || { - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - func_basename "$deplib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" - newdependency_libs="$newdependency_libs $libdir/$name" - ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; - esac - done - dependency_libs="$newdependency_libs" - newdlfiles= - - for lib in $dlfiles; do - case $lib in - *.la) - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - newdlfiles="$newdlfiles $libdir/$name" - ;; - *) newdlfiles="$newdlfiles $lib" ;; - esac - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - *.la) - # Only pass preopened files to the pseudo-archive (for - # eventual linking with the app. that links it) if we - # didn't already link the preopened objects directly into - # the library: - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - newdlprefiles="$newdlprefiles $libdir/$name" - ;; - esac - done - dlprefiles="$newdlprefiles" - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlfiles="$newdlfiles $abs" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlprefiles="$newdlprefiles $abs" - done - dlprefiles="$newdlprefiles" - fi - $RM $output - # place dlname in correct position for cygwin - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; - esac - $ECHO > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Linker flags that can not go in dependency_libs. -inherited_linker_flags='$new_inherited_linker_flags' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Names of additional weak libraries provided by this library -weak_library_names='$weak_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Should we warn about portability when linking against -modules? -shouldnotlink=$module - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then - $ECHO >> $output "\ -relink_command=\"$relink_command\"" - fi - done - } - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' - ;; - esac - exit $EXIT_SUCCESS -} - -{ test "$mode" = link || test "$mode" = relink; } && - func_mode_link ${1+"$@"} - - -# func_mode_uninstall arg... -func_mode_uninstall () -{ - $opt_debug - RM="$nonopt" - files= - rmforce= - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - for arg - do - case $arg in - -f) RM="$RM $arg"; rmforce=yes ;; - -*) RM="$RM $arg" ;; - *) files="$files $arg" ;; - esac - done - - test -z "$RM" && \ - func_fatal_help "you must specify an RM program" - - rmdirs= - - origobjdir="$objdir" - for file in $files; do - func_dirname "$file" "" "." - dir="$func_dirname_result" - if test "X$dir" = X.; then - objdir="$origobjdir" - else - objdir="$dir/$origobjdir" - fi - func_basename "$file" - name="$func_basename_result" - test "$mode" = uninstall && objdir="$dir" - - # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then - case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if { test -L "$file"; } >/dev/null 2>&1 || - { test -h "$file"; } >/dev/null 2>&1 || - test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif test "$rmforce" = yes; then - continue - fi - - rmfiles="$file" - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if func_lalib_p "$file"; then - func_source $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - - case "$mode" in - clean) - case " $library_names " in - # " " in the beginning catches empty $dlname - *" $dlname "*) ;; - *) rmfiles="$rmfiles $objdir/$dlname" ;; - esac - test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - ;; - uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - # FIXME: should reinstall the best remaining shared library. - ;; - esac - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if func_lalib_p "$file"; then - - # Read the .lo file - func_source $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" && - test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && - test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" - fi - fi - ;; - - *) - if test "$mode" = clean ; then - noexename=$name - case $file in - *.exe) - func_stripname '' '.exe' "$file" - file=$func_stripname_result - func_stripname '' '.exe' "$name" - noexename=$func_stripname_result - # $file with .exe has already been added to rmfiles, - # add $file without .exe - rmfiles="$rmfiles $file" - ;; - esac - # Do a test to see if this is a libtool program. - if func_ltwrapper_p "$file"; then - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - relink_command= - func_source $func_ltwrapper_scriptname_result - rmfiles="$rmfiles $func_ltwrapper_scriptname_result" - else - relink_command= - func_source $dir/$noexename - fi - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" - fi - if test "X$noexename" != "X$name" ; then - rmfiles="$rmfiles $objdir/lt-${noexename}.c" - fi - fi - fi - ;; - esac - func_show_eval "$RM $rmfiles" 'exit_status=1' - done - objdir="$origobjdir" - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - func_show_eval "rmdir $dir >/dev/null 2>&1" - fi - done - - exit $exit_status -} - -{ test "$mode" = uninstall || test "$mode" = clean; } && - func_mode_uninstall ${1+"$@"} - -test -z "$mode" && { - help="$generic_help" - func_fatal_help "you must specify a MODE" -} - -test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$mode'" - -if test -n "$exec_cmd"; then - eval exec "$exec_cmd" - exit $EXIT_FAILURE -fi - -exit $exit_status - - -# The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: -# vi:sw=2 - diff -Nru tint2-0.7.1/m4/libtool.m4 tint2-0.9/m4/libtool.m4 --- tint2-0.7.1/m4/libtool.m4 2008-09-01 18:32:11.000000000 +0100 +++ tint2-0.9/m4/libtool.m4 1970-01-01 01:00:00.000000000 +0100 @@ -1,7325 +0,0 @@ -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -m4_define([_LT_COPYING], [dnl -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -]) - -# serial 56 LT_INIT - - -# LT_PREREQ(VERSION) -# ------------------ -# Complain and exit if this libtool version is less that VERSION. -m4_defun([LT_PREREQ], -[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, - [m4_default([$3], - [m4_fatal([Libtool version $1 or higher is required], - 63)])], - [$2])]) - - -# _LT_CHECK_BUILDDIR -# ------------------ -# Complain if the absolute build directory name contains unusual characters -m4_defun([_LT_CHECK_BUILDDIR], -[case `pwd` in - *\ * | *\ *) - AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; -esac -]) - - -# LT_INIT([OPTIONS]) -# ------------------ -AC_DEFUN([LT_INIT], -[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -AC_BEFORE([$0], [LT_LANG])dnl -AC_BEFORE([$0], [LT_OUTPUT])dnl -AC_BEFORE([$0], [LTDL_INIT])dnl -m4_require([_LT_CHECK_BUILDDIR])dnl - -dnl Autoconf doesn't catch unexpanded LT_ macros by default: -m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -dnl unless we require an AC_DEFUNed macro: -AC_REQUIRE([LTOPTIONS_VERSION])dnl -AC_REQUIRE([LTSUGAR_VERSION])dnl -AC_REQUIRE([LTVERSION_VERSION])dnl -AC_REQUIRE([LTOBSOLETE_VERSION])dnl -m4_require([_LT_PROG_LTMAIN])dnl - -dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -_LT_SETUP - -# Only expand once: -m4_define([LT_INIT]) -])# LT_INIT - -# Old names: -AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -dnl AC_DEFUN([AM_PROG_LIBTOOL], []) - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -m4_defun([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -]) - - -# _LT_FILEUTILS_DEFAULTS -# ---------------------- -# It is okay to use these file commands and assume they have been set -# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. -m4_defun([_LT_FILEUTILS_DEFAULTS], -[: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} -])# _LT_FILEUTILS_DEFAULTS - - -# _LT_SETUP -# --------- -m4_defun([_LT_SETUP], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -_LT_DECL([], [host_alias], [0], [The host system])dnl -_LT_DECL([], [host], [0])dnl -_LT_DECL([], [host_os], [0])dnl -dnl -_LT_DECL([], [build_alias], [0], [The build system])dnl -_LT_DECL([], [build], [0])dnl -_LT_DECL([], [build_os], [0])dnl -dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -test -z "$LN_S" && LN_S="ln -s" -_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -dnl -AC_REQUIRE([LT_CMD_MAX_LEN])dnl -_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl -dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_CMD_RELOAD])dnl -m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CMD_OLD_ARCHIVE])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl - -_LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi -]) -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -_LT_CHECK_OBJDIR - -m4_require([_LT_TAG_COMPILER])dnl -_LT_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - _LT_PATH_MAGIC - fi - ;; -esac - -# Use C for the default configuration in the libtool script -LT_SUPPORTED_TAG([CC]) -_LT_LANG_C_CONFIG -_LT_LANG_DEFAULT_CONFIG -_LT_CONFIG_COMMANDS -])# _LT_SETUP - - -# _LT_PROG_LTMAIN -# --------------- -# Note that this code is called both from `configure', and `config.status' -# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# `config.status' has no value for ac_aux_dir unless we are using Automake, -# so we pass a copy along to make sure it has a sensible value anyway. -m4_defun([_LT_PROG_LTMAIN], -[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain="$ac_aux_dir/ltmain.sh" -])# _LT_PROG_LTMAIN - - -## ------------------------------------- ## -## Accumulate code for creating libtool. ## -## ------------------------------------- ## - -# So that we can recreate a full libtool script including additional -# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the `libtool' -# label. - - -# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -# ---------------------------------------- -# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL_INIT], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_INIT], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_INIT]) - - -# _LT_CONFIG_LIBTOOL([COMMANDS]) -# ------------------------------ -# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) - - -# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -# ----------------------------------------------------- -m4_defun([_LT_CONFIG_SAVE_COMMANDS], -[_LT_CONFIG_LIBTOOL([$1]) -_LT_CONFIG_LIBTOOL_INIT([$2]) -]) - - -# _LT_FORMAT_COMMENT([COMMENT]) -# ----------------------------- -# Add leading comment marks to the start of each line, and a trailing -# full-stop to the whole comment if one is not present already. -m4_define([_LT_FORMAT_COMMENT], -[m4_ifval([$1], [ -m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], - [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -)]) - - - -## ------------------------ ## -## FIXME: Eliminate VARNAME ## -## ------------------------ ## - - -# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -# ------------------------------------------------------------------- -# CONFIGNAME is the name given to the value in the libtool script. -# VARNAME is the (base) name used in the configure script. -# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -# VARNAME. Any other value will be used directly. -m4_define([_LT_DECL], -[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], - [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], - [m4_ifval([$1], [$1], [$2])]) - lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) - m4_ifval([$4], - [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) - lt_dict_add_subkey([lt_decl_dict], [$2], - [tagged?], [m4_ifval([$5], [yes], [no])])]) -]) - - -# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -# -------------------------------------------------------- -m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) - - -# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_tag_varnames], -[_lt_decl_filter([tagged?], [yes], $@)]) - - -# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -# --------------------------------------------------------- -m4_define([_lt_decl_filter], -[m4_case([$#], - [0], [m4_fatal([$0: too few arguments: $#])], - [1], [m4_fatal([$0: too few arguments: $#: $1])], - [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], - [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], - [lt_dict_filter([lt_decl_dict], $@)])[]dnl -]) - - -# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -# -------------------------------------------------- -m4_define([lt_decl_quote_varnames], -[_lt_decl_filter([value], [1], $@)]) - - -# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_dquote_varnames], -[_lt_decl_filter([value], [2], $@)]) - - -# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_varnames_tagged], -[_$0(m4_quote(m4_default([$1], [[, ]])), - m4_quote(m4_if([$2], [], - m4_quote(lt_decl_tag_varnames), - m4_quote(m4_shift($@)))), - m4_split(m4_normalize(m4_quote(_LT_TAGS))))]) -m4_define([_lt_decl_varnames_tagged], [lt_combine([$1], [$2], [_], $3)]) - - -# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_all_varnames], -[_$0(m4_quote(m4_default([$1], [[, ]])), - m4_if([$2], [], - m4_quote(lt_decl_varnames), - m4_quote(m4_shift($@))))[]dnl -]) -m4_define([_lt_decl_all_varnames], -[lt_join($@, lt_decl_varnames_tagged([$1], - lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -]) - - -# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -# ------------------------------------ -# Quote a variable value, and forward it to `config.status' so that its -# declaration there will have the same value as in `configure'. VARNAME -# must have a single quote delimited value for this to work. -m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) - - -# _LT_CONFIG_STATUS_DECLARATIONS -# ------------------------------ -# We delimit libtool config variables with single quotes, so when -# we write them to config.status, we have to be sure to quote all -# embedded single quotes properly. In configure, this macro expands -# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -# -# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' -m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), - [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAGS -# ---------------- -# Output comment and list of tags supported by the script -m4_defun([_LT_LIBTOOL_TAGS], -[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags="_LT_TAGS"dnl -]) - - -# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -# ----------------------------------- -# Extract the dictionary values for VARNAME (optionally with TAG) and -# expand to a commented shell variable setting: -# -# # Some comment about what VAR is for. -# visible_name=$lt_internal_name -m4_define([_LT_LIBTOOL_DECLARE], -[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], - [description])))[]dnl -m4_pushdef([_libtool_name], - m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), - [0], [_libtool_name=[$]$1], - [1], [_libtool_name=$lt_[]$1], - [2], [_libtool_name=$lt_[]$1], - [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -]) - - -# _LT_LIBTOOL_CONFIG_VARS -# ----------------------- -# Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' -# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -# section) are produced by _LT_LIBTOOL_TAG_VARS. -m4_defun([_LT_LIBTOOL_CONFIG_VARS], -[m4_foreach([_lt_var], - m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAG_VARS(TAG) -# ------------------------- -m4_define([_LT_LIBTOOL_TAG_VARS], -[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) - - -# _LT_TAGVAR(VARNAME, [TAGNAME]) -# ------------------------------ -m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) - - -# _LT_CONFIG_COMMANDS -# ------------------- -# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -# variables for single and double quote escaping we saved from calls -# to _LT_DECL, we can put quote escaped variables declarations -# into `config.status', and then the shell code to quote escape them in -# for loops in `config.status'. Finally, any additional code accumulated -# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -m4_defun([_LT_CONFIG_COMMANDS], -[AC_PROVIDE_IFELSE([LT_OUTPUT], - dnl If the libtool generation code has been placed in $CONFIG_LT, - dnl instead of duplicating it all over again into config.status, - dnl then we will have config.status run $CONFIG_LT later, so it - dnl needs to know what name is stored there: - [AC_CONFIG_COMMANDS([libtool], - [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], - dnl If the libtool generation code is destined for config.status, - dnl expand the accumulated commands and init code now: - [AC_CONFIG_COMMANDS([libtool], - [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -])#_LT_CONFIG_COMMANDS - - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -[ - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -_LT_CONFIG_STATUS_DECLARATIONS -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# Quote evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Fix-up fallback echo if it was mangled by the above quoting rules. -case \$lt_ECHO in -*'\\\[$]0 --fallback-echo"')dnl " - lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` - ;; -esac - -_LT_OUTPUT_LIBTOOL_INIT -]) - - -# LT_OUTPUT -# --------- -# This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), incase it is used in configure for compilation -# tests. -AC_DEFUN([LT_OUTPUT], -[: ${CONFIG_LT=./config.lt} -AC_MSG_NOTICE([creating $CONFIG_LT]) -cat >"$CONFIG_LT" <<_LTEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate a libtool stub with the current configuration. - -lt_cl_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AS_SHELL_SANITIZE -_AS_PREPARE - -exec AS_MESSAGE_FD>&1 -exec AS_MESSAGE_LOG_FD>>config.log -{ - echo - AS_BOX([Running $as_me.]) -} >&AS_MESSAGE_LOG_FD - -lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. - -Usage: $[0] [[OPTIONS]] - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - -Report bugs to ." - -lt_cl_version="\ -m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -configured by $[0], generated by m4_PACKAGE_STRING. - -Copyright (C) 2008 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." - -while test $[#] != 0 -do - case $[1] in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; - - -*) AC_MSG_ERROR([unrecognized option: $[1] -Try \`$[0] --help' for more information.]) ;; - - *) AC_MSG_ERROR([unrecognized argument: $[1] -Try \`$[0] --help' for more information.]) ;; - esac - shift -done - -if $lt_cl_silent; then - exec AS_MESSAGE_FD>/dev/null -fi -_LTEOF - -cat >>"$CONFIG_LT" <<_LTEOF -_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AC_MSG_NOTICE([creating $ofile]) -_LT_OUTPUT_LIBTOOL_COMMANDS -AS_EXIT(0) -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -if test "$no_create" != yes; then - lt_cl_success=: - test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" - exec AS_MESSAGE_LOG_FD>/dev/null - $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false - exec AS_MESSAGE_LOG_FD>>config.log - $lt_cl_success || AS_EXIT(1) -fi -])# LT_OUTPUT - - -# _LT_CONFIG(TAG) -# --------------- -# If TAG is the built-in tag, create an initial libtool script with a -# default configuration from the untagged config vars. Otherwise add code -# to config.status for appending the configuration named by TAG from the -# matching tagged config vars. -m4_defun([_LT_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_CONFIG_SAVE_COMMANDS([ - m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl - m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -_LT_COPYING -_LT_LIBTOOL_TAGS - -# ### BEGIN LIBTOOL CONFIG -_LT_LIBTOOL_CONFIG_VARS -_LT_LIBTOOL_TAG_VARS -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - _LT_PROG_LTMAIN - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - _LT_PROG_XSI_SHELLFNS - - sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -], -[cat <<_LT_EOF >> "$ofile" - -dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -dnl in a comment (ie after a #). -# ### BEGIN LIBTOOL TAG CONFIG: $1 -_LT_LIBTOOL_TAG_VARS(_LT_TAG) -# ### END LIBTOOL TAG CONFIG: $1 -_LT_EOF -])dnl /m4_if -], -[m4_if([$1], [], [ - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile'], []) -])dnl /_LT_CONFIG_SAVE_COMMANDS -])# _LT_CONFIG - - -# LT_SUPPORTED_TAG(TAG) -# --------------------- -# Trace this macro to discover what tags are supported by the libtool -# --tag option, using: -# autoconf --trace 'LT_SUPPORTED_TAG:$1' -AC_DEFUN([LT_SUPPORTED_TAG], []) - - -# C support is built-in for now -m4_define([_LT_LANG_C_enabled], []) -m4_define([_LT_TAGS], []) - - -# LT_LANG(LANG) -# ------------- -# Enable libtool support for the given language if not already enabled. -AC_DEFUN([LT_LANG], -[AC_BEFORE([$0], [LT_OUTPUT])dnl -m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], - [Windows Resource], [_LT_LANG(RC)], - [m4_ifdef([_LT_LANG_]$1[_CONFIG], - [_LT_LANG($1)], - [m4_fatal([$0: unsupported language: "$1"])])])dnl -])# LT_LANG - - -# _LT_LANG(LANGNAME) -# ------------------ -m4_defun([_LT_LANG], -[m4_ifdef([_LT_LANG_]$1[_enabled], [], - [LT_SUPPORTED_TAG([$1])dnl - m4_append([_LT_TAGS], [$1 ])dnl - m4_define([_LT_LANG_]$1[_enabled], [])dnl - _LT_LANG_$1_CONFIG($1)])dnl -])# _LT_LANG - - -# _LT_LANG_DEFAULT_CONFIG -# ----------------------- -m4_defun([_LT_LANG_DEFAULT_CONFIG], -[AC_PROVIDE_IFELSE([AC_PROG_CXX], - [LT_LANG(CXX)], - [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) - -AC_PROVIDE_IFELSE([AC_PROG_F77], - [LT_LANG(F77)], - [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) - -AC_PROVIDE_IFELSE([AC_PROG_FC], - [LT_LANG(FC)], - [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) - -dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -dnl pulling things in needlessly. -AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([LT_PROG_GCJ], - [LT_LANG(GCJ)], - [m4_ifdef([AC_PROG_GCJ], - [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([A][M_PROG_GCJ], - [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([LT_PROG_GCJ], - [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) - -AC_PROVIDE_IFELSE([LT_PROG_RC], - [LT_LANG(RC)], - [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -])# _LT_LANG_DEFAULT_CONFIG - -# Obsolete macros: -AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -dnl AC_DEFUN([AC_LIBTOOL_F77], []) -dnl AC_DEFUN([AC_LIBTOOL_FC], []) -dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) - - -# _LT_TAG_COMPILER -# ---------------- -m4_defun([_LT_TAG_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_TAG_COMPILER - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -m4_defun([_LT_COMPILER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -m4_defun([_LT_LINKER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* -])# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# ------------------------- -m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ - case $host_os in - rhapsody* | darwin*) - AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) - AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) - AC_CHECK_TOOL([LIPO], [lipo], [:]) - AC_CHECK_TOOL([OTOOL], [otool], [:]) - AC_CHECK_TOOL([OTOOL64], [otool64], [:]) - _LT_DECL([], [DSYMUTIL], [1], - [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) - _LT_DECL([], [NMEDIT], [1], - [Tool to change global to local symbols on Mac OS X]) - _LT_DECL([], [LIPO], [1], - [Tool to manipulate fat objects and archives on Mac OS X]) - _LT_DECL([], [OTOOL], [1], - [ldd/readelf like tool for Mach-O binaries on Mac OS X]) - _LT_DECL([], [OTOOL64], [1], - [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) - - AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], - [lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi]) - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" - ]) - case $host_os in - rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac -]) - - -# _LT_DARWIN_LINKER_FEATURES -# -------------------------- -# Checks for linker and compiler features on darwin -m4_defun([_LT_DARWIN_LINKER_FEATURES], -[ - m4_require([_LT_REQUIRED_DARWIN_CHECKS]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" - if test "$GCC" = "yes"; then - output_verbose_link_cmd=echo - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - m4_if([$1], [CXX], -[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi -],[]) - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -]) - -# _LT_SYS_MODULE_PATH_AIX -# ----------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -m4_defun([_LT_SYS_MODULE_PATH_AIX], -[m4_require([_LT_DECL_SED])dnl -AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_SYS_MODULE_PATH_AIX - - -# _LT_SHELL_INIT(ARG) -# ------------------- -m4_define([_LT_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_SHELL_INIT - - -# _LT_PROG_ECHO_BACKSLASH -# ----------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -m4_defun([_LT_PROG_ECHO_BACKSLASH], -[_LT_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$lt_ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -ECHO=${lt_ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<_LT_EOF -[$]* -_LT_EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test -z "$lt_ECHO"; then - if test "X${echo_test_string+set}" != Xset; then - # find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if { echo_test_string=`eval $cmd`; } 2>/dev/null && - { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null - then - break - fi - done - fi - - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : - else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$ECHO" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - ECHO='print -r' - elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - ECHO='printf %s\n' - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - ECHO="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - ECHO=echo - fi - fi - fi - fi - fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -lt_ECHO=$ECHO -if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(lt_ECHO) -]) -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], - [An echo program that does not interpret backslashes]) -])# _LT_PROG_ECHO_BACKSLASH - - -# _LT_ENABLE_LOCK -# --------------- -m4_defun([_LT_ENABLE_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AS_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" -])# _LT_ENABLE_LOCK - - -# _LT_CMD_OLD_ARCHIVE -# ------------------- -m4_defun([_LT_CMD_OLD_ARCHIVE], -[AC_CHECK_TOOL(AR, ar, false) -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1]) - -AC_CHECK_TOOL(STRIP, strip, :) -test -z "$STRIP" && STRIP=: -_LT_DECL([], [STRIP], [1], [A symbol stripping program]) - -AC_CHECK_TOOL(RANLIB, ranlib, :) -test -z "$RANLIB" && RANLIB=: -_LT_DECL([], [RANLIB], [1], - [Commands used to install an old-style archive]) - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi -_LT_DECL([], [old_postinstall_cmds], [2]) -_LT_DECL([], [old_postuninstall_cmds], [2]) -_LT_TAGDECL([], [old_archive_cmds], [2], - [Commands used to build an old-style archive]) -])# _LT_CMD_OLD_ARCHIVE - - -# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([_LT_COMPILER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $RM conftest* -]) - -if test x"[$]$2" = xyes; then - m4_if([$5], , :, [$5]) -else - m4_if([$6], , :, [$6]) -fi -])# _LT_COMPILER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) - - -# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------- -# Check whether the given linker option works -AC_DEFUN([_LT_LINKER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - m4_if([$4], , :, [$4]) -else - m4_if([$5], , :, [$5]) -fi -])# _LT_LINKER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) - - -# LT_CMD_MAX_LEN -#--------------- -AC_DEFUN([LT_CMD_MAX_LEN], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ - = "XX$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -max_cmd_len=$lt_cv_sys_max_cmd_len -_LT_DECL([], [max_cmd_len], [0], - [What is the maximum length of a command?]) -])# LT_CMD_MAX_LEN - -# Old name: -AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - - -# _LT_HEADER_DLFCN -# ---------------- -m4_defun([_LT_HEADER_DLFCN], -[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -])# _LT_HEADER_DLFCN - - -# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ---------------------------------------------------------------- -m4_defun([_LT_TRY_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -[#line __oline__ "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - exit (status); -}] -_LT_EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_TRY_DLOPEN_SELF - - -# LT_SYS_DLOPEN_SELF -# ------------------ -AC_DEFUN([LT_SYS_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -_LT_DECL([dlopen_support], [enable_dlopen], [0], - [Whether dlopen is supported]) -_LT_DECL([dlopen_self], [enable_dlopen_self], [0], - [Whether dlopen of programs is supported]) -_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], - [Whether dlopen of statically linked programs is supported]) -])# LT_SYS_DLOPEN_SELF - -# Old name: -AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - - -# _LT_COMPILER_C_O([TAGNAME]) -# --------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler. -# This macro does not hard code the compiler like AC_PROG_CC_C_O. -m4_defun([_LT_COMPILER_C_O], -[m4_require([_LT_DECL_SED])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -]) -_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], - [Does compiler simultaneously support -c and -o options?]) -])# _LT_COMPILER_C_O - - -# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -# ---------------------------------- -# Check to see if we can do hard links to lock some files if needed -m4_defun([_LT_COMPILER_FILE_LOCKS], -[m4_require([_LT_ENABLE_LOCK])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_COMPILER_C_O([$1]) - -hard_links="nottested" -if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -])# _LT_COMPILER_FILE_LOCKS - - -# _LT_CHECK_OBJDIR -# ---------------- -m4_defun([_LT_CHECK_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -_LT_DECL([], [objdir], [0], - [The name of the directory that contains temporary libtool files])dnl -m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", - [Define to the sub-directory in which libtool stores uninstalled libraries.]) -])# _LT_CHECK_OBJDIR - - -# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -# -------------------------------------- -# Check hardcoding attributes. -m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || - test -n "$_LT_TAGVAR(runpath_var, $1)" || - test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || - test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -_LT_TAGDECL([], [hardcode_action], [0], - [How to hardcode a shared library path into an executable]) -])# _LT_LINKER_HARDCODE_LIBPATH - - -# _LT_CMD_STRIPLIB -# ---------------- -m4_defun([_LT_CMD_STRIPLIB], -[m4_require([_LT_DECL_EGREP]) -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -_LT_DECL([], [striplib], [1]) -])# _LT_CMD_STRIPLIB - - -# _LT_SYS_DYNAMIC_LINKER([TAG]) -# ----------------------------- -# PORTME Fill in your ld.so characteristics -m4_defun([_LT_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -m4_if([$1], - [], [ -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[[4-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[123]]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[[3-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux - need_lib_prefix=no - need_version=no - library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - -_LT_DECL([], [variables_saved_for_relink], [1], - [Variables whose values should be saved in libtool wrapper scripts and - restored at link time]) -_LT_DECL([], [need_lib_prefix], [0], - [Do we need the "lib" prefix for modules?]) -_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -_LT_DECL([], [version_type], [0], [Library versioning type]) -_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -_LT_DECL([], [shlibpath_overrides_runpath], [0], - [Is shlibpath searched before the hard-coded library search path?]) -_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -_LT_DECL([], [library_names_spec], [1], - [[List of archive names. First name is the real one, the rest are links. - The last name is the one that the linker finds with -lNAME]]) -_LT_DECL([], [soname_spec], [1], - [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [postinstall_cmds], [2], - [Command to use after installation of a shared archive]) -_LT_DECL([], [postuninstall_cmds], [2], - [Command to use after uninstallation of a shared archive]) -_LT_DECL([], [finish_cmds], [2], - [Commands used to finish a libtool library installation in a directory]) -_LT_DECL([], [finish_eval], [1], - [[As "finish_cmds", except a single script fragment to be evaled but - not shown]]) -_LT_DECL([], [hardcode_into_libs], [0], - [Whether we should hardcode library paths into libraries]) -_LT_DECL([], [sys_lib_search_path_spec], [2], - [Compile-time system search path for libraries]) -_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], - [Run-time system search path for libraries]) -])# _LT_SYS_DYNAMIC_LINKER - - -# _LT_PATH_TOOL_PREFIX(TOOL) -# -------------------------- -# find a file program which can recognize shared library -AC_DEFUN([_LT_PATH_TOOL_PREFIX], -[m4_require([_LT_DECL_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="m4_if([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -_LT_DECL([], [MAGIC_CMD], [0], - [Used to examine libraries when file_magic_cmd begins with "file"])dnl -])# _LT_PATH_TOOL_PREFIX - -# Old name: -AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) - - -# _LT_PATH_MAGIC -# -------------- -# find a file program which can recognize a shared library -m4_defun([_LT_PATH_MAGIC], -[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# _LT_PATH_MAGIC - - -# LT_PATH_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([LT_PATH_LD], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -_LT_DECL([], [deplibs_check_method], [1], - [Method to check whether dependent libraries are shared objects]) -_LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method == "file_magic"]) -])# _LT_CHECK_MAGIC_METHOD - - -# LT_PATH_NM -# ---------- -# find the pathname to a BSD- or MS-compatible name lister -AC_DEFUN([LT_PATH_NM], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi]) -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) - AC_SUBST([DUMPBIN]) - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm -AC_SUBST([NM]) -_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - -AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest*]) -])# LT_PATH_NM - -# Old names: -AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_NM], []) -dnl AC_DEFUN([AC_PROG_NM], []) - - -# LT_LIB_M -# -------- -# check for math library -AC_DEFUN([LT_LIB_M], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -AC_SUBST([LIBM]) -])# LT_LIB_M - -# Old name: -AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_CHECK_LIBM], []) - - -# _LT_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------- -m4_defun([_LT_COMPILER_NO_RTTI], -[m4_require([_LT_TAG_COMPILER])dnl - -_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], - [Compiler flag to turn off builtin functions]) -])# _LT_COMPILER_NO_RTTI - - -# _LT_CMD_GLOBAL_SYMBOLS -# ---------------------- -m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_NM])dnl -AC_REQUIRE([LT_PATH_LD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_TAG_COMPILER])dnl - -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK ['"\ -" {last_section=section; section=\$ 3};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx]" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[[]] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi - -_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], - [Take the output of nm and produce a listing of raw symbols and C names]) -_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], - [Transform the output of nm in a proper C declaration]) -_LT_DECL([global_symbol_to_c_name_address], - [lt_cv_sys_global_symbol_to_c_name_address], [1], - [Transform the output of nm in a C name address pair]) -_LT_DECL([global_symbol_to_c_name_address_lib_prefix], - [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], - [Transform the output of nm in a C name address pair when lib prefix is needed]) -]) # _LT_CMD_GLOBAL_SYMBOLS - - -# _LT_COMPILER_PIC([TAGNAME]) -# --------------------------- -m4_defun([_LT_COMPILER_PIC], -[m4_require([_LT_TAG_COMPILER])dnl -_LT_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) -m4_if([$1], [CXX], [ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix[[4-9]]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - icpc* | ecpc* ) - # Intel C++ - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xlc* | xlC*) - # IBM XL 8.0 on PPC - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd* | netbsdelf*-gnu) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - hpux9* | hpux10* | hpux11*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc* | ifort*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xl*) - # IBM XL C 8.0/Fortran 10.1 on PPC - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - esac - ;; - esac - ;; - - newsos6) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" - ;; -esac -AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], - [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], - [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], - [Additional compiler flags for building library objects]) - -# -# Check to make sure the static flag actually works. -# -wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], - [Compiler flag to prevent dynamic linking]) -])# _LT_COMPILER_PIC - - -# _LT_LINKER_SHLIBS([TAGNAME]) -# ---------------------------- -# See if the linker supports building shared libraries. -m4_defun([_LT_LINKER_SHLIBS], -[AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -m4_if([$1], [CXX], [ - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw*) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - ;; - linux* | k*bsd*-gnu) - _LT_TAGVAR(link_all_deplibs, $1)=no - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] -], [ - runpath_var= - _LT_TAGVAR(allow_undefined_flag, $1)= - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(archive_cmds, $1)= - _LT_TAGVAR(archive_expsym_cmds, $1)= - _LT_TAGVAR(compiler_needs_object, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(hardcode_automatic, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(inherit_rpath, $1)=no - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(module_cmds, $1)= - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(old_archive_from_new_cmds, $1)= - _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_TAGVAR(thread_safe_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. -dnl Note also adjust exclude_expsyms for C++ above. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[[3-9]]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag= - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - _LT_TAGVAR(link_all_deplibs, $1)=no - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - bsdi[[45]]*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - AC_LINK_IFELSE(int foo(void) {}, - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - ) - LDFLAGS="$save_LDFLAGS" - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' - ;; - esac - fi - fi -]) -AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld - -_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -_LT_DECL([], [extract_expsyms_cmds], [2], - [The commands to extract the exported symbol list from a shared archive]) - -# -# Do we need to explicitly link libc? -# -case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac - fi - ;; -esac - -_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], - [Whether or not to add -lc for building shared libraries]) -_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], - [enable_shared_with_static_runtimes], [0], - [Whether or not to disallow shared libs when runtime libs are static]) -_LT_TAGDECL([], [export_dynamic_flag_spec], [1], - [Compiler flag to allow reflexive dlopens]) -_LT_TAGDECL([], [whole_archive_flag_spec], [1], - [Compiler flag to generate shared objects directly from archives]) -_LT_TAGDECL([], [compiler_needs_object], [1], - [Whether the compiler copes with passing no objects directly]) -_LT_TAGDECL([], [old_archive_from_new_cmds], [2], - [Create an old-style archive from a shared archive]) -_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], - [Create a temporary old-style archive to link instead of a shared archive]) -_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -_LT_TAGDECL([], [archive_expsym_cmds], [2]) -_LT_TAGDECL([], [module_cmds], [2], - [Commands used to build a loadable module if different from building - a shared archive.]) -_LT_TAGDECL([], [module_expsym_cmds], [2]) -_LT_TAGDECL([], [with_gnu_ld], [1], - [Whether we are building with GNU ld or not]) -_LT_TAGDECL([], [allow_undefined_flag], [1], - [Flag that allows shared libraries with undefined symbols to be built]) -_LT_TAGDECL([], [no_undefined_flag], [1], - [Flag that enforces no undefined symbols]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], - [Flag to hardcode $libdir into a binary during linking. - This must work even if $libdir does not exist]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], - [[If ld is used when linking, flag to hardcode $libdir into a binary - during linking. This must work even if $libdir does not exist]]) -_LT_TAGDECL([], [hardcode_libdir_separator], [1], - [Whether we need a single "-rpath" flag with a separated argument]) -_LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary]) -_LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting ${shlibpath_var} if the - library is relocated]) -_LT_TAGDECL([], [hardcode_minus_L], [0], - [Set to "yes" if using the -LDIR flag during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_shlibpath_var], [0], - [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_automatic], [0], - [Set to "yes" if building a shared library automatically hardcodes DIR - into the library and all subsequent libraries and executables linked - against it]) -_LT_TAGDECL([], [inherit_rpath], [0], - [Set to yes if linker adds runtime paths of dependent libraries - to runtime path list]) -_LT_TAGDECL([], [link_all_deplibs], [0], - [Whether libtool must link a program against all its dependency libraries]) -_LT_TAGDECL([], [fix_srcfile_path], [1], - [Fix the shell variable $srcfile for the compiler]) -_LT_TAGDECL([], [always_export_symbols], [0], - [Set to "yes" if exported symbols are required]) -_LT_TAGDECL([], [export_symbols_cmds], [2], - [The commands to list exported symbols]) -_LT_TAGDECL([], [exclude_expsyms], [1], - [Symbols that should not be listed in the preloaded symbols]) -_LT_TAGDECL([], [include_expsyms], [1], - [Symbols that must always be exported]) -_LT_TAGDECL([], [prelink_cmds], [2], - [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [file_list_spec], [1], - [Specify filename containing input files]) -dnl FIXME: Not yet implemented -dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -dnl [Compiler flag to generate thread safe objects]) -])# _LT_LINKER_SHLIBS - - -# _LT_LANG_C_CONFIG([TAG]) -# ------------------------ -# Ensure that the configuration variables for a C compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_C_CONFIG], -[m4_require([_LT_DECL_EGREP])dnl -lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_TAG_COMPILER -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - LT_SYS_DLOPEN_SELF - _LT_CMD_STRIPLIB - - # Report which library types will actually be built - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_CONFIG($1) -fi -AC_LANG_POP -CC="$lt_save_CC" -])# _LT_LANG_C_CONFIG - - -# _LT_PROG_CXX -# ------------ -# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ -# compiler, we have our own version here. -m4_defun([_LT_PROG_CXX], -[ -pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) -AC_PROG_CXX -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP -else - _lt_caught_CXX_error=yes -fi -popdef([AC_MSG_ERROR]) -])# _LT_PROG_CXX - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([_LT_PROG_CXX], []) - - -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[AC_REQUIRE([_LT_PROG_CXX])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl - -AC_LANG_PUSH(C++) -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(compiler_needs_object, $1)=no -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the CXX compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="int some_variable = 0;" - - # Code to be used in simple link tests - lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX - lt_save_with_gnu_ld=$with_gnu_ld - lt_save_path_LD=$lt_cv_path_LD - if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx - else - $as_unset lt_cv_prog_gnu_ld - fi - if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX - else - $as_unset lt_cv_path_LD - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - # We don't want -fno-exception when compiling C++ code, so set the - # no_builtin_flag separately - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - else - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - fi - - if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - LT_PATH_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | - $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - - else - GXX=no - with_gnu_ld=no - wlarc= - fi - - # PORTME: fill in a description of your system's C++ link characteristics - AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - _LT_TAGVAR(ld_shlibs, $1)=yes - case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to - # export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty - # executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - freebsd[[12]]*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - freebsd-elf*) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - gnu*) - ;; - - hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - *) - if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' - fi - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc* | ecpc* ) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in - *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) - _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' - _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ - $RANLIB $oldlib' - _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - *) # Version 6 will use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - xl*) - # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - - lynxos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - m88k*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - - *nto* | *qnx*) - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - openbsd2*) - # C++ shared libraries are fairly broken - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd=echo - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - case $host in - osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - esac - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - case $host in - osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - ;; - *) - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - case $host in - osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - psos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - fi - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - vxworks*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - - _LT_TAGVAR(GCC, $1)="$GXX" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - CC=$lt_save_CC - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC - with_gnu_ld=$lt_save_with_gnu_ld - lt_cv_path_LDCXX=$lt_cv_path_LD - lt_cv_path_LD=$lt_save_path_LD - lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld - lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes - -AC_LANG_POP -])# _LT_LANG_CXX_CONFIG - - -# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -# --------------------------------- -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -# Dependencies to place before and after the object being linked: -_LT_TAGVAR(predep_objects, $1)= -_LT_TAGVAR(postdep_objects, $1)= -_LT_TAGVAR(predeps, $1)= -_LT_TAGVAR(postdeps, $1)= -_LT_TAGVAR(compiler_lib_search_path, $1)= - -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -int a; -void foo (void) { a = 0; } -_LT_EOF -], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -_LT_EOF -], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer*4 a - a=0 - return - end -_LT_EOF -], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer a - a=0 - return - end -_LT_EOF -], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -public class foo { - private int a; - public void bar (void) { - a = 0; - } -}; -_LT_EOF -]) -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do - case $p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" || - test $p = "-R"; then - prev=$p - continue - else - prev= - fi - - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" - else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)="${prev}${p}" - else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" - fi - fi - ;; - - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)="$p" - else - _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)="$p" - else - _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$RM -f confest.$objext - -# PORTME: override above test on systems where it is broken -m4_if([$1], [CXX], -[case $host_os in -interix[[3-9]]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - _LT_TAGVAR(predep_objects,$1)= - _LT_TAGVAR(postdep_objects,$1)= - _LT_TAGVAR(postdeps,$1)= - ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -esac -]) - -case " $_LT_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac - _LT_TAGVAR(compiler_lib_search_dirs, $1)= -if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi -_LT_TAGDECL([], [compiler_lib_search_dirs], [1], - [The directories searched by this compiler when creating a shared library]) -_LT_TAGDECL([], [predep_objects], [1], - [Dependencies to place before and after the objects being linked to - create a shared library]) -_LT_TAGDECL([], [postdep_objects], [1]) -_LT_TAGDECL([], [predeps], [1]) -_LT_TAGDECL([], [postdeps], [1]) -_LT_TAGDECL([], [compiler_lib_search_path], [1], - [The library search path used internally by the compiler when linking - a shared library]) -])# _LT_SYS_HIDDEN_LIBDEPS - - -# _LT_PROG_F77 -# ------------ -# Since AC_PROG_F77 is broken, in that it returns the empty string -# if there is no fortran compiler, we have our own version here. -m4_defun([_LT_PROG_F77], -[ -pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) -AC_PROG_F77 -if test -z "$F77" || test "X$F77" = "Xno"; then - _lt_disable_F77=yes -fi -popdef([AC_MSG_ERROR]) -])# _LT_PROG_F77 - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([_LT_PROG_F77], []) - - -# _LT_LANG_F77_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a Fortran 77 compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_F77_CONFIG], -[AC_REQUIRE([_LT_PROG_F77])dnl -AC_LANG_PUSH(Fortran 77) - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the F77 compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_F77" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - CC=${F77-"f77"} - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - GCC=$G77 - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$G77" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC="$lt_save_CC" -fi # test "$_lt_disable_F77" != yes - -AC_LANG_POP -])# _LT_LANG_F77_CONFIG - - -# _LT_PROG_FC -# ----------- -# Since AC_PROG_FC is broken, in that it returns the empty string -# if there is no fortran compiler, we have our own version here. -m4_defun([_LT_PROG_FC], -[ -pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) -AC_PROG_FC -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi -popdef([AC_MSG_ERROR]) -])# _LT_PROG_FC - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([_LT_PROG_FC], []) - - -# _LT_LANG_FC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for a Fortran compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_FC_CONFIG], -[AC_REQUIRE([_LT_PROG_FC])dnl -AC_LANG_PUSH(Fortran) - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for fc test sources. -ac_ext=${ac_fc_srcext-f} - -# Object file extension for compiled fc test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the FC compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_FC" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - CC=${FC-"f95"} - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC="$lt_save_CC" -fi # test "$_lt_disable_FC" != yes - -AC_LANG_POP -])# _LT_LANG_FC_CONFIG - - -# _LT_LANG_GCJ_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Java Compiler compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_GCJ_CONFIG], -[AC_REQUIRE([LT_PROG_GCJ])dnl -AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -lt_save_GCC=$GCC -GCC=yes -CC=${GCJ-"gcj"} -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC="$lt_save_CC" -])# _LT_LANG_GCJ_CONFIG - - -# _LT_LANG_RC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for the Windows resource compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_RC_CONFIG], -[AC_REQUIRE([LT_PROG_RC])dnl -AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -lt_save_GCC=$GCC -GCC= -CC=${RC-"windres"} -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -if test -n "$compiler"; then - : - _LT_CONFIG($1) -fi - -GCC=$lt_save_GCC -AC_LANG_RESTORE -CC="$lt_save_CC" -])# _LT_LANG_RC_CONFIG - - -# LT_PROG_GCJ -# ----------- -AC_DEFUN([LT_PROG_GCJ], -[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], - [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], - [AC_CHECK_TOOL(GCJ, gcj,) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS)])])[]dnl -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - - -# LT_PROG_RC -# ---------- -AC_DEFUN([LT_PROG_RC], -[AC_CHECK_TOOL(RC, windres,) -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_RC], []) - - -# _LT_DECL_EGREP -# -------------- -# If we don't have a new enough Autoconf to choose the best grep -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_EGREP], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_REQUIRE([AC_PROG_FGREP])dnl -test -z "$GREP" && GREP=grep -_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -_LT_DECL([], [EGREP], [1], [An ERE matcher]) -_LT_DECL([], [FGREP], [1], [A literal string matcher]) -dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -AC_SUBST([GREP]) -]) - - -# _LT_DECL_SED -# ------------ -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -m4_defun([_LT_DECL_SED], -[AC_PROG_SED -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" -_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], - [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -])# _LT_DECL_SED - -m4_ifndef([AC_PROG_SED], [ -############################################################ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -############################################################ - -m4_defun([AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -])#AC_PROG_SED -])#m4_ifndef - -# Old name: -AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_SED], []) - - -# _LT_CHECK_SHELL_FEATURES -# ------------------------ -# Find out whether the shell is Bourne or XSI compatible, -# or has some other useful features. -m4_defun([_LT_CHECK_SHELL_FEATURES], -[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -AC_MSG_RESULT([$xsi_shell]) -_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) - -AC_MSG_CHECKING([whether the shell understands "+="]) -lt_shell_append=no -( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -AC_MSG_RESULT([$lt_shell_append]) -_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi -_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac -_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -])# _LT_CHECK_SHELL_FEATURES - - -# _LT_PROG_XSI_SHELLFNS -# --------------------- -# Bourne and XSI compatible variants of some useful shell functions. -m4_defun([_LT_PROG_XSI_SHELLFNS], -[case $xsi_shell in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac -} - -# func_basename file -func_basename () -{ - func_basename_result="${1##*/}" -} - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}" -} - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -func_stripname () -{ - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"} -} - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=${1%%=*} - func_opt_split_arg=${1#*=} -} - -# func_lo2o object -func_lo2o () -{ - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=${1%.*}.lo -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=$(( $[*] )) -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=${#1} -} - -_LT_EOF - ;; - *) # Bourne compatible functions. - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - -dnl func_dirname_and_basename -dnl A portable version of this function is already defined in general.m4sh -dnl so there is no need for it here. - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; - esac -} - -# sed scripts: -my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' -my_sed_long_arg='1s/^-[[^=]]*=//' - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` - func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -} - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=`expr "$[@]"` -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` -} - -_LT_EOF -esac - -case $lt_shell_append in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$[1]+=\$[2]" -} -_LT_EOF - ;; - *) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$[1]=\$$[1]\$[2]" -} - -_LT_EOF - ;; - esac -]) diff -Nru tint2-0.7.1/m4/lt~obsolete.m4 tint2-0.9/m4/lt~obsolete.m4 --- tint2-0.7.1/m4/lt~obsolete.m4 2008-09-01 18:32:11.000000000 +0100 +++ tint2-0.9/m4/lt~obsolete.m4 1970-01-01 01:00:00.000000000 +0100 @@ -1,92 +0,0 @@ -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 4 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) - -m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) -m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) diff -Nru tint2-0.7.1/m4/ltoptions.m4 tint2-0.9/m4/ltoptions.m4 --- tint2-0.7.1/m4/ltoptions.m4 2008-09-01 18:32:11.000000000 +0100 +++ tint2-0.9/m4/ltoptions.m4 1970-01-01 01:00:00.000000000 +0100 @@ -1,368 +0,0 @@ -# Helper functions for option handling. -*- Autoconf -*- -# -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltoptions.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - - -# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -# ------------------------------------------ -m4_define([_LT_MANGLE_OPTION], -[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) - - -# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -# --------------------------------------- -# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -# matching handler defined, dispatch to it. Other OPTION-NAMEs are -# saved as a flag. -m4_define([_LT_SET_OPTION], -[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), - _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option `$2'])])[]dnl -]) - - -# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -# ------------------------------------------------------------ -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -m4_define([_LT_IF_OPTION], -[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - - -# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -# ------------------------------------------------------- -# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -# are set. -m4_define([_LT_UNLESS_OPTIONS], -[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), - [m4_define([$0_found])])])[]dnl -m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -])[]dnl -]) - - -# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -# ---------------------------------------- -# OPTION-LIST is a space-separated list of Libtool options associated -# with MACRO-NAME. If any OPTION has a matching handler declared with -# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -# the unknown option and exit. -m4_defun([_LT_SET_OPTIONS], -[# Set options -m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [_LT_SET_OPTION([$1], _LT_Option)]) - -m4_if([$1],[LT_INIT],[ - dnl - dnl Simply set some default values (i.e off) if boolean options were not - dnl specified: - _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no - ]) - _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no - ]) - dnl - dnl If no reference was made to various pairs of opposing options, then - dnl we run the default mode handler for the pair. For example, if neither - dnl `shared' nor `disable-shared' was passed, we enable building of shared - dnl archives by default: - _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) - _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) - ]) -])# _LT_SET_OPTIONS - - -## --------------------------------- ## -## Macros to handle LT_INIT options. ## -## --------------------------------- ## - -# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -# ----------------------------------------- -m4_define([_LT_MANGLE_DEFUN], -[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) - - -# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -# ----------------------------------------------- -m4_define([LT_OPTION_DEFINE], -[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -])# LT_OPTION_DEFINE - - -# dlopen -# ------ -LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -]) - -AU_DEFUN([AC_LIBTOOL_DLOPEN], -[_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - - -# win32-dll -# --------- -# Declare package support for building win32 dll's. -LT_OPTION_DEFINE([LT_INIT], [win32-dll], -[enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -esac - -test -z "$AS" && AS=as -_LT_DECL([], [AS], [0], [Assembler program])dnl - -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl - -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl -])# win32-dll - -AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - - -# _LT_ENABLE_SHARED([DEFAULT]) -# ---------------------------- -# implement the --enable-shared flag, and supports the `shared' and -# `disable-shared' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_SHARED], -[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([shared], - [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - - _LT_DECL([build_libtool_libs], [enable_shared], [0], - [Whether or not to build shared libraries]) -])# _LT_ENABLE_SHARED - -LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -]) - -AC_DEFUN([AC_DISABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], [disable-shared]) -]) - -AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_SHARED], []) -dnl AC_DEFUN([AM_DISABLE_SHARED], []) - - - -# _LT_ENABLE_STATIC([DEFAULT]) -# ---------------------------- -# implement the --enable-static flag, and support the `static' and -# `disable-static' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_STATIC], -[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([static], - [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - - _LT_DECL([build_old_libs], [enable_static], [0], - [Whether or not to build static libraries]) -])# _LT_ENABLE_STATIC - -LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -]) - -AC_DEFUN([AC_DISABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], [disable-static]) -]) - -AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_STATIC], []) -dnl AC_DEFUN([AM_DISABLE_STATIC], []) - - - -# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -# ---------------------------------- -# implement the --enable-fast-install flag, and support the `fast-install' -# and `disable-fast-install' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_FAST_INSTALL], -[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([fast-install], - [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) - -_LT_DECL([fast_install], [enable_fast_install], [0], - [Whether or not to optimize for fast installation])dnl -])# _LT_ENABLE_FAST_INSTALL - -LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) - -# Old names: -AU_DEFUN([AC_ENABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) -]) - -AU_DEFUN([AC_DISABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - - -# _LT_WITH_PIC([MODE]) -# -------------------- -# implement the --with-pic flag, and support the `pic-only' and `no-pic' -# LT_INIT options. -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -m4_define([_LT_WITH_PIC], -[AC_ARG_WITH([pic], - [AS_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) - -test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) - -_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -])# _LT_WITH_PIC - -LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - -# Old name: -AU_DEFUN([AC_LIBTOOL_PICMODE], -[_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - -## ----------------- ## -## LTDL_INIT Options ## -## ----------------- ## - -m4_define([_LTDL_MODE], []) -LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], - [m4_define([_LTDL_MODE], [nonrecursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [recursive], - [m4_define([_LTDL_MODE], [recursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [subproject], - [m4_define([_LTDL_MODE], [subproject])]) - -m4_define([_LTDL_TYPE], []) -LT_OPTION_DEFINE([LTDL_INIT], [installable], - [m4_define([_LTDL_TYPE], [installable])]) -LT_OPTION_DEFINE([LTDL_INIT], [convenience], - [m4_define([_LTDL_TYPE], [convenience])]) diff -Nru tint2-0.7.1/m4/ltsugar.m4 tint2-0.9/m4/ltsugar.m4 --- tint2-0.7.1/m4/ltsugar.m4 2008-09-01 18:32:11.000000000 +0100 +++ tint2-0.9/m4/ltsugar.m4 1970-01-01 01:00:00.000000000 +0100 @@ -1,123 +0,0 @@ -# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 5 ltsugar.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - - -# lt_join(SEP, ARG1, [ARG2...]) -# ----------------------------- -# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -# associated separator. -# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -# versions in m4sugar had bugs. -m4_define([lt_join], -[m4_if([$#], [1], [], - [$#], [2], [[$2]], - [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -m4_define([_lt_join], -[m4_if([$#$2], [2], [], - [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) - - -# lt_car(LIST) -# lt_cdr(LIST) -# ------------ -# Manipulate m4 lists. -# These macros are necessary as long as will still need to support -# Autoconf-2.59 which quotes differently. -m4_define([lt_car], [[$1]]) -m4_define([lt_cdr], -[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], - [$#], 1, [], - [m4_dquote(m4_shift($@))])]) -m4_define([lt_unquote], $1) - - -# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -# ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. -# Note that neither SEPARATOR nor STRING are expanded; they are appended -# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -# No SEPARATOR is output if MACRO-NAME was previously undefined (different -# than defined and empty). -# -# This macro is needed until we can rely on Autoconf 2.62, since earlier -# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -m4_define([lt_append], -[m4_define([$1], - m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - - - -# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -# ---------------------------------------------------------- -# Produce a SEP delimited list of all paired combinations of elements of -# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -# has the form PREFIXmINFIXSUFFIXn. -m4_define([lt_combine], -[m4_if([$2], [], [], - [m4_if([$4], [], [], - [lt_join(m4_quote(m4_default([$1], [[, ]])), - lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_prefix, [$2], - [m4_foreach(_Lt_suffix, lt_car([m4_shiftn(3, $@)]), - [_Lt_prefix[]$3[]_Lt_suffix ])])))))])])dnl -]) - - -# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -# ----------------------------------------------------------------------- -# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -m4_define([lt_if_append_uniq], -[m4_ifdef([$1], - [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], - [lt_append([$1], [$2], [$3])$4], - [$5])], - [lt_append([$1], [$2], [$3])$4])]) - - -# lt_dict_add(DICT, KEY, VALUE) -# ----------------------------- -m4_define([lt_dict_add], -[m4_define([$1($2)], [$3])]) - - -# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -# -------------------------------------------- -m4_define([lt_dict_add_subkey], -[m4_define([$1($2:$3)], [$4])]) - - -# lt_dict_fetch(DICT, KEY, [SUBKEY]) -# ---------------------------------- -m4_define([lt_dict_fetch], -[m4_ifval([$3], - m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), - m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) - - -# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -# ----------------------------------------------------------------- -m4_define([lt_if_dict_fetch], -[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], - [$5], - [$6])]) - - -# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -# -------------------------------------------------------------- -m4_define([lt_dict_filter], -[m4_if([$5], [], [], - [lt_join(m4_quote(m4_default([$4], [[, ]])), - lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), - [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl -]) diff -Nru tint2-0.7.1/m4/ltversion.m4 tint2-0.9/m4/ltversion.m4 --- tint2-0.7.1/m4/ltversion.m4 2008-09-01 18:32:11.000000000 +0100 +++ tint2-0.9/m4/ltversion.m4 1970-01-01 01:00:00.000000000 +0100 @@ -1,23 +0,0 @@ -# ltversion.m4 -- version numbers -*- Autoconf -*- -# -# Copyright (C) 2004 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# Generated from ltversion.in. - -# serial 2976 ltversion.m4 -# This file is part of GNU Libtool - -m4_define([LT_PACKAGE_VERSION], [2.2.4]) -m4_define([LT_PACKAGE_REVISION], [1.2976]) - -AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.2.4' -macro_revision='1.2976' -_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -_LT_DECL(, macro_revision, 0) -]) diff -Nru tint2-0.7.1/Makefile.am tint2-0.9/Makefile.am --- tint2-0.7.1/Makefile.am 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/Makefile.am 2009-10-25 09:53:21.000000000 +0000 @@ -1,22 +1,12 @@ -rcdir = $(sysconfdir)/xdg/$(PACKAGE_NAME) - ACLOCAL_AMFLAGS = -I m4 -SUBDIRS = doc src +SUBDIRS = doc sample src dist_doc_DATA = AUTHORS ChangeLog NEWS README EXTRA_DIST = autogen.sh README.source -dist_rc_DATA = tint2rc - -if INSTALL_EXAMPLES -examplesdir = $(docdir)/examples -dist_examples_DATA = tintrc01 tintrc02 tintrc03 tintrc04 tintrc05 tintrc06 -else -examplesdir = -dist_examples_DATA = -endif +dist_pkgdata_DATA = default_icon.png -DISTCLEANFILES = configure depcomp config.guess config.sub config.h.in config.h.in~ ltmain.sh missing aclocal.m4 install-sh Makefile.in INSTALL +DISTCLEANFILES += configure depcomp config.guess config.sub config.h.in config.h.in~ ltmain.sh missing aclocal.m4 install-sh INSTALL dist-hook: find $(distdir)/ -type d -name '.svn' -exec rm -rf {} ';' diff -Nru tint2-0.7.1/Makefile.in tint2-0.9/Makefile.in --- tint2-0.7.1/Makefile.in 2009-07-22 17:47:17.000000000 +0100 +++ tint2-0.9/Makefile.in 2010-01-28 11:16:45.000000000 +0000 @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,8 +17,9 @@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -30,20 +32,14 @@ NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ subdir = . -DIST_COMMON = README $(am__configure_deps) \ - $(am__dist_examples_DATA_DIST) $(dist_doc_DATA) \ - $(dist_rc_DATA) $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(srcdir)/config.h.in $(top_srcdir)/configure AUTHORS COPYING \ - ChangeLog INSTALL NEWS config.guess config.sub depcomp \ - install-sh ltmain.sh missing +DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \ + $(dist_pkgdata_DATA) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + depcomp install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ @@ -51,6 +47,7 @@ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ @@ -65,17 +62,29 @@ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; -am__installdirs = "$(DESTDIR)$(docdir)" "$(DESTDIR)$(examplesdir)" \ - "$(DESTDIR)$(rcdir)" -dist_docDATA_INSTALL = $(INSTALL_DATA) -am__dist_examples_DATA_DIST = tintrc01 tintrc02 tintrc03 tintrc04 \ - tintrc05 tintrc06 -dist_examplesDATA_INSTALL = $(INSTALL_DATA) -dist_rcDATA_INSTALL = $(INSTALL_DATA) -DATA = $(dist_doc_DATA) $(dist_examples_DATA) $(dist_rc_DATA) +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgdatadir)" +DATA = $(dist_doc_DATA) $(dist_pkgdata_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) @@ -83,16 +92,42 @@ distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } + { test ! -d "$(distdir)" \ + || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr "$(distdir)"; }; } +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ -AR = @AR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_LDFLAGS = @AM_LDFLAGS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -107,14 +142,14 @@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ +DISTCLEANFILES = @DISTCLEANFILES@ configure depcomp config.guess \ + config.sub config.h.in config.h.in~ ltmain.sh missing \ + aclocal.m4 install-sh INSTALL ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -FGREP = @FGREP@ GLIB2_CFLAGS = @GLIB2_CFLAGS@ GLIB2_LIBS = @GLIB2_LIBS@ GOBJECT2_CFLAGS = @GOBJECT2_CFLAGS@ @@ -127,26 +162,19 @@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGOCAIRO_CFLAGS = @PANGOCAIRO_CFLAGS@ PANGOCAIRO_LIBS = @PANGOCAIRO_LIBS@ @@ -154,45 +182,37 @@ PANGO_LIBS = @PANGO_LIBS@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ -RANLIB = @RANLIB@ -SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ +TINT2CONF_CFLAGS = @TINT2CONF_CFLAGS@ +TINT2CONF_LIBS = @TINT2CONF_LIBS@ VERSION = @VERSION@ X11_CFLAGS = @X11_CFLAGS@ X11_LIBS = @X11_LIBS@ XINERAMA_CFLAGS = @XINERAMA_CFLAGS@ XINERAMA_LIBS = @XINERAMA_LIBS@ XMKMF = @XMKMF@ +__PYTHON = @__PYTHON@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ -build = @build@ build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ -host = @host@ host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ @@ -201,7 +221,6 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ @@ -214,19 +233,14 @@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -rcdir = $(sysconfdir)/xdg/$(PACKAGE_NAME) ACLOCAL_AMFLAGS = -I m4 -SUBDIRS = doc src +SUBDIRS = doc sample src dist_doc_DATA = AUTHORS ChangeLog NEWS README EXTRA_DIST = autogen.sh README.source -dist_rc_DATA = tint2rc -@INSTALL_EXAMPLES_FALSE@examplesdir = -@INSTALL_EXAMPLES_TRUE@examplesdir = $(docdir)/examples -@INSTALL_EXAMPLES_FALSE@dist_examples_DATA = -@INSTALL_EXAMPLES_TRUE@dist_examples_DATA = tintrc01 tintrc02 tintrc03 tintrc04 tintrc05 tintrc06 -DISTCLEANFILES = configure depcomp config.guess config.sub config.h.in config.h.in~ ltmain.sh missing aclocal.m4 install-sh Makefile.in INSTALL +dist_pkgdata_DATA = default_icon.png all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive @@ -237,15 +251,15 @@ @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ - cd $(srcdir) && $(AUTOMAKE) --gnu \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -261,9 +275,10 @@ $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) + $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then \ @@ -275,72 +290,52 @@ @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool install-dist_docDATA: $(dist_doc_DATA) @$(NORMAL_INSTALL) test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)" - @list='$(dist_doc_DATA)'; for p in $$list; do \ + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(dist_docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ - $(dist_docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ done uninstall-dist_docDATA: @$(NORMAL_UNINSTALL) - @list='$(dist_doc_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ - rm -f "$(DESTDIR)$(docdir)/$$f"; \ - done -install-dist_examplesDATA: $(dist_examples_DATA) + @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(docdir)" && rm -f $$files +install-dist_pkgdataDATA: $(dist_pkgdata_DATA) @$(NORMAL_INSTALL) - test -z "$(examplesdir)" || $(MKDIR_P) "$(DESTDIR)$(examplesdir)" - @list='$(dist_examples_DATA)'; for p in $$list; do \ + test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" + @list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ + for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(dist_examplesDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(examplesdir)/$$f'"; \ - $(dist_examplesDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(examplesdir)/$$f"; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \ done -uninstall-dist_examplesDATA: +uninstall-dist_pkgdataDATA: @$(NORMAL_UNINSTALL) - @list='$(dist_examples_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(examplesdir)/$$f'"; \ - rm -f "$(DESTDIR)$(examplesdir)/$$f"; \ - done -install-dist_rcDATA: $(dist_rc_DATA) - @$(NORMAL_INSTALL) - test -z "$(rcdir)" || $(MKDIR_P) "$(DESTDIR)$(rcdir)" - @list='$(dist_rc_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(dist_rcDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(rcdir)/$$f'"; \ - $(dist_rcDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(rcdir)/$$f"; \ - done - -uninstall-dist_rcDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_rc_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(rcdir)/$$f'"; \ - rm -f "$(DESTDIR)$(rcdir)/$$f"; \ - done + @list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. @@ -349,7 +344,7 @@ # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): - @failcom='exit 1'; \ + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -366,7 +361,7 @@ else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ @@ -374,7 +369,7 @@ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -400,16 +395,16 @@ else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) @@ -417,14 +412,14 @@ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ @@ -436,7 +431,7 @@ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ @@ -445,36 +440,41 @@ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) - test -d $(distdir) || mkdir $(distdir) + test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -490,29 +490,44 @@ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ + am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ @@ -520,11 +535,13 @@ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) + || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) @@ -537,6 +554,10 @@ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz + $(am__remove_distdir) + dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) @@ -560,15 +581,17 @@ distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ - unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac @@ -576,9 +599,11 @@ mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ @@ -600,13 +625,15 @@ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: - @cd $(distuninstallcheck_dir) \ + @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ @@ -628,7 +655,7 @@ all-am: Makefile $(DATA) config.h installdirs: installdirs-recursive installdirs-am: - for dir in "$(DESTDIR)$(docdir)" "$(DESTDIR)$(examplesdir)" "$(DESTDIR)$(rcdir)"; do \ + for dir in "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgdatadir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive @@ -651,6 +678,7 @@ distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @@ -658,13 +686,13 @@ @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive -clean-am: clean-generic clean-libtool mostlyclean-am +clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-local distclean-tags +distclean-am: clean-am distclean-generic distclean-hdr distclean-local \ + distclean-tags dvi: dvi-recursive @@ -672,27 +700,38 @@ html: html-recursive +html-am: + info: info-recursive info-am: -install-data-am: install-dist_docDATA install-dist_examplesDATA \ - install-dist_rcDATA +install-data-am: install-dist_docDATA install-dist_pkgdataDATA install-dvi: install-dvi-recursive +install-dvi-am: + install-exec-am: install-html: install-html-recursive +install-html-am: + install-info: install-info-recursive +install-info-am: + install-man: install-pdf: install-pdf-recursive +install-pdf-am: + install-ps: install-ps-recursive +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-recursive @@ -703,7 +742,7 @@ mostlyclean: mostlyclean-recursive -mostlyclean-am: mostlyclean-generic mostlyclean-libtool +mostlyclean-am: mostlyclean-generic pdf: pdf-recursive @@ -713,30 +752,28 @@ ps-am: -uninstall-am: uninstall-dist_docDATA uninstall-dist_examplesDATA \ - uninstall-dist_rcDATA +uninstall-am: uninstall-dist_docDATA uninstall-dist_pkgdataDATA -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ + ctags-recursive install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-generic \ - clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ - dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-zip \ + ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ + dist-hook dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-generic distclean-hdr \ - distclean-libtool distclean-local distclean-tags \ - distcleancheck distdir distuninstallcheck dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dist_docDATA install-dist_examplesDATA \ - install-dist_rcDATA install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am uninstall-dist_docDATA \ - uninstall-dist_examplesDATA uninstall-dist_rcDATA + distclean-local distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am \ + install-dist_docDATA install-dist_pkgdataDATA install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am uninstall-dist_docDATA \ + uninstall-dist_pkgdataDATA dist-hook: @@ -746,6 +783,7 @@ distclean-local-check: -rm -rf autom4te.cache m4 + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -Nru tint2-0.7.1/missing tint2-0.9/missing --- tint2-0.7.1/missing 2008-05-03 03:38:24.000000000 +0100 +++ tint2-0.9/missing 2010-01-28 11:20:04.000000000 +0000 @@ -1,10 +1,10 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2006-05-10.23 +scriptversion=2009-04-28.21; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify @@ -18,9 +18,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -89,6 +87,9 @@ tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + Send bug reports to ." exit $? ;; @@ -106,15 +107,22 @@ esac +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect -# the program). +# the program). This is about non-GNU programs, so use $1 not +# $program. case $1 in - lex|yacc) + lex*|yacc*) # Not GNU programs, they don't have --version. ;; - tar) + tar*) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 @@ -138,7 +146,7 @@ # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case $1 in +case $program in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if @@ -148,7 +156,7 @@ touch aclocal.m4 ;; - autoconf) + autoconf*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the @@ -157,7 +165,7 @@ touch configure ;; - autoheader) + autoheader*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want @@ -187,7 +195,7 @@ while read f; do touch "$f"; done ;; - autom4te) + autom4te*) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the @@ -210,7 +218,7 @@ fi ;; - bison|yacc) + bison*|yacc*) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package @@ -240,7 +248,7 @@ fi ;; - lex|flex) + lex*|flex*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package @@ -263,7 +271,7 @@ fi ;; - help2man) + help2man*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the @@ -277,11 +285,11 @@ else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" - exit 1 + exit $? fi ;; - makeinfo) + makeinfo*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file @@ -310,7 +318,7 @@ touch $file ;; - tar) + tar*) shift # We have already tried tar in the generic part. @@ -363,5 +371,6 @@ # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: diff -Nru tint2-0.7.1/README tint2-0.9/README --- tint2-0.7.1/README 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/README 2009-12-16 12:36:27.000000000 +0000 @@ -3,9 +3,7 @@ or "tint2 -c path_to_config_file" -documentation is in /doc - -check http://code.google.com/p/tint2/ +check http://code.google.com/p/tint2/ for latest release, documentation and sample config file. diff -Nru tint2-0.7.1/sample/black_single_desktop.tint2rc tint2-0.9/sample/black_single_desktop.tint2rc --- tint2-0.7.1/sample/black_single_desktop.tint2rc 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/sample/black_single_desktop.tint2rc 2010-01-28 11:16:34.000000000 +0000 @@ -0,0 +1,124 @@ +#--------------------------------------------- +# TINT2 CONFIG FILE +#--------------------------------------------- + +#--------------------------------------------- +# BACKGROUND AND BORDER +#--------------------------------------------- +rounded = 0 +border_width = 0 +background_color = #000000 66 +border_color = #000000 0 + +rounded = 1 +border_width = 1 +background_color = #000000 75 +border_color = #000000 50 + +rounded = 1 +border_width = 1 +background_color = #c8c8c8 100 +border_color = #7b7b7b 90 + +rounded = 7 +border_width = 1 +background_color = #000000 60 +border_color = #ffffff 18 + +rounded = 5 +border_width = 0 +background_color = #ffffff 30 +border_color = #ffffff 18 + +rounded = 5 +border_width = 0 +background_color = #ffffff 50 +border_color = #ffffff 70 + +#--------------------------------------------- +# PANEL +#--------------------------------------------- +panel_monitor = 1 +panel_position = bottom center horizontal +panel_size = 100% 30 +panel_margin = 0 0 +panel_padding = 0 0 2 +font_shadow = 0 +panel_background_id = 1 +wm_menu = 1 +panel_dock = 0 +panel_layer = bottom + +#--------------------------------------------- +# TASKBAR +#--------------------------------------------- +taskbar_mode = single_desktop +taskbar_padding = 0 5 2 +taskbar_background_id = 0 +#taskbar_active_background_id = 0 + +#--------------------------------------------- +# TASK +#--------------------------------------------- +task_icon = 0 +task_text = 1 +task_maximum_size = 180 22 +task_centered = 1 +task_padding = 16 4 +task_font = Helvetica 8 +task_font_color = #aaaaaa 100 +task_active_font_color = #444444 100 +task_background_id = 2 +task_active_background_id = 3 + +#--------------------------------------------- +# SYSTRAYBAR +#--------------------------------------------- +systray = 1 +systray_padding = 7 8 5 +systray_background_id = 1 +systray_sort = left2right +systray_icon_size = 0 + +#--------------------------------------------- +# TOOLTIP +#--------------------------------------------- +tooltip = 1 +tooltip_padding = 2 2 +tooltip_show_timeout = 0.7 +tooltip_hide_timeout = 0.3 +tooltip_background_id = 3 +tooltip_font_color = #OOOOOO 80 +tooltip_font = Helvetica 8 + +#--------------------------------------------- +# BATTERY +#--------------------------------------------- +battery = 1 +battery_hide = 98 +battery_low_status = 7 +battery_low_cmd = notify-send "battery low" +bat1_font = sans 8 +bat2_font = sans 6 +battery_font_color = #ffffff 76 +battery_padding = 1 0 +battery_background_id = 0 + +#--------------------------------------------- +# MOUSE ACTION ON TASK +#--------------------------------------------- +mouse_middle = none +mouse_right = close +mouse_scroll_up = toggle +mouse_scroll_down = iconify + +#--------------------------------------------- +# AUTOHIDE OPTIONS +#--------------------------------------------- +autohide = 0 +autohide_show_timeout = 0.3 +autohide_hide_timeout = 2 +autohide_height = 4 +strut_policy = minimum + + diff -Nru tint2-0.7.1/sample/default.tint2rc tint2-0.9/sample/default.tint2rc --- tint2-0.7.1/sample/default.tint2rc 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/sample/default.tint2rc 2010-01-28 11:16:34.000000000 +0000 @@ -0,0 +1,138 @@ +#--------------------------------------------- +# TINT2 CONFIG FILE +#--------------------------------------------- + +#--------------------------------------------- +# BACKGROUND AND BORDER +#--------------------------------------------- +rounded = 0 +border_width = 1 +#background_color = #5E5E5E 25 +#background_color = #ffffff 20 +background_color = #000000 50 +border_color = #9b9b9b 35 + +rounded = 1 +border_width = 1 +background_color = #000000 70 +border_color = #9b9b9b 75 + +rounded = 1 +border_width = 0 +background_color = #OOOOOO 70 +border_color = #ffffff 20 + +# tooltip +rounded = 0 +border_width = 0 +background_color = #bbbbbb +border_color = #bbbbbb 30 + +#--------------------------------------------- +# PANEL +#--------------------------------------------- +panel_monitor = all +#panel_position = center left vertical +panel_position = bottom center horizontal +panel_size = 100% 32 +panel_margin = 0 0 +panel_padding = 7 2 7 +font_shadow = 0 +panel_background_id = 0 +wm_menu = 1 +panel_dock = 0 +panel_layer = bottom + +#--------------------------------------------- +# TASKBAR +#--------------------------------------------- +taskbar_mode = multi_desktop +#taskbar_mode = single_desktop +taskbar_padding = 0 0 0 +taskbar_background_id = 1 +taskbar_active_background_id = 2 + +#--------------------------------------------- +# TASK +#--------------------------------------------- +task_icon = 1 +task_text = 0 +task_maximum_size = 50 35 +task_centered = 1 +task_padding = 4 2 +task_font = kiloji 8 +task_font_color = #a0a0a0 100 +task_active_font_color = #d4d4d4 100 +#task_icon_asb = 0 -45 -10 +task_icon_asb = 90 -70 -20 +task_active_icon_asb = 100 -50 -15 +task_background_id = 0 +task_active_background_id = 3 + +#--------------------------------------------- +# SYSTRAYBAR +#--------------------------------------------- +systray = 1 +systray_padding = 8 4 5 +systray_background_id = 1 +systray_sort = left2right +systray_icon_size = 0 + +#--------------------------------------------- +# BATTERY +#--------------------------------------------- +battery = 1 +battery_hide = never +battery_low_status = 7 +battery_low_cmd = notify-send "battery low" +bat1_font = sans 8 +bat2_font = sans 6 +battery_font_color = #ffffff 76 +battery_padding = 1 0 +battery_background_id = 2 + +#--------------------------------------------- +# CLOCK +#--------------------------------------------- +time1_format = %H:%M +time1_font = sans 8 +time2_format = %A %d %B +time2_font = sans 6 +clock_font_color = #ffffff 76 +clock_padding = 1 0 +clock_background_id = 1 +#clock_lclick_command = xclock +clock_rclick_command = orage +#clock_tooltip = %A %d %B +#time1_timezone = :US/Hawaii +#time2_timezone = :Europe/Berlin +#clock_tooltip_timezone = :/usr/share/zoneinfo/Europe/Paris + +#--------------------------------------------- +# TOOLTIP +#--------------------------------------------- +tooltip = 1 +tooltip_padding = 2 2 +tooltip_show_timeout = 0.7 +tooltip_hide_timeout = 0.3 +tooltip_background_id = 4 +tooltip_font_color = #OOOOOO 80 +tooltip_font = sans 10 + +#--------------------------------------------- +# MOUSE ACTION ON TASK +#--------------------------------------------- +mouse_middle = none +mouse_right = close +mouse_scroll_up = toggle +mouse_scroll_down = iconify + +#--------------------------------------------- +# AUTOHIDE OPTIONS +#--------------------------------------------- +autohide = 0 +autohide_show_timeout = 0.3 +autohide_hide_timeout = 2 +autohide_height = 4 +strut_policy = minimum + diff -Nru tint2-0.7.1/sample/horizontal_icon_only.tint2rc tint2-0.9/sample/horizontal_icon_only.tint2rc --- tint2-0.7.1/sample/horizontal_icon_only.tint2rc 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/sample/horizontal_icon_only.tint2rc 2010-01-28 11:16:34.000000000 +0000 @@ -0,0 +1,136 @@ +#--------------------------------------------- +# TINT2 CONFIG FILE +#--------------------------------------------- + +#--------------------------------------------- +# BACKGROUND AND BORDER +#--------------------------------------------- +rounded = 0 +border_width = 0 +background_color = #000000 55 +border_color = #9b9b9b 35 + +rounded = 1 +border_width = 1 +background_color = #000000 70 +border_color = #9b9b9b 75 + +rounded = 1 +border_width = 0 +background_color = #OOOOOO 70 +border_color = #ffffff 20 + +# tooltip +rounded = 0 +border_width = 0 +background_color = #bbbbbb +border_color = #bbbbbb 30 + +#--------------------------------------------- +# PANEL +#--------------------------------------------- +panel_monitor = all +#panel_position = center left vertical +panel_position = bottom center horizontal +panel_size = 100% 32 +panel_margin = 0 0 +panel_padding = 5 2 0 +font_shadow = 0 +panel_background_id = 1 +wm_menu = 1 +panel_dock = 0 +panel_layer = bottom + +#--------------------------------------------- +# TASKBAR +#--------------------------------------------- +taskbar_mode = multi_desktop +#taskbar_mode = single_desktop +taskbar_padding = 1 1 0 +taskbar_background_id = 0 +taskbar_active_background_id = 2 + +#--------------------------------------------- +# TASK +#--------------------------------------------- +task_icon = 1 +task_text = 0 +task_maximum_size = 50 35 +task_centered = 1 +task_padding = 4 2 +task_font = kiloji 8 +task_font_color = #a0a0a0 100 +task_active_font_color = #d4d4d4 100 +#task_icon_asb = 0 -45 -10 +task_icon_asb = 90 -70 -20 +task_active_icon_asb = 100 -50 -15 +task_background_id = 0 +task_active_background_id = 3 + +#--------------------------------------------- +# SYSTRAYBAR +#--------------------------------------------- +systray = 1 +systray_padding = 8 6 5 +systray_background_id = 0 +systray_sort = left2right +systray_icon_size = 0 + +#--------------------------------------------- +# BATTERY +#--------------------------------------------- +battery = 1 +battery_hide = 98 +battery_low_status = 7 +battery_low_cmd = notify-send "battery low" +bat1_font = sans 8 +bat2_font = sans 6 +battery_font_color = #ffffff 76 +battery_padding = 1 0 +battery_background_id = 2 + +#--------------------------------------------- +# CLOCK +#--------------------------------------------- +time1_format = %H:%M +time1_font = sans 8 +time2_format = %A %d %B +time2_font = sans 6 +clock_font_color = #ffffff 76 +clock_padding = 2 0 +clock_background_id = 0 +#clock_lclick_command = xclock +clock_rclick_command = orage +#clock_tooltip = %A %d %B +#time1_timezone = :US/Hawaii +#time2_timezone = :Europe/Berlin +#clock_tooltip_timezone = :/usr/share/zoneinfo/Europe/Paris + +#--------------------------------------------- +# TOOLTIP +#--------------------------------------------- +tooltip = 1 +tooltip_padding = 2 2 +tooltip_show_timeout = 0.7 +tooltip_hide_timeout = 0.3 +tooltip_background_id = 1 +tooltip_font_color = #OOOOOO 80 +tooltip_font = sans 10 + +#--------------------------------------------- +# MOUSE ACTION ON TASK +#--------------------------------------------- +mouse_middle = none +mouse_right = close +mouse_scroll_up = toggle +mouse_scroll_down = iconify + +#--------------------------------------------- +# AUTOHIDE OPTIONS +#--------------------------------------------- +autohide = 0 +autohide_show_timeout = 0.3 +autohide_hide_timeout = 2 +autohide_height = 4 +strut_policy = minimum + diff -Nru tint2-0.7.1/sample/Makefile.am tint2-0.9/sample/Makefile.am --- tint2-0.7.1/sample/Makefile.am 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/sample/Makefile.am 2009-10-25 09:53:21.000000000 +0000 @@ -0,0 +1,17 @@ +rcdir = $(sysconfdir)/xdg/$(PACKAGE_NAME) + +dist_rc_DATA = tint2rc + +if INSTALL_EXAMPLES +examplesdir = $(docdir)/examples +dist_examples_DATA = default.tint2rc \ + vertical_icon_only.tint2rc \ + rounded_multi_desktop.tint2rc \ + black_single_desktop.tint2rc \ + horizontal_icon_only.tint2rc \ + white_single_desktop.tint2rc +else +examplesdir = +dist_examples_DATA = +endif + diff -Nru tint2-0.7.1/sample/Makefile.in tint2-0.9/sample/Makefile.in --- tint2-0.7.1/sample/Makefile.in 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/sample/Makefile.in 2010-01-28 11:16:45.000000000 +0000 @@ -0,0 +1,424 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = sample +DIST_COMMON = $(am__dist_examples_DATA_DIST) $(dist_rc_DATA) \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +SOURCES = +DIST_SOURCES = +am__dist_examples_DATA_DIST = default.tint2rc \ + vertical_icon_only.tint2rc rounded_multi_desktop.tint2rc \ + black_single_desktop.tint2rc horizontal_icon_only.tint2rc \ + white_single_desktop.tint2rc +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(examplesdir)" "$(DESTDIR)$(rcdir)" +DATA = $(dist_examples_DATA) $(dist_rc_DATA) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CFLAGS = @AM_CFLAGS@ +AM_LDFLAGS = @AM_LDFLAGS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CAIRO_CFLAGS = @CAIRO_CFLAGS@ +CAIRO_LIBS = @CAIRO_LIBS@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DISTCLEANFILES = @DISTCLEANFILES@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GLIB2_CFLAGS = @GLIB2_CFLAGS@ +GLIB2_LIBS = @GLIB2_LIBS@ +GOBJECT2_CFLAGS = @GOBJECT2_CFLAGS@ +GOBJECT2_LIBS = @GOBJECT2_LIBS@ +GREP = @GREP@ +IMLIB2_CFLAGS = @IMLIB2_CFLAGS@ +IMLIB2_LIBS = @IMLIB2_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PANGOCAIRO_CFLAGS = @PANGOCAIRO_CFLAGS@ +PANGOCAIRO_LIBS = @PANGOCAIRO_LIBS@ +PANGO_CFLAGS = @PANGO_CFLAGS@ +PANGO_LIBS = @PANGO_LIBS@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TINT2CONF_CFLAGS = @TINT2CONF_CFLAGS@ +TINT2CONF_LIBS = @TINT2CONF_LIBS@ +VERSION = @VERSION@ +X11_CFLAGS = @X11_CFLAGS@ +X11_LIBS = @X11_LIBS@ +XINERAMA_CFLAGS = @XINERAMA_CFLAGS@ +XINERAMA_LIBS = @XINERAMA_LIBS@ +XMKMF = @XMKMF@ +__PYTHON = @__PYTHON@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +rcdir = $(sysconfdir)/xdg/$(PACKAGE_NAME) +dist_rc_DATA = tint2rc +@INSTALL_EXAMPLES_FALSE@examplesdir = +@INSTALL_EXAMPLES_TRUE@examplesdir = $(docdir)/examples +@INSTALL_EXAMPLES_FALSE@dist_examples_DATA = +@INSTALL_EXAMPLES_TRUE@dist_examples_DATA = default.tint2rc \ +@INSTALL_EXAMPLES_TRUE@ vertical_icon_only.tint2rc \ +@INSTALL_EXAMPLES_TRUE@ rounded_multi_desktop.tint2rc \ +@INSTALL_EXAMPLES_TRUE@ black_single_desktop.tint2rc \ +@INSTALL_EXAMPLES_TRUE@ horizontal_icon_only.tint2rc \ +@INSTALL_EXAMPLES_TRUE@ white_single_desktop.tint2rc + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu sample/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu sample/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-dist_examplesDATA: $(dist_examples_DATA) + @$(NORMAL_INSTALL) + test -z "$(examplesdir)" || $(MKDIR_P) "$(DESTDIR)$(examplesdir)" + @list='$(dist_examples_DATA)'; test -n "$(examplesdir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(examplesdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(examplesdir)" || exit $$?; \ + done + +uninstall-dist_examplesDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_examples_DATA)'; test -n "$(examplesdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(examplesdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(examplesdir)" && rm -f $$files +install-dist_rcDATA: $(dist_rc_DATA) + @$(NORMAL_INSTALL) + test -z "$(rcdir)" || $(MKDIR_P) "$(DESTDIR)$(rcdir)" + @list='$(dist_rc_DATA)'; test -n "$(rcdir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(rcdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(rcdir)" || exit $$?; \ + done + +uninstall-dist_rcDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_rc_DATA)'; test -n "$(rcdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(rcdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(rcdir)" && rm -f $$files +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(examplesdir)" "$(DESTDIR)$(rcdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_examplesDATA install-dist_rcDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_examplesDATA uninstall-dist_rcDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am \ + install-dist_examplesDATA install-dist_rcDATA install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \ + uninstall-dist_examplesDATA uninstall-dist_rcDATA + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff -Nru tint2-0.7.1/sample/rounded_multi_desktop.tint2rc tint2-0.9/sample/rounded_multi_desktop.tint2rc --- tint2-0.7.1/sample/rounded_multi_desktop.tint2rc 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/sample/rounded_multi_desktop.tint2rc 2010-01-28 11:16:34.000000000 +0000 @@ -0,0 +1,116 @@ +#--------------------------------------------- +# TINT2 CONFIG FILE +#--------------------------------------------- + +#--------------------------------------------- +# BACKGROUND AND BORDER +#--------------------------------------------- +rounded = 5 +border_width = 1 +background_color = #44475D 45 +border_color = #44475D 100 + +rounded = 5 +border_width = 1 +background_color = #ffffff 20 +border_color = #444444 70 + +rounded = 0 +border_width = 1 +background_color = #ffffff 20 +border_color = #444444 20 + +rounded = 5 +border_width = 1 +background_color = #ffffff 20 +border_color = #ffffff 50 + +#--------------------------------------------- +# PANEL +#--------------------------------------------- +panel_monitor = all +panel_position = bottom center horizontal +panel_size = 99% 35 +panel_margin = 0 0 +panel_padding = 10 3 10 +font_shadow = 0 +panel_background_id = 1 +wm_menu = 1 +panel_dock = 0 +panel_layer = bottom + +#--------------------------------------------- +# TASKBAR +#--------------------------------------------- +taskbar_mode = multi_desktop +taskbar_padding = 2 0 0 +taskbar_background_id = 2 +taskbar_active_background_id = 4 + +#--------------------------------------------- +# TASK +#--------------------------------------------- +task_icon = 10 +task_text = 0 +task_maximum_size = 40 20 +task_centered = 1 +task_padding = 0 2 +task_font = kiloji 10 +task_font_color = #333333 80 +task_active_font_color = #333333 100 +task_icon_asb = 100 -50 -20 +task_active_icon_asb = 100 -20 10 +task_background_id = 0 +#task_active_background_id = 3 +task_active_background_id = 0 + +#--------------------------------------------- +# SYSTRAYBAR +#--------------------------------------------- +systray = 1 +systray_padding = 6 5 5 +systray_background_id =2 +systray_sort = left2right +systray_icon_size = 0 + +#--------------------------------------------- +# BATTERY +#--------------------------------------------- +battery = 0 +battery_hide = 98 +battery_low_status = 7 +battery_low_cmd = notify-send "battery low" +bat1_font = sans 8 +bat2_font = sans 6 +battery_font_color = #ffffff 76 +battery_padding = 1 0 +battery_background_id = 2 + +#--------------------------------------------- +# TOOLTIP +#--------------------------------------------- +tooltip = 1 +tooltip_padding = 2 2 +tooltip_show_timeout = 0.7 +tooltip_hide_timeout = 0.3 +tooltip_background_id = 3 +tooltip_font_color = #OOOOOO 80 +tooltip_font = sans 10 + +#--------------------------------------------- +# MOUSE ACTION ON TASK +#--------------------------------------------- +mouse_middle = none +mouse_right = close +mouse_scroll_up = toggle +mouse_scroll_down = iconify + +#--------------------------------------------- +# AUTOHIDE OPTIONS +#--------------------------------------------- +autohide = 0 +autohide_show_timeout = 0.3 +autohide_hide_timeout = 2 +autohide_height = 4 +strut_policy = minimum + diff -Nru tint2-0.7.1/sample/tint2rc tint2-0.9/sample/tint2rc --- tint2-0.7.1/sample/tint2rc 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/sample/tint2rc 2010-01-28 11:16:34.000000000 +0000 @@ -0,0 +1,134 @@ +#--------------------------------------------- +# TINT2 CONFIG FILE +#--------------------------------------------- + +#--------------------------------------------- +# BACKGROUND AND BORDER +#--------------------------------------------- +rounded = 7 +border_width = 2 +background_color = #000000 60 +border_color = #ffffff 18 + +rounded = 5 +border_width = 0 +background_color = #ffffff 40 +border_color = #ffffff 50 + +rounded = 5 +border_width = 0 +background_color = #ffffff 18 +border_color = #ffffff 70 + +#--------------------------------------------- +# PANEL +#--------------------------------------------- +panel_monitor = all +panel_position = bottom center +panel_size = 94% 30 +panel_margin = 0 0 +panel_padding = 7 0 +font_shadow = 0 +panel_background_id = 1 +wm_menu = 0 +panel_dock = 0 +panel_layer = bottom + +#--------------------------------------------- +# TASKBAR +#--------------------------------------------- +#taskbar_mode = multi_desktop +taskbar_mode = single_desktop +taskbar_padding = 2 3 2 +taskbar_background_id = 0 +#taskbar_active_background_id = 0 + +#--------------------------------------------- +# TASKS +#--------------------------------------------- +task_icon = 1 +task_text = 1 +task_maximum_size = 140 35 +task_centered = 1 +task_padding = 6 3 +task_font = sans 7 +task_font_color = #ffffff 70 +task_background_id = 3 +task_icon_asb = 100 0 0 +# replace STATUS by 'urgent', 'active' or 'iconfied' +#task_STATUS_background_id = 2 +#task_STATUS_font_color = #ffffff 85 +#task_STATUS_icon_asb = 100 0 0 +# example: +task_active_background_id = 2 +task_active_font_color = #ffffff 85 +task_active_icon_asb = 100 0 0 +urgent_nb_of_blink = 8 + +#--------------------------------------------- +# SYSTRAYBAR +#--------------------------------------------- +systray = 1 +systray_padding = 0 4 5 +systray_background_id = 0 +systray_sort = left2right +systray_icon_size = 0 +systray_icon_asb = 100 0 0 + +#--------------------------------------------- +# CLOCK +#--------------------------------------------- +time1_format = %H:%M +time1_font = sans 8 +time2_format = %A %d %B +time2_font = sans 6 +clock_font_color = #ffffff 76 +clock_padding = 1 0 +clock_background_id = 0 +#clock_lclick_command = xclock +clock_rclick_command = orage +#clock_tooltip = %A %d %B +#time1_timezone = :US/Hawaii +#time2_timezone = :Europe/Berlin +#clock_tooltip_timezone = :/usr/share/zoneinfo/Europe/Paris + +#--------------------------------------------- +# BATTERY +#--------------------------------------------- +battery = 0 +battery_hide = 98 +battery_low_status = 10 +battery_low_cmd = notify-send "battery low" +bat1_font = sans 8 +bat2_font = sans 6 +battery_font_color = #ffffff 76 +battery_padding = 1 0 +battery_background_id = 0 + +#--------------------------------------------- +# TOOLTIP +#--------------------------------------------- +tooltip = 0 +tooltip_padding = 2 2 +tooltip_show_timeout = 0.7 +tooltip_hide_timeout = 0.3 +tooltip_background_id = 1 +tooltip_font_color = #OOOOOO 80 +tooltip_font = sans 10 + +#--------------------------------------------- +# MOUSE ACTION ON TASK +#--------------------------------------------- +mouse_middle = none +mouse_right = close +mouse_scroll_up = toggle +mouse_scroll_down = iconify + +#--------------------------------------------- +# AUTOHIDE OPTIONS +#--------------------------------------------- +autohide = 0 +autohide_show_timeout = 0.3 +autohide_hide_timeout = 2 +autohide_height = 4 +strut_policy = minimum diff -Nru tint2-0.7.1/sample/vertical_icon_only.tint2rc tint2-0.9/sample/vertical_icon_only.tint2rc --- tint2-0.7.1/sample/vertical_icon_only.tint2rc 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/sample/vertical_icon_only.tint2rc 2010-01-28 11:16:34.000000000 +0000 @@ -0,0 +1,126 @@ +#--------------------------------------------- +# TINT2 CONFIG FILE +#--------------------------------------------- + +#--------------------------------------------- +# BACKGROUND AND BORDER +#--------------------------------------------- +rounded = 3 +border_width = 1 +background_color = #000000 60 +border_color = #ffffff 30 + +rounded = 3 +border_width = 1 +background_color = #ffffff 0 +border_color = #ffffff 20 + +rounded = 3 +border_width = 1 +background_color = #000000 18 +border_color = #ffffff 35 + +#--------------------------------------------- +# PANEL +#--------------------------------------------- +panel_monitor = all +panel_position = center left vertical +panel_size = 100% 45 +panel_margin = 0 0 +panel_padding = 2 0 +font_shadow = 0 +panel_background_id = 0 +wm_menu = 0 +panel_dock = 0 +panel_layer = bottom + +#--------------------------------------------- +# TASKBAR +#--------------------------------------------- +#taskbar_mode = multi_desktop +taskbar_mode = single_desktop +taskbar_padding = 0 0 2 +taskbar_background_id = 3 +#taskbar_active_background_id = 0 + +#--------------------------------------------- +# TASKS +#--------------------------------------------- +task_icon = 1 +task_text = 0 +task_maximum_size = 50 35 +task_centered = 1 +task_padding = 0 2 +task_font = Aller 9 +task_font_color = #ffffff 70 +task_active_font_color = #ffffff 85 +task_background_id = 2 +task_active_background_id = 1 + +#--------------------------------------------- +# SYSTRAYBAR +#--------------------------------------------- +systray = 1 +systray_padding = 2 8 0 +systray_background_id = 1 +systray_sort = left2right +systray_icon_size = 0 + +#--------------------------------------------- +# CLOCK +#--------------------------------------------- +time1_format = %a %d +time1_font = Aller 7 +time2_format = %I:%M +time2_font = Aller 10 +clock_font_color = #ffffff 100 +clock_padding = 6 4 +clock_background_id = 1 +#clock_lclick_command = xclock +#clock_rclick_command = orage +#clock_tooltip = %A %d %B +#time1_timezone = :US/Hawaii +#time2_timezone = :Europe/Berlin +#clock_tooltip_timezone = :/usr/share/zoneinfo/Europe/Paris + +#--------------------------------------------- +# BATTERY +#--------------------------------------------- +battery = 1 +battery_hide = 98 +battery_low_status = 10 +battery_low_cmd = notify-send "battery low" +bat1_font = sans 8 +bat2_font = sans 6 +battery_font_color = #ffffff 76 +battery_padding = 1 0 +battery_background_id = 0 + +#--------------------------------------------- +# TOOLTIP +#--------------------------------------------- +tooltip = 0 +tooltip_padding = 2 2 +tooltip_show_timeout = 0.7 +tooltip_hide_timeout = 0.3 +tooltip_background_id = 1 +tooltip_font_color = #OOOOOO 80 +tooltip_font = sans 10 + +#--------------------------------------------- +# MOUSE ACTION ON TASK +#--------------------------------------------- +mouse_middle = none +mouse_right = close +mouse_scroll_up = toggle +mouse_scroll_down = iconify + +#--------------------------------------------- +# AUTOHIDE OPTIONS +#--------------------------------------------- +autohide = 0 +autohide_show_timeout = 0.3 +autohide_hide_timeout = 2 +autohide_height = 4 +strut_policy = minimum + diff -Nru tint2-0.7.1/sample/white_single_desktop.tint2rc tint2-0.9/sample/white_single_desktop.tint2rc --- tint2-0.7.1/sample/white_single_desktop.tint2rc 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/sample/white_single_desktop.tint2rc 2010-01-28 11:16:34.000000000 +0000 @@ -0,0 +1,134 @@ +#--------------------------------------------- +# TINT2 CONFIG FILE +#--------------------------------------------- + +#--------------------------------------------- +# BACKGROUND AND BORDER +#--------------------------------------------- + +rounded = 0 +border_width = 0 +background_color = #ffffff 0 +border_color = #ffffff 60 + +rounded = 0 +border_width = 1 +background_color = #333333 50 +#background_color = #719B69 50 +border_color = #ffffff 40 + + +rounded = 0 +border_width = 0 +#background_color = #A6B384 20 +background_color = #eeeeec 70 +border_color = #ffffff + + +#--------------------------------------------- +# PANEL +#--------------------------------------------- +panel_monitor = all +#panel_mode = single_monitor +panel_position = bottom center horizontal +panel_size = 99% 27 +panel_margin = 0 0 +panel_padding = 3 3 3 3 +font_shadow = 0 +panel_background_id = 3 +wm_menu = 1 +panel_dock = 0 +panel_layer = bottom + + +#--------------------------------------------- +# TASKS +#--------------------------------------------- +task_icon = 0 +task_text = 1 +task_maximum_size = 100 +task_centered = 1 +task_margin = 4 +task_padding = 5 +#task_icon_size = 13 +task_font = AvantGardeLTMedium 9 +task_font_color = #151515 60 +task_active_font_color = #ffffff 70 +task_background_id = 1 +task_active_background_id = 2 + + +#--------------------------------------------- +# TASKBAR +#--------------------------------------------- +taskbar_mode = multi_desktop +taskbar_padding = 0 0 0 +taskbar_background_id = 0 +taskbar_active_background_id = 0 + +#--------------------------------------------- +# SYSTRAYBAR +#--------------------------------------------- +systray = 1 +systray_padding = 4 2 3 +systray_background_id = 0 +systray_sort = left2right +systray_icon_size = 0 + +#--------------------------------------------- +# CLOCK +#--------------------------------------------- +time1_format = %H:%M +#time1_font = Museo 8 +time1_font = AvantGardeLTMedium 9 bold +#time2_format = %A %d %B +#time2_font = Monospace 6 +clock_font_color = #151515 60 +clock_padding = 4 0 +clock_tooltip = %A %d %B +clock_background_id = 1 +#time1_timezone = :US/Hawaii +#time2_timezone = :Europe/Berlin +#clock_tooltip_timezone = :/usr/share/zoneinfo/Europe/Paris + +#--------------------------------------------- +# BATTERY +#--------------------------------------------- +battery = 0 +battery_hide = 98 +battery_low_status = 7 +battery_low_cmd = notify-send "battery low" +bat1_font = sans 8 +bat2_font = sans 6 +battery_font_color = #151515 60 +battery_padding = 1 0 +battery_background_id = 0 + +#--------------------------------------------- +# TOOLTIP +#--------------------------------------------- +tooltip = 1 +tooltip_padding = 2 2 +tooltip_show_timeout = 0.7 +tooltip_hide_timeout = 0.3 +tooltip_background_id = 1 +tooltip_font_color = #OOOOOO 80 +tooltip_font = sans 10 + +#--------------------------------------------- +# MOUSE ACTION ON TASK +#--------------------------------------------- +mouse_middle = none +mouse_right = close +mouse_scroll_up = toggle +mouse_scroll_down = iconify + +#--------------------------------------------- +# AUTOHIDE OPTIONS +#--------------------------------------------- +autohide = 0 +autohide_show_timeout = 0.3 +autohide_hide_timeout = 2 +autohide_height = 4 +strut_policy = minimum + diff -Nru tint2-0.7.1/src/battery/battery.c tint2-0.9/src/battery/battery.c --- tint2-0.7.1/src/battery/battery.c 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/battery/battery.c 2010-01-19 19:29:28.000000000 +0000 @@ -26,33 +26,68 @@ #include "window.h" #include "server.h" -#include "taskbar.h" -#include "panel.h" #include "area.h" +#include "panel.h" +#include "taskbar.h" #include "battery.h" #include "clock.h" +#include "timer.h" -PangoFontDescription *bat1_font_desc; -PangoFontDescription *bat2_font_desc; +PangoFontDescription *bat1_font_desc=0; +PangoFontDescription *bat2_font_desc=0; struct batstate battery_state; +int battery_enabled; +int percentage_hide = 101; +static timeout* battery_timeout=0; static char buf_bat_percentage[10]; static char buf_bat_time[20]; int8_t battery_low_status; -char *battery_low_cmd; -char *path_energy_now, *path_energy_full, *path_current_now, *path_status; +char *battery_low_cmd=0; +unsigned char battery_low_cmd_send=0; +char *path_energy_now=0; +char *path_energy_full=0; +char *path_current_now=0; +char *path_status=0; + +void update_batterys(void* arg) +{ + int i; + update_battery(); + for (i=0 ; i < nb_panel ; i++) { + if (battery_state.percentage >= percentage_hide) { + if (panel1[i].battery.area.on_screen == 1) { + panel1[i].battery.area.on_screen = 0; + // force resize on panel + panel1[i].area.resize = 1; + panel_refresh = 1; + } + continue; + } + else { + if (panel1[i].battery.area.on_screen == 0) { + panel1[i].battery.area.on_screen = 1; + // force resize on panel + panel1[i].area.resize = 1; + panel_refresh = 1; + } + } + panel1[i].battery.area.resize = 1; + } +} void init_battery() { // check battery - GDir *directory; + GDir *directory = 0; GError *error = NULL; const char *entryname; char *battery_dir = 0; - path_energy_now = path_energy_full = path_current_now = path_status = 0; + if (!battery_enabled) return; + directory = g_dir_open("/sys/class/power_supply", 0, &error); if (error) g_error_free(error); @@ -69,98 +104,121 @@ g_free(path1); } } - if (battery_dir != 0) { - char *path1 = g_build_filename(battery_dir, "energy_now", NULL); - if (g_file_test (path1, G_FILE_TEST_EXISTS)) { - path_energy_now = g_build_filename(battery_dir, "energy_now", NULL); - path_energy_full = g_build_filename(battery_dir, "energy_full", NULL); + if (directory) + g_dir_close(directory); + if (!battery_dir) { + cleanup_battery(); + fprintf(stderr, "ERROR: battery applet can't found power_supply\n"); + return; + } + + char *path1 = g_build_filename(battery_dir, "energy_now", NULL); + if (g_file_test (path1, G_FILE_TEST_EXISTS)) { + path_energy_now = g_build_filename(battery_dir, "energy_now", NULL); + path_energy_full = g_build_filename(battery_dir, "energy_full", NULL); + } + else { + char *path2 = g_build_filename(battery_dir, "charge_now", NULL); + if (g_file_test (path2, G_FILE_TEST_EXISTS)) { + path_energy_now = g_build_filename(battery_dir, "charge_now", NULL); + path_energy_full = g_build_filename(battery_dir, "charge_full", NULL); } else { - char *path2 = g_build_filename(battery_dir, "charge_now", NULL); - if (g_file_test (path2, G_FILE_TEST_EXISTS)) { - path_energy_now = g_build_filename(battery_dir, "charge_now", NULL); - path_energy_full = g_build_filename(battery_dir, "charge_full", NULL); - } - else { - g_free(battery_dir); - battery_dir = 0; - fprintf(stderr, "ERROR: can't found energy_* or charge_*\n"); - } - g_free(path2); + fprintf(stderr, "ERROR: can't found energy_* or charge_*\n"); } + g_free(path2); + } + if (path_energy_now && path_energy_full) { path_current_now = g_build_filename(battery_dir, "current_now", NULL); path_status = g_build_filename(battery_dir, "status", NULL); - g_free(path1); + + // check file + FILE *fp1, *fp2, *fp3, *fp4; + fp1 = fopen(path_energy_now, "r"); + fp2 = fopen(path_energy_full, "r"); + fp3 = fopen(path_current_now, "r"); + fp4 = fopen(path_status, "r"); + if (fp1 == NULL || fp2 == NULL || fp3 == NULL || fp4 == NULL) { + cleanup_battery(); + fprintf(stderr, "ERROR: battery applet can't open energy_now\n"); + } + fclose(fp1); + fclose(fp2); + fclose(fp3); + fclose(fp4); } - FILE *fp; - Panel *panel; - Battery *battery; - int i, bat_percentage_height, bat_percentage_height_ink, bat_time_height, bat_time_height_ink; + g_free(path1); + g_free(battery_dir); - for (i=0 ; i < nb_panel ; i++) { - panel = &panel1[i]; - battery = &panel->battery; + if (battery_enabled && battery_timeout==0) + battery_timeout = add_timeout(10, 10000, update_batterys, 0); +} - if (battery_dir == 0) battery->area.on_screen = 0; - if (!battery->area.on_screen) continue; - battery->area.parent = panel; - battery->area.panel = panel; - battery->area._draw_foreground = draw_battery; - battery->area._resize = resize_battery; - battery->area.resize = 1; - battery->area.redraw = 1; +void cleanup_battery() +{ + battery_enabled = 0; + if (bat1_font_desc) + pango_font_description_free(bat1_font_desc); + if (bat2_font_desc) + pango_font_description_free(bat2_font_desc); + if (path_energy_now) + g_free(path_energy_now); + if (path_energy_full) + g_free(path_energy_full); + if (path_current_now) + g_free(path_current_now); + if (path_status) + g_free(path_status); + if (battery_low_cmd) + g_free(battery_low_cmd); - if((fp = fopen(path_energy_now, "r")) == NULL) { - fprintf(stderr, "ERROR: battery applet can't open energy_now\n"); - panel->battery.area.on_screen = 0; - continue; - } - fclose(fp); - if((fp = fopen(path_energy_full, "r")) == NULL) { - fprintf(stderr, "ERROR: battery applet can't open energy_full\n"); - panel->battery.area.on_screen = 0; - continue; - } - fclose(fp); - if((fp = fopen(path_current_now, "r")) == NULL) { - fprintf(stderr, "ERROR: battery applet can't open current_now\n"); - panel->battery.area.on_screen = 0; - continue; - } - fclose(fp); - if((fp = fopen(path_status, "r")) == NULL) { - fprintf(stderr, "ERROR: battery applet can't open status"); - panel->battery.area.on_screen = 0; - continue; - } - fclose(fp); + battery_low_cmd = path_energy_now = path_energy_full = path_current_now = path_status = 0; + bat1_font_desc = bat2_font_desc = 0; +} - update_battery(&battery_state); - snprintf(buf_bat_percentage, sizeof(buf_bat_percentage), "%d%%", battery_state.percentage); - snprintf(buf_bat_time, sizeof(buf_bat_time), "%02d:%02d", battery_state.time.hours, battery_state.time.minutes); - get_text_size(bat1_font_desc, &bat_percentage_height_ink, &bat_percentage_height, panel->area.height, buf_bat_percentage, strlen(buf_bat_percentage)); - get_text_size(bat2_font_desc, &bat_time_height_ink, &bat_time_height, panel->area.height, buf_bat_time, strlen(buf_bat_time)); +void init_battery_panel(void *p) +{ + Panel *panel = (Panel*)p; + Battery *battery = &panel->battery; + int bat_percentage_height, bat_percentage_height_ink, bat_time_height, bat_time_height_ink; + + if (!battery_enabled) + return; + + battery->area.parent = p; + battery->area.panel = p; + battery->area._draw_foreground = draw_battery; + battery->area._resize = resize_battery; + battery->area.resize = 1; + battery->area.redraw = 1; + battery->area.on_screen = 1; + + update_battery(&battery_state); + snprintf(buf_bat_percentage, sizeof(buf_bat_percentage), "%d%%", battery_state.percentage); + snprintf(buf_bat_time, sizeof(buf_bat_time), "%02d:%02d", battery_state.time.hours, battery_state.time.minutes); - if (panel_horizontal) { - // panel horizonal => fixed height and posy - battery->area.posy = panel->area.pix.border.width + panel->area.paddingy; - battery->area.height = panel->area.height - (2 * battery->area.posy); - } - else { - // panel vertical => fixed width, height, posy and posx - battery->area.posy = panel->clock.area.posy + panel->clock.area.height + panel->area.paddingx; - battery->area.height = (2 * battery->area.paddingxlr) + (bat_time_height + bat_percentage_height); - battery->area.posx = panel->area.pix.border.width + panel->area.paddingy; - battery->area.width = panel->area.width - (2 * panel->area.pix.border.width) - (2 * panel->area.paddingy); - } + get_text_size(bat1_font_desc, &bat_percentage_height_ink, &bat_percentage_height, panel->area.height, buf_bat_percentage, strlen(buf_bat_percentage)); + get_text_size(bat2_font_desc, &bat_time_height_ink, &bat_time_height, panel->area.height, buf_bat_time, strlen(buf_bat_time)); - battery->bat1_posy = (battery->area.height - bat_percentage_height) / 2; - battery->bat1_posy -= ((bat_time_height_ink + 2) / 2); - battery->bat2_posy = battery->bat1_posy + bat_percentage_height + 2 - (bat_percentage_height - bat_percentage_height_ink)/2 - (bat_time_height - bat_time_height_ink)/2; + if (panel_horizontal) { + // panel horizonal => fixed height and posy + battery->area.posy = panel->area.bg->border.width + panel->area.paddingy; + battery->area.height = panel->area.height - (2 * battery->area.posy); + } + else { + // panel vertical => fixed width, height, posy and posx + battery->area.posy = panel->clock.area.posy + panel->clock.area.height + panel->area.paddingx; + battery->area.height = (2 * battery->area.paddingxlr) + (bat_time_height + bat_percentage_height); + battery->area.posx = panel->area.bg->border.width + panel->area.paddingy; + battery->area.width = panel->area.width - (2 * panel->area.bg->border.width) - (2 * panel->area.paddingy); } + + battery->bat1_posy = (battery->area.height - bat_percentage_height) / 2; + battery->bat1_posy -= ((bat_time_height_ink + 2) / 2); + battery->bat2_posy = battery->bat1_posy + bat_percentage_height + 2 - (bat_percentage_height - bat_percentage_height_ink)/2 - (bat_time_height - bat_time_height_ink)/2; } @@ -171,37 +229,35 @@ int seconds = 0; int8_t new_percentage = 0; - fp = fopen(path_energy_now, "r"); + fp = fopen(path_status, "r"); if(fp != NULL) { - fgets(tmp, sizeof tmp, fp); - energy_now = atoi(tmp); + if (fgets(tmp, sizeof tmp, fp)) { + battery_state.state = BATTERY_UNKNOWN; + if(strcasecmp(tmp, "Charging\n")==0) battery_state.state = BATTERY_CHARGING; + if(strcasecmp(tmp, "Discharging\n")==0) battery_state.state = BATTERY_DISCHARGING; + if(strcasecmp(tmp, "Full\n")==0) battery_state.state = BATTERY_FULL; + } fclose(fp); } - fp = fopen(path_energy_full, "r"); + fp = fopen(path_energy_now, "r"); if(fp != NULL) { - fgets(tmp, sizeof tmp, fp); - energy_full = atoi(tmp); + if (fgets(tmp, sizeof tmp, fp)) energy_now = atoi(tmp); fclose(fp); } - fp = fopen(path_current_now, "r"); + fp = fopen(path_energy_full, "r"); if(fp != NULL) { - fgets(tmp, sizeof tmp, fp); - current_now = atoi(tmp); + if (fgets(tmp, sizeof tmp, fp)) energy_full = atoi(tmp); fclose(fp); } - fp = fopen(path_status, "r"); + fp = fopen(path_current_now, "r"); if(fp != NULL) { - fgets(tmp, sizeof tmp, fp); + if (fgets(tmp, sizeof tmp, fp)) current_now = atoi(tmp); fclose(fp); } - battery_state.state = BATTERY_UNKNOWN; - if(strcasecmp(tmp, "Charging\n")==0) battery_state.state = BATTERY_CHARGING; - if(strcasecmp(tmp, "Discharging\n")==0) battery_state.state = BATTERY_DISCHARGING; - if(current_now > 0) { switch(battery_state.state) { case BATTERY_CHARGING: @@ -225,16 +281,25 @@ if(energy_full > 0) new_percentage = (energy_now*100)/energy_full; - if(battery_low_status != 0 && battery_low_status == new_percentage && battery_state.percentage > new_percentage) { - //printf("battery low, executing: %s\n", battery_low_cmd); - if (battery_low_cmd) system(battery_low_cmd); + if(battery_low_status > new_percentage && battery_state.state == BATTERY_DISCHARGING && !battery_low_cmd_send) { + if (battery_low_cmd) + if (-1 != system(battery_low_cmd)) + battery_low_cmd_send = 1; + } + if(battery_low_status < new_percentage && battery_state.state == BATTERY_CHARGING && battery_low_cmd_send) { + battery_low_cmd_send = 0; } battery_state.percentage = new_percentage; + + // clamp percentage to 100 in case battery is misreporting that its current charge is more than its max + if(battery_state.percentage > 100) { + battery_state.percentage = 100; + } } -void draw_battery (void *obj, cairo_t *c, int active) +void draw_battery (void *obj, cairo_t *c) { Battery *battery = obj; PangoLayout *layout; @@ -268,7 +333,7 @@ void resize_battery(void *obj) { - Battery *battery = obj; + Battery *battery = obj; PangoLayout *layout; int percentage_width, time_width, new_width; @@ -276,7 +341,11 @@ battery->area.redraw = 1; snprintf(buf_bat_percentage, sizeof(buf_bat_percentage), "%d%%", battery_state.percentage); - snprintf(buf_bat_time, sizeof(buf_bat_time), "%02d:%02d", battery_state.time.hours, battery_state.time.minutes); + if(battery_state.state == BATTERY_FULL) { + strcpy(buf_bat_time, "Full"); + } else { + snprintf(buf_bat_time, sizeof(buf_bat_time), "%02d:%02d", battery_state.time.hours, battery_state.time.minutes); + } // vertical panel doen't adjust width if (!panel_horizontal) return; @@ -303,13 +372,13 @@ if(percentage_width > time_width) new_width = percentage_width; else new_width = time_width; - new_width += (2*battery->area.paddingxlr) + (2*battery->area.pix.border.width); + new_width += (2*battery->area.paddingxlr) + (2*battery->area.bg->border.width); int old_width = battery->area.width; Panel *panel = ((Area*)obj)->panel; battery->area.width = new_width + 1; - battery->area.posx = panel->area.width - battery->area.width - panel->area.paddingxlr - panel->area.pix.border.width; + battery->area.posx = panel->area.width - battery->area.width - panel->area.paddingxlr - panel->area.bg->border.width; if (panel->clock.area.on_screen) battery->area.posx -= (panel->clock.area.width + panel->area.paddingx); diff -Nru tint2-0.7.1/src/battery/battery.h tint2-0.9/src/battery/battery.h --- tint2-0.7.1/src/battery/battery.h 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/battery/battery.h 2010-01-19 19:29:28.000000000 +0000 @@ -17,19 +17,22 @@ #include "common.h" #include "area.h" + +// battery drawing parameter (per panel) typedef struct Battery { - // always start with area - Area area; + // always start with area + Area area; - config_color font; - int bat1_posy; - int bat2_posy; + Color font; + int bat1_posy; + int bat2_posy; } Battery; enum chargestate { BATTERY_UNKNOWN, BATTERY_CHARGING, - BATTERY_DISCHARGING + BATTERY_DISCHARGING, + BATTERY_FULL }; typedef struct battime { @@ -47,6 +50,8 @@ extern struct batstate battery_state; extern PangoFontDescription *bat1_font_desc; extern PangoFontDescription *bat2_font_desc; +extern int battery_enabled; +extern int percentage_hide; extern int8_t battery_low_status; extern char *battery_low_cmd; @@ -57,8 +62,10 @@ void update_battery(); void init_battery(); +void init_battery_panel(void *panel); +void cleanup_battery(); -void draw_battery(void *obj, cairo_t *c, int active); +void draw_battery(void *obj, cairo_t *c); void resize_battery(void *obj); diff -Nru tint2-0.7.1/src/clock/clock.c tint2-0.9/src/clock/clock.c --- tint2-0.7.1/src/clock/clock.c 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/clock/clock.c 2010-01-09 00:11:01.000000000 +0000 @@ -23,155 +23,209 @@ #include #include #include +#include +#include #include "window.h" #include "server.h" -#include "taskbar.h" -#include "panel.h" #include "area.h" +#include "panel.h" +#include "taskbar.h" #include "clock.h" +#include "timer.h" -char *time1_format; -char *time2_format; -char *clock_lclick_command; -char *clock_rclick_command; +char *time1_format=0; +char *time1_timezone=0; +char *time2_format=0; +char *time2_timezone=0; +char *time_tooltip_format=0; +char *time_tooltip_timezone=0; +char *clock_lclick_command=0; +char *clock_rclick_command=0; struct timeval time_clock; -int time_precision; -PangoFontDescription *time1_font_desc; -PangoFontDescription *time2_font_desc; +PangoFontDescription *time1_font_desc=0; +PangoFontDescription *time2_font_desc=0; static char buf_time[40]; static char buf_date[40]; +static char buf_tooltip[40]; +int clock_enabled; +static timeout* clock_timeout=0; + +void update_clocks(void* arg) +{ + gettimeofday(&time_clock, 0); + int i; + if (time1_format) { + for (i=0 ; i < nb_panel ; i++) + panel1[i].clock.area.resize = 1; + } + panel_refresh = 1; +} + +struct tm* clock_gettime_for_tz(const char* timezone) { + if (timezone) { + const char* old_tz = getenv("TZ"); + setenv("TZ", timezone, 1); + struct tm* result = localtime(&time_clock.tv_sec); + if (old_tz) setenv("TZ", old_tz, 1); + else unsetenv("TZ"); + return result; + } + else return localtime(&time_clock.tv_sec); +} -void init_precision() +const char* clock_get_tooltip(void* obj) { - if (!time1_format) time_precision = 60; - else if (strchr(time1_format, 'S')) time_precision = 1; - else if (strchr(time1_format, 'T')) time_precision = 1; - else if (strchr(time1_format, 'r')) time_precision = 1; - else time_precision = 60; + strftime(buf_tooltip, sizeof(buf_tooltip), time_tooltip_format, clock_gettime_for_tz(time_tooltip_timezone)); + return buf_tooltip; } void init_clock() { - Panel *panel; - Clock *clock; - int i, time_height, time_height_ink, date_height, date_height_ink; - - init_precision(); - // update clock to force update (-time_precision) - struct timeval stv; - gettimeofday(&stv, 0); - time_clock.tv_sec = stv.tv_sec - time_precision; - time_clock.tv_sec -= time_clock.tv_sec % time_precision; - - for (i=0 ; i < nb_panel ; i++) { - panel = &panel1[i]; - clock = &panel->clock; - - if (!clock->area.on_screen) continue; - - clock->area.parent = panel; - clock->area.panel = panel; - clock->area._draw_foreground = draw_clock; - clock->area._resize = resize_clock; - clock->area.resize = 1; - clock->area.redraw = 1; - - strftime(buf_time, sizeof(buf_time), time1_format, localtime(&time_clock.tv_sec)); - get_text_size(time1_font_desc, &time_height_ink, &time_height, panel->area.height, buf_time, strlen(buf_time)); - if (time2_format) { - strftime(buf_date, sizeof(buf_date), time2_format, localtime(&time_clock.tv_sec)); - get_text_size(time2_font_desc, &date_height_ink, &date_height, panel->area.height, buf_date, strlen(buf_date)); - } + if(time1_format && clock_timeout==0) { + if (strchr(time1_format, 'S') || strchr(time1_format, 'T') || strchr(time1_format, 'r')) + clock_timeout = add_timeout(10, 1000, update_clocks, 0); + else + clock_timeout = add_timeout(10, 60000, update_clocks, 0); + } +} - if (panel_horizontal) { - // panel horizonal => fixed height and posy - clock->area.posy = panel->area.pix.border.width + panel->area.paddingy; - clock->area.height = panel->area.height - (2 * clock->area.posy); - } - else { - // panel vertical => fixed width, height, posy and posx - clock->area.posy = panel->area.pix.border.width + panel->area.paddingxlr; - clock->area.height = (2 * clock->area.paddingxlr) + (time_height + date_height); - clock->area.posx = panel->area.pix.border.width + panel->area.paddingy; - clock->area.width = panel->area.width - (2 * panel->area.pix.border.width) - (2 * panel->area.paddingy); - } - clock->time1_posy = (clock->area.height - time_height) / 2; - if (time2_format) { - strftime(buf_date, sizeof(buf_date), time2_format, localtime(&time_clock.tv_sec)); - get_text_size(time2_font_desc, &date_height_ink, &date_height, panel->area.height, buf_date, strlen(buf_date)); +void init_clock_panel(void *p) +{ + Panel *panel =(Panel*)p; + Clock *clock = &panel->clock; + int time_height, time_height_ink, date_height, date_height_ink; + + clock->area.parent = p; + clock->area.panel = p; + clock->area._draw_foreground = draw_clock; + clock->area._resize = resize_clock; + clock->area.resize = 1; + clock->area.redraw = 1; + clock->area.on_screen = 1; - clock->time1_posy -= ((date_height_ink + 2) / 2); - clock->time2_posy = clock->time1_posy + time_height + 2 - (time_height - time_height_ink)/2 - (date_height - date_height_ink)/2; - } + strftime(buf_time, sizeof(buf_time), time1_format, clock_gettime_for_tz(time1_timezone)); + get_text_size(time1_font_desc, &time_height_ink, &time_height, panel->area.height, buf_time, strlen(buf_time)); + if (time2_format) { + strftime(buf_date, sizeof(buf_date), time2_format, clock_gettime_for_tz(time2_timezone)); + get_text_size(time2_font_desc, &date_height_ink, &date_height, panel->area.height, buf_date, strlen(buf_date)); + } + + if (panel_horizontal) { + // panel horizonal => fixed height and posy + clock->area.posy = panel->area.bg->border.width + panel->area.paddingy; + clock->area.height = panel->area.height - (2 * clock->area.posy); + } + else { + // panel vertical => fixed width, height, posy and posx + clock->area.posy = panel->area.bg->border.width + panel->area.paddingxlr; + clock->area.height = (2 * clock->area.paddingxlr) + (time_height + date_height); + clock->area.posx = panel->area.bg->border.width + panel->area.paddingy; + clock->area.width = panel->area.width - (2 * panel->area.bg->border.width) - (2 * panel->area.paddingy); + } + + clock->time1_posy = (clock->area.height - time_height) / 2; + if (time2_format) { + strftime(buf_date, sizeof(buf_date), time2_format, clock_gettime_for_tz(time2_timezone)); + get_text_size(time2_font_desc, &date_height_ink, &date_height, panel->area.height, buf_date, strlen(buf_date)); + + clock->time1_posy -= ((date_height_ink + 2) / 2); + clock->time2_posy = clock->time1_posy + time_height + 2 - (time_height - time_height_ink)/2 - (date_height - date_height_ink)/2; + } + + if (time_tooltip_format) { + clock->area._get_tooltip_text = clock_get_tooltip; + strftime(buf_tooltip, sizeof(buf_tooltip), time_tooltip_format, clock_gettime_for_tz(time_tooltip_timezone)); } } -void draw_clock (void *obj, cairo_t *c, int active) +void cleanup_clock() +{ + clock_enabled = 0; + if (time1_font_desc) + pango_font_description_free(time1_font_desc); + if (time2_font_desc) + pango_font_description_free(time2_font_desc); + g_free(time1_format); + g_free(time2_format); + g_free(time_tooltip_format); + g_free(time1_timezone); + g_free(time2_timezone); + g_free(time_tooltip_timezone); + g_free(clock_lclick_command); + g_free(clock_rclick_command); + time1_font_desc = time2_font_desc = 0; + time1_format = time2_format = time_tooltip_format = 0; + time1_timezone = time2_timezone = time_tooltip_timezone = 0; + clock_lclick_command = clock_rclick_command = 0; +} + + +void draw_clock (void *obj, cairo_t *c) { - Clock *clock = obj; - PangoLayout *layout; + Clock *clock = obj; + PangoLayout *layout; - layout = pango_cairo_create_layout (c); + layout = pango_cairo_create_layout (c); - // draw layout - pango_layout_set_font_description (layout, time1_font_desc); - pango_layout_set_width (layout, clock->area.width * PANGO_SCALE); - pango_layout_set_alignment (layout, PANGO_ALIGN_CENTER); - pango_layout_set_text (layout, buf_time, strlen(buf_time)); + // draw layout + pango_layout_set_font_description (layout, time1_font_desc); + pango_layout_set_width (layout, clock->area.width * PANGO_SCALE); + pango_layout_set_alignment (layout, PANGO_ALIGN_CENTER); + pango_layout_set_text (layout, buf_time, strlen(buf_time)); - cairo_set_source_rgba (c, clock->font.color[0], clock->font.color[1], clock->font.color[2], clock->font.alpha); + cairo_set_source_rgba (c, clock->font.color[0], clock->font.color[1], clock->font.color[2], clock->font.alpha); - pango_cairo_update_layout (c, layout); - cairo_move_to (c, 0, clock->time1_posy); - pango_cairo_show_layout (c, layout); + pango_cairo_update_layout (c, layout); + cairo_move_to (c, 0, clock->time1_posy); + pango_cairo_show_layout (c, layout); - if (time2_format) { - pango_layout_set_font_description (layout, time2_font_desc); - pango_layout_set_indent(layout, 0); - pango_layout_set_text (layout, buf_date, strlen(buf_date)); - pango_layout_set_width (layout, clock->area.width * PANGO_SCALE); + if (time2_format) { + pango_layout_set_font_description (layout, time2_font_desc); + pango_layout_set_indent(layout, 0); + pango_layout_set_text (layout, buf_date, strlen(buf_date)); + pango_layout_set_width (layout, clock->area.width * PANGO_SCALE); - pango_cairo_update_layout (c, layout); - cairo_move_to (c, 0, clock->time2_posy); - pango_cairo_show_layout (c, layout); - } + pango_cairo_update_layout (c, layout); + cairo_move_to (c, 0, clock->time2_posy); + pango_cairo_show_layout (c, layout); + } - g_object_unref (layout); + g_object_unref (layout); } void resize_clock (void *obj) { - Clock *clock = obj; - PangoLayout *layout; - int time_width, date_width, new_width; - - clock->area.redraw = 1; - time_width = date_width = 0; - strftime(buf_time, sizeof(buf_time), time1_format, localtime(&time_clock.tv_sec)); - if (time2_format) - strftime(buf_date, sizeof(buf_date), time2_format, localtime(&time_clock.tv_sec)); + Clock *clock = obj; + PangoLayout *layout; + int time_width, date_width, new_width; + + clock->area.redraw = 1; + time_width = date_width = 0; + strftime(buf_time, sizeof(buf_time), time1_format, clock_gettime_for_tz(time1_timezone)); + if (time2_format) + strftime(buf_date, sizeof(buf_date), time2_format, clock_gettime_for_tz(time2_timezone)); // vertical panel doen't adjust width if (!panel_horizontal) return; - //printf(" resize_clock\n"); - cairo_surface_t *cs; - cairo_t *c; + //printf(" resize_clock\n"); + cairo_surface_t *cs; + cairo_t *c; Pixmap pmap; pmap = XCreatePixmap (server.dsp, server.root_win, clock->area.width, clock->area.height, server.depth); - cs = cairo_xlib_surface_create (server.dsp, pmap, server.visual, clock->area.width, clock->area.height); - c = cairo_create (cs); - layout = pango_cairo_create_layout (c); + cs = cairo_xlib_surface_create (server.dsp, pmap, server.visual, clock->area.width, clock->area.height); + c = cairo_create (cs); + layout = pango_cairo_create_layout (c); - // check width + // check width pango_layout_set_font_description (layout, time1_font_desc); pango_layout_set_indent(layout, 0); pango_layout_set_text (layout, buf_time, strlen(buf_time)); @@ -185,30 +239,30 @@ if (time_width > date_width) new_width = time_width; else new_width = date_width; - new_width += (2*clock->area.paddingxlr) + (2*clock->area.pix.border.width); + new_width += (2*clock->area.paddingxlr) + (2*clock->area.bg->border.width); - if (new_width > clock->area.width || new_width < (clock->area.width-6)) { - Panel *panel = ((Area*)obj)->panel; + Panel *panel = ((Area*)obj)->panel; + clock->area.posx = panel->area.width - clock->area.width - panel->area.paddingxlr - panel->area.bg->border.width; - // resize clock - // we try to limit the number of resize - // printf("clock_width %d, new_width %d\n", clock->area.width, new_width); + if (new_width > clock->area.width || new_width < (clock->area.width-6)) { + // resize clock + // we try to limit the number of resize + // printf("clock_width %d, new_width %d\n", clock->area.width, new_width); clock->area.width = new_width + 1; - clock->area.posx = panel->area.width - clock->area.width - panel->area.paddingxlr - panel->area.pix.border.width; - // resize other objects on panel + // resize other objects on panel panel->area.resize = 1; #ifdef ENABLE_BATTERY panel->battery.area.resize = 1; #endif systray.area.resize = 1; panel_refresh = 1; - } + } - g_object_unref (layout); - cairo_destroy (c); - cairo_surface_destroy (cs); - XFreePixmap (server.dsp, pmap); + g_object_unref (layout); + cairo_destroy (c); + cairo_surface_destroy (cs); + XFreePixmap (server.dsp, pmap); } @@ -227,6 +281,10 @@ pid_t pid; pid = fork(); if (pid == 0) { + // change for the fork the signal mask +// sigset_t sigset; +// sigprocmask(SIG_SETMASK, &sigset, 0); +// sigprocmask(SIG_UNBLOCK, &sigset, 0); execl("/bin/sh", "/bin/sh", "-c", command, NULL); _exit(0); } diff -Nru tint2-0.7.1/src/clock/clock.h tint2-0.9/src/clock/clock.h --- tint2-0.7.1/src/clock/clock.h 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/clock/clock.h 2010-01-09 00:11:01.000000000 +0000 @@ -15,30 +15,34 @@ typedef struct Clock { - // always start with area - Area area; + // always start with area + Area area; - config_color font; - int time1_posy; - int time2_posy; + Color font; + int time1_posy; + int time2_posy; } Clock; extern char *time1_format; +extern char *time1_timezone; extern char *time2_format; -extern struct timeval time_clock; -extern int time_precision; +extern char *time2_timezone; +extern char *time_tooltip_format; +extern char *time_tooltip_timezone; extern PangoFontDescription *time1_font_desc; extern PangoFontDescription *time2_font_desc; extern char *clock_lclick_command; extern char *clock_rclick_command; +extern int clock_enabled; // initialize clock : y position, precision, ... void init_clock(); -void init_precision(); +void init_clock_panel(void *panel); +void cleanup_clock(); -void draw_clock (void *obj, cairo_t *c, int active); +void draw_clock (void *obj, cairo_t *c); void resize_clock (void *obj); diff -Nru tint2-0.7.1/src/config.c tint2-0.9/src/config.c --- tint2-0.7.1/src/config.c 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/config.c 2010-01-19 19:29:28.000000000 +0000 @@ -32,110 +32,99 @@ #include #include #include +#include #include #include "common.h" #include "server.h" +#include "panel.h" #include "task.h" #include "taskbar.h" #include "systraybar.h" #include "clock.h" -#include "panel.h" #include "config.h" #include "window.h" +#include "tooltip.h" +#include "timer.h" #ifdef ENABLE_BATTERY #include "battery.h" #endif +// global path +char *config_path = 0; +char *snapshot_path = 0; // -------------------------------------------------- // backward compatibility -static int save_file_config; static int old_task_icon_size; -static char *old_task_font; -static char *old_time1_font; -static char *old_time2_font; -static Area *area_task, *area_task_active; - -#ifdef ENABLE_BATTERY -static char *old_bat1_font; -static char *old_bat2_font; -#endif - -// temporary panel -static Panel *panel_config = 0; - -// temporary list of background -static GSList *list_back; +// detect if it's an old config file +// ==1 +static int old_config_file; void init_config() { - cleanup_panel(); - - // get monitor and desktop config - get_monitors_and_desktops(); + if (backgrounds) + g_array_free(backgrounds, 1); + backgrounds = g_array_new(0, 0, sizeof(Background)); + + // append full transparency background + Background transparent_bg; + memset(&transparent_bg, 0, sizeof(Background)); + g_array_append_val(backgrounds, transparent_bg); + + // tint2 could reload config, so we cleanup objects + cleanup_systray(); +#ifdef ENABLE_BATTERY + cleanup_battery(); +#endif + cleanup_clock(); + cleanup_tooltip(); + + // panel's default value + if (panel_config.g_task.font_desc) { + pango_font_description_free(panel_config.g_task.font_desc); + } + memset(&panel_config, 0, sizeof(Panel)); + int i; + for (i=0; inext) { - free(l0->data); - } - g_slist_free(list_back); - list_back = NULL; -} - - -void copy_file(const char *pathSrc, const char *pathDest) -{ - FILE *fileSrc, *fileDest; - char line[100]; - int nb; - - fileSrc = fopen(pathSrc, "rb"); - if (fileSrc == NULL) return; - - fileDest = fopen(pathDest, "wb"); - if (fileDest == NULL) return; - - while ((nb = fread(line, 1, 100, fileSrc)) > 0) fwrite(line, 1, nb, fileDest); - - fclose (fileDest); - fclose (fileSrc); } void extract_values (const char *value, char **value1, char **value2, char **value3) { - char *b=0, *c=0; + char *b=0, *c=0; - if (*value1) free (*value1); - if (*value2) free (*value2); - if (*value3) free (*value3); - - if ((b = strchr (value, ' '))) { - b[0] = '\0'; - b++; + if (*value1) free (*value1); + if (*value2) free (*value2); + if (*value3) free (*value3); + + if ((b = strchr (value, ' '))) { + b[0] = '\0'; + b++; } else { - *value2 = 0; - *value3 = 0; + *value2 = 0; + *value3 = 0; } *value1 = strdup (value); g_strstrip(*value1); @@ -160,586 +149,489 @@ } -int hex_char_to_int (char c) -{ - int r; - - if (c >= '0' && c <= '9') r = c - '0'; - else if (c >= 'a' && c <= 'f') r = c - 'a' + 10; - else if (c >= 'A' && c <= 'F') r = c - 'A' + 10; - else r = 0; - - return r; -} - - -int hex_to_rgb (char *hex, int *r, int *g, int *b) -{ - int len; - - if (hex == NULL || hex[0] != '#') return (0); - - len = strlen (hex); - if (len == 3 + 1) { - *r = hex_char_to_int (hex[1]); - *g = hex_char_to_int (hex[2]); - *b = hex_char_to_int (hex[3]); - } - else if (len == 6 + 1) { - *r = hex_char_to_int (hex[1]) * 16 + hex_char_to_int (hex[2]); - *g = hex_char_to_int (hex[3]) * 16 + hex_char_to_int (hex[4]); - *b = hex_char_to_int (hex[5]) * 16 + hex_char_to_int (hex[6]); - } - else if (len == 12 + 1) { - *r = hex_char_to_int (hex[1]) * 16 + hex_char_to_int (hex[2]); - *g = hex_char_to_int (hex[5]) * 16 + hex_char_to_int (hex[6]); - *b = hex_char_to_int (hex[9]) * 16 + hex_char_to_int (hex[10]); - } - else return 0; - - return 1; -} - - -void get_color (char *hex, double *rgb) +void get_action (char *event, int *action) { - int r, g, b; - hex_to_rgb (hex, &r, &g, &b); - - rgb[0] = (r / 255.0); - rgb[1] = (g / 255.0); - rgb[2] = (b / 255.0); + if (strcmp (event, "none") == 0) + *action = NONE; + else if (strcmp (event, "close") == 0) + *action = CLOSE; + else if (strcmp (event, "toggle") == 0) + *action = TOGGLE; + else if (strcmp (event, "iconify") == 0) + *action = ICONIFY; + else if (strcmp (event, "shade") == 0) + *action = SHADE; + else if (strcmp (event, "toggle_iconify") == 0) + *action = TOGGLE_ICONIFY; + else if (strcmp (event, "maximize_restore") == 0) + *action = MAXIMIZE_RESTORE; + else if (strcmp (event, "desktop_left") == 0) + *action = DESKTOP_LEFT; + else if (strcmp (event, "desktop_right") == 0) + *action = DESKTOP_RIGHT; + else if (strcmp (event, "next_task") == 0) + *action = NEXT_TASK; + else if (strcmp (event, "prev_task") == 0) + *action = PREV_TASK; } -void get_action (char *event, int *action) -{ - if (strcmp (event, "none") == 0) - *action = NONE; - else if (strcmp (event, "close") == 0) - *action = CLOSE; - else if (strcmp (event, "toggle") == 0) - *action = TOGGLE; - else if (strcmp (event, "iconify") == 0) - *action = ICONIFY; - else if (strcmp (event, "shade") == 0) - *action = SHADE; - else if (strcmp (event, "toggle_iconify") == 0) - *action = TOGGLE_ICONIFY; +int get_task_status(char* status) +{ + if (strcmp(status, "active") == 0) + return TASK_ACTIVE; + if (strcmp(status, "iconified") == 0) + return TASK_ICONIFIED; + if (strcmp(status, "urgent") == 0) + return TASK_URGENT; + return TASK_NORMAL; } void add_entry (char *key, char *value) { - char *value1=0, *value2=0, *value3=0; + char *value1=0, *value2=0, *value3=0; - /* Background and border */ - if (strcmp (key, "rounded") == 0) { - // 'rounded' is the first parameter => alloc a new background - Area *a = calloc(1, sizeof(Area)); - a->pix.border.rounded = atoi (value); - list_back = g_slist_append(list_back, a); - } - else if (strcmp (key, "border_width") == 0) { - Area *a = g_slist_last(list_back)->data; - a->pix.border.width = atoi (value); - } - else if (strcmp (key, "background_color") == 0) { - Area *a = g_slist_last(list_back)->data; - extract_values(value, &value1, &value2, &value3); - get_color (value1, a->pix.back.color); - if (value2) a->pix.back.alpha = (atoi (value2) / 100.0); - else a->pix.back.alpha = 0.5; - } - else if (strcmp (key, "border_color") == 0) { - Area *a = g_slist_last(list_back)->data; - extract_values(value, &value1, &value2, &value3); - get_color (value1, a->pix.border.color); - if (value2) a->pix.border.alpha = (atoi (value2) / 100.0); - else a->pix.border.alpha = 0.5; - } - - /* Panel */ - else if (strcmp (key, "panel_monitor") == 0) { - if (strcmp (value, "all") == 0) panel_config->monitor = -1; - else { - panel_config->monitor = atoi (value); - if (panel_config->monitor > 0) panel_config->monitor -= 1; - } - } - else if (strcmp (key, "panel_size") == 0) { - extract_values(value, &value1, &value2, &value3); + /* Background and border */ + if (strcmp (key, "rounded") == 0) { + // 'rounded' is the first parameter => alloc a new background + Background bg; + bg.border.rounded = atoi(value); + g_array_append_val(backgrounds, bg); + } + else if (strcmp (key, "border_width") == 0) { + g_array_index(backgrounds, Background, backgrounds->len-1).border.width = atoi(value); + } + else if (strcmp (key, "background_color") == 0) { + Background* bg = &g_array_index(backgrounds, Background, backgrounds->len-1); + extract_values(value, &value1, &value2, &value3); + get_color (value1, bg->back.color); + if (value2) bg->back.alpha = (atoi (value2) / 100.0); + else bg->back.alpha = 0.5; + } + else if (strcmp (key, "border_color") == 0) { + Background* bg = &g_array_index(backgrounds, Background, backgrounds->len-1); + extract_values(value, &value1, &value2, &value3); + get_color (value1, bg->border.color); + if (value2) bg->border.alpha = (atoi (value2) / 100.0); + else bg->border.alpha = 0.5; + } + + /* Panel */ + else if (strcmp (key, "panel_monitor") == 0) { + if (strcmp (value, "all") == 0) panel_config.monitor = -1; + else { + panel_config.monitor = atoi (value); + if (panel_config.monitor > 0) panel_config.monitor -= 1; + } + } + else if (strcmp (key, "panel_size") == 0) { + extract_values(value, &value1, &value2, &value3); char *b; if ((b = strchr (value1, '%'))) { b[0] = '\0'; - panel_config->pourcentx = 1; + panel_config.pourcentx = 1; } - panel_config->initial_width = atof(value1); - if (value2) { + panel_config.area.width = atoi(value1); + if (panel_config.area.width == 0) { + // full width mode + panel_config.area.width = 100; + panel_config.pourcentx = 1; + } + if (value2) { if ((b = strchr (value2, '%'))) { b[0] = '\0'; - panel_config->pourcenty = 1; + panel_config.pourcenty = 1; } - panel_config->initial_height = atof(value2); + panel_config.area.height = atoi(value2); } - } - else if (strcmp (key, "panel_margin") == 0) { - extract_values(value, &value1, &value2, &value3); - panel_config->marginx = atoi (value1); - if (value2) panel_config->marginy = atoi (value2); - } - else if (strcmp (key, "panel_padding") == 0) { - extract_values(value, &value1, &value2, &value3); - panel_config->area.paddingxlr = panel_config->area.paddingx = atoi (value1); - if (value2) panel_config->area.paddingy = atoi (value2); - if (value3) panel_config->area.paddingx = atoi (value3); - } - else if (strcmp (key, "panel_position") == 0) { - extract_values(value, &value1, &value2, &value3); - if (strcmp (value1, "top") == 0) panel_position = TOP; - else { + } + else if (strcmp (key, "panel_margin") == 0) { + extract_values(value, &value1, &value2, &value3); + panel_config.marginx = atoi (value1); + if (value2) panel_config.marginy = atoi (value2); + } + else if (strcmp (key, "panel_padding") == 0) { + extract_values(value, &value1, &value2, &value3); + panel_config.area.paddingxlr = panel_config.area.paddingx = atoi (value1); + if (value2) panel_config.area.paddingy = atoi (value2); + if (value3) panel_config.area.paddingx = atoi (value3); + } + else if (strcmp (key, "panel_position") == 0) { + extract_values(value, &value1, &value2, &value3); + if (strcmp (value1, "top") == 0) panel_position = TOP; + else { if (strcmp (value1, "bottom") == 0) panel_position = BOTTOM; else panel_position = CENTER; } - if (!value2) panel_position |= CENTER; - else { - if (strcmp (value2, "left") == 0) panel_position |= LEFT; - else { - if (strcmp (value2, "right") == 0) panel_position |= RIGHT; - else panel_position |= CENTER; - } - } - if (!value3) panel_horizontal = 1; - else { - if (strcmp (value3, "vertical") == 0) panel_horizontal = 0; - else panel_horizontal = 1; - } - } - else if (strcmp (key, "font_shadow") == 0) - panel_config->g_task.font_shadow = atoi (value); - else if (strcmp (key, "panel_background_id") == 0) { - int id = atoi (value); - Area *a = g_slist_nth_data(list_back, id); - memcpy(&panel_config->area.pix.back, &a->pix.back, sizeof(Color)); - memcpy(&panel_config->area.pix.border, &a->pix.border, sizeof(Border)); - } - else if (strcmp (key, "wm_menu") == 0) - wm_menu = atoi (value); - else if (strcmp (key, "urgent_nb_of_blink") == 0) - max_tick_urgent = (atoi (value) * 2) + 1; + if (!value2) panel_position |= CENTER; + else { + if (strcmp (value2, "left") == 0) panel_position |= LEFT; + else { + if (strcmp (value2, "right") == 0) panel_position |= RIGHT; + else panel_position |= CENTER; + } + } + if (!value3) panel_horizontal = 1; + else { + if (strcmp (value3, "vertical") == 0) panel_horizontal = 0; + else panel_horizontal = 1; + } + } + else if (strcmp (key, "font_shadow") == 0) + panel_config.g_task.font_shadow = atoi (value); + else if (strcmp (key, "panel_background_id") == 0) { + int id = atoi (value); + id = (id < backgrounds->len && id >= 0) ? id : 0; + panel_config.area.bg = &g_array_index(backgrounds, Background, id); + } + else if (strcmp (key, "wm_menu") == 0) + wm_menu = atoi (value); + else if (strcmp (key, "panel_dock") == 0) + panel_dock = atoi (value); + else if (strcmp (key, "urgent_nb_of_blink") == 0) + max_tick_urgent = (atoi (value) * 2) + 1; + else if (strcmp (key, "panel_layer") == 0) { + if (strcmp(value, "bottom") == 0) + panel_layer = BOTTOM_LAYER; + else if (strcmp(value, "normal") == 0) + panel_layer = NORMAL_LAYER; + else if (strcmp(value, "top") == 0) + panel_layer = TOP_LAYER; + } - /* Battery */ - else if (strcmp (key, "battery") == 0) { + /* Battery */ + else if (strcmp (key, "battery") == 0) { #ifdef ENABLE_BATTERY if(atoi(value) == 1) - panel_config->battery.area.on_screen = 1; + battery_enabled = 1; #else if(atoi(value) == 1) - printf("tint2 is build without battery support\n"); + fprintf(stderr, "tint2 is build without battery support\n"); #endif - } - else if (strcmp (key, "battery_low_status") == 0) { + } + else if (strcmp (key, "battery_low_status") == 0) { #ifdef ENABLE_BATTERY battery_low_status = atoi(value); if(battery_low_status < 0 || battery_low_status > 100) battery_low_status = 0; #endif - } - else if (strcmp (key, "battery_low_cmd") == 0) { + } + else if (strcmp (key, "battery_low_cmd") == 0) { #ifdef ENABLE_BATTERY - if (battery_low_cmd) g_free(battery_low_cmd); - if (strlen(value) > 0) battery_low_cmd = strdup (value); - else battery_low_cmd = 0; -#endif - } - else if (strcmp (key, "bat1_font") == 0) { -#ifdef ENABLE_BATTERY - if (save_file_config) old_bat1_font = strdup (value); - if (bat1_font_desc) pango_font_description_free(bat1_font_desc); - bat1_font_desc = pango_font_description_from_string (value); -#endif - } - else if (strcmp (key, "bat2_font") == 0) { -#ifdef ENABLE_BATTERY - if (save_file_config) old_bat2_font = strdup (value); - if (bat2_font_desc) pango_font_description_free(bat2_font_desc); - bat2_font_desc = pango_font_description_from_string (value); -#endif - } - else if (strcmp (key, "battery_font_color") == 0) { -#ifdef ENABLE_BATTERY - extract_values(value, &value1, &value2, &value3); - get_color (value1, panel_config->battery.font.color); - if (value2) panel_config->battery.font.alpha = (atoi (value2) / 100.0); - else panel_config->battery.font.alpha = 0.5; -#endif - } - else if (strcmp (key, "battery_padding") == 0) { -#ifdef ENABLE_BATTERY - extract_values(value, &value1, &value2, &value3); - panel_config->battery.area.paddingxlr = panel_config->battery.area.paddingx = atoi (value1); - if (value2) panel_config->battery.area.paddingy = atoi (value2); - if (value3) panel_config->battery.area.paddingx = atoi (value3); -#endif - } - else if (strcmp (key, "battery_background_id") == 0) { -#ifdef ENABLE_BATTERY - int id = atoi (value); - Area *a = g_slist_nth_data(list_back, id); - memcpy(&panel_config->battery.area.pix.back, &a->pix.back, sizeof(Color)); - memcpy(&panel_config->battery.area.pix.border, &a->pix.border, sizeof(Border)); -#endif - } - - /* Clock */ - else if (strcmp (key, "time1_format") == 0) { - if (time1_format) g_free(time1_format); - if (strlen(value) > 0) { - time1_format = strdup (value); - panel_config->clock.area.on_screen = 1; - } - else { - time1_format = 0; - panel_config->clock.area.on_screen = 0; - } - } - else if (strcmp (key, "time2_format") == 0) { - if (time2_format) g_free(time2_format); - if (strlen(value) > 0) time2_format = strdup (value); - else time2_format = 0; - } - else if (strcmp (key, "time1_font") == 0) { - if (save_file_config) old_time1_font = strdup (value); - if (time1_font_desc) pango_font_description_free(time1_font_desc); - time1_font_desc = pango_font_description_from_string (value); - } - else if (strcmp (key, "time2_font") == 0) { - if (save_file_config) old_time2_font = strdup (value); - if (time2_font_desc) pango_font_description_free(time2_font_desc); - time2_font_desc = pango_font_description_from_string (value); - } - else if (strcmp (key, "clock_font_color") == 0) { - extract_values(value, &value1, &value2, &value3); - get_color (value1, panel_config->clock.font.color); - if (value2) panel_config->clock.font.alpha = (atoi (value2) / 100.0); - else panel_config->clock.font.alpha = 0.5; - } - else if (strcmp (key, "clock_padding") == 0) { - extract_values(value, &value1, &value2, &value3); - panel_config->clock.area.paddingxlr = panel_config->clock.area.paddingx = atoi (value1); - if (value2) panel_config->clock.area.paddingy = atoi (value2); - if (value3) panel_config->clock.area.paddingx = atoi (value3); - } - else if (strcmp (key, "clock_background_id") == 0) { - int id = atoi (value); - Area *a = g_slist_nth_data(list_back, id); - memcpy(&panel_config->clock.area.pix.back, &a->pix.back, sizeof(Color)); - memcpy(&panel_config->clock.area.pix.border, &a->pix.border, sizeof(Border)); - } - else if (strcmp(key, "clock_lclick_command") == 0) { - if (clock_lclick_command) g_free(clock_lclick_command); - if (strlen(value) > 0) clock_lclick_command = strdup(value); - else clock_lclick_command = 0; + if (strlen(value) > 0) + battery_low_cmd = strdup (value); +#endif } - else if (strcmp(key, "clock_rclick_command") == 0) { - if (clock_rclick_command) g_free(clock_rclick_command); - if (strlen(value) > 0) clock_rclick_command = strdup(value); - else clock_rclick_command = 0; - } - - /* Taskbar */ - else if (strcmp (key, "taskbar_mode") == 0) { - if (strcmp (value, "multi_desktop") == 0) panel_mode = MULTI_DESKTOP; - else panel_mode = SINGLE_DESKTOP; - } - else if (strcmp (key, "taskbar_padding") == 0) { - extract_values(value, &value1, &value2, &value3); - panel_config->g_taskbar.paddingxlr = panel_config->g_taskbar.paddingx = atoi (value1); - if (value2) panel_config->g_taskbar.paddingy = atoi (value2); - if (value3) panel_config->g_taskbar.paddingx = atoi (value3); - } - else if (strcmp (key, "taskbar_background_id") == 0) { - int id = atoi (value); - Area *a = g_slist_nth_data(list_back, id); - memcpy(&panel_config->g_taskbar.pix.back, &a->pix.back, sizeof(Color)); - memcpy(&panel_config->g_taskbar.pix.border, &a->pix.border, sizeof(Border)); - } - - /* Task */ - else if (strcmp (key, "task_text") == 0) - panel_config->g_task.text = atoi (value); - else if (strcmp (key, "task_icon") == 0) - panel_config->g_task.icon = atoi (value); - else if (strcmp (key, "task_centered") == 0) - panel_config->g_task.centered = atoi (value); - else if (strcmp (key, "task_width") == 0) { - // old parameter : just for backward compatibility - panel_config->g_task.maximum_width = atoi (value); - panel_config->g_task.maximum_height = 30; + else if (strcmp (key, "bat1_font") == 0) { +#ifdef ENABLE_BATTERY + bat1_font_desc = pango_font_description_from_string (value); +#endif } - else if (strcmp (key, "task_maximum_size") == 0) { - extract_values(value, &value1, &value2, &value3); - panel_config->g_task.maximum_width = atoi (value1); - panel_config->g_task.maximum_height = 30; - if (value2) - panel_config->g_task.maximum_height = atoi (value2); + else if (strcmp (key, "bat2_font") == 0) { +#ifdef ENABLE_BATTERY + bat2_font_desc = pango_font_description_from_string (value); +#endif } - else if (strcmp (key, "task_padding") == 0) { - extract_values(value, &value1, &value2, &value3); - panel_config->g_task.area.paddingxlr = panel_config->g_task.area.paddingx = atoi (value1); - if (value2) panel_config->g_task.area.paddingy = atoi (value2); - if (value3) panel_config->g_task.area.paddingx = atoi (value3); - } - else if (strcmp (key, "task_font") == 0) { - if (save_file_config) old_task_font = strdup (value); - if (panel_config->g_task.font_desc) pango_font_description_free(panel_config->g_task.font_desc); - panel_config->g_task.font_desc = pango_font_description_from_string (value); - } - else if (strcmp (key, "task_font_color") == 0) { - extract_values(value, &value1, &value2, &value3); - get_color (value1, panel_config->g_task.font.color); - if (value2) panel_config->g_task.font.alpha = (atoi (value2) / 100.0); - else panel_config->g_task.font.alpha = 0.1; - } - else if (strcmp (key, "task_active_font_color") == 0) { - extract_values(value, &value1, &value2, &value3); - get_color (value1, panel_config->g_task.font_active.color); - if (value2) panel_config->g_task.font_active.alpha = (atoi (value2) / 100.0); - else panel_config->g_task.font_active.alpha = 0.1; - } - else if (strcmp (key, "task_background_id") == 0) { - int id = atoi (value); - Area *a = g_slist_nth_data(list_back, id); - memcpy(&panel_config->g_task.area.pix.back, &a->pix.back, sizeof(Color)); - memcpy(&panel_config->g_task.area.pix.border, &a->pix.border, sizeof(Border)); - } - else if (strcmp (key, "task_active_background_id") == 0) { - int id = atoi (value); - Area *a = g_slist_nth_data(list_back, id); - memcpy(&panel_config->g_task.area.pix_active.back, &a->pix.back, sizeof(Color)); - memcpy(&panel_config->g_task.area.pix_active.border, &a->pix.border, sizeof(Border)); - } - - /* Systray */ - else if (strcmp (key, "systray_padding") == 0) { - extract_values(value, &value1, &value2, &value3); - systray.area.paddingxlr = systray.area.paddingx = atoi (value1); - if (value2) systray.area.paddingy = atoi (value2); - if (value3) systray.area.paddingx = atoi (value3); - systray.area.on_screen = 1; - } - else if (strcmp (key, "systray_background_id") == 0) { - int id = atoi (value); - Area *a = g_slist_nth_data(list_back, id); - memcpy(&systray.area.pix.back, &a->pix.back, sizeof(Color)); - memcpy(&systray.area.pix.border, &a->pix.border, sizeof(Border)); - } - - /* Mouse actions */ - else if (strcmp (key, "mouse_middle") == 0) - get_action (value, &mouse_middle); - else if (strcmp (key, "mouse_right") == 0) - get_action (value, &mouse_right); - else if (strcmp (key, "mouse_scroll_up") == 0) - get_action (value, &mouse_scroll_up); - else if (strcmp (key, "mouse_scroll_down") == 0) - get_action (value, &mouse_scroll_down); - - - /* Read tint-0.6 config for backward compatibility */ - else if (strcmp (key, "panel_mode") == 0) { - save_file_config = 1; - if (strcmp (value, "single_desktop") == 0) panel_mode = SINGLE_DESKTOP; - else panel_mode = MULTI_DESKTOP; - } - else if (strcmp (key, "panel_rounded") == 0) { - Area *a = calloc(1, sizeof(Area)); - a->pix.border.rounded = atoi (value); - list_back = g_slist_append(list_back, a); - } - else if (strcmp (key, "panel_border_width") == 0) { - Area *a = g_slist_last(list_back)->data; - a->pix.border.width = atoi (value); - } - else if (strcmp (key, "panel_background_color") == 0) { - Area *a = g_slist_last(list_back)->data; - extract_values(value, &value1, &value2, &value3); - get_color (value1, a->pix.back.color); - if (value2) a->pix.back.alpha = (atoi (value2) / 100.0); - else a->pix.back.alpha = 0.5; - } - else if (strcmp (key, "panel_border_color") == 0) { - Area *a = g_slist_last(list_back)->data; - extract_values(value, &value1, &value2, &value3); - get_color (value1, a->pix.border.color); - if (value2) a->pix.border.alpha = (atoi (value2) / 100.0); - else a->pix.border.alpha = 0.5; - } - else if (strcmp (key, "task_text_centered") == 0) - panel_config->g_task.centered = atoi (value); - else if (strcmp (key, "task_margin") == 0) { - panel_config->g_taskbar.paddingxlr = 0; - panel_config->g_taskbar.paddingx = atoi (value); - } - else if (strcmp (key, "task_icon_size") == 0) - old_task_icon_size = atoi (value); - else if (strcmp (key, "task_rounded") == 0) { - area_task = calloc(1, sizeof(Area)); - area_task->pix.border.rounded = atoi (value); - list_back = g_slist_append(list_back, area_task); - - area_task_active = calloc(1, sizeof(Area)); - area_task_active->pix.border.rounded = atoi (value); - list_back = g_slist_append(list_back, area_task_active); - } - else if (strcmp (key, "task_background_color") == 0) { - extract_values(value, &value1, &value2, &value3); - get_color (value1, area_task->pix.back.color); - if (value2) area_task->pix.back.alpha = (atoi (value2) / 100.0); - else area_task->pix.back.alpha = 0.5; - } - else if (strcmp (key, "task_active_background_color") == 0) { - extract_values(value, &value1, &value2, &value3); - get_color (value1, area_task_active->pix.back.color); - if (value2) area_task_active->pix.back.alpha = (atoi (value2) / 100.0); - else area_task_active->pix.back.alpha = 0.5; - } - else if (strcmp (key, "task_border_width") == 0) { - area_task->pix.border.width = atoi (value); - area_task_active->pix.border.width = atoi (value); - } - else if (strcmp (key, "task_border_color") == 0) { - extract_values(value, &value1, &value2, &value3); - get_color (value1, area_task->pix.border.color); - if (value2) area_task->pix.border.alpha = (atoi (value2) / 100.0); - else area_task->pix.border.alpha = 0.5; - } - else if (strcmp (key, "task_active_border_color") == 0) { - extract_values(value, &value1, &value2, &value3); - get_color (value1, area_task_active->pix.border.color); - if (value2) area_task_active->pix.border.alpha = (atoi (value2) / 100.0); - else area_task_active->pix.border.alpha = 0.5; - } - - else - fprintf(stderr, "tint2 : invalid option \"%s\", correct your config file\n", key); - - if (value1) free (value1); - if (value2) free (value2); - if (value3) free (value3); -} - - -int parse_line (const char *line) -{ - char *a, *b, *key, *value; - - /* Skip useless lines */ - if ((line[0] == '#') || (line[0] == '\n')) return 0; - if (!(a = strchr (line, '='))) return 0; - - /* overwrite '=' with '\0' */ - a[0] = '\0'; - key = strdup (line); - a++; - - /* overwrite '\n' with '\0' if '\n' present */ - if ((b = strchr (a, '\n'))) b[0] = '\0'; - - value = strdup (a); - - g_strstrip(key); - g_strstrip(value); - - add_entry (key, value); - - free (key); - free (value); - return 1; -} - - -void config_finish () -{ - if (panel_config->monitor > (server.nb_monitor-1)) { - fprintf(stderr, "tint2 exit : monitor %d not found.\n", panel_config->monitor+1); - exit(0); - } - - // alloc panels - int i; - if (panel_config->monitor >= 0) { - // one monitor - nb_panel = 1; - panel1 = calloc(nb_panel, sizeof(Panel)); - memcpy(panel1, panel_config, sizeof(Panel)); - panel1->monitor = panel_config->monitor; + else if (strcmp (key, "battery_font_color") == 0) { +#ifdef ENABLE_BATTERY + extract_values(value, &value1, &value2, &value3); + get_color (value1, panel_config.battery.font.color); + if (value2) panel_config.battery.font.alpha = (atoi (value2) / 100.0); + else panel_config.battery.font.alpha = 0.5; +#endif } - else { - // all monitors - nb_panel = server.nb_monitor; - panel1 = calloc(nb_panel, sizeof(Panel)); - - for (i=0 ; i < nb_panel ; i++) { - memcpy(&panel1[i], panel_config, sizeof(Panel)); - panel1[i].monitor = i; - } + else if (strcmp (key, "battery_padding") == 0) { +#ifdef ENABLE_BATTERY + extract_values(value, &value1, &value2, &value3); + panel_config.battery.area.paddingxlr = panel_config.battery.area.paddingx = atoi (value1); + if (value2) panel_config.battery.area.paddingy = atoi (value2); + if (value3) panel_config.battery.area.paddingx = atoi (value3); +#endif } - - // TODO: user can configure layout => ordered objects in panel.area.list - // clock and systray before taskbar because resize(clock) can resize others object ?? - init_panel(); - init_clock(); + else if (strcmp (key, "battery_background_id") == 0) { #ifdef ENABLE_BATTERY - init_battery(); + int id = atoi (value); + id = (id < backgrounds->len && id >= 0) ? id : 0; + panel_config.battery.area.bg = &g_array_index(backgrounds, Background, id); #endif - init_systray(); - init_taskbar(); - visible_object(); + } + else if (strcmp (key, "battery_hide") == 0) { +#ifdef ENABLE_BATTERY + percentage_hide = atoi (value); + if (percentage_hide == 0) + percentage_hide = 101; +#endif + } - cleanup_config(); + /* Clock */ + else if (strcmp (key, "time1_format") == 0) { + if (strlen(value) > 0) { + time1_format = strdup (value); + clock_enabled = 1; + } + } + else if (strcmp (key, "time2_format") == 0) { + if (strlen(value) > 0) + time2_format = strdup (value); + } + else if (strcmp (key, "time1_font") == 0) { + time1_font_desc = pango_font_description_from_string (value); + } + else if (strcmp(key, "time1_timezone") == 0) { + if (strlen(value) > 0) + time1_timezone = strdup(value); + } + else if (strcmp(key, "time2_timezone") == 0) { + if (strlen(value) > 0) + time2_timezone = strdup(value); + } + else if (strcmp (key, "time2_font") == 0) { + time2_font_desc = pango_font_description_from_string (value); + } + else if (strcmp (key, "clock_font_color") == 0) { + extract_values(value, &value1, &value2, &value3); + get_color (value1, panel_config.clock.font.color); + if (value2) panel_config.clock.font.alpha = (atoi (value2) / 100.0); + else panel_config.clock.font.alpha = 0.5; + } + else if (strcmp (key, "clock_padding") == 0) { + extract_values(value, &value1, &value2, &value3); + panel_config.clock.area.paddingxlr = panel_config.clock.area.paddingx = atoi (value1); + if (value2) panel_config.clock.area.paddingy = atoi (value2); + if (value3) panel_config.clock.area.paddingx = atoi (value3); + } + else if (strcmp (key, "clock_background_id") == 0) { + int id = atoi (value); + id = (id < backgrounds->len && id >= 0) ? id : 0; + panel_config.clock.area.bg = &g_array_index(backgrounds, Background, id); + } + else if (strcmp(key, "clock_tooltip") == 0) { + if (strlen(value) > 0) + time_tooltip_format = strdup (value); + } + else if (strcmp(key, "clock_tooltip_timezone") == 0) { + if (strlen(value) > 0) + time_tooltip_timezone = strdup(value); + } + else if (strcmp(key, "clock_lclick_command") == 0) { + if (strlen(value) > 0) + clock_lclick_command = strdup(value); + } + else if (strcmp(key, "clock_rclick_command") == 0) { + if (strlen(value) > 0) + clock_rclick_command = strdup(value); + } - task_refresh_tasklist(); + /* Taskbar */ + else if (strcmp (key, "taskbar_mode") == 0) { + if (strcmp (value, "multi_desktop") == 0) panel_mode = MULTI_DESKTOP; + else panel_mode = SINGLE_DESKTOP; + } + else if (strcmp (key, "taskbar_padding") == 0) { + extract_values(value, &value1, &value2, &value3); + panel_config.g_taskbar.area.paddingxlr = panel_config.g_taskbar.area.paddingx = atoi (value1); + if (value2) panel_config.g_taskbar.area.paddingy = atoi (value2); + if (value3) panel_config.g_taskbar.area.paddingx = atoi (value3); + } + else if (strcmp (key, "taskbar_background_id") == 0) { + int id = atoi (value); + id = (id < backgrounds->len && id >= 0) ? id : 0; + panel_config.g_taskbar.bg = &g_array_index(backgrounds, Background, id); + panel_config.g_taskbar.area.bg = panel_config.g_taskbar.bg; + } + else if (strcmp (key, "taskbar_active_background_id") == 0) { + int id = atoi (value); + id = (id < backgrounds->len && id >= 0) ? id : 0; + panel_config.g_taskbar.bg_active = &g_array_index(backgrounds, Background, id); + panel_config.g_taskbar.use_active = 1; + } + + /* Task */ + else if (strcmp (key, "task_text") == 0) + panel_config.g_task.text = atoi (value); + else if (strcmp (key, "task_icon") == 0) + panel_config.g_task.icon = atoi (value); + else if (strcmp (key, "task_centered") == 0) + panel_config.g_task.centered = atoi (value); + else if (strcmp (key, "task_width") == 0) { + // old parameter : just for backward compatibility + panel_config.g_task.maximum_width = atoi (value); + panel_config.g_task.maximum_height = 30; + } + else if (strcmp (key, "task_maximum_size") == 0) { + extract_values(value, &value1, &value2, &value3); + panel_config.g_task.maximum_width = atoi (value1); + panel_config.g_task.maximum_height = 30; + if (value2) + panel_config.g_task.maximum_height = atoi (value2); + } + else if (strcmp (key, "task_padding") == 0) { + extract_values(value, &value1, &value2, &value3); + panel_config.g_task.area.paddingxlr = panel_config.g_task.area.paddingx = atoi (value1); + if (value2) panel_config.g_task.area.paddingy = atoi (value2); + if (value3) panel_config.g_task.area.paddingx = atoi (value3); + } + else if (strcmp (key, "task_font") == 0) { + panel_config.g_task.font_desc = pango_font_description_from_string (value); + } + else if (g_regex_match_simple("task.*_font_color", key, 0, 0)) { + gchar** split = g_regex_split_simple("_", key, 0, 0); + int status = get_task_status(split[1]); + g_strfreev(split); + extract_values(value, &value1, &value2, &value3); + float alpha = 1; + if (value2) alpha = (atoi (value2) / 100.0); + get_color (value1, panel_config.g_task.font[status].color); + panel_config.g_task.font[status].alpha = alpha; + panel_config.g_task.config_font_mask |= (1<len && id >= 0) ? id : 0; + panel_config.g_task.background[status] = &g_array_index(backgrounds, Background, id); + panel_config.g_task.config_background_mask |= (1<len && id >= 0) ? id : 0; + systray.area.bg = &g_array_index(backgrounds, Background, id); + } + else if (strcmp(key, "systray_sort") == 0) { + if (strcmp(value, "descending") == 0) + systray.sort = -1; + else if (strcmp(value, "ascending") == 0) + systray.sort = 1; + else if (strcmp(value, "left2right") == 0) + systray.sort = 2; + else if (strcmp(value, "right2left") == 0) + systray.sort = 3; + } + else if (strcmp(key, "systray_icon_size") == 0) { + systray_max_icon_size = atoi(value); + } + else if (strcmp(key, "systray_icon_asb") == 0) { + extract_values(value, &value1, &value2, &value3); + systray.alpha = atoi(value1); + systray.saturation = atoi(value2); + systray.brightness = atoi(value3); + } + + /* Tooltip */ + else if (strcmp (key, "tooltip") == 0) + g_tooltip.enabled = atoi(value); + else if (strcmp (key, "tooltip_show_timeout") == 0) { + int timeout_msec = 1000*atof(value); + g_tooltip.show_timeout_msec = timeout_msec; + } + else if (strcmp (key, "tooltip_hide_timeout") == 0) { + int timeout_msec = 1000*atof(value); + g_tooltip.hide_timeout_msec = timeout_msec; + } + else if (strcmp (key, "tooltip_padding") == 0) { + extract_values(value, &value1, &value2, &value3); + if (value1) g_tooltip.paddingx = atoi(value1); + if (value2) g_tooltip.paddingy = atoi(value2); + } + else if (strcmp (key, "tooltip_background_id") == 0) { + int id = atoi (value); + id = (id < backgrounds->len && id >= 0) ? id : 0; + g_tooltip.bg = &g_array_index(backgrounds, Background, id); + } + else if (strcmp (key, "tooltip_font_color") == 0) { + extract_values(value, &value1, &value2, &value3); + get_color(value1, g_tooltip.font_color.color); + if (value2) g_tooltip.font_color.alpha = (atoi (value2) / 100.0); + else g_tooltip.font_color.alpha = 0.1; + } + else if (strcmp (key, "tooltip_font") == 0) { + g_tooltip.font_desc = pango_font_description_from_string(value); + } + + /* Mouse actions */ + else if (strcmp (key, "mouse_middle") == 0) + get_action (value, &mouse_middle); + else if (strcmp (key, "mouse_right") == 0) + get_action (value, &mouse_right); + else if (strcmp (key, "mouse_scroll_up") == 0) + get_action (value, &mouse_scroll_up); + else if (strcmp (key, "mouse_scroll_down") == 0) + get_action (value, &mouse_scroll_down); + + /* autohide options */ + else if (strcmp(key, "autohide") == 0) + panel_autohide = atoi(value); + else if (strcmp(key, "autohide_show_timeout") == 0) + panel_autohide_show_timeout = 1000*atof(value); + else if (strcmp(key, "autohide_hide_timeout") == 0) + panel_autohide_hide_timeout = 1000*atof(value); + else if (strcmp(key, "strut_policy") == 0) { + if (strcmp(value, "follow_size") == 0) + panel_strut_policy = STRUT_FOLLOW_SIZE; + else + panel_strut_policy = STRUT_MINIMUM; + } + else if (strcmp(key, "autohide_height") == 0) + panel_autohide_height = atoi(value); + + else + fprintf(stderr, "tint2 : invalid option \"%s\", correct your config file\n", key); + + if (value1) free (value1); + if (value2) free (value2); + if (value3) free (value3); } int config_read () { - const gchar * const * system_dirs; - char *path1; - gint i; - - save_file_config = 0; - - // follow XDG specification -deb: - // check tint2rc in user directory - path1 = g_build_filename (g_get_user_config_dir(), "tint2", "tint2rc", NULL); - if (g_file_test (path1, G_FILE_TEST_EXISTS)) { + const gchar * const * system_dirs; + char *path1; + gint i; + + // follow XDG specification + // check tint2rc in user directory + path1 = g_build_filename (g_get_user_config_dir(), "tint2", "tint2rc", NULL); + if (g_file_test (path1, G_FILE_TEST_EXISTS)) { i = config_read_file (path1); + config_path = strdup(path1); g_free(path1); - return i; + return i; } - g_free(path1); - if (save_file_config) { - fprintf(stderr, "tint2 exit : enable to write $HOME/.config/tint2/tint2rc\n"); - exit(0); - } - - // check old tintrc config file - path1 = g_build_filename (g_get_user_config_dir(), "tint", "tintrc", NULL); - if (g_file_test (path1, G_FILE_TEST_EXISTS)) { - save_file_config = 1; - config_read_file (path1); - g_free(path1); - goto deb; - } // copy tint2rc from system directory to user directory - g_free(path1); char *path2 = 0; system_dirs = g_get_system_config_dirs(); for (i = 0; system_dirs[i]; i++) { @@ -761,6 +653,7 @@ g_free(path2); i = config_read_file (path1); + config_path = strdup(path1); g_free(path1); return i; } @@ -770,183 +663,26 @@ int config_read_file (const char *path) { - FILE *fp; - char line[80]; - - if ((fp = fopen(path, "r")) == NULL) return 0; - old_task_font = 0; - old_time1_font = 0; - old_time2_font = 0; - - while (fgets(line, sizeof(line), fp) != NULL) - parse_line (line); - - fclose (fp); - - if (save_file_config) - save_config(); - - if (old_task_font) { - g_free(old_task_font); - old_task_font = 0; - } - if (old_time1_font) { - g_free(old_time1_font); - old_time1_font = 0; - } - if (old_time2_font) { - g_free(old_time2_font); - old_time2_font = 0; + FILE *fp; + char line[512]; + char *key, *value; + + if ((fp = fopen(path, "r")) == NULL) return 0; + + while (fgets(line, sizeof(line), fp) != NULL) { + if (parse_line(line, &key, &value)) { + add_entry (key, value); + free (key); + free (value); + } } - return 1; -} - - -void save_config () -{ - fprintf(stderr, "tint2 : convert user's config file\n"); - - char *path, *dir; - FILE *fp; + fclose (fp); if (old_task_icon_size) { - panel_config->g_task.area.paddingy = ((int)panel_config->initial_height - (2 * panel_config->area.paddingy) - old_task_icon_size) / 2; + panel_config.g_task.area.paddingy = ((int)panel_config.area.height - (2 * panel_config.area.paddingy) - old_task_icon_size) / 2; } + return 1; +} - dir = g_build_filename (g_get_user_config_dir(), "tint2", NULL); - if (!g_file_test (dir, G_FILE_TEST_IS_DIR)) g_mkdir(dir, 0777); - g_free(dir); - - path = g_build_filename (g_get_user_config_dir(), "tint2", "tint2rc", NULL); - fp = fopen(path, "w"); - g_free(path); - if (fp == NULL) return; - - fputs("#---------------------------------------------\n", fp); - fputs("# TINT2 CONFIG FILE\n", fp); - fputs("#---------------------------------------------\n\n", fp); - fputs("#---------------------------------------------\n", fp); - fputs("# BACKGROUND AND BORDER\n", fp); - fputs("#---------------------------------------------\n", fp); - GSList *l0; - Area *a; - l0 = list_back->next; - while (l0) { - a = l0->data; - fprintf(fp, "rounded = %d\n", a->pix.border.rounded); - fprintf(fp, "border_width = %d\n", a->pix.border.width); - fprintf(fp, "background_color = #%02x%02x%02x %d\n", (int)(a->pix.back.color[0]*255), (int)(a->pix.back.color[1]*255), (int)(a->pix.back.color[2]*255), (int)(a->pix.back.alpha*100)); - fprintf(fp, "border_color = #%02x%02x%02x %d\n\n", (int)(a->pix.border.color[0]*255), (int)(a->pix.border.color[1]*255), (int)(a->pix.border.color[2]*255), (int)(a->pix.border.alpha*100)); - - l0 = l0->next; - } - - fputs("#---------------------------------------------\n", fp); - fputs("# PANEL\n", fp); - fputs("#---------------------------------------------\n", fp); - fputs("panel_monitor = all\n", fp); - if (panel_position & BOTTOM) fputs("panel_position = bottom", fp); - else fputs("panel_position = top", fp); - if (panel_position & LEFT) fputs(" left horizontal\n", fp); - else if (panel_position & RIGHT) fputs(" right horizontal\n", fp); - else fputs(" center horizontal\n", fp); - fprintf(fp, "panel_size = %d %d\n", (int)panel_config->initial_width, (int)panel_config->initial_height); - fprintf(fp, "panel_margin = %d %d\n", panel_config->marginx, panel_config->marginy); - fprintf(fp, "panel_padding = %d %d %d\n", panel_config->area.paddingxlr, panel_config->area.paddingy, panel_config->area.paddingx); - fprintf(fp, "font_shadow = %d\n", panel_config->g_task.font_shadow); - fputs("panel_background_id = 1\n", fp); - fputs("wm_menu = 0\n", fp); - - fputs("\n#---------------------------------------------\n", fp); - fputs("# TASKBAR\n", fp); - fputs("#---------------------------------------------\n", fp); - if (panel_mode == MULTI_DESKTOP) fputs("taskbar_mode = multi_desktop\n", fp); - else fputs("taskbar_mode = single_desktop\n", fp); - fprintf(fp, "taskbar_padding = 0 0 %d\n", panel_config->g_taskbar.paddingx); - fputs("taskbar_background_id = 0\n", fp); - - fputs("\n#---------------------------------------------\n", fp); - fputs("# TASK\n", fp); - fputs("#---------------------------------------------\n", fp); - if (old_task_icon_size) fputs("task_icon = 1\n", fp); - else fputs("task_icon = 0\n", fp); - fputs("task_text = 1\n", fp); - fprintf(fp, "task_maximum_size = %d %d\n", panel_config->g_task.maximum_width, panel_config->g_task.maximum_height); - fprintf(fp, "task_centered = %d\n", panel_config->g_task.centered); - fprintf(fp, "task_padding = %d %d\n", panel_config->g_task.area.paddingx, panel_config->g_task.area.paddingy); - fprintf(fp, "task_font = %s\n", old_task_font); - fprintf(fp, "task_font_color = #%02x%02x%02x %d\n", (int)(panel_config->g_task.font.color[0]*255), (int)(panel_config->g_task.font.color[1]*255), (int)(panel_config->g_task.font.color[2]*255), (int)(panel_config->g_task.font.alpha*100)); - fprintf(fp, "task_active_font_color = #%02x%02x%02x %d\n", (int)(panel_config->g_task.font_active.color[0]*255), (int)(panel_config->g_task.font_active.color[1]*255), (int)(panel_config->g_task.font_active.color[2]*255), (int)(panel_config->g_task.font_active.alpha*100)); - fputs("task_background_id = 2\n", fp); - fputs("task_active_background_id = 3\n", fp); - - fputs("\n#---------------------------------------------\n", fp); - fputs("# SYSTRAYBAR\n", fp); - fputs("#---------------------------------------------\n", fp); - fputs("systray_padding = 4 3 4\n", fp); - fputs("systray_background_id = 0\n", fp); - - fputs("\n#---------------------------------------------\n", fp); - fputs("# CLOCK\n", fp); - fputs("#---------------------------------------------\n", fp); - if (time1_format) fprintf(fp, "time1_format = %s\n", time1_format); - else fputs("#time1_format = %H:%M\n", fp); - fprintf(fp, "time1_font = %s\n", old_time1_font); - if (time2_format) fprintf(fp, "time2_format = %s\n", time2_format); - else fputs("#time2_format = %A %d %B\n", fp); - fprintf(fp, "time2_font = %s\n", old_time2_font); - fprintf(fp, "clock_font_color = #%02x%02x%02x %d\n", (int)(panel_config->clock.font.color[0]*255), (int)(panel_config->clock.font.color[1]*255), (int)(panel_config->clock.font.color[2]*255), (int)(panel_config->clock.font.alpha*100)); - fputs("clock_padding = 2 2\n", fp); - fputs("clock_background_id = 0\n", fp); - fputs("#clock_lclick_command = xclock\n", fp); - fputs("clock_rclick_command = orage\n", fp); - -#ifdef ENABLE_BATTERY - fputs("\n#---------------------------------------------\n", fp); - fputs("# BATTERY\n", fp); - fputs("#---------------------------------------------\n", fp); - fprintf(fp, "battery = %d\n", panel_config->battery.area.on_screen); - fprintf(fp, "battery_low_status = %d\n", battery_low_status); - fprintf(fp, "battery_low_cmd = %s\n", battery_low_cmd); - fprintf(fp, "bat1_font = %s\n", old_bat1_font); - fprintf(fp, "bat2_font = %s\n", old_bat2_font); - fprintf(fp, "battery_font_color = #%02x%02x%02x %d\n", (int)(panel_config->battery.font.color[0]*255), (int)(panel_config->battery.font.color[1]*255), (int)(panel_config->battery.font.color[2]*255), (int)(panel_config->battery.font.alpha*100)); - fputs("battery_padding = 2 2\n", fp); - fputs("battery_background_id = 0\n", fp); -#endif - - fputs("\n#---------------------------------------------\n", fp); - fputs("# MOUSE ACTION ON TASK\n", fp); - fputs("#---------------------------------------------\n", fp); - if (mouse_middle == NONE) fputs("mouse_middle = none\n", fp); - else if (mouse_middle == CLOSE) fputs("mouse_middle = close\n", fp); - else if (mouse_middle == TOGGLE) fputs("mouse_middle = toggle\n", fp); - else if (mouse_middle == ICONIFY) fputs("mouse_middle = iconify\n", fp); - else if (mouse_middle == SHADE) fputs("mouse_middle = shade\n", fp); - else fputs("mouse_middle = toggle_iconify\n", fp); - - if (mouse_right == NONE) fputs("mouse_right = none\n", fp); - else if (mouse_right == CLOSE) fputs("mouse_right = close\n", fp); - else if (mouse_right == TOGGLE) fputs("mouse_right = toggle\n", fp); - else if (mouse_right == ICONIFY) fputs("mouse_right = iconify\n", fp); - else if (mouse_right == SHADE) fputs("mouse_right = shade\n", fp); - else fputs("mouse_right = toggle_iconify\n", fp); - - if (mouse_scroll_up == NONE) fputs("mouse_scroll_up = none\n", fp); - else if (mouse_scroll_up == CLOSE) fputs("mouse_scroll_up = close\n", fp); - else if (mouse_scroll_up == TOGGLE) fputs("mouse_scroll_up = toggle\n", fp); - else if (mouse_scroll_up == ICONIFY) fputs("mouse_scroll_up = iconify\n", fp); - else if (mouse_scroll_up == SHADE) fputs("mouse_scroll_up = shade\n", fp); - else fputs("mouse_scroll_up = toggle_iconify\n", fp); - - if (mouse_scroll_down == NONE) fputs("mouse_scroll_down = none\n", fp); - else if (mouse_scroll_down == CLOSE) fputs("mouse_scroll_down = close\n", fp); - else if (mouse_scroll_down == TOGGLE) fputs("mouse_scroll_down = toggle\n", fp); - else if (mouse_scroll_down == ICONIFY) fputs("mouse_scroll_down = iconify\n", fp); - else if (mouse_scroll_down == SHADE) fputs("mouse_scroll_down = shade\n", fp); - else fputs("mouse_scroll_down = toggle_iconify\n", fp); - fputs("\n\n", fp); - fclose (fp); -} diff -Nru tint2-0.7.1/src/config.h tint2-0.9/src/config.h --- tint2-0.7.1/src/config.h 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/config.h 2009-11-10 21:11:31.000000000 +0000 @@ -9,12 +9,13 @@ #ifndef CONFIG_H #define CONFIG_H +extern char *config_path; +extern char *snapshot_path; void init_config(); void cleanup_config(); int config_read_file (const char *path); int config_read (); -void config_finish (); -void save_config (); #endif + diff -Nru tint2-0.7.1/src/Makefile.am tint2-0.9/src/Makefile.am --- tint2-0.7.1/src/Makefile.am 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/Makefile.am 2010-01-15 20:09:35.000000000 +0000 @@ -1,18 +1,21 @@ -AM_CFLAGS = -Wall -AM_CFLAGS += @PANGOCAIRO_CFLAGS@ @PANGO_CFLAGS@ @CAIRO_CFLAGS@ @GLIB2_CFLAGS@ @GOBJECT2_CFLAGS@ @X11_CFLAGS@ @XINERAMA_CFLAGS@ @IMLIB2_CFLAGS@ - -AM_LDFLAGS = -Wl,--as-needed +if ENABLE_TINT2CONF +SUBDIRS = tint2conf +endif -LIBS = @PANGOCAIRO_LIBS@ @PANGO_LIBS@ @CAIRO_LIBS@ @GLIB2_LIBS@ @GOBJECT2_LIBS@ @X11_LIBS@ @XINERAMA_LIBS@ @IMLIB2_LIBS@ -INCLUDES = -Iutil -Iclock -Itaskbar -Isystray +AM_CFLAGS += @PANGOCAIRO_CFLAGS@ @PANGO_CFLAGS@ @CAIRO_CFLAGS@ @GLIB2_CFLAGS@ @GOBJECT2_CFLAGS@ @X11_CFLAGS@ @XINERAMA_CFLAGS@ @IMLIB2_CFLAGS@ +LIBS = @PANGOCAIRO_LIBS@ @PANGO_LIBS@ @CAIRO_LIBS@ @GLIB2_LIBS@ @GOBJECT2_LIBS@ @X11_LIBS@ @XINERAMA_LIBS@ @IMLIB2_LIBS@ -lrt +INCLUDES = -Iutil -Iclock -Itaskbar -Isystray -Itooltip bin_PROGRAMS = tint2 tint2_SOURCES = config.c \ util/area.h \ util/common.h \ + util/common.c \ util/area.c \ util/window.h \ util/window.c \ + util/timer.h \ + util/timer.c \ panel.h \ clock/clock.c \ clock/clock.h \ @@ -26,15 +29,15 @@ taskbar/taskbar.c \ taskbar/task.c \ taskbar/taskbar.h \ - taskbar/task.h + taskbar/task.h \ + tooltip/tooltip.c \ + tooltip/tooltip.h \ + version.h if ENABLE_BATTERY -AM_CFLAGS += -DENABLE_BATTERY +DEFS += -DENABLE_BATTERY INCLUDES += -Ibattery tint2_SOURCES += battery/battery.c \ battery/battery.h endif -DISTCLEANFILES = Makefile.in - - diff -Nru tint2-0.7.1/src/Makefile.in tint2-0.9/src/Makefile.in --- tint2-0.7.1/src/Makefile.in 2009-07-22 17:47:17.000000000 +0100 +++ tint2-0.9/src/Makefile.in 2010-01-28 11:16:45.000000000 +0000 @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -16,8 +17,9 @@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -30,8 +32,6 @@ NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ bin_PROGRAMS = tint2$(EXEEXT) @ENABLE_BATTERY_TRUE@am__append_1 = -DENABLE_BATTERY @ENABLE_BATTERY_TRUE@am__append_2 = -Ibattery @@ -39,53 +39,91 @@ @ENABLE_BATTERY_TRUE@ battery/battery.h subdir = src -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(srcdir)/version.h.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = +CONFIG_CLEAN_FILES = version.h +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am__tint2_SOURCES_DIST = config.c util/area.h util/common.h \ - util/area.c util/window.h util/window.c panel.h clock/clock.c \ - clock/clock.h config.h tint.c panel.c server.c server.h \ - systray/systraybar.h systray/systraybar.c taskbar/taskbar.c \ - taskbar/task.c taskbar/taskbar.h taskbar/task.h \ - battery/battery.c battery/battery.h + util/common.c util/area.c util/window.h util/window.c \ + util/timer.h util/timer.c panel.h clock/clock.c clock/clock.h \ + config.h tint.c panel.c server.c server.h systray/systraybar.h \ + systray/systraybar.c taskbar/taskbar.c taskbar/task.c \ + taskbar/taskbar.h taskbar/task.h tooltip/tooltip.c \ + tooltip/tooltip.h version.h battery/battery.c \ + battery/battery.h @ENABLE_BATTERY_TRUE@am__objects_1 = battery.$(OBJEXT) -am_tint2_OBJECTS = config.$(OBJEXT) area.$(OBJEXT) window.$(OBJEXT) \ - clock.$(OBJEXT) tint.$(OBJEXT) panel.$(OBJEXT) \ - server.$(OBJEXT) systraybar.$(OBJEXT) taskbar.$(OBJEXT) \ - task.$(OBJEXT) $(am__objects_1) +am_tint2_OBJECTS = config.$(OBJEXT) common.$(OBJEXT) area.$(OBJEXT) \ + window.$(OBJEXT) timer.$(OBJEXT) clock.$(OBJEXT) \ + tint.$(OBJEXT) panel.$(OBJEXT) server.$(OBJEXT) \ + systraybar.$(OBJEXT) taskbar.$(OBJEXT) task.$(OBJEXT) \ + tooltip.$(OBJEXT) $(am__objects_1) tint2_OBJECTS = $(am_tint2_OBJECTS) tint2_LDADD = $(LDADD) DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(tint2_SOURCES) DIST_SOURCES = $(am__tint2_SOURCES_DIST) +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir ETAGS = etags CTAGS = ctags +DIST_SUBDIRS = tint2conf DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ -AR = @AR@ +AM_CFLAGS = @AM_CFLAGS@ @PANGOCAIRO_CFLAGS@ @PANGO_CFLAGS@ \ + @CAIRO_CFLAGS@ @GLIB2_CFLAGS@ @GOBJECT2_CFLAGS@ @X11_CFLAGS@ \ + @XINERAMA_CFLAGS@ @IMLIB2_CFLAGS@ $(am__empty) +AM_LDFLAGS = @AM_LDFLAGS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ @@ -98,16 +136,14 @@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ +DEFS = @DEFS@ $(am__append_1) DEPDIR = @DEPDIR@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ +DISTCLEANFILES = @DISTCLEANFILES@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -FGREP = @FGREP@ GLIB2_CFLAGS = @GLIB2_CFLAGS@ GLIB2_LIBS = @GLIB2_LIBS@ GOBJECT2_CFLAGS = @GOBJECT2_CFLAGS@ @@ -120,26 +156,19 @@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ -LIBS = @PANGOCAIRO_LIBS@ @PANGO_LIBS@ @CAIRO_LIBS@ @GLIB2_LIBS@ @GOBJECT2_LIBS@ @X11_LIBS@ @XINERAMA_LIBS@ @IMLIB2_LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ +LIBS = @PANGOCAIRO_LIBS@ @PANGO_LIBS@ @CAIRO_LIBS@ @GLIB2_LIBS@ @GOBJECT2_LIBS@ @X11_LIBS@ @XINERAMA_LIBS@ @IMLIB2_LIBS@ -lrt LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PANGOCAIRO_CFLAGS = @PANGOCAIRO_CFLAGS@ PANGOCAIRO_LIBS = @PANGOCAIRO_LIBS@ @@ -147,45 +176,37 @@ PANGO_LIBS = @PANGO_LIBS@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ -RANLIB = @RANLIB@ -SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ +TINT2CONF_CFLAGS = @TINT2CONF_CFLAGS@ +TINT2CONF_LIBS = @TINT2CONF_LIBS@ VERSION = @VERSION@ X11_CFLAGS = @X11_CFLAGS@ X11_LIBS = @X11_LIBS@ XINERAMA_CFLAGS = @XINERAMA_CFLAGS@ XINERAMA_LIBS = @XINERAMA_LIBS@ XMKMF = @XMKMF@ +__PYTHON = @__PYTHON@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ -build = @build@ build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ -host = @host@ host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ @@ -194,7 +215,6 @@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ @@ -207,36 +227,35 @@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -AM_CFLAGS = -Wall @PANGOCAIRO_CFLAGS@ @PANGO_CFLAGS@ @CAIRO_CFLAGS@ \ - @GLIB2_CFLAGS@ @GOBJECT2_CFLAGS@ @X11_CFLAGS@ \ - @XINERAMA_CFLAGS@ @IMLIB2_CFLAGS@ $(am__append_1) -AM_LDFLAGS = -Wl,--as-needed -INCLUDES = -Iutil -Iclock -Itaskbar -Isystray $(am__append_2) -tint2_SOURCES = config.c util/area.h util/common.h util/area.c \ - util/window.h util/window.c panel.h clock/clock.c \ - clock/clock.h config.h tint.c panel.c server.c server.h \ - systray/systraybar.h systray/systraybar.c taskbar/taskbar.c \ - taskbar/task.c taskbar/taskbar.h taskbar/task.h \ - $(am__append_3) -DISTCLEANFILES = Makefile.in -all: all-am +@ENABLE_TINT2CONF_TRUE@SUBDIRS = tint2conf +INCLUDES = -Iutil -Iclock -Itaskbar -Isystray -Itooltip \ + $(am__append_2) +tint2_SOURCES = config.c util/area.h util/common.h util/common.c \ + util/area.c util/window.h util/window.c util/timer.h \ + util/timer.c panel.h clock/clock.c clock/clock.h config.h \ + tint.c panel.c server.c server.h systray/systraybar.h \ + systray/systraybar.c taskbar/taskbar.c taskbar/task.c \ + taskbar/taskbar.h taskbar/task.h tooltip/tooltip.c \ + tooltip/tooltip.h version.h $(am__append_3) +all: all-recursive .SUFFIXES: -.SUFFIXES: .c .lo .o .obj +.SUFFIXES: .c .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu src/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -254,34 +273,46 @@ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +version.h: $(top_builddir)/config.status $(srcdir)/version.h.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) tint2$(EXEEXT): $(tint2_OBJECTS) $(tint2_DEPENDENCIES) @rm -f tint2$(EXEEXT) $(LINK) $(tint2_OBJECTS) $(tint2_LDADD) $(LIBS) @@ -295,183 +326,303 @@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/area.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/battery.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clock.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/config.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/panel.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/systraybar.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/task.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/taskbar.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timer.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tint.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tooltip.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/window.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` -.c.lo: -@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +common.o: util/common.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common.o -MD -MP -MF $(DEPDIR)/common.Tpo -c -o common.o `test -f 'util/common.c' || echo '$(srcdir)/'`util/common.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/common.Tpo $(DEPDIR)/common.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util/common.c' object='common.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common.o `test -f 'util/common.c' || echo '$(srcdir)/'`util/common.c + +common.obj: util/common.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common.obj -MD -MP -MF $(DEPDIR)/common.Tpo -c -o common.obj `if test -f 'util/common.c'; then $(CYGPATH_W) 'util/common.c'; else $(CYGPATH_W) '$(srcdir)/util/common.c'; fi` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/common.Tpo $(DEPDIR)/common.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util/common.c' object='common.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common.obj `if test -f 'util/common.c'; then $(CYGPATH_W) 'util/common.c'; else $(CYGPATH_W) '$(srcdir)/util/common.c'; fi` area.o: util/area.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT area.o -MD -MP -MF $(DEPDIR)/area.Tpo -c -o area.o `test -f 'util/area.c' || echo '$(srcdir)/'`util/area.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/area.Tpo $(DEPDIR)/area.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/area.Tpo $(DEPDIR)/area.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util/area.c' object='area.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o area.o `test -f 'util/area.c' || echo '$(srcdir)/'`util/area.c area.obj: util/area.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT area.obj -MD -MP -MF $(DEPDIR)/area.Tpo -c -o area.obj `if test -f 'util/area.c'; then $(CYGPATH_W) 'util/area.c'; else $(CYGPATH_W) '$(srcdir)/util/area.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/area.Tpo $(DEPDIR)/area.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/area.Tpo $(DEPDIR)/area.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util/area.c' object='area.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o area.obj `if test -f 'util/area.c'; then $(CYGPATH_W) 'util/area.c'; else $(CYGPATH_W) '$(srcdir)/util/area.c'; fi` window.o: util/window.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT window.o -MD -MP -MF $(DEPDIR)/window.Tpo -c -o window.o `test -f 'util/window.c' || echo '$(srcdir)/'`util/window.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/window.Tpo $(DEPDIR)/window.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/window.Tpo $(DEPDIR)/window.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util/window.c' object='window.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o window.o `test -f 'util/window.c' || echo '$(srcdir)/'`util/window.c window.obj: util/window.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT window.obj -MD -MP -MF $(DEPDIR)/window.Tpo -c -o window.obj `if test -f 'util/window.c'; then $(CYGPATH_W) 'util/window.c'; else $(CYGPATH_W) '$(srcdir)/util/window.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/window.Tpo $(DEPDIR)/window.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/window.Tpo $(DEPDIR)/window.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util/window.c' object='window.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o window.obj `if test -f 'util/window.c'; then $(CYGPATH_W) 'util/window.c'; else $(CYGPATH_W) '$(srcdir)/util/window.c'; fi` +timer.o: util/timer.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT timer.o -MD -MP -MF $(DEPDIR)/timer.Tpo -c -o timer.o `test -f 'util/timer.c' || echo '$(srcdir)/'`util/timer.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/timer.Tpo $(DEPDIR)/timer.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util/timer.c' object='timer.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o timer.o `test -f 'util/timer.c' || echo '$(srcdir)/'`util/timer.c + +timer.obj: util/timer.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT timer.obj -MD -MP -MF $(DEPDIR)/timer.Tpo -c -o timer.obj `if test -f 'util/timer.c'; then $(CYGPATH_W) 'util/timer.c'; else $(CYGPATH_W) '$(srcdir)/util/timer.c'; fi` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/timer.Tpo $(DEPDIR)/timer.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='util/timer.c' object='timer.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o timer.obj `if test -f 'util/timer.c'; then $(CYGPATH_W) 'util/timer.c'; else $(CYGPATH_W) '$(srcdir)/util/timer.c'; fi` + clock.o: clock/clock.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT clock.o -MD -MP -MF $(DEPDIR)/clock.Tpo -c -o clock.o `test -f 'clock/clock.c' || echo '$(srcdir)/'`clock/clock.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/clock.Tpo $(DEPDIR)/clock.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/clock.Tpo $(DEPDIR)/clock.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='clock/clock.c' object='clock.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o clock.o `test -f 'clock/clock.c' || echo '$(srcdir)/'`clock/clock.c clock.obj: clock/clock.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT clock.obj -MD -MP -MF $(DEPDIR)/clock.Tpo -c -o clock.obj `if test -f 'clock/clock.c'; then $(CYGPATH_W) 'clock/clock.c'; else $(CYGPATH_W) '$(srcdir)/clock/clock.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/clock.Tpo $(DEPDIR)/clock.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/clock.Tpo $(DEPDIR)/clock.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='clock/clock.c' object='clock.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o clock.obj `if test -f 'clock/clock.c'; then $(CYGPATH_W) 'clock/clock.c'; else $(CYGPATH_W) '$(srcdir)/clock/clock.c'; fi` systraybar.o: systray/systraybar.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT systraybar.o -MD -MP -MF $(DEPDIR)/systraybar.Tpo -c -o systraybar.o `test -f 'systray/systraybar.c' || echo '$(srcdir)/'`systray/systraybar.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/systraybar.Tpo $(DEPDIR)/systraybar.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/systraybar.Tpo $(DEPDIR)/systraybar.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='systray/systraybar.c' object='systraybar.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o systraybar.o `test -f 'systray/systraybar.c' || echo '$(srcdir)/'`systray/systraybar.c systraybar.obj: systray/systraybar.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT systraybar.obj -MD -MP -MF $(DEPDIR)/systraybar.Tpo -c -o systraybar.obj `if test -f 'systray/systraybar.c'; then $(CYGPATH_W) 'systray/systraybar.c'; else $(CYGPATH_W) '$(srcdir)/systray/systraybar.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/systraybar.Tpo $(DEPDIR)/systraybar.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/systraybar.Tpo $(DEPDIR)/systraybar.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='systray/systraybar.c' object='systraybar.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o systraybar.obj `if test -f 'systray/systraybar.c'; then $(CYGPATH_W) 'systray/systraybar.c'; else $(CYGPATH_W) '$(srcdir)/systray/systraybar.c'; fi` taskbar.o: taskbar/taskbar.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT taskbar.o -MD -MP -MF $(DEPDIR)/taskbar.Tpo -c -o taskbar.o `test -f 'taskbar/taskbar.c' || echo '$(srcdir)/'`taskbar/taskbar.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/taskbar.Tpo $(DEPDIR)/taskbar.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/taskbar.Tpo $(DEPDIR)/taskbar.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='taskbar/taskbar.c' object='taskbar.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o taskbar.o `test -f 'taskbar/taskbar.c' || echo '$(srcdir)/'`taskbar/taskbar.c taskbar.obj: taskbar/taskbar.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT taskbar.obj -MD -MP -MF $(DEPDIR)/taskbar.Tpo -c -o taskbar.obj `if test -f 'taskbar/taskbar.c'; then $(CYGPATH_W) 'taskbar/taskbar.c'; else $(CYGPATH_W) '$(srcdir)/taskbar/taskbar.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/taskbar.Tpo $(DEPDIR)/taskbar.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/taskbar.Tpo $(DEPDIR)/taskbar.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='taskbar/taskbar.c' object='taskbar.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o taskbar.obj `if test -f 'taskbar/taskbar.c'; then $(CYGPATH_W) 'taskbar/taskbar.c'; else $(CYGPATH_W) '$(srcdir)/taskbar/taskbar.c'; fi` task.o: taskbar/task.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT task.o -MD -MP -MF $(DEPDIR)/task.Tpo -c -o task.o `test -f 'taskbar/task.c' || echo '$(srcdir)/'`taskbar/task.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/task.Tpo $(DEPDIR)/task.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/task.Tpo $(DEPDIR)/task.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='taskbar/task.c' object='task.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o task.o `test -f 'taskbar/task.c' || echo '$(srcdir)/'`taskbar/task.c task.obj: taskbar/task.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT task.obj -MD -MP -MF $(DEPDIR)/task.Tpo -c -o task.obj `if test -f 'taskbar/task.c'; then $(CYGPATH_W) 'taskbar/task.c'; else $(CYGPATH_W) '$(srcdir)/taskbar/task.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/task.Tpo $(DEPDIR)/task.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/task.Tpo $(DEPDIR)/task.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='taskbar/task.c' object='task.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o task.obj `if test -f 'taskbar/task.c'; then $(CYGPATH_W) 'taskbar/task.c'; else $(CYGPATH_W) '$(srcdir)/taskbar/task.c'; fi` +tooltip.o: tooltip/tooltip.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tooltip.o -MD -MP -MF $(DEPDIR)/tooltip.Tpo -c -o tooltip.o `test -f 'tooltip/tooltip.c' || echo '$(srcdir)/'`tooltip/tooltip.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/tooltip.Tpo $(DEPDIR)/tooltip.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tooltip/tooltip.c' object='tooltip.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tooltip.o `test -f 'tooltip/tooltip.c' || echo '$(srcdir)/'`tooltip/tooltip.c + +tooltip.obj: tooltip/tooltip.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tooltip.obj -MD -MP -MF $(DEPDIR)/tooltip.Tpo -c -o tooltip.obj `if test -f 'tooltip/tooltip.c'; then $(CYGPATH_W) 'tooltip/tooltip.c'; else $(CYGPATH_W) '$(srcdir)/tooltip/tooltip.c'; fi` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/tooltip.Tpo $(DEPDIR)/tooltip.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tooltip/tooltip.c' object='tooltip.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tooltip.obj `if test -f 'tooltip/tooltip.c'; then $(CYGPATH_W) 'tooltip/tooltip.c'; else $(CYGPATH_W) '$(srcdir)/tooltip/tooltip.c'; fi` + battery.o: battery/battery.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT battery.o -MD -MP -MF $(DEPDIR)/battery.Tpo -c -o battery.o `test -f 'battery/battery.c' || echo '$(srcdir)/'`battery/battery.c -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/battery.Tpo $(DEPDIR)/battery.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/battery.Tpo $(DEPDIR)/battery.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='battery/battery.c' object='battery.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o battery.o `test -f 'battery/battery.c' || echo '$(srcdir)/'`battery/battery.c battery.obj: battery/battery.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT battery.obj -MD -MP -MF $(DEPDIR)/battery.Tpo -c -o battery.obj `if test -f 'battery/battery.c'; then $(CYGPATH_W) 'battery/battery.c'; else $(CYGPATH_W) '$(srcdir)/battery/battery.c'; fi` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/battery.Tpo $(DEPDIR)/battery.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/battery.Tpo $(DEPDIR)/battery.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='battery/battery.c' object='battery.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o battery.obj `if test -f 'battery/battery.c'; then $(CYGPATH_W) 'battery/battery.c'; else $(CYGPATH_W) '$(srcdir)/battery/battery.c'; fi` -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -492,32 +643,65 @@ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done check-am: all-am -check: check-am +check: check-recursive all-am: Makefile $(PROGRAMS) -installdirs: +installdirs: installdirs-recursive +installdirs-am: for dir in "$(DESTDIR)$(bindir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -installcheck: installcheck-am +installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ @@ -529,85 +713,100 @@ distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -clean: clean-am +clean: clean-recursive -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am +clean-am: clean-binPROGRAMS clean-generic mostlyclean-am -distclean: distclean-am +distclean: distclean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags -dvi: dvi-am +dvi: dvi-recursive dvi-am: -html: html-am +html: html-recursive -info: info-am +html-am: + +info: info-recursive info-am: install-data-am: -install-dvi: install-dvi-am +install-dvi: install-dvi-recursive + +install-dvi-am: install-exec-am: install-binPROGRAMS -install-html: install-html-am +install-html: install-html-recursive -install-info: install-info-am +install-html-am: + +install-info: install-info-recursive + +install-info-am: install-man: -install-pdf: install-pdf-am +install-pdf: install-pdf-recursive + +install-pdf-am: -install-ps: install-ps-am +install-ps: install-ps-recursive + +install-ps-am: installcheck-am: -maintainer-clean: maintainer-clean-am +maintainer-clean: maintainer-clean-recursive -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic -mostlyclean: mostlyclean-am +mostlyclean: mostlyclean-recursive -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool +mostlyclean-am: mostlyclean-compile mostlyclean-generic -pdf: pdf-am +pdf: pdf-recursive pdf-am: -ps: ps-am +ps: ps-recursive ps-am: uninstall-am: uninstall-binPROGRAMS -.MAKE: install-am install-strip +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ + install-am install-strip tags-recursive -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic clean-libtool ctags distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am check check-am clean clean-binPROGRAMS \ + clean-generic ctags ctags-recursive distclean \ + distclean-compile distclean-generic distclean-tags distdir dvi \ dvi-am html html-am info info-am install install-am \ install-binPROGRAMS install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - pdf pdf-am ps ps-am tags uninstall uninstall-am \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ + ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-binPROGRAMS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff -Nru tint2-0.7.1/src/panel.c tint2-0.9/src/panel.c --- tint2-0.7.1/src/panel.c 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/panel.c 2010-01-22 19:49:24.000000000 +0000 @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -29,6 +30,7 @@ #include "window.h" #include "task.h" #include "panel.h" +#include "tooltip.h" int signal_pending; @@ -38,123 +40,242 @@ int mouse_right; int mouse_scroll_up; int mouse_scroll_down; +int mouse_tilt_left; +int mouse_tilt_right; int panel_mode; int wm_menu; +int panel_dock=0; // default not in the dock +int panel_layer=BOTTOM_LAYER; // default is bottom layer int panel_position; int panel_horizontal; int panel_refresh; +int panel_autohide = 0; +int panel_autohide_show_timeout = 0; +int panel_autohide_hide_timeout = 0; +int panel_autohide_height = 5; // for vertical panels this is of course the width +int panel_strut_policy = STRUT_MINIMUM; + Task *task_active; Task *task_drag; -Task *task_urgent; -int tick_urgent; int max_tick_urgent; +// panel's initial config +Panel panel_config; +// panels (one panel per monitor) Panel *panel1 = 0; -int nb_panel; +int nb_panel = 0; + +GArray* backgrounds = 0; + +Imlib_Image default_icon = NULL; +void autohide_hide(void* p); +void autohide_show(void* p); + void init_panel() { - int i; - Panel *p; + int i, old_nb_panel; + Panel *new_panel, *p; + if (panel_config.monitor > (server.nb_monitor-1)) { + // server.nb_monitor minimum value is 1 (see get_monitors()) + fprintf(stderr, "warning : monitor not found. tint2 default to all monitors.\n"); + panel_config.monitor = 0; + } + + init_tooltip(); + init_systray(); + init_clock(); +#ifdef ENABLE_BATTERY + init_battery(); +#endif + + cleanup_taskbar(); for (i=0 ; i < nb_panel ; i++) { - p = &panel1[i]; + free_area(&panel1[i].area); + if (panel1[i].temp_pmap) { + XFreePixmap(server.dsp, panel1[i].temp_pmap); + panel1[i].temp_pmap = 0; + } + } + + // number of panels + old_nb_panel = nb_panel; + if (panel_config.monitor >= 0) + nb_panel = 1; + else + nb_panel = server.nb_monitor; + + // freed old panels + for (i=nb_panel ; i < old_nb_panel ; i++) { + if (panel1[i].main_win) { + XDestroyWindow(server.dsp, panel1[i].main_win); + panel1[i].main_win = 0; + } + } + + // alloc & init new panel + Window old_win; + if (nb_panel != old_nb_panel) + new_panel = realloc(panel1, nb_panel * sizeof(Panel)); + else + new_panel = panel1; + for (i=0 ; i < nb_panel ; i++) { + old_win = new_panel[i].main_win; + memcpy(&new_panel[i], &panel_config, sizeof(Panel)); + new_panel[i].main_win = old_win; + } + + fprintf(stderr, "tint2 : nb monitor %d, nb monitor used %d, nb desktop %d\n", server.nb_monitor, nb_panel, server.nb_desktop); + for (i=0 ; i < nb_panel ; i++) { + p = &new_panel[i]; + if (panel_config.monitor < 0) + p->monitor = i; p->area.parent = p; p->area.panel = p; p->area.on_screen = 1; - p->area.resize = 1; + p->area.resize = 1; p->area._resize = resize_panel; - p->g_taskbar.parent = p; - p->g_taskbar.panel = p; + p->g_taskbar.area.parent = p; + p->g_taskbar.area.panel = p; p->g_task.area.panel = p; - + init_panel_size_and_position(p); // add childs - if (p->clock.area.on_screen) + if (clock_enabled) { + init_clock_panel(p); p->area.list = g_slist_append(p->area.list, &p->clock); + } #ifdef ENABLE_BATTERY - if (p->battery.area.on_screen) + if (battery_enabled) { + init_battery_panel(p); p->area.list = g_slist_append(p->area.list, &p->battery); + } #endif - // systray only on first panel - if (systray.area.on_screen && i == 0) + // systray only on first panel + if (systray.area.on_screen && i == 0) { + init_systray_panel(p); p->area.list = g_slist_append(p->area.list, &systray); - - // full width mode - if (!p->initial_width) { - p->initial_width = 100; - p->pourcentx = 1; + refresh_systray = 1; } - // detect panel size - if (panel_horizontal) { - if (p->pourcentx) - p->area.width = (float)server.monitor[p->monitor].width * p->initial_width / 100; - else - p->area.width = p->initial_width; - if (p->pourcenty) - p->area.height = (float)server.monitor[p->monitor].height * p->initial_height / 100; - else - p->area.height = p->initial_height; - if (p->area.pix.border.rounded > p->area.height/2) - p->area.pix.border.rounded = p->area.height/2; + if (i >= old_nb_panel) { + // new panel : catch some events + long event_mask = ExposureMask|ButtonPressMask|ButtonReleaseMask; + if (g_tooltip.enabled) + event_mask |= PointerMotionMask|LeaveWindowMask; + if (panel_autohide) + event_mask |= LeaveWindowMask|EnterWindowMask; + XSetWindowAttributes att = { .event_mask=event_mask, .colormap=server.colormap, .background_pixel=0, .border_pixel=0 }; + unsigned long mask = CWEventMask|CWColormap|CWBackPixel|CWBorderPixel; + p->main_win = XCreateWindow(server.dsp, server.root_win, p->posx, p->posy, p->area.width, p->area.height, 0, server.depth, InputOutput, server.visual, mask, &att); } else { - if (p->pourcentx) - p->area.height = (float)server.monitor[p->monitor].height * p->initial_width / 100; - else - p->area.height = p->initial_width; - if (p->pourcenty) - p->area.width = (float)server.monitor[p->monitor].width * p->initial_height / 100; - else - p->area.width = p->initial_height; - if (p->area.pix.border.rounded > p->area.width/2) - p->area.pix.border.rounded = p->area.width/2; + // old panel + XMoveResizeWindow(server.dsp, p->main_win, p->posx, p->posy, p->area.width, p->area.height); } - /* panel position determined here */ - if (panel_position & LEFT) { - p->posx = server.monitor[p->monitor].x + p->marginx; + if (!server.gc) { + XGCValues gcv; + server.gc = XCreateGC(server.dsp, p->main_win, 0, &gcv); + } + //printf("panel %d : %d, %d, %d, %d\n", i, p->posx, p->posy, p->area.width, p->area.height); + set_panel_properties(p); + set_panel_background(p); + if (i >= old_nb_panel) { + // map new panel + XMapWindow (server.dsp, p->main_win); + } + + if (panel_autohide) + add_timeout(panel_autohide_hide_timeout, 0, autohide_hide, p); + } + + panel1 = new_panel; + panel_refresh = 1; + init_taskbar(); + visible_object(); + task_refresh_tasklist(); + active_task(); +} + + +void init_panel_size_and_position(Panel *panel) +{ + // detect panel size + if (panel_horizontal) { + if (panel->pourcentx) + panel->area.width = (float)server.monitor[panel->monitor].width * panel->area.width / 100; + if (panel->pourcenty) + panel->area.height = (float)server.monitor[panel->monitor].height * panel->area.height / 100; + if (panel->area.bg->border.rounded > panel->area.height/2) { + printf("panel_background_id rounded is too big... please fix your tint2rc\n"); + g_array_append_val(backgrounds, *panel->area.bg); + panel->area.bg = &g_array_index(backgrounds, Background, backgrounds->len-1); + panel->area.bg->border.rounded = panel->area.height/2; + } + } + else { + int old_panel_height = panel->area.height; + if (panel->pourcentx) + panel->area.height = (float)server.monitor[panel->monitor].height * panel->area.width / 100; + else + panel->area.height = panel->area.width; + if (panel->pourcenty) + panel->area.width = (float)server.monitor[panel->monitor].width * old_panel_height / 100; + else + panel->area.width = old_panel_height; + if (panel->area.bg->border.rounded > panel->area.width/2) { + printf("panel_background_id rounded is too big... please fix your tint2rc\n"); + g_array_append_val(backgrounds, *panel->area.bg); + panel->area.bg = &g_array_index(backgrounds, Background, backgrounds->len-1); + panel->area.bg->border.rounded = panel->area.width/2; + } + } + + // panel position determined here + if (panel_position & LEFT) { + panel->posx = server.monitor[panel->monitor].x + panel->marginx; + } + else { + if (panel_position & RIGHT) { + panel->posx = server.monitor[panel->monitor].x + server.monitor[panel->monitor].width - panel->area.width - panel->marginx; } else { - if (panel_position & RIGHT) { - p->posx = server.monitor[p->monitor].x + server.monitor[p->monitor].width - p->area.width - p->marginx; - } - else { - if (panel_horizontal) - p->posx = server.monitor[p->monitor].x + ((server.monitor[p->monitor].width - p->area.width) / 2); - else - p->posx = server.monitor[p->monitor].x + p->marginx; - } + if (panel_horizontal) + panel->posx = server.monitor[panel->monitor].x + ((server.monitor[panel->monitor].width - panel->area.width) / 2); + else + panel->posx = server.monitor[panel->monitor].x + panel->marginx; } - if (panel_position & TOP) { - p->posy = server.monitor[p->monitor].y + p->marginy; + } + if (panel_position & TOP) { + panel->posy = server.monitor[panel->monitor].y + panel->marginy; + } + else { + if (panel_position & BOTTOM) { + panel->posy = server.monitor[panel->monitor].y + server.monitor[panel->monitor].height - panel->area.height - panel->marginy; } else { - if (panel_position & BOTTOM) { - p->posy = server.monitor[p->monitor].y + server.monitor[p->monitor].height - p->area.height - p->marginy; - } - else { - p->posy = server.monitor[p->monitor].y + ((server.monitor[p->monitor].height - p->area.height) / 2); - } + panel->posy = server.monitor[panel->monitor].y + ((server.monitor[panel->monitor].height - panel->area.height) / 2); } - // printf("panel : posx %d, posy %d, width %d, height %d\n", p->posx, p->posy, p->area.width, p->area.height); - - // Catch some events - XSetWindowAttributes att = { ParentRelative, 0L, 0, 0L, 0, 0, Always, 0L, 0L, False, ExposureMask|ButtonPressMask|ButtonReleaseMask, NoEventMask, False, 0, 0 }; - if (p->main_win) XDestroyWindow(server.dsp, p->main_win); - p->main_win = XCreateWindow(server.dsp, server.root_win, p->posx, p->posy, p->area.width, p->area.height, 0, server.depth, InputOutput, CopyFromParent, CWEventMask, &att); - - set_panel_properties(p); - set_panel_background(p); + } - XMapWindow (server.dsp, p->main_win); + if (panel_autohide) { + int diff = (panel_horizontal ? panel->area.height : panel->area.width) - panel_autohide_height; + if (panel_horizontal) { + panel->hidden_width = panel->area.width; + panel->hidden_height = panel->area.height - diff; + } + else { + panel->hidden_width = panel->area.width - diff; + panel->hidden_height = panel->area.height; + } } - panel_refresh = 1; + // printf("panel : posx %d, posy %d, width %d, height %d\n", panel->posx, panel->posy, panel->area.width, panel->area.height); } @@ -164,15 +285,8 @@ task_active = 0; task_drag = 0; - task_urgent = 0; - cleanup_systray(); - cleanup_taskbar(); - - // font allocated once - if (panel1[0].g_task.font_desc) { - pango_font_description_free(panel1[0].g_task.font_desc); - panel1[0].g_task.font_desc = 0; - } + + cleanup_taskbar(); int i; Panel *p; @@ -180,32 +294,46 @@ p = &panel1[i]; free_area(&p->area); - free_area(&p->g_task.area); - free_area(&p->g_taskbar); if (p->temp_pmap) { XFreePixmap(server.dsp, p->temp_pmap); p->temp_pmap = 0; } + if (p->hidden_pixmap) + XFreePixmap(server.dsp, p->hidden_pixmap); + p->hidden_pixmap = 0; if (p->main_win) { XDestroyWindow(server.dsp, p->main_win); p->main_win = 0; } } - if (panel1) free(panel1); - panel1 = 0; + if (panel1) { + free(panel1); + panel1 = 0; + nb_panel = 0; + } + + if (panel_config.g_task.font_desc) { + pango_font_description_free(panel_config.g_task.font_desc); + panel_config.g_task.font_desc = 0; + } + + if (backgrounds) { + g_array_free(backgrounds, 1); + backgrounds = 0; + } } void resize_panel(void *obj) { - Panel *panel = (Panel*)obj; + Panel *panel = (Panel*)obj; if (panel_horizontal) { - int taskbar_width, modulo_width = 0; + int taskbar_width, modulo_width = 0; - taskbar_width = panel->area.width - (2 * panel->area.paddingxlr) - (2 * panel->area.pix.border.width); + taskbar_width = panel->area.width - (2 * panel->area.paddingxlr) - (2 * panel->area.bg->border.width); if (panel->clock.area.on_screen && panel->clock.area.width) taskbar_width -= (panel->clock.area.width + panel->area.paddingx); #ifdef ENABLE_BATTERY @@ -224,7 +352,7 @@ // change posx and width for all taskbar int i, posx; - posx = panel->area.pix.border.width + panel->area.paddingxlr; + posx = panel->area.bg->border.width + panel->area.paddingxlr; for (i=0 ; i < panel->nb_desktop ; i++) { panel->taskbar[i].area.posx = posx; panel->taskbar[i].area.width = taskbar_width; @@ -239,10 +367,10 @@ } } else { - int taskbar_height, modulo_height = 0; + int taskbar_height, modulo_height = 0; int i, posy; - taskbar_height = panel->area.height - (2 * panel->area.paddingxlr) - (2 * panel->area.pix.border.width); + taskbar_height = panel->area.height - (2 * panel->area.paddingxlr) - (2 * panel->area.bg->border.width); if (panel->clock.area.on_screen && panel->clock.area.height) taskbar_height -= (panel->clock.area.height + panel->area.paddingx); #ifdef ENABLE_BATTERY @@ -253,7 +381,7 @@ if (systray.area.on_screen && systray.area.height && panel == &panel1[0]) taskbar_height -= (systray.area.height + panel->area.paddingx); - posy = panel->area.height - panel->area.pix.border.width - panel->area.paddingxlr - taskbar_height; + posy = panel->area.height - panel->area.bg->border.width - panel->area.paddingxlr - taskbar_height; if (panel_mode == MULTI_DESKTOP) { int height = taskbar_height - ((panel->nb_desktop-1) * panel->area.paddingx); taskbar_height = height / panel->nb_desktop; @@ -278,8 +406,8 @@ void visible_object() { - Panel *panel; - int i, j; + Panel *panel; + int i, j; for (i=0 ; i < nb_panel ; i++) { panel = &panel1[i]; @@ -299,116 +427,184 @@ panel_refresh = 1; } - -void set_panel_properties(Panel *p) +void update_strut(Panel* p) { - XStoreName (server.dsp, p->main_win, "tint2"); - - // TODO: check if the name is really needed for a panel/taskbar ? - gsize len; - gchar *name = g_locale_to_utf8("tint2", -1, NULL, &len, NULL); - if (name != NULL) { - XChangeProperty(server.dsp, p->main_win, server.atom._NET_WM_NAME, server.atom.UTF8_STRING, 8, PropModeReplace, (unsigned char *) name, (int) len); - g_free(name); - } - - // Dock - long val = server.atom._NET_WM_WINDOW_TYPE_DOCK; - XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_WINDOW_TYPE, XA_ATOM, 32, PropModeReplace, (unsigned char *) &val, 1); - - // Reserved space - long struts [12] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; + // Reserved space + unsigned int d1, screen_width, screen_height; + Window d2; + int d3; + XGetGeometry(server.dsp, server.root_win, &d2, &d3, &d3, &screen_width, &screen_height, &d1, &d1); + Monitor monitor = server.monitor[p->monitor]; + long struts [12] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; if (panel_horizontal) { + int height = p->area.height + p->marginy; + if (panel_autohide && (panel_strut_policy == STRUT_MINIMUM || (panel_strut_policy == STRUT_FOLLOW_SIZE && p->is_hidden)) ) + height = p->hidden_height; if (panel_position & TOP) { - struts[2] = p->area.height + p->marginy; + struts[2] = height + monitor.y; struts[8] = p->posx; // p->area.width - 1 allowed full screen on monitor 2 struts[9] = p->posx + p->area.width - 1; } else { - struts[3] = p->area.height + p->marginy; + struts[3] = height + screen_height - monitor.y - monitor.height; struts[10] = p->posx; // p->area.width - 1 allowed full screen on monitor 2 struts[11] = p->posx + p->area.width - 1; } } else { + int width = p->area.width + p->marginx; + if (panel_autohide && (panel_strut_policy == STRUT_MINIMUM || (panel_strut_policy == STRUT_FOLLOW_SIZE && p->is_hidden)) ) + width = p->hidden_width; if (panel_position & LEFT) { - struts[0] = p->area.width + p->marginx; + struts[0] = width + monitor.x; struts[4] = p->posy; // p->area.width - 1 allowed full screen on monitor 2 struts[5] = p->posy + p->area.height - 1; } else { - struts[1] = p->area.width + p->marginx; + struts[1] = width + screen_width - monitor.x - monitor.width; struts[6] = p->posy; // p->area.width - 1 allowed full screen on monitor 2 struts[7] = p->posy + p->area.height - 1; } } - // Old specification : fluxbox need _NET_WM_STRUT. - XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_STRUT, XA_CARDINAL, 32, PropModeReplace, (unsigned char *) &struts, 4); - XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_STRUT_PARTIAL, XA_CARDINAL, 32, PropModeReplace, (unsigned char *) &struts, 12); - - // Sticky and below other window - val = 0xFFFFFFFF; - XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_DESKTOP, XA_CARDINAL, 32, PropModeReplace, (unsigned char *) &val, 1); - Atom state[4]; - state[0] = server.atom._NET_WM_STATE_SKIP_PAGER; - state[1] = server.atom._NET_WM_STATE_SKIP_TASKBAR; - state[2] = server.atom._NET_WM_STATE_STICKY; - state[3] = server.atom._NET_WM_STATE_BELOW; - XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_STATE, XA_ATOM, 32, PropModeReplace, (unsigned char *) state, 4); - - // Fixed position - XSizeHints size_hints; - size_hints.flags = PPosition; - XChangeProperty (server.dsp, p->main_win, XA_WM_NORMAL_HINTS, XA_WM_SIZE_HINTS, 32, PropModeReplace, (unsigned char *) &size_hints, sizeof (XSizeHints) / 4); - - // Unfocusable - XWMHints wmhints; - wmhints.flags = InputHint; - wmhints.input = False; - XChangeProperty (server.dsp, p->main_win, XA_WM_HINTS, XA_WM_HINTS, 32, PropModeReplace, (unsigned char *) &wmhints, sizeof (XWMHints) / 4); - - // Undecorated - long prop[5] = { 2, 0, 0, 0, 0 }; - XChangeProperty(server.dsp, p->main_win, server.atom._MOTIF_WM_HINTS, server.atom._MOTIF_WM_HINTS, 32, PropModeReplace, (unsigned char *) prop, 5); + // Old specification : fluxbox need _NET_WM_STRUT. + XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_STRUT, XA_CARDINAL, 32, PropModeReplace, (unsigned char *) &struts, 4); + XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_STRUT_PARTIAL, XA_CARDINAL, 32, PropModeReplace, (unsigned char *) &struts, 12); } -void set_panel_background(Panel *p) +void set_panel_properties(Panel *p) { - get_root_pixmap(); + XStoreName (server.dsp, p->main_win, "tint2"); - if (p->area.pix.pmap) XFreePixmap (server.dsp, p->area.pix.pmap); - p->area.pix.pmap = XCreatePixmap (server.dsp, server.root_win, p->area.width, p->area.height, server.depth); + gsize len; + gchar *name = g_locale_to_utf8("tint2", -1, NULL, &len, NULL); + if (name != NULL) { + XChangeProperty(server.dsp, p->main_win, server.atom._NET_WM_NAME, server.atom.UTF8_STRING, 8, PropModeReplace, (unsigned char *) name, (int) len); + g_free(name); + } - // copy background (server.root_pmap) in panel.area.pix.pmap - Window dummy; - int x, y; - XTranslateCoordinates(server.dsp, p->main_win, server.root_win, 0, 0, &x, &y, &dummy); - XSetTSOrigin(server.dsp, server.gc, -x, -y) ; - XFillRectangle(server.dsp, p->area.pix.pmap, server.gc, 0, 0, p->area.width, p->area.height); - - // draw background panel - cairo_surface_t *cs; - cairo_t *c; - cs = cairo_xlib_surface_create (server.dsp, p->area.pix.pmap, server.visual, p->area.width, p->area.height); - c = cairo_create (cs); + // Dock + long val = server.atom._NET_WM_WINDOW_TYPE_DOCK; + XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_WINDOW_TYPE, XA_ATOM, 32, PropModeReplace, (unsigned char *) &val, 1); + + // Sticky and below other window + val = ALLDESKTOP; + XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_DESKTOP, XA_CARDINAL, 32, PropModeReplace, (unsigned char *) &val, 1); + Atom state[4]; + state[0] = server.atom._NET_WM_STATE_SKIP_PAGER; + state[1] = server.atom._NET_WM_STATE_SKIP_TASKBAR; + state[2] = server.atom._NET_WM_STATE_STICKY; + state[3] = panel_layer == BOTTOM_LAYER ? server.atom._NET_WM_STATE_BELOW : server.atom._NET_WM_STATE_ABOVE; + int nb_atoms = panel_layer == NORMAL_LAYER ? 3 : 4; + XChangeProperty (server.dsp, p->main_win, server.atom._NET_WM_STATE, XA_ATOM, 32, PropModeReplace, (unsigned char *) state, nb_atoms); + + // Unfocusable + XWMHints wmhints; + if (panel_dock) { + wmhints.icon_window = wmhints.window_group = p->main_win; + wmhints.flags = StateHint | IconWindowHint; + wmhints.initial_state = WithdrawnState; + } + else { + wmhints.flags = InputHint; + wmhints.input = False; + } + XSetWMHints(server.dsp, p->main_win, &wmhints); - draw_background(&p->area, c, 0); + // Undecorated + long prop[5] = { 2, 0, 0, 0, 0 }; + XChangeProperty(server.dsp, p->main_win, server.atom._MOTIF_WM_HINTS, server.atom._MOTIF_WM_HINTS, 32, PropModeReplace, (unsigned char *) prop, 5); + + // XdndAware - Register for Xdnd events + int version=5; + XChangeProperty(server.dsp, p->main_win, server.atom.XdndAware, XA_ATOM, 32, PropModeReplace, (unsigned char*)&version, 1); + + update_strut(p); + + // Fixed position and non-resizable window + // Allow panel move and resize when tint2 reload config file + int minwidth = panel_autohide ? p->hidden_width : p->area.width; + int minheight = panel_autohide ? p->hidden_height : p->area.height; + XSizeHints size_hints; + size_hints.flags = PPosition|PMinSize|PMaxSize; + size_hints.min_width = minwidth; + size_hints.max_width = p->area.width; + size_hints.min_height = minheight; + size_hints.max_height = p->area.height; + XSetWMNormalHints(server.dsp, p->main_win, &size_hints); + + // Set WM_CLASS + XClassHint* classhint = XAllocClassHint(); + classhint->res_name = "tint2"; + classhint->res_class = "Tint2"; + XSetClassHint(server.dsp, p->main_win, classhint); + XFree(classhint); +} - cairo_destroy (c); - cairo_surface_destroy (cs); + +void set_panel_background(Panel *p) +{ + if (p->area.pix) XFreePixmap (server.dsp, p->area.pix); + p->area.pix = XCreatePixmap (server.dsp, server.root_win, p->area.width, p->area.height, server.depth); + + int xoff=0, yoff=0; + if (panel_horizontal && panel_position & BOTTOM) + yoff = p->area.height-p->hidden_height; + else if (!panel_horizontal && panel_position & RIGHT) + xoff = p->area.width-p->hidden_width; + + if (real_transparency) { + clear_pixmap(p->area.pix, 0, 0, p->area.width, p->area.height); + } + else { + get_root_pixmap(); + // copy background (server.root_pmap) in panel.area.pix + Window dummy; + int x, y; + XTranslateCoordinates(server.dsp, p->main_win, server.root_win, 0, 0, &x, &y, &dummy); + if (panel_autohide && p->is_hidden) { + x -= xoff; + y -= yoff; + } + XSetTSOrigin(server.dsp, server.gc, -x, -y); + XFillRectangle(server.dsp, p->area.pix, server.gc, 0, 0, p->area.width, p->area.height); + } + + // draw background panel + cairo_surface_t *cs; + cairo_t *c; + cs = cairo_xlib_surface_create (server.dsp, p->area.pix, server.visual, p->area.width, p->area.height); + c = cairo_create (cs); + draw_background(&p->area, c); + cairo_destroy (c); + cairo_surface_destroy (cs); + + if (panel_autohide) { + if (p->hidden_pixmap) XFreePixmap(server.dsp, p->hidden_pixmap); + p->hidden_pixmap = XCreatePixmap(server.dsp, server.root_win, p->hidden_width, p->hidden_height, server.depth); + XCopyArea(server.dsp, p->area.pix, p->hidden_pixmap, server.gc, xoff, yoff, p->hidden_width, p->hidden_height, 0, 0); + } // redraw panel's object - GSList *l0; - Area *a; + GSList *l0; + Area *a; for (l0 = p->area.list; l0 ; l0 = l0->next) { - a = l0->data; - set_redraw(a); - } + a = l0->data; + set_redraw(a); + } + // reset task 'state_pix' + int i; + Taskbar *tskbar; + for (i=0 ; i < p->nb_desktop ; i++) { + tskbar = &p->taskbar[i]; + for (l0 = tskbar->area.list; l0 ; l0 = l0->next) { + set_task_redraw((Task *)l0->data); + } + } } @@ -423,3 +619,199 @@ return 0; } + +Taskbar *click_taskbar (Panel *panel, int x, int y) +{ + Taskbar *tskbar; + int i; + + if (panel_horizontal) { + for (i=0; i < panel->nb_desktop ; i++) { + tskbar = &panel->taskbar[i]; + if (tskbar->area.on_screen && x >= tskbar->area.posx && x <= (tskbar->area.posx + tskbar->area.width)) + return tskbar; + } + } + else { + for (i=0; i < panel->nb_desktop ; i++) { + tskbar = &panel->taskbar[i]; + if (tskbar->area.on_screen && y >= tskbar->area.posy && y <= (tskbar->area.posy + tskbar->area.height)) + return tskbar; + } + } + return NULL; +} + + +Task *click_task (Panel *panel, int x, int y) +{ + GSList *l0; + Taskbar *tskbar; + + if ( (tskbar = click_taskbar(panel, x, y)) ) { + if (panel_horizontal) { + Task *tsk; + for (l0 = tskbar->area.list; l0 ; l0 = l0->next) { + tsk = l0->data; + if (tsk->area.on_screen && x >= tsk->area.posx && x <= (tsk->area.posx + tsk->area.width)) { + return tsk; + } + } + } + else { + Task *tsk; + for (l0 = tskbar->area.list; l0 ; l0 = l0->next) { + tsk = l0->data; + if (tsk->area.on_screen && y >= tsk->area.posy && y <= (tsk->area.posy + tsk->area.height)) { + return tsk; + } + } + } + } + return NULL; +} + + +int click_padding(Panel *panel, int x, int y) +{ + if (panel_horizontal) { + if (x < panel->area.paddingxlr || x > panel->area.width-panel->area.paddingxlr) + return 1; + } + else { + if (y < panel->area.paddingxlr || y > panel->area.height-panel->area.paddingxlr) + return 1; + } + return 0; +} + + +int click_clock(Panel *panel, int x, int y) +{ + Clock clk = panel->clock; + if (panel_horizontal) { + if (clk.area.on_screen && x >= clk.area.posx && x <= (clk.area.posx + clk.area.width)) + return TRUE; + } else { + if (clk.area.on_screen && y >= clk.area.posy && y <= (clk.area.posy + clk.area.height)) + return TRUE; + } + return FALSE; +} + + +Area* click_area(Panel *panel, int x, int y) +{ + Area* result = &panel->area; + Area* new_result = result; + do { + result = new_result; + GSList* it = result->list; + while (it) { + Area* a = it->data; + if (panel_horizontal) { + if (a->on_screen && x >= a->posx && x <= (a->posx + a->width)) { + new_result = a; + break; + } + } else { + if (a->on_screen && y >= a->posy && y <= (a->posy + a->height)) { + new_result = a; + break; + } + } + it = it->next; + } + } while (new_result != result); + return result; +} + + +void stop_autohide_timeout(Panel* p) +{ + if (p->autohide_timeout) { + stop_timeout(p->autohide_timeout); + p->autohide_timeout = 0; + } +} + + +void autohide_show(void* p) +{ + Panel* panel = p; + stop_autohide_timeout(panel); + panel->is_hidden = 0; + if (panel_strut_policy == STRUT_FOLLOW_SIZE) + update_strut(p); + + XMapSubwindows(server.dsp, panel->main_win); // systray windows + if (panel_horizontal) { + if (panel_position & TOP) + XResizeWindow(server.dsp, panel->main_win, panel->area.width, panel->area.height); + else + XMoveResizeWindow(server.dsp, panel->main_win, panel->posx, panel->posy, panel->area.width, panel->area.height); + } + else { + if (panel_position & LEFT) + XResizeWindow(server.dsp, panel->main_win, panel->area.width, panel->area.height); + else + XMoveResizeWindow(server.dsp, panel->main_win, panel->posx, panel->posy, panel->area.width, panel->area.height); + } + refresh_systray = 1; // ugly hack, because we actually only need to call XSetBackgroundPixmap + panel_refresh = 1; +} + + +void autohide_hide(void* p) +{ + Panel* panel = p; + stop_autohide_timeout(panel); + panel->is_hidden = 1; + if (panel_strut_policy == STRUT_FOLLOW_SIZE) + update_strut(p); + + XUnmapSubwindows(server.dsp, panel->main_win); // systray windows + int diff = (panel_horizontal ? panel->area.height : panel->area.width) - panel_autohide_height; + if (panel_horizontal) { + if (panel_position & TOP) + XResizeWindow(server.dsp, panel->main_win, panel->hidden_width, panel->hidden_height); + else + XMoveResizeWindow(server.dsp, panel->main_win, panel->posx, panel->posy+diff, panel->hidden_width, panel->hidden_height); + } + else { + if (panel_position & LEFT) + XResizeWindow(server.dsp, panel->main_win, panel->hidden_width, panel->hidden_height); + else + XMoveResizeWindow(server.dsp, panel->main_win, panel->posx+diff, panel->posy, panel->hidden_width, panel->hidden_height); + } + panel_refresh = 1; +} + + +void autohide_trigger_show(Panel* p) +{ + if (!p) + return; + if (p->autohide_timeout) + change_timeout(p->autohide_timeout, panel_autohide_show_timeout, 0, autohide_show, p); + else + p->autohide_timeout = add_timeout(panel_autohide_show_timeout, 0, autohide_show, p); +} + + +void autohide_trigger_hide(Panel* p) +{ + if (!p) + return; + + Window root, child; + int xr, yr, xw, yw; + unsigned int mask; + if (XQueryPointer(server.dsp, p->main_win, &root, &child, &xr, &yr, &xw, &yw, &mask)) + if (child) return; // mouse over one of the system tray icons + + if (p->autohide_timeout) + change_timeout(p->autohide_timeout, panel_autohide_hide_timeout, 0, autohide_hide, p); + else + p->autohide_timeout = add_timeout(panel_autohide_hide_timeout, 0, autohide_hide, p); +} diff -Nru tint2-0.7.1/src/panel.h tint2-0.9/src/panel.h --- tint2-0.7.1/src/panel.h 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/panel.h 2010-01-09 00:11:01.000000000 +0000 @@ -32,11 +32,16 @@ extern int mouse_right; extern int mouse_scroll_up; extern int mouse_scroll_down; +extern int mouse_tilt_left; +extern int mouse_tilt_right; //panel mode enum { SINGLE_DESKTOP=0, MULTI_DESKTOP }; +enum { BOTTOM_LAYER, NORMAL_LAYER, TOP_LAYER }; extern int panel_mode; extern int wm_menu; +extern int panel_dock; +extern int panel_layer; //panel position enum { LEFT=0x01, RIGHT=0x02, CENTER=0X04, TOP=0X08, BOTTOM=0x10 }; @@ -45,59 +50,81 @@ extern int panel_refresh; +//panel autohide +enum { STRUT_MINIMUM, STRUT_FOLLOW_SIZE }; +extern int panel_autohide; +extern int panel_autohide_show_timeout; +extern int panel_autohide_hide_timeout; +extern int panel_autohide_height; // for vertical panels this is of course the width +extern int panel_strut_policy; + extern Task *task_active; extern Task *task_drag; -extern Task *task_urgent; -extern int tick_urgent; extern int max_tick_urgent; +extern GArray* backgrounds; + +extern Imlib_Image default_icon; + +// tint2 use one panel per monitor and one taskbar per desktop. typedef struct { - // always start with area - // area.list own all objects of the panel according to config file - Area area; - - // -------------------------------------------------- - // panel - Window main_win; - Pixmap temp_pmap; + // always start with area + // area.list own all objects of the panel according to config file + Area area; + + // -------------------------------------------------- + // panel + Window main_win; + Pixmap temp_pmap; - // position relative to root window + // position relative to root window int posx, posy; - int marginx, marginy; - float initial_width, initial_height; - int pourcentx, pourcenty; - // location of the panel (monitor number) - int monitor; - - // -------------------------------------------------- - // task and taskbar parameter per panel - Area g_taskbar; + int marginx, marginy; + int pourcentx, pourcenty; + // location of the panel (monitor number) + int monitor; + + // -------------------------------------------------- + // task and taskbar parameter per panel + Global_taskbar g_taskbar; Global_task g_task; - // -------------------------------------------------- - // taskbar point to the first taskbar in panel.area.list. - // number of tasbar == nb_desktop - Taskbar *taskbar; - int nb_desktop; - - // -------------------------------------------------- - // clock - Clock clock; + // -------------------------------------------------- + // taskbar point to the first taskbar in panel.area.list. + // number of tasbar == nb_desktop. taskbar[i] is for desktop(i). + // taskbar[i] is used to loop over taskbar, + // while panel->area.list is used to loop over all panel's objects + Taskbar *taskbar; + int nb_desktop; + + // -------------------------------------------------- + // clock + Clock clock; // -------------------------------------------------- // battery #ifdef ENABLE_BATTERY Battery battery; #endif + + // autohide + int is_hidden; + int hidden_width, hidden_height; + Pixmap hidden_pixmap; + timeout* autohide_timeout; } Panel; +extern Panel panel_config; extern Panel *panel1; extern int nb_panel; - +// realloc panels according to number of monitor +// use panel_config as default value void init_panel(); + +void init_panel_size_and_position(Panel *panel); void cleanup_panel(); void resize_panel(void *obj); @@ -110,5 +137,13 @@ // detect witch panel Panel *get_panel(Window win); -#endif +Taskbar *click_taskbar (Panel *panel, int x, int y); +Task *click_task (Panel *panel, int x, int y); +int click_padding(Panel *panel, int x, int y); +int click_clock(Panel *panel, int x, int y); +Area* click_area(Panel *panel, int x, int y); +void autohide_trigger_show(); +void autohide_trigger_hide(); + +#endif diff -Nru tint2-0.7.1/src/server.c tint2-0.9/src/server.c --- tint2-0.7.1/src/server.c 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/server.c 2010-01-26 23:00:27.000000000 +0000 @@ -18,6 +18,8 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. **************************************************************************/ +#include + #include #include #include @@ -28,52 +30,56 @@ void server_catch_error (Display *d, XErrorEvent *ev){} -static char *name_trayer = 0; - +int real_transparency = 0; void server_init_atoms () { - server.atom._XROOTPMAP_ID = XInternAtom (server.dsp, "_XROOTPMAP_ID", False); - server.atom._NET_CURRENT_DESKTOP = XInternAtom (server.dsp, "_NET_CURRENT_DESKTOP", False); - server.atom._NET_NUMBER_OF_DESKTOPS = XInternAtom (server.dsp, "_NET_NUMBER_OF_DESKTOPS", False); - server.atom._NET_DESKTOP_GEOMETRY = XInternAtom (server.dsp, "_NET_DESKTOP_GEOMETRY", False); - server.atom._NET_DESKTOP_VIEWPORT = XInternAtom (server.dsp, "_NET_DESKTOP_VIEWPORT", False); - server.atom._NET_ACTIVE_WINDOW = XInternAtom (server.dsp, "_NET_ACTIVE_WINDOW", False); - server.atom._NET_WM_WINDOW_TYPE = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE", False); - server.atom._NET_WM_STATE_SKIP_PAGER = XInternAtom (server.dsp, "_NET_WM_STATE_SKIP_PAGER", False); - server.atom._NET_WM_STATE_SKIP_TASKBAR = XInternAtom (server.dsp, "_NET_WM_STATE_SKIP_TASKBAR", False); - server.atom._NET_WM_STATE_STICKY = XInternAtom (server.dsp, "_NET_WM_STATE_STICKY", False); - server.atom._NET_WM_STATE_DEMANDS_ATTENTION = XInternAtom (server.dsp, "_NET_WM_STATE_DEMANDS_ATTENTION", False); - server.atom._NET_WM_WINDOW_TYPE_DOCK = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_DOCK", False); - server.atom._NET_WM_WINDOW_TYPE_DESKTOP = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_DESKTOP", False); - server.atom._NET_WM_WINDOW_TYPE_TOOLBAR = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_TOOLBAR", False); - server.atom._NET_WM_WINDOW_TYPE_MENU = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_MENU", False); - server.atom._NET_WM_WINDOW_TYPE_SPLASH = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_SPLASH", False); - server.atom._NET_WM_WINDOW_TYPE_DIALOG = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_DIALOG", False); - server.atom._NET_WM_WINDOW_TYPE_NORMAL = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_NORMAL", False); - server.atom._NET_WM_DESKTOP = XInternAtom (server.dsp, "_NET_WM_DESKTOP", False); - server.atom.WM_STATE = XInternAtom (server.dsp, "WM_STATE", False); - server.atom._NET_WM_STATE = XInternAtom (server.dsp, "_NET_WM_STATE", False); - server.atom._NET_WM_STATE_SHADED = XInternAtom (server.dsp, "_NET_WM_STATE_SHADED", False); - server.atom._NET_WM_STATE_BELOW = XInternAtom (server.dsp, "_NET_WM_STATE_BELOW", False); - server.atom._NET_WM_STATE_MODAL = XInternAtom (server.dsp, "_NET_WM_STATE_MODAL", False); - server.atom._NET_CLIENT_LIST = XInternAtom (server.dsp, "_NET_CLIENT_LIST", False); - server.atom._NET_WM_VISIBLE_NAME = XInternAtom (server.dsp, "_NET_WM_VISIBLE_NAME", False); - server.atom._NET_WM_NAME = XInternAtom (server.dsp, "_NET_WM_NAME", False); - server.atom._NET_WM_STRUT = XInternAtom (server.dsp, "_NET_WM_STRUT", False); - server.atom._NET_WM_ICON = XInternAtom (server.dsp, "_NET_WM_ICON", False); - server.atom._NET_CLOSE_WINDOW = XInternAtom (server.dsp, "_NET_CLOSE_WINDOW", False); - server.atom.UTF8_STRING = XInternAtom (server.dsp, "UTF8_STRING", False); - server.atom._NET_SUPPORTING_WM_CHECK = XInternAtom (server.dsp, "_NET_SUPPORTING_WM_CHECK", False); - server.atom._NET_SUPPORTING_WM_CHECK = XInternAtom (server.dsp, "_NET_WM_NAME", False); - server.atom._WIN_LAYER = XInternAtom (server.dsp, "_WIN_LAYER", False); - server.atom._NET_WM_STRUT_PARTIAL = XInternAtom (server.dsp, "_NET_WM_STRUT_PARTIAL", False); - server.atom.WM_NAME = XInternAtom(server.dsp, "WM_NAME", False); - server.atom.__SWM_VROOT = XInternAtom(server.dsp, "__SWM_VROOT", False); - server.atom._MOTIF_WM_HINTS = XInternAtom(server.dsp, "_MOTIF_WM_HINTS", False); + server.atom._XROOTPMAP_ID = XInternAtom (server.dsp, "_XROOTPMAP_ID", False); + server.atom._NET_CURRENT_DESKTOP = XInternAtom (server.dsp, "_NET_CURRENT_DESKTOP", False); + server.atom._NET_NUMBER_OF_DESKTOPS = XInternAtom (server.dsp, "_NET_NUMBER_OF_DESKTOPS", False); + server.atom._NET_DESKTOP_GEOMETRY = XInternAtom (server.dsp, "_NET_DESKTOP_GEOMETRY", False); + server.atom._NET_DESKTOP_VIEWPORT = XInternAtom (server.dsp, "_NET_DESKTOP_VIEWPORT", False); + server.atom._NET_ACTIVE_WINDOW = XInternAtom (server.dsp, "_NET_ACTIVE_WINDOW", False); + server.atom._NET_WM_WINDOW_TYPE = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE", False); + server.atom._NET_WM_STATE_SKIP_PAGER = XInternAtom (server.dsp, "_NET_WM_STATE_SKIP_PAGER", False); + server.atom._NET_WM_STATE_SKIP_TASKBAR = XInternAtom (server.dsp, "_NET_WM_STATE_SKIP_TASKBAR", False); + server.atom._NET_WM_STATE_STICKY = XInternAtom (server.dsp, "_NET_WM_STATE_STICKY", False); + server.atom._NET_WM_STATE_DEMANDS_ATTENTION = XInternAtom (server.dsp, "_NET_WM_STATE_DEMANDS_ATTENTION", False); + server.atom._NET_WM_WINDOW_TYPE_DOCK = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_DOCK", False); + server.atom._NET_WM_WINDOW_TYPE_DESKTOP = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_DESKTOP", False); + server.atom._NET_WM_WINDOW_TYPE_TOOLBAR = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_TOOLBAR", False); + server.atom._NET_WM_WINDOW_TYPE_MENU = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_MENU", False); + server.atom._NET_WM_WINDOW_TYPE_SPLASH = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_SPLASH", False); + server.atom._NET_WM_WINDOW_TYPE_DIALOG = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_DIALOG", False); + server.atom._NET_WM_WINDOW_TYPE_NORMAL = XInternAtom (server.dsp, "_NET_WM_WINDOW_TYPE_NORMAL", False); + server.atom._NET_WM_DESKTOP = XInternAtom (server.dsp, "_NET_WM_DESKTOP", False); + server.atom.WM_STATE = XInternAtom (server.dsp, "WM_STATE", False); + server.atom._NET_WM_STATE = XInternAtom (server.dsp, "_NET_WM_STATE", False); + server.atom._NET_WM_STATE_MAXIMIZED_VERT = XInternAtom (server.dsp, "_NET_WM_STATE_MAXIMIZED_VERT", False); + server.atom._NET_WM_STATE_MAXIMIZED_HORZ = XInternAtom (server.dsp, "_NET_WM_STATE_MAXIMIZED_HORZ", False); + server.atom._NET_WM_STATE_SHADED = XInternAtom (server.dsp, "_NET_WM_STATE_SHADED", False); + server.atom._NET_WM_STATE_HIDDEN = XInternAtom (server.dsp, "_NET_WM_STATE_HIDDEN", False); + server.atom._NET_WM_STATE_BELOW = XInternAtom (server.dsp, "_NET_WM_STATE_BELOW", False); + server.atom._NET_WM_STATE_ABOVE = XInternAtom (server.dsp, "_NET_WM_STATE_ABOVE", False); + server.atom._NET_WM_STATE_MODAL = XInternAtom (server.dsp, "_NET_WM_STATE_MODAL", False); + server.atom._NET_CLIENT_LIST = XInternAtom (server.dsp, "_NET_CLIENT_LIST", False); + server.atom._NET_WM_VISIBLE_NAME = XInternAtom (server.dsp, "_NET_WM_VISIBLE_NAME", False); + server.atom._NET_WM_NAME = XInternAtom (server.dsp, "_NET_WM_NAME", False); + server.atom._NET_WM_STRUT = XInternAtom (server.dsp, "_NET_WM_STRUT", False); + server.atom._NET_WM_ICON = XInternAtom (server.dsp, "_NET_WM_ICON", False); + server.atom._NET_CLOSE_WINDOW = XInternAtom (server.dsp, "_NET_CLOSE_WINDOW", False); + server.atom.UTF8_STRING = XInternAtom (server.dsp, "UTF8_STRING", False); + server.atom._NET_SUPPORTING_WM_CHECK = XInternAtom (server.dsp, "_NET_SUPPORTING_WM_CHECK", False); + server.atom._NET_WM_CM_S0 = XInternAtom (server.dsp, "_NET_WM_CM_S0", False); + server.atom._NET_SUPPORTING_WM_CHECK = XInternAtom (server.dsp, "_NET_WM_NAME", False); + server.atom._NET_WM_STRUT_PARTIAL = XInternAtom (server.dsp, "_NET_WM_STRUT_PARTIAL", False); + server.atom.WM_NAME = XInternAtom(server.dsp, "WM_NAME", False); + server.atom.__SWM_VROOT = XInternAtom(server.dsp, "__SWM_VROOT", False); + server.atom._MOTIF_WM_HINTS = XInternAtom(server.dsp, "_MOTIF_WM_HINTS", False); + server.atom.WM_HINTS = XInternAtom(server.dsp, "WM_HINTS", False); // systray protocol - name_trayer = g_strdup_printf("_NET_SYSTEM_TRAY_S%d", DefaultScreen(server.dsp)); + char *name_trayer = g_strdup_printf("_NET_SYSTEM_TRAY_S%d", DefaultScreen(server.dsp)); server.atom._NET_SYSTEM_TRAY_SCREEN = XInternAtom(server.dsp, name_trayer, False); server.atom._NET_SYSTEM_TRAY_OPCODE = XInternAtom(server.dsp, "_NET_SYSTEM_TRAY_OPCODE", False); server.atom.MANAGER = XInternAtom(server.dsp, "MANAGER", False); @@ -81,76 +87,88 @@ server.atom._NET_SYSTEM_TRAY_ORIENTATION = XInternAtom(server.dsp, "_NET_SYSTEM_TRAY_ORIENTATION", False); server.atom._XEMBED = XInternAtom(server.dsp, "_XEMBED", False); server.atom._XEMBED_INFO = XInternAtom(server.dsp, "_XEMBED_INFO", False); + g_free(name_trayer); + + // drag 'n' drop + server.atom.XdndAware = XInternAtom(server.dsp, "XdndAware", False); + server.atom.XdndPosition = XInternAtom(server.dsp, "XdndPosition", False); + server.atom.XdndStatus = XInternAtom(server.dsp, "XdndStatus", False); + + server.colormap = 0; + server.monitor = 0; + server.gc = 0; } void cleanup_server() { - if (name_trayer) free(name_trayer); + if (server.colormap) XFreeColormap(server.dsp, server.colormap); + if (server.monitor) free(server.monitor); + if (server.gc) XFreeGC(server.dsp, server.gc); } void send_event32 (Window win, Atom at, long data1, long data2, long data3) { - XEvent event; + XEvent event; - event.xclient.type = ClientMessage; - event.xclient.serial = 0; - event.xclient.send_event = True; - event.xclient.display = server.dsp; - event.xclient.window = win; - event.xclient.message_type = at; - - event.xclient.format = 32; - event.xclient.data.l[0] = data1; - event.xclient.data.l[1] = data2; - event.xclient.data.l[2] = data3; - event.xclient.data.l[3] = 0; - event.xclient.data.l[4] = 0; + event.xclient.type = ClientMessage; + event.xclient.serial = 0; + event.xclient.send_event = True; + event.xclient.display = server.dsp; + event.xclient.window = win; + event.xclient.message_type = at; + + event.xclient.format = 32; + event.xclient.data.l[0] = data1; + event.xclient.data.l[1] = data2; + event.xclient.data.l[2] = data3; + event.xclient.data.l[3] = 0; + event.xclient.data.l[4] = 0; - XSendEvent(server.dsp, server.root_win, False, SubstructureRedirectMask|SubstructureNotifyMask, &event); + XSendEvent(server.dsp, server.root_win, False, SubstructureRedirectMask|SubstructureNotifyMask, &event); } int get_property32 (Window win, Atom at, Atom type) { - Atom type_ret; - int format_ret = 0, data = 0; - unsigned long nitems_ret = 0; - unsigned long bafter_ret = 0; - unsigned char *prop_value = 0; - int result; - - if (!win) return 0; - - result = XGetWindowProperty(server.dsp, win, at, 0, 0x7fffffff, False, type, &type_ret, &format_ret, &nitems_ret, &bafter_ret, &prop_value); - - if (result == Success && prop_value) { - data = ((gulong*)prop_value)[0]; - XFree (prop_value); - } - return data; + Atom type_ret; + int format_ret = 0, data = 0; + unsigned long nitems_ret = 0; + unsigned long bafter_ret = 0; + unsigned char *prop_value = 0; + int result; + + if (!win) return 0; + + result = XGetWindowProperty(server.dsp, win, at, 0, 0x7fffffff, False, type, &type_ret, &format_ret, &nitems_ret, &bafter_ret, &prop_value); + + if (result == Success && prop_value) { + data = ((gulong*)prop_value)[0]; + XFree (prop_value); + } + return data; } void *server_get_property (Window win, Atom at, Atom type, int *num_results) { - Atom type_ret; - int format_ret = 0; - unsigned long nitems_ret = 0; - unsigned long bafter_ret = 0; - unsigned char *prop_value; - int result; - - if (!win) return 0; + Atom type_ret; + int format_ret = 0; + unsigned long nitems_ret = 0; + unsigned long bafter_ret = 0; + unsigned char *prop_value; + int result; + + if (!win) return 0; - result = XGetWindowProperty(server.dsp, win, at, 0, 0x7fffffff, False, type, &type_ret, &format_ret, &nitems_ret, &bafter_ret, &prop_value); + result = XGetWindowProperty(server.dsp, win, at, 0, 0x7fffffff, False, type, &type_ret, &format_ret, &nitems_ret, &bafter_ret, &prop_value); - /* Send back resultcount */ - if (num_results) *num_results = nitems_ret; + /* Send back resultcount */ + if (num_results) *num_results = nitems_ret; - if (result == Success && prop_value) return prop_value; - else return 0; + if (result == Success && prop_value) return prop_value; + else return 0; } @@ -158,7 +176,7 @@ { Pixmap ret = None; - unsigned long *res; + unsigned long *res; int c = 2; do { @@ -166,7 +184,7 @@ if (res) { ret = *((Pixmap*)res); XFree(res); - break; + break; } } while (--c > 0); server.root_pmap = ret; @@ -186,100 +204,155 @@ } -int compareMonitor(const void *monitor1, const void *monitor2) +int compareMonitorPos(const void *monitor1, const void *monitor2) +{ + Monitor *m1 = (Monitor*)monitor1; + Monitor *m2 = (Monitor*)monitor2; + + if (m1->x < m2->x) { + return -1; + } + else if (m1->x > m2->x) { + return 1; + } + else if (m1->y < m2->y) { + return -1; + } + else if (m1->y > m2->y) { + return 1; + } + else { + return 0; + } +} + + +int compareMonitorIncluded(const void *monitor1, const void *monitor2) { - Monitor *m1 = (Monitor*)monitor1; - Monitor *m2 = (Monitor*)monitor2; + Monitor *m1 = (Monitor*)monitor1; + Monitor *m2 = (Monitor*)monitor2; - if (m1->x < m2->x) { - return -1; - } - else - if (m1->x > m2->x) { - return 1; - } - else - if (m1->width < m2->width) { - return 1; - } - else - if (m1->width > m2->width) { - return -1; - } - else { - return 0; - } + if (m1->x >= m2->x && m1->y >= m2->y && (m1->x+m1->width) <= (m2->x+m2->width) && (m1->y+m1->height) <= (m2->y+m2->height)) { + // m1 included inside m2 + return 1; + } + else { + return -1; + } } -void get_monitors_and_desktops() -{ - int i; - - if (server.monitor) free(server.monitor); - server.nb_monitor = 0; - server.monitor = 0; - - int nb_monitor; - if (XineramaIsActive(server.dsp)) { - XineramaScreenInfo *info = XineramaQueryScreens(server.dsp, &nb_monitor); - - if (info) { - int nb=0, j; - - i = 0; - server.monitor = calloc(nb_monitor, sizeof(Monitor)); - while (i < nb_monitor) { - for (j = 0; j < i; j++) { - if (info[i].x_org >= info[j].x_org && info[i].y_org >= info[j].y_org && (info[i].x_org+info[i].width) <= (info[j].x_org+info[j].width) && (info[i].y_org+info[i].height) <= (info[j].y_org+info[j].height)) { - if (info[i].x_org == info[j].x_org && info[i].y_org == info[j].y_org && info[i].width == info[j].width && info[i].height == info[j].height && nb == 0) { - // add the first monitor - break; - } - else { - // doesn't count monitor 'i' because it's included into another one - //fprintf(stderr, "monitor %d included into another one\n", i); - goto next; - } +void get_monitors() +{ + if (server.monitor) free(server.monitor); + server.nb_monitor = 0; + server.monitor = 0; + + int i, j, nbmonitor; + if (XineramaIsActive(server.dsp)) { + XineramaScreenInfo *info = XineramaQueryScreens(server.dsp, &nbmonitor); + + if (info && nbmonitor > 0) { + server.monitor = malloc(nbmonitor * sizeof(Monitor)); + for (i=0 ; i < nbmonitor ; i++) { + server.monitor[i].x = info[i].x_org; + server.monitor[i].y = info[i].y_org; + server.monitor[i].width = info[i].width; + server.monitor[i].height = info[i].height; + } + XFree(info); + + // ordered monitor + qsort(server.monitor, nbmonitor, sizeof(Monitor), compareMonitorIncluded); + + // remove monitor included into another one + i = 0; + while (i < nbmonitor) { + for (j=0; j < i ; j++) { + if (compareMonitorIncluded(&server.monitor[i], &server.monitor[j]) > 0) { + goto next; } } - - server.monitor[nb].x = info[i].x_org; - server.monitor[nb].y = info[i].y_org; - server.monitor[nb].width = info[i].width; - server.monitor[nb].height = info[i].height; - nb++; -next: i++; - } - XFree(info); - server.nb_monitor = nb; - - // ordered monitor according to coordinate - qsort(server.monitor, server.nb_monitor, sizeof(Monitor), compareMonitor); - } - } - - if (!server.nb_monitor) { - server.nb_monitor = 1; - server.monitor = calloc(server.nb_monitor, sizeof(Monitor)); - server.monitor[0].x = server.monitor[0].y = 0; - server.monitor[0].width = DisplayWidth (server.dsp, server.screen); - server.monitor[0].height = DisplayHeight (server.dsp, server.screen); - } + } +next: + server.nb_monitor = i; + server.monitor = realloc(server.monitor, server.nb_monitor * sizeof(Monitor)); + qsort(server.monitor, server.nb_monitor, sizeof(Monitor), compareMonitorPos); + } + } + + if (!server.nb_monitor) { + server.nb_monitor = 1; + server.monitor = malloc(sizeof(Monitor)); + server.monitor[0].x = server.monitor[0].y = 0; + server.monitor[0].width = DisplayWidth (server.dsp, server.screen); + server.monitor[0].height = DisplayHeight (server.dsp, server.screen); + } +} + + +void get_desktops() +{ + int i; // detect number of desktops // wait 15s to leave some time for window manager startup - for (i=0 ; i < 15 ; i++) { - server.nb_desktop = server_get_number_of_desktop (); - if (server.nb_desktop > 0) break; - sleep(1); - } - if (server.nb_desktop == 0) { - server.nb_desktop = 1; - fprintf(stderr, "warning : WM doesn't respect NETWM specs. tint2 default to 1 desktop.\n"); - } - fprintf(stderr, "tint2 : nb monitor %d, nb desktop %d\n", server.nb_monitor, server.nb_desktop); + for (i=0 ; i < 15 ; i++) { + server.nb_desktop = server_get_number_of_desktop (); + if (server.nb_desktop > 0) break; + sleep(1); + } + if (server.nb_desktop == 0) { + server.nb_desktop = 1; + fprintf(stderr, "warning : WM doesn't respect NETWM specs. tint2 default to 1 desktop.\n"); + } } +void server_init_visual() +{ + // inspired by freedesktops fdclock ;) + XVisualInfo *xvi; + XVisualInfo templ = { .screen=server.screen, .depth=32, .class=TrueColor }; + int nvi; + xvi = XGetVisualInfo(server.dsp, VisualScreenMask|VisualDepthMask|VisualClassMask, &templ, &nvi); + + Visual *visual = 0; + if (xvi) { + int i; + XRenderPictFormat *format; + for (i = 0; i < nvi; i++) { + format = XRenderFindVisualFormat(server.dsp, xvi[i].visual); + if (format->type == PictTypeDirect && format->direct.alphaMask) { + visual = xvi[i].visual; + break; + } + } + } + XFree (xvi); + + // check composite manager + server.composite_manager = XGetSelectionOwner(server.dsp, server.atom._NET_WM_CM_S0); + if (server.colormap) + XFreeColormap(server.dsp, server.colormap); + + if (visual && server.composite_manager != None) { + XSetWindowAttributes attrs; + attrs.event_mask = StructureNotifyMask; + XChangeWindowAttributes (server.dsp, server.composite_manager, CWEventMask, &attrs); + + real_transparency = 1; + server.depth = 32; + printf("real transparency on... depth: %d\n", server.depth); + server.colormap = XCreateColormap(server.dsp, server.root_win, visual, AllocNone); + server.visual = visual; + } + else { + real_transparency = 0; + server.depth = DefaultDepth(server.dsp, server.screen); + printf("real transparency off.... depth: %d\n", server.depth); + server.colormap = DefaultColormap(server.dsp, server.screen); + server.visual = DefaultVisual(server.dsp, server.screen); + } +} diff -Nru tint2-0.7.1/src/server.h tint2-0.9/src/server.h --- tint2-0.7.1/src/server.h 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/server.h 2010-01-26 23:00:27.000000000 +0000 @@ -13,7 +13,7 @@ #include #include - +extern int real_transparency; typedef struct Global_atom { Atom _XROOTPMAP_ID; @@ -37,8 +37,12 @@ Atom _NET_WM_DESKTOP; Atom WM_STATE; Atom _NET_WM_STATE; + Atom _NET_WM_STATE_MAXIMIZED_VERT; + Atom _NET_WM_STATE_MAXIMIZED_HORZ; Atom _NET_WM_STATE_SHADED; + Atom _NET_WM_STATE_HIDDEN; Atom _NET_WM_STATE_BELOW; + Atom _NET_WM_STATE_ABOVE; Atom _NET_WM_STATE_MODAL; Atom _NET_CLIENT_LIST; Atom _NET_WM_NAME; @@ -48,11 +52,12 @@ Atom _NET_CLOSE_WINDOW; Atom UTF8_STRING; Atom _NET_SUPPORTING_WM_CHECK; - Atom _WIN_LAYER; + Atom _NET_WM_CM_S0; Atom _NET_WM_STRUT_PARTIAL; Atom WM_NAME; Atom __SWM_VROOT; Atom _MOTIF_WM_HINTS; + Atom WM_HINTS; Atom _NET_SYSTEM_TRAY_SCREEN; Atom _NET_SYSTEM_TRAY_OPCODE; Atom MANAGER; @@ -60,6 +65,9 @@ Atom _NET_SYSTEM_TRAY_ORIENTATION; Atom _XEMBED; Atom _XEMBED_INFO; + Atom XdndAware; + Atom XdndPosition; + Atom XdndStatus; } Global_atom; @@ -77,6 +85,7 @@ { Display *dsp; Window root_win; + Window composite_manager; // current desktop int desktop; int screen; @@ -90,6 +99,7 @@ // root background Pixmap root_pmap; GC gc; + Colormap colormap; Global_atom atom; } Server_global; @@ -101,16 +111,17 @@ int get_property32 (Window win, Atom at, Atom type); void *server_get_property (Window win, Atom at, Atom type, int *num_results); Atom server_get_atom (char *atom_name); -void server_refresh_root_pixmap (); -void server_refresh_main_pixmap (); void server_catch_error (Display *d, XErrorEvent *ev); void server_init_atoms (); +void server_init_visual(); +void cleanup_server(); // detect root background void get_root_pixmap(); // detect monitors and desktops -void get_monitors_and_desktops(); +void get_monitors(); +void get_desktops(); #endif diff -Nru tint2-0.7.1/src/systray/systraybar.c tint2-0.9/src/systray/systraybar.c --- tint2-0.7.1/src/systray/systraybar.c 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/systray/systraybar.c 2010-01-26 18:32:00.000000000 +0000 @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include "systraybar.h" #include "server.h" @@ -38,63 +40,68 @@ #define SYSTEM_TRAY_CANCEL_MESSAGE 2 // selection window -Window net_sel_win = None, hint_win = None; +Window net_sel_win = None; // freedesktop specification doesn't allow multi systray Systraybar systray; int refresh_systray; +int systray_enabled; +int systray_max_icon_size = 0; + +// background pixmap if we render ourselves the icons +static Pixmap render_background = 0; void init_systray() { - Panel *panel = &panel1[0]; - - if (systray.area.on_screen) - systray.area.on_screen = init_net(); + start_net(); - if (!systray.area.on_screen) + if (!systray_enabled) return; - systray.area.parent = panel; - systray.area.panel = panel; systray.area._draw_foreground = draw_systray; systray.area._resize = resize_systray; systray.area.resize = 1; systray.area.redraw = 1; + systray.area.on_screen = 1; refresh_systray = 0; +} + + +void init_systray_panel(void *p) +{ + Panel *panel =(Panel*)p; - // configure systray - // draw only one systray (even with multi panel) if (panel_horizontal) { - systray.area.posy = panel->area.pix.border.width + panel->area.paddingy; + systray.area.posy = panel->area.bg->border.width + panel->area.paddingy; systray.area.height = panel->area.height - (2 * systray.area.posy); } else { - systray.area.posx = panel->area.pix.border.width + panel->area.paddingy; - systray.area.width = panel->area.width - (2 * panel->area.pix.border.width) - (2 * panel->area.paddingy); + systray.area.posx = panel->area.bg->border.width + panel->area.paddingy; + systray.area.width = panel->area.width - (2 * panel->area.bg->border.width) - (2 * panel->area.paddingy); } + systray.area.parent = p; + systray.area.panel = p; } void cleanup_systray() { - if (systray.list_icons) { - // remove_icon change systray.list_icons - while(systray.list_icons) - remove_icon((TrayWindow*)systray.list_icons->data); - - g_slist_free(systray.list_icons); - systray.list_icons = 0; - } - + systray_enabled = 0; + systray.area.on_screen = 0; free_area(&systray.area); - cleanup_net(); + if (render_background) XFreePixmap(server.dsp, render_background); } -void draw_systray(void *obj, cairo_t *c, int active) +void draw_systray(void *obj, cairo_t *c) { - // tint2 don't draw systray icons. just the background. + if (real_transparency || systray.alpha != 100 || systray.brightness != 0 || systray.saturation != 0) { + if (render_background) XFreePixmap(server.dsp, render_background); + render_background = XCreatePixmap(server.dsp, server.root_win, systray.area.width, systray.area.height, server.depth); + XCopyArea(server.dsp, systray.area.pix, render_background, server.gc, 0, 0, systray.area.width, systray.area.height, 0, 0); + } + refresh_systray = 1; } @@ -105,21 +112,35 @@ Panel *panel = sysbar->area.panel; TrayWindow *traywin; GSList *l; - int count, posx, posy; - int icon_size; + int count, icon_size; + int icons_per_column=1, icons_per_row=1, marging=0; if (panel_horizontal) icon_size = sysbar->area.height; else icon_size = sysbar->area.width; - icon_size = icon_size - (2 * sysbar->area.pix.border.width) - (2 * sysbar->area.paddingy); - count = g_slist_length(systray.list_icons); + icon_size = icon_size - (2 * sysbar->area.bg->border.width) - (2 * sysbar->area.paddingy); + if (systray_max_icon_size > 0 && icon_size > systray_max_icon_size) + icon_size = systray_max_icon_size; + count = 0; + for (l = systray.list_icons; l ; l = l->next) { + if (!((TrayWindow*)l->data)->hide) + count++; + } + //printf("count %d\n", count); if (panel_horizontal) { if (!count) systray.area.width = 0; - else systray.area.width = (2 * systray.area.pix.border.width) + (2 * systray.area.paddingxlr) + (icon_size * count) + ((count-1) * systray.area.paddingx); + else { + int height = sysbar->area.height - 2*sysbar->area.bg->border.width - 2*sysbar->area.paddingy; + // here icons_per_column always higher than 0 + icons_per_column = (height+sysbar->area.paddingx) / (icon_size+sysbar->area.paddingx); + marging = height - (icons_per_column-1)*(icon_size+sysbar->area.paddingx) - icon_size; + icons_per_row = count / icons_per_column + (count%icons_per_column != 0); + systray.area.width = (2 * systray.area.bg->border.width) + (2 * systray.area.paddingxlr) + (icon_size * icons_per_row) + ((icons_per_row-1) * systray.area.paddingx); + } - systray.area.posx = panel->area.width - panel->area.pix.border.width - panel->area.paddingxlr - systray.area.width; + systray.area.posx = panel->area.width - panel->area.bg->border.width - panel->area.paddingxlr - systray.area.width; if (panel->clock.area.on_screen) systray.area.posx -= (panel->clock.area.width + panel->area.paddingx); #ifdef ENABLE_BATTERY @@ -129,9 +150,16 @@ } else { if (!count) systray.area.height = 0; - else systray.area.height = (2 * systray.area.pix.border.width) + (2 * systray.area.paddingxlr) + (icon_size * count) + ((count-1) * systray.area.paddingx); + else { + int width = sysbar->area.width - 2*sysbar->area.bg->border.width - 2*sysbar->area.paddingy; + // here icons_per_row always higher than 0 + icons_per_row = (width+sysbar->area.paddingx) / (icon_size+sysbar->area.paddingx); + marging = width - (icons_per_row-1)*(icon_size+sysbar->area.paddingx) - icon_size; + icons_per_column = count / icons_per_row+ (count%icons_per_row != 0); + systray.area.height = (2 * systray.area.bg->border.width) + (2 * systray.area.paddingxlr) + (icon_size * icons_per_column) + ((icons_per_column-1) * systray.area.paddingx); + } - systray.area.posy = panel->area.pix.border.width + panel->area.paddingxlr; + systray.area.posy = panel->area.bg->border.width + panel->area.paddingxlr; if (panel->clock.area.on_screen) systray.area.posy += (panel->clock.area.height + panel->area.paddingx); #ifdef ENABLE_BATTERY @@ -140,60 +168,112 @@ #endif } + int i, posx, posy; + int start = panel->area.bg->border.width + panel->area.paddingy + systray.area.bg->border.width + systray.area.paddingy +marging/2; if (panel_horizontal) { - posy = panel->area.pix.border.width + panel->area.paddingy + systray.area.pix.border.width + systray.area.paddingy; - posx = systray.area.posx + systray.area.pix.border.width + systray.area.paddingxlr; + posy = start; + posx = systray.area.posx + systray.area.bg->border.width + systray.area.paddingxlr; } else { - posx = panel->area.pix.border.width + panel->area.paddingy + systray.area.pix.border.width + systray.area.paddingy; - posy = systray.area.posy + systray.area.pix.border.width + systray.area.paddingxlr; + posx = start; + posy = systray.area.posy + systray.area.bg->border.width + systray.area.paddingxlr; } - for (l = systray.list_icons; l ; l = l->next) { + + for (i=1, l = systray.list_icons; l ; i++, l = l->next) { traywin = (TrayWindow*)l->data; + if (traywin->hide) continue; traywin->y = posy; traywin->x = posx; traywin->width = icon_size; traywin->height = icon_size; - if (panel_horizontal) - posx += (icon_size + systray.area.paddingx); - else - posy += (icon_size + systray.area.paddingx); + if (panel_horizontal) { + if (i % icons_per_column) + posy += icon_size + sysbar->area.paddingx; + else { + posy = start; + posx += (icon_size + systray.area.paddingx); + } + } + else { + if (i % icons_per_row) + posx += icon_size + systray.area.paddingx; + else { + posx = start; + posy += (icon_size + systray.area.paddingx); + } + } // position and size the icon window XMoveResizeWindow(server.dsp, traywin->id, traywin->x, traywin->y, icon_size, icon_size); + XResizeWindow(server.dsp, traywin->tray_id, icon_size, icon_size); } + // resize force the redraw + systray.area.redraw = 1; } // *********************************************** // systray protocol -int init_net() +void start_net() { + if (net_sel_win) { + // protocol already started + if (!systray_enabled) + stop_net(); + return; + } + else + if (!systray_enabled) + return; + + Window win = XGetSelectionOwner(server.dsp, server.atom._NET_SYSTEM_TRAY_SCREEN); + // freedesktop systray specification - if (XGetSelectionOwner(server.dsp, server.atom._NET_SYSTEM_TRAY_SCREEN) != None) { - fprintf(stderr, "tint2 : another systray is running\n"); - return 0; + if (win != None) { + // search pid + Atom _NET_WM_PID, actual_type; + int actual_format; + unsigned long nitems; + unsigned long bytes_after; + unsigned char *prop = 0; + int pid; + + _NET_WM_PID = XInternAtom(server.dsp, "_NET_WM_PID", True); + int ret = XGetWindowProperty(server.dsp, win, _NET_WM_PID, 0, 1024, False, AnyPropertyType, &actual_type, &actual_format, &nitems, &bytes_after, &prop); + + fprintf(stderr, "tint2 : another systray is running"); + if (ret == Success && prop) { + pid = prop[1] * 256; + pid += prop[0]; + fprintf(stderr, " pid=%d", pid); + } + fprintf(stderr, "\n"); + return; } // init systray protocol - net_sel_win = XCreateSimpleWindow(server.dsp, server.root_win, -1, -1, 1, 1, 0, 0, 0); + net_sel_win = XCreateSimpleWindow(server.dsp, server.root_win, -1, -1, 1, 1, 0, 0, 0); - // v0.2 trayer specification. tint2 always orizontal. - // TODO : vertical panel ?? + // v0.3 trayer specification. tint2 always horizontal. + // Vertical panel will draw the systray horizontal. int orient = 0; XChangeProperty(server.dsp, net_sel_win, server.atom._NET_SYSTEM_TRAY_ORIENTATION, XA_CARDINAL, 32, PropModeReplace, (unsigned char *) &orient, 1); + VisualID vid = XVisualIDFromVisual(server.visual); + XChangeProperty(server.dsp, net_sel_win, XInternAtom(server.dsp, "_NET_SYSTEM_TRAY_VISUAL", False), XA_VISUALID, 32, PropModeReplace, (unsigned char*)&vid, 1); XSetSelectionOwner(server.dsp, server.atom._NET_SYSTEM_TRAY_SCREEN, net_sel_win, CurrentTime); if (XGetSelectionOwner(server.dsp, server.atom._NET_SYSTEM_TRAY_SCREEN) != net_sel_win) { + stop_net(); fprintf(stderr, "tint2 : can't get systray manager\n"); - return 0; - } + return; + } - XClientMessageEvent ev; + //fprintf(stderr, "tint2 : systray started\n"); + XClientMessageEvent ev; ev.type = ClientMessage; - ev.window = server.root_win; + ev.window = server.root_win; ev.message_type = server.atom.MANAGER; ev.format = 32; ev.data.l[0] = CurrentTime; @@ -202,15 +282,24 @@ ev.data.l[3] = 0; ev.data.l[4] = 0; XSendEvent(server.dsp, server.root_win, False, StructureNotifyMask, (XEvent*)&ev); - return 1; } -void cleanup_net() +void stop_net() { + //fprintf(stderr, "tint2 : systray stopped\n"); + if (systray.list_icons) { + // remove_icon change systray.list_icons + while(systray.list_icons) + remove_icon((TrayWindow*)systray.list_icons->data); + + g_slist_free(systray.list_icons); + systray.list_icons = 0; + } + if (net_sel_win != None) { - XDestroyWindow(server.dsp, net_sel_win); - net_sel_win = None; + XDestroyWindow(server.dsp, net_sel_win); + net_sel_win = None; } } @@ -227,19 +316,59 @@ } +static gint compare_traywindows(gconstpointer a, gconstpointer b) +{ + const TrayWindow * traywin_a = (TrayWindow*)a; + const TrayWindow * traywin_b = (TrayWindow*)b; + XTextProperty name_a, name_b; + + if(XGetWMName(server.dsp, traywin_a->tray_id, &name_a) == 0) { + return -1; + } + else if(XGetWMName(server.dsp, traywin_b->tray_id, &name_b) == 0) { + XFree(name_a.value); + return 1; + } + else { + gint retval = g_ascii_strncasecmp((char*)name_a.value, (char*)name_b.value, -1) * systray.sort; + XFree(name_a.value); + XFree(name_b.value); + return retval; + } +} + + gboolean add_icon(Window id) { TrayWindow *traywin; XErrorHandler old; Panel *panel = systray.area.panel; + int hide = 0; error = FALSE; + XWindowAttributes attr; + XGetWindowAttributes(server.dsp, id, &attr); + unsigned long mask = 0; + XSetWindowAttributes set_attr; + if (attr.depth != server.depth || systray.alpha != 100 || systray.brightness != 0 || systray.saturation != 0 ) { + set_attr.colormap = attr.colormap; + set_attr.background_pixel = 0; + set_attr.border_pixel = 0; + mask = CWColormap|CWBackPixel|CWBorderPixel; + } + else { + set_attr.background_pixmap = ParentRelative; + mask = CWBackPixmap; + } + Window parent_window; + parent_window = XCreateWindow(server.dsp, panel->main_win, 0, 0, 30, 30, 0, attr.depth, InputOutput, attr.visual, mask, &set_attr); old = XSetErrorHandler(window_error_handler); - XReparentWindow(server.dsp, id, panel->main_win, 0, 0); + XReparentWindow(server.dsp, id, parent_window, 0, 0); XSync(server.dsp, False); XSetErrorHandler(old); if (error != FALSE) { fprintf(stderr, "tint2 : not icon_swallow\n"); + XDestroyWindow(server.dsp, parent_window); return FALSE; } @@ -251,9 +380,18 @@ int ret; ret = XGetWindowProperty(server.dsp, id, server.atom._XEMBED_INFO, 0, 2, False, server.atom._XEMBED_INFO, &acttype, &actfmt, &nbitem, &bytes, &data); - if (data) XFree(data); - if (ret != Success) { + if (ret == Success) { + if (data) { + if (nbitem == 2) { + //hide = ((data[1] & XEMBED_MAPPED) == 0); + //printf("hide %d\n", hide); + } + XFree(data); + } + } + else { fprintf(stderr, "tint2 : xembed error\n"); + XDestroyWindow(server.dsp, parent_window); return FALSE; } } @@ -268,24 +406,39 @@ e.xclient.data.l[0] = CurrentTime; e.xclient.data.l[1] = XEMBED_EMBEDDED_NOTIFY; e.xclient.data.l[2] = 0; - e.xclient.data.l[3] = panel->main_win; + e.xclient.data.l[3] = parent_window; e.xclient.data.l[4] = 0; XSendEvent(server.dsp, id, False, 0xFFFFFF, &e); } traywin = g_new0(TrayWindow, 1); - traywin->id = id; - - systray.list_icons = g_slist_prepend(systray.list_icons, traywin); - systray.area.resize = 1; - systray.area.redraw = 1; + traywin->id = parent_window; + traywin->tray_id = id; + traywin->hide = hide; + traywin->depth = attr.depth; + traywin->damage = 0; + + if (systray.sort == 3) + systray.list_icons = g_slist_prepend(systray.list_icons, traywin); + else if (systray.sort == 2) + systray.list_icons = g_slist_append(systray.list_icons, traywin); + else + systray.list_icons = g_slist_insert_sorted(systray.list_icons, traywin, compare_traywindows); + systray.area.resize = 1; //printf("add_icon id %lx, %d\n", id, g_slist_length(systray.list_icons)); // watch for the icon trying to resize itself! - XSelectInput(server.dsp, traywin->id, StructureNotifyMask); + XSelectInput(server.dsp, traywin->tray_id, StructureNotifyMask); + if (real_transparency || systray.alpha != 100 || systray.brightness != 0 || systray.saturation != 0) { + traywin->damage = XDamageCreate(server.dsp, traywin->id, XDamageReportNonEmpty); + XCompositeRedirectWindow(server.dsp, traywin->id, CompositeRedirectManual); + } // show the window - XMapRaised(server.dsp, traywin->id); + if (!traywin->hide) + XMapWindow(server.dsp, traywin->tray_id); + if (!traywin->hide && !panel->is_hidden) + XMapRaised(server.dsp, traywin->id); // changed in systray force resize on panel panel->area.resize = 1; @@ -297,24 +450,26 @@ void remove_icon(TrayWindow *traywin) { XErrorHandler old; - Window id = traywin->id; // remove from our list systray.list_icons = g_slist_remove(systray.list_icons, traywin); - g_free(traywin); - systray.area.resize = 1; - systray.area.redraw = 1; + systray.area.resize = 1; //printf("remove_icon id %lx, %d\n", traywin->id); - XSelectInput(server.dsp, id, NoEventMask); + XSelectInput(server.dsp, traywin->tray_id, NoEventMask); + if (traywin->damage) + XDamageDestroy(server.dsp, traywin->damage); // reparent to root error = FALSE; old = XSetErrorHandler(window_error_handler); - XUnmapWindow(server.dsp, id); - XReparentWindow(server.dsp, id, server.root_win, 0, 0); + if (!traywin->hide) + XUnmapWindow(server.dsp, traywin->tray_id); + XReparentWindow(server.dsp, traywin->tray_id, server.root_win, 0, 0); + XDestroyWindow(server.dsp, traywin->id); XSync(server.dsp, False); XSetErrorHandler(old); + g_free(traywin); // changed in systray force resize on panel Panel *panel = systray.area.panel; @@ -349,6 +504,53 @@ } } +void systray_render_icon_now(void* t) +{ + TrayWindow* traywin = t; + traywin->render_timeout = 0; + + // good systray icons support 32 bit depth, but some icons are still 24 bit. + // We create a heuristic mask for these icons, i.e. we get the rgb value in the top left corner, and + // mask out all pixel with the same rgb value + Panel* panel = systray.area.panel; + imlib_context_set_drawable(traywin->id); + Imlib_Image image = imlib_create_image_from_drawable(0, 0, 0, traywin->width, traywin->height, 0); + if (image == 0) + return; + + imlib_context_set_image(image); + imlib_image_set_has_alpha(1); + DATA32* data = imlib_image_get_data(); + if (traywin->depth == 24) { + createHeuristicMask(data, traywin->width, traywin->height); + } + if (systray.alpha != 100 || systray.brightness != 0 || systray.saturation != 0) + adjust_asb(data, traywin->width, traywin->height, systray.alpha, (float)systray.saturation/100, (float)systray.brightness/100); + imlib_image_put_back_data(data); + XCopyArea(server.dsp, render_background, systray.area.pix, server.gc, traywin->x-systray.area.posx, traywin->y-systray.area.posy, traywin->width, traywin->height, traywin->x-systray.area.posx, traywin->y-systray.area.posy); + if ( !real_transparency ) { + imlib_context_set_drawable(systray.area.pix); + imlib_render_image_on_drawable(traywin->x-systray.area.posx, traywin->y-systray.area.posy); + } + else { + render_image(systray.area.pix, traywin->x-systray.area.posx, traywin->y-systray.area.posy, traywin->width, traywin->height); + } + XCopyArea(server.dsp, systray.area.pix, panel->main_win, server.gc, traywin->x-systray.area.posx, traywin->y-systray.area.posy, traywin->width, traywin->height, traywin->x, traywin->y); + imlib_free_image_and_decache(); + + if (traywin->damage) + XDamageSubtract(server.dsp, traywin->damage, None, None); + XFlush(server.dsp); +} + + +void systray_render_icon(TrayWindow* traywin) +{ + // wine tray icons update whenever mouse is over them, so we limit the updates to 50 ms + if (traywin->render_timeout == 0) + traywin->render_timeout = add_timeout(50, 0, systray_render_icon_now, traywin); +} + void refresh_systray_icon() { @@ -356,8 +558,17 @@ GSList *l; for (l = systray.list_icons; l ; l = l->next) { traywin = (TrayWindow*)l->data; - XClearArea(server.dsp, traywin->id, 0, 0, traywin->width, traywin->height, True); + if (traywin->hide) continue; + if (real_transparency || systray.alpha != 100 || systray.brightness != 0 || systray.saturation != 0) + systray_render_icon(traywin); + else { + // comment by andreas: I'm still not sure, what exactly we need to do here... Somehow trayicons which do not + // offer the same depth as tint2 does, need to draw a background pixmap, but this cannot be done with + // XCopyArea... So we actually need XRenderComposite??? +// Pixmap pix = XCreatePixmap(server.dsp, server.root_win, traywin->width, traywin->height, server.depth); +// XCopyArea(server.dsp, panel->temp_pmap, pix, server.gc, traywin->x, traywin->y, traywin->width, traywin->height, 0, 0); +// XSetWindowBackgroundPixmap(server.dsp, traywin->id, pix); + XClearArea(server.dsp, traywin->tray_id, 0, 0, traywin->width, traywin->height, True); + } } } - - diff -Nru tint2-0.7.1/src/systray/systraybar.h tint2-0.9/src/systray/systraybar.h --- tint2-0.7.1/src/systray/systraybar.h 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/systray/systraybar.h 2010-01-09 00:11:01.000000000 +0000 @@ -12,6 +12,8 @@ #include "common.h" #include "area.h" +#include "timer.h" +#include // XEMBED messages #define XEMBED_EMBEDDED_NOTIFY 0 @@ -20,42 +22,54 @@ typedef struct { - // always start with area - Area area; + // always start with area + Area area; GSList *list_icons; + int sort; + int alpha, saturation, brightness; } Systraybar; typedef struct { - Window id; - int x, y; - int width, height; + Window id; + Window tray_id; + int x, y; + int width, height; + // TODO: manage icon's show/hide + int hide; + int depth; + Damage damage; + timeout* render_timeout; } TrayWindow; +// net_sel_win != None when protocol started extern Window net_sel_win; extern Systraybar systray; extern int refresh_systray; - +extern int systray_enabled; +extern int systray_max_icon_size; void init_systray(); +void init_systray_panel(void *p); void cleanup_systray(); -void draw_systray(void *obj, cairo_t *c, int active); +void draw_systray(void *obj, cairo_t *c); void resize_systray(void *obj); // systray protocol -int init_net(); -void cleanup_net(); +// many tray icon doesn't manage stop/restart of the systray manager +void start_net(); +void stop_net(); void net_message(XClientMessageEvent *e); gboolean add_icon(Window id); void remove_icon(TrayWindow *traywin); void refresh_systray_icon(); - +void systray_render_icon(TrayWindow* traywin); void kde_update_icons(); #endif diff -Nru tint2-0.7.1/src/taskbar/taskbar.c tint2-0.9/src/taskbar/taskbar.c --- tint2-0.7.1/src/taskbar/taskbar.c 2009-07-19 21:28:51.000000000 +0100 +++ tint2-0.9/src/taskbar/taskbar.c 2010-01-18 20:16:32.000000000 +0000 @@ -33,11 +33,23 @@ #include "panel.h" +/* win_to_task_table holds for every Window an array of tasks. Usually the array contains only one + element. However for omnipresent windows (windows which are visible in every taskbar) the array + contains to every Task* on each panel a pointer (i.e. GPtrArray.len == server.nb_desktop) +*/ +GHashTable* win_to_task_table = 0; + +guint win_hash(gconstpointer key) { return (guint)*((Window*)key); } +gboolean win_compare(gconstpointer a, gconstpointer b) { return (*((Window*)a) == *((Window*)b)); } +void free_ptr_array(gpointer data) { g_ptr_array_free(data, 1); } void init_taskbar() { - Panel *panel; - int i, j; + Panel *panel; + int i, j; + + if (win_to_task_table == 0) + win_to_task_table = g_hash_table_new_full(win_hash, win_compare, free, free_ptr_array); for (i=0 ; i < nb_panel ; i++) { panel = &panel1[i]; @@ -48,36 +60,62 @@ } // taskbar - panel->g_taskbar._resize = resize_taskbar; - panel->g_taskbar.redraw = 1; - panel->g_taskbar.on_screen = 1; + panel->g_taskbar.area._resize = resize_taskbar; + panel->g_taskbar.area.redraw = 1; + panel->g_taskbar.area.on_screen = 1; if (panel_horizontal) { - panel->g_taskbar.posy = panel->area.pix.border.width + panel->area.paddingy; - panel->g_taskbar.height = panel->area.height - (2 * panel->g_taskbar.posy); + panel->g_taskbar.area.posy = panel->area.bg->border.width + panel->area.paddingy; + panel->g_taskbar.area.height = panel->area.height - (2 * panel->g_taskbar.area.posy); } else { - panel->g_taskbar.posx = panel->area.pix.border.width + panel->area.paddingy; - panel->g_taskbar.width = panel->area.width - (2 * panel->g_taskbar.posx); + panel->g_taskbar.area.posx = panel->area.bg->border.width + panel->area.paddingy; + panel->g_taskbar.area.width = panel->area.width - (2 * panel->g_taskbar.area.posx); } // task panel->g_task.area._draw_foreground = draw_task; - panel->g_task.area.use_active = 1; panel->g_task.area.redraw = 1; panel->g_task.area.on_screen = 1; + if ((panel->g_task.config_asb_mask & (1<g_task.alpha[TASK_ACTIVE] = panel->g_task.alpha[TASK_NORMAL]; + panel->g_task.saturation[TASK_ACTIVE] = panel->g_task.saturation[TASK_NORMAL]; + panel->g_task.brightness[TASK_ACTIVE] = panel->g_task.brightness[TASK_NORMAL]; + } + if ((panel->g_task.config_asb_mask & (1<g_task.alpha[TASK_ICONIFIED] = panel->g_task.alpha[TASK_NORMAL]; + panel->g_task.saturation[TASK_ICONIFIED] = panel->g_task.saturation[TASK_NORMAL]; + panel->g_task.brightness[TASK_ICONIFIED] = panel->g_task.brightness[TASK_NORMAL]; + } + if ((panel->g_task.config_asb_mask & (1<g_task.alpha[TASK_URGENT] = panel->g_task.alpha[TASK_ACTIVE]; + panel->g_task.saturation[TASK_URGENT] = panel->g_task.saturation[TASK_ACTIVE]; + panel->g_task.brightness[TASK_URGENT] = panel->g_task.brightness[TASK_ACTIVE]; + } + if ((panel->g_task.config_font_mask & (1<g_task.font[TASK_ACTIVE] = panel->g_task.font[TASK_NORMAL]; + if ((panel->g_task.config_font_mask & (1<g_task.font[TASK_ICONIFIED] = panel->g_task.font[TASK_NORMAL]; + if ((panel->g_task.config_font_mask & (1<g_task.font[TASK_URGENT] = panel->g_task.font[TASK_ACTIVE]; + if ((panel->g_task.config_background_mask & (1<g_task.background[TASK_ACTIVE] = panel->g_task.background[TASK_NORMAL]; + if ((panel->g_task.config_background_mask & (1<g_task.background[TASK_ICONIFIED] = panel->g_task.background[TASK_NORMAL]; + if ((panel->g_task.config_background_mask & (1<g_task.background[TASK_URGENT] = panel->g_task.background[TASK_ACTIVE]; + if (panel_horizontal) { - panel->g_task.area.posy = panel->g_taskbar.posy + panel->g_taskbar.pix.border.width + panel->g_taskbar.paddingy; + panel->g_task.area.posy = panel->g_taskbar.area.posy + panel->g_taskbar.bg->border.width + panel->g_taskbar.area.paddingy; panel->g_task.area.height = panel->area.height - (2 * panel->g_task.area.posy); } else { - panel->g_task.area.posx = panel->g_taskbar.posx + panel->g_taskbar.pix.border.width + panel->g_taskbar.paddingy; + panel->g_task.area.posx = panel->g_taskbar.area.posx + panel->g_taskbar.bg->border.width + panel->g_taskbar.area.paddingy; panel->g_task.area.width = panel->area.width - (2 * panel->g_task.area.posx); panel->g_task.area.height = panel->g_task.maximum_height; } - if (panel->g_task.area.pix.border.rounded > panel->g_task.area.height/2) { - panel->g_task.area.pix.border.rounded = panel->g_task.area.height/2; - panel->g_task.area.pix_active.border.rounded = panel->g_task.area.pix.border.rounded; + int k; + for (k=0; kg_task.background[k]->border.rounded > panel->g_task.area.height/2) { + printf("task%sbackground_id is too big. Please fix your tint2rc\n", k==0 ? "_" : k==1 ? "_active_" : k==2 ? "_iconified_" : "_urgent_"); + g_array_append_val(backgrounds, *panel->g_task.background[k]); + panel->g_task.background[k] = &g_array_index(backgrounds, Background, backgrounds->len-1); + panel->g_task.background[k]->border.rounded = panel->g_task.area.height/2; + } } // compute vertical position : text and icon @@ -87,7 +125,7 @@ if (!panel->g_task.maximum_width && panel_horizontal) panel->g_task.maximum_width = server.monitor[panel->monitor].width; - panel->g_task.text_posx = panel->g_task.area.pix.border.width + panel->g_task.area.paddingxlr; + panel->g_task.text_posx = panel->g_task.background[0]->border.width + panel->g_task.area.paddingxlr; panel->g_task.text_posy = (panel->g_task.area.height - height) / 2.0; if (panel->g_task.icon) { panel->g_task.icon_size1 = panel->g_task.area.height - (2 * panel->g_task.area.paddingy); @@ -103,6 +141,8 @@ tskbar = &panel->taskbar[j]; memcpy(&tskbar->area, &panel->g_taskbar, sizeof(Area)); tskbar->desktop = j; + if (j == server.desktop && panel->g_taskbar.use_active) + tskbar->area.bg = panel->g_taskbar.bg_active; // add taskbar to the panel panel->area.list = g_slist_append(panel->area.list, tskbar); @@ -110,121 +150,95 @@ } } - +void taskbar_remove_task(gpointer key, gpointer value, gpointer user_data) {remove_task(task_get_task(*(Window*)key)); } void cleanup_taskbar() { - Panel *panel; + Panel *panel; Taskbar *tskbar; - int i, j; - GSList *l0; - Task *tsk; + int i, j; + if (win_to_task_table) g_hash_table_foreach(win_to_task_table, taskbar_remove_task, 0); for (i=0 ; i < nb_panel ; i++) { panel = &panel1[i]; - for (j=0 ; j < panel->nb_desktop ; j++) { tskbar = &panel->taskbar[j]; - l0 = tskbar->area.list; - while (l0) { - tsk = l0->data; - l0 = l0->next; - // careful : remove_task change l0->next - remove_task (tsk); - } free_area (&tskbar->area); - // remove taskbar from the panel panel->area.list = g_slist_remove(panel->area.list, tskbar); } - } - - for (i=0 ; i < nb_panel ; i++) { - panel = &panel1[i]; if (panel->taskbar) { free(panel->taskbar); panel->taskbar = 0; } } + + if (win_to_task_table) { + g_hash_table_destroy(win_to_task_table); + win_to_task_table = 0; + } } Task *task_get_task (Window win) { - Task *tsk; - GSList *l0; - int i, j; - - for (i=0 ; i < nb_panel ; i++) { - for (j=0 ; j < panel1[i].nb_desktop ; j++) { - for (l0 = panel1[i].taskbar[j].area.list; l0 ; l0 = l0->next) { - tsk = l0->data; - if (win == tsk->win) - return tsk; - } - } - } - return 0; + GPtrArray* task_group = task_get_tasks(win); + if (task_group) + return g_ptr_array_index(task_group, 0); + else + return 0; +} + + +GPtrArray* task_get_tasks(Window win) +{ + return g_hash_table_lookup(win_to_task_table, &win); } void task_refresh_tasklist () { - Window *win, active_win; - int num_results, i, j, k; - GSList *l0; - Task *tsk; - - win = server_get_property (server.root_win, server.atom._NET_CLIENT_LIST, XA_WINDOW, &num_results); - if (!win) return; - - // Remove any old and set active win - active_win = window_get_active (); - if (task_active) { - task_active->area.is_active = 0; - task_active = 0; - } + Window *win; + int num_results, i; - for (i=0 ; i < nb_panel ; i++) { - for (j=0 ; j < panel1[i].nb_desktop ; j++) { - l0 = panel1[i].taskbar[j].area.list; - while (l0) { - tsk = l0->data; - l0 = l0->next; - - if (tsk->win == active_win) { - tsk->area.is_active = 1; - task_active = tsk; - } - - for (k = 0; k < num_results; k++) { - if (tsk->win == win[k]) break; - } - // careful : remove_task change l0->next - if (k == num_results) remove_task (tsk); - } - } - } + win = server_get_property (server.root_win, server.atom._NET_CLIENT_LIST, XA_WINDOW, &num_results); + if (!win) return; + + // Remove any old and set active win + // remark from Andreas: This seems unneccessary... +// active_task(); + + GList* win_list = g_hash_table_get_keys(win_to_task_table); + GList* it; + for (it=win_list; it; it=it->next) { + for (i = 0; i < num_results; i++) + if (*((Window*)it->data) == win[i]) + break; + if (i == num_results) + taskbar_remove_task(it->data, 0, 0); + } + g_list_free(win_list); - // Add any new - for (i = 0; i < num_results; i++) - if (!task_get_task (win[i])) - add_task (win[i]); + // Add any new + for (i = 0; i < num_results; i++) + if (!task_get_task (win[i])) + add_task (win[i]); - XFree (win); + XFree (win); } void resize_taskbar(void *obj) { Taskbar *taskbar = (Taskbar*)obj; - Panel *panel = (Panel*)taskbar->area.panel; - Task *tsk; - GSList *l; - int task_count; + Panel *panel = (Panel*)taskbar->area.panel; + Task *tsk; + GSList *l; + int task_count, border_width; -//printf("resize_taskbar : posx et width des taches\n"); + //printf("resize_taskbar : posx et width des taches\n"); + taskbar->area.redraw = 1; - taskbar->area.redraw = 1; + border_width = taskbar->area.bg->border.width; if (panel_horizontal) { int pixel_width, modulo_width=0; @@ -234,8 +248,8 @@ task_count = g_slist_length(taskbar->area.list); if (!task_count) pixel_width = panel->g_task.maximum_width; else { - taskbar_width = taskbar->area.width - (2 * panel->g_taskbar.pix.border.width) - (2 * panel->g_taskbar.paddingxlr); - if (task_count>1) taskbar_width -= ((task_count-1) * panel->g_taskbar.paddingx); + taskbar_width = taskbar->area.width - (2 * border_width) - (2 * panel->g_taskbar.area.paddingxlr); + if (task_count>1) taskbar_width -= ((task_count-1) * panel->g_taskbar.area.paddingx); pixel_width = taskbar_width / task_count; if (pixel_width > panel->g_task.maximum_width) @@ -244,27 +258,24 @@ modulo_width = taskbar_width % task_count; } - if ((taskbar->task_width == pixel_width) && (taskbar->task_modulo == modulo_width)) { - } - else { - taskbar->task_width = pixel_width; - taskbar->task_modulo = modulo_width; - taskbar->text_width = pixel_width - panel->g_task.text_posx - panel->g_task.area.pix.border.width - panel->g_task.area.paddingx; - } + taskbar->task_width = pixel_width; + taskbar->task_modulo = modulo_width; + taskbar->text_width = pixel_width - panel->g_task.text_posx - panel->g_task.area.bg->border.width - panel->g_task.area.paddingx; // change pos_x and width for all tasks - x = taskbar->area.posx + taskbar->area.pix.border.width + taskbar->area.paddingxlr; + x = taskbar->area.posx + border_width + taskbar->area.paddingxlr; for (l = taskbar->area.list; l ; l = l->next) { tsk = l->data; + if (!tsk->area.on_screen) continue; tsk->area.posx = x; + set_task_redraw(tsk); // always redraw task, because the background could have changed (taskbar_active_id) tsk->area.width = pixel_width; - tsk->area.redraw = 1; if (modulo_width) { tsk->area.width++; modulo_width--; } - x += tsk->area.width + panel->g_taskbar.paddingx; + x += tsk->area.width + panel->g_taskbar.area.paddingx; } } else { @@ -275,8 +286,8 @@ task_count = g_slist_length(taskbar->area.list); if (!task_count) pixel_height = panel->g_task.maximum_height; else { - taskbar_height = taskbar->area.height - (2 * panel->g_taskbar.pix.border.width) - (2 * panel->g_taskbar.paddingxlr); - if (task_count>1) taskbar_height -= ((task_count-1) * panel->g_taskbar.paddingx); + taskbar_height = taskbar->area.height - (2 * border_width) - (2 * panel->g_taskbar.area.paddingxlr); + if (task_count>1) taskbar_height -= ((task_count-1) * panel->g_taskbar.area.paddingx); pixel_height = taskbar_height / task_count; if (pixel_height > panel->g_task.maximum_height) @@ -285,30 +296,24 @@ modulo_height = taskbar_height % task_count; } - if ((taskbar->task_width == pixel_height) && (taskbar->task_modulo == modulo_height)) { - } - else { - taskbar->task_width = pixel_height; - taskbar->task_modulo = modulo_height; - taskbar->text_width = taskbar->area.width - (2 * panel->g_taskbar.paddingy) - panel->g_task.text_posx - panel->g_task.area.pix.border.width - panel->g_task.area.paddingx; - } + taskbar->task_width = pixel_height; + taskbar->task_modulo = modulo_height; + taskbar->text_width = taskbar->area.width - (2 * panel->g_taskbar.area.paddingy) - panel->g_task.text_posx - panel->g_task.area.bg->border.width - panel->g_task.area.paddingx; // change pos_y and height for all tasks - y = taskbar->area.posy + taskbar->area.pix.border.width + taskbar->area.paddingxlr; + y = taskbar->area.posy + border_width + taskbar->area.paddingxlr; for (l = taskbar->area.list; l ; l = l->next) { tsk = l->data; + if (!tsk->area.on_screen) continue; tsk->area.posy = y; + set_task_redraw(tsk); // always redraw task, because the background could have changed (taskbar_active_id) tsk->area.height = pixel_height; - tsk->area.redraw = 1; if (modulo_height) { tsk->area.height++; modulo_height--; } - y += tsk->area.height + panel->g_taskbar.paddingx; + y += tsk->area.height + panel->g_taskbar.area.paddingx; } } } - - - diff -Nru tint2-0.7.1/src/taskbar/taskbar.h tint2-0.9/src/taskbar/taskbar.h --- tint2-0.7.1/src/taskbar/taskbar.h 2009-07-19 21:28:51.000000000 +0100 +++ tint2-0.9/src/taskbar/taskbar.h 2010-01-09 18:29:00.000000000 +0000 @@ -10,25 +10,34 @@ #include "task.h" - +extern GHashTable* win_to_task_table; +// tint2 use one taskbar per desktop. typedef struct { - // always start with area - Area area; + // always start with area + Area area; - int desktop; + int desktop; - // task parameters - int task_width; - int task_modulo; - int text_width; + // task parameters + int task_width; + int task_modulo; + int text_width; } Taskbar; +typedef struct { + //always start with area + Area area; + Background* bg; + Background* bg_active; + int use_active; +} Global_taskbar; void init_taskbar(); void cleanup_taskbar(); Task *task_get_task (Window win); +GPtrArray* task_get_tasks(Window win); void task_refresh_tasklist (); void resize_taskbar(void *obj); diff -Nru tint2-0.7.1/src/taskbar/task.c tint2-0.9/src/taskbar/task.c --- tint2-0.7.1/src/taskbar/task.c 2009-07-19 21:28:51.000000000 +0100 +++ tint2-0.9/src/taskbar/task.c 2010-01-10 22:16:27.000000000 +0000 @@ -25,274 +25,326 @@ #include #include #include -#include +#include #include "window.h" #include "task.h" +#include "taskbar.h" #include "server.h" #include "panel.h" +#include "tooltip.h" +#include "timer.h" +static timeout* urgent_timeout = 0; +static GSList* urgent_list = 0; + +const char* task_get_tooltip(void* obj) +{ + Task* t = obj; + return t->title; +} Task *add_task (Window win) { - if (!win) return 0; - if (window_is_hidden(win)) return 0; + if (!win) return 0; + if (window_is_hidden(win)) return 0; - int monitor; + int monitor; + if (nb_panel > 1) { + monitor = window_get_monitor (win); + if (monitor >= nb_panel) monitor = 0; + } + else monitor = 0; Task new_tsk; - new_tsk.win = win; - new_tsk.area.panel = &panel1[0]; - new_tsk.desktop = window_get_desktop (win); - if (nb_panel > 1) monitor = window_get_monitor (win); - else monitor = 0; + new_tsk.win = win; + new_tsk.desktop = window_get_desktop (win); + new_tsk.area.panel = &panel1[monitor]; + new_tsk.current_state = window_is_iconified(win) ? TASK_ICONIFIED : TASK_NORMAL; // allocate only one title and one icon // even with task_on_all_desktop and with task_on_all_panel - new_tsk.title = 0; - new_tsk.icon_data = 0; - get_title(&new_tsk); - get_icon(&new_tsk); + new_tsk.title = 0; + int k; + for (k=0; ktitle, desktop, monitor); - XSelectInput (server.dsp, new_tsk.win, PropertyChangeMask|StructureNotifyMask); + //printf("task %s : desktop %d, monitor %d\n", new_tsk->title, desktop, monitor); + XSelectInput (server.dsp, new_tsk.win, PropertyChangeMask|StructureNotifyMask); + GPtrArray* task_group = g_ptr_array_new(); Taskbar *tskbar; - Task *new_tsk2=0; - int i, j; - for (i=0 ; i < nb_panel ; i++) { - for (j=0 ; j < panel1[i].nb_desktop ; j++) { - if (new_tsk.desktop != ALLDESKTOP && new_tsk.desktop != j) continue; - if (nb_panel > 1 && panel1[i].monitor != monitor) continue; - - tskbar = &panel1[i].taskbar[j]; - new_tsk2 = malloc(sizeof(Task)); - memcpy(&new_tsk2->area, &panel1[i].g_task.area, sizeof(Area)); - new_tsk2->area.parent = tskbar; - new_tsk2->win = new_tsk.win; - new_tsk2->desktop = new_tsk.desktop; - new_tsk2->title = new_tsk.title; - new_tsk2->icon_data = new_tsk.icon_data; - new_tsk2->icon_width = new_tsk.icon_width; - new_tsk2->icon_height = new_tsk.icon_height; - tskbar->area.list = g_slist_append(tskbar->area.list, new_tsk2); - tskbar->area.resize = 1; - //printf("add_task panel %d, desktop %d, task %s\n", i, j, new_tsk2->title); + Task *new_tsk2=0; + int j; + for (j=0 ; j < panel1[monitor].nb_desktop ; j++) { + if (new_tsk.desktop != ALLDESKTOP && new_tsk.desktop != j) continue; + + tskbar = &panel1[monitor].taskbar[j]; + new_tsk2 = malloc(sizeof(Task)); + memcpy(&new_tsk2->area, &panel1[monitor].g_task.area, sizeof(Area)); + new_tsk2->area.parent = tskbar; + new_tsk2->win = new_tsk.win; + new_tsk2->desktop = new_tsk.desktop; + new_tsk2->current_state = -1; // to update the current state later in set_task_state... + if (new_tsk2->desktop == ALLDESKTOP && server.desktop != j) { + // hide ALLDESKTOP task on non-current desktop + new_tsk2->area.on_screen = 0; + } + new_tsk2->title = new_tsk.title; + new_tsk2->area._get_tooltip_text = task_get_tooltip; + for (k=0; kicon[k] = new_tsk.icon[k]; + new_tsk2->state_pix[k] = 0; } + new_tsk2->icon_width = new_tsk.icon_width; + new_tsk2->icon_height = new_tsk.icon_height; + tskbar->area.list = g_slist_append(tskbar->area.list, new_tsk2); + tskbar->area.resize = 1; + g_ptr_array_add(task_group, new_tsk2); + //printf("add_task panel %d, desktop %d, task %s\n", i, j, new_tsk2->title); } + Window* key = malloc(sizeof(Window)); + *key = new_tsk.win; + g_hash_table_insert(win_to_task_table, key, task_group); + set_task_state(new_tsk2, new_tsk.current_state); + + if (window_is_urgent(win)) + add_urgent(new_tsk2); + return new_tsk2; } void remove_task (Task *tsk) { - if (!tsk) return; + if (!tsk) return; - Window win = tsk->win; - int desktop = tsk->desktop; + Window win = tsk->win; // free title and icon just for the first task // even with task_on_all_desktop and with task_on_all_panel //printf("remove_task %s %d\n", tsk->title, tsk->desktop); if (tsk->title) free (tsk->title); - if (tsk->icon_data) - free (tsk->icon_data); - - int i, j; - Task *tsk2; - Taskbar *tskbar; - for (i=0 ; i < nb_panel ; i++) { - for (j=0 ; j < panel1[i].nb_desktop ; j++) { - if (desktop != ALLDESKTOP && desktop != j) continue; - - GSList *l0; - tskbar = &panel1[i].taskbar[j]; - for (l0 = tskbar->area.list; l0 ; ) { - tsk2 = l0->data; - l0 = l0->next; - if (win == tsk2->win) { - tskbar->area.list = g_slist_remove(tskbar->area.list, tsk2); - tskbar->area.resize = 1; - - if (tsk2 == task_active) - task_active = 0; - if (tsk2 == task_drag) - task_drag = 0; - - XFreePixmap (server.dsp, tsk2->area.pix.pmap); - XFreePixmap (server.dsp, tsk2->area.pix_active.pmap); - free(tsk2); - } - } + int k; + for (k=0; kicon[k]) { + imlib_context_set_image(tsk->icon[k]); + imlib_free_image(); + tsk->icon[k] = 0; + if (tsk->state_pix[k]) XFreePixmap(server.dsp, tsk->state_pix[k]); } } + int i; + Task *tsk2; + Taskbar *tskbar; + GPtrArray* task_group = g_hash_table_lookup(win_to_task_table, &win); + for (i=0; ilen; ++i) { + tsk2 = g_ptr_array_index(task_group, i); + tskbar = tsk2->area.parent; + tskbar->area.list = g_slist_remove(tskbar->area.list, tsk2); + tskbar->area.resize = 1; + if (tsk2 == task_active) task_active = 0; + if (tsk2 == task_drag) task_drag = 0; + if (g_slist_find(urgent_list, tsk2)) del_urgent(tsk2); + free(tsk2); + } + g_hash_table_remove(win_to_task_table, &win); } void get_title(Task *tsk) { - Panel *panel = tsk->area.panel; - char *title, *name; + Panel *panel = tsk->area.panel; + char *title, *name; - if (!panel->g_task.text) return; + if (!panel->g_task.text && !g_tooltip.enabled) return; - name = server_get_property (tsk->win, server.atom._NET_WM_VISIBLE_NAME, server.atom.UTF8_STRING, 0); - if (!name || !strlen(name)) { - name = server_get_property (tsk->win, server.atom._NET_WM_NAME, server.atom.UTF8_STRING, 0); - if (!name || !strlen(name)) { - name = server_get_property (tsk->win, server.atom.WM_NAME, XA_STRING, 0); - if (!name || !strlen(name)) { - name = malloc(10); - strcpy(name, "Untitled"); - } - } - } - - // add space before title - title = malloc(strlen(name)+2); - if (panel->g_task.icon) strcpy(title, " "); - else title[0] = 0; - strcat(title, name); - if (name) XFree (name); + name = server_get_property (tsk->win, server.atom._NET_WM_VISIBLE_NAME, server.atom.UTF8_STRING, 0); + if (!name || !strlen(name)) { + name = server_get_property (tsk->win, server.atom._NET_WM_NAME, server.atom.UTF8_STRING, 0); + if (!name || !strlen(name)) { + name = server_get_property (tsk->win, server.atom.WM_NAME, XA_STRING, 0); + if (!name || !strlen(name)) { + name = malloc(10); + strcpy(name, "Untitled"); + } + } + } - tsk->area.redraw = 1; - if (tsk->title) - free(tsk->title); - tsk->title = title; + // add space before title + title = malloc(strlen(name)+2); + if (panel->g_task.icon) strcpy(title, " "); + else title[0] = 0; + strcat(title, name); + if (name) XFree (name); + + if (tsk->title) + free(tsk->title); + + tsk->title = title; + GPtrArray* task_group = task_get_tasks(tsk->win); + if (task_group) { + int i; + for (i=0; ilen; ++i) { + Task* tsk2 = g_ptr_array_index(task_group, i); + tsk2->title = tsk->title; + set_task_redraw(tsk2); + } + } + set_task_redraw(tsk); } void get_icon (Task *tsk) { - Panel *panel = tsk->area.panel; - if (!panel->g_task.icon) return; + Panel *panel = tsk->area.panel; + if (!panel->g_task.icon) return; + int i; + Imlib_Image img = NULL; + XWMHints *hints = 0; + long *data = 0; + + int k; + for (k=0; kicon[k]) { + imlib_context_set_image(tsk->icon[k]); + imlib_free_image(); + tsk->icon[k] = 0; + } + } - if (tsk->icon_data) { - free (tsk->icon_data); - tsk->icon_data = 0; - } - tsk->area.redraw = 1; - - long *data; - int num; - data = server_get_property (tsk->win, server.atom._NET_WM_ICON, XA_CARDINAL, &num); - if (data) { - // get ARGB icon - int w, h; - long *tmp_data; - tmp_data = get_best_icon (data, get_icon_count (data, num), num, &w, &h, panel->g_task.icon_size1); - - tsk->icon_width = w; - tsk->icon_height = h; - tsk->icon_data = malloc (w * h * sizeof (long)); - memcpy (tsk->icon_data, tmp_data, w * h * sizeof (long)); - - XFree (data); - } - else { - // get Pixmap icon - XWMHints *hints = XGetWMHints(server.dsp, tsk->win); - if (hints) { - if (hints->flags & IconPixmapHint && hints->icon_pixmap != 0) { - // get width, height and depth for the pixmap + data = server_get_property (tsk->win, server.atom._NET_WM_ICON, XA_CARDINAL, &i); + if (data) { + // get ARGB icon + int w, h; + long *tmp_data; + + tmp_data = get_best_icon (data, get_icon_count (data, i), i, &w, &h, panel->g_task.icon_size1); + +#ifdef __x86_64__ + DATA32 icon_data[w * h]; + int length = w * h; + for (i = 0; i < length; ++i) + icon_data[i] = tmp_data[i]; + img = imlib_create_image_using_copied_data (w, h, icon_data); +#else + img = imlib_create_image_using_data (w, h, (DATA32*)tmp_data); +#endif + } + else { + // get Pixmap icon + hints = XGetWMHints(server.dsp, tsk->win); + if (hints) { + if (hints->flags & IconPixmapHint && hints->icon_pixmap != 0) { + // get width, height and depth for the pixmap Window root; int icon_x, icon_y; uint border_width, bpp; - uint icon_width, icon_height; - - XGetGeometry(server.dsp, hints->icon_pixmap, &root, &icon_x, &icon_y, &icon_width, &icon_height, &border_width, &bpp); + uint w, h; - //printf(" get_pixmap\n"); - Imlib_Image img; + //printf(" get pixmap\n"); + XGetGeometry(server.dsp, hints->icon_pixmap, &root, &icon_x, &icon_y, &w, &h, &border_width, &bpp); imlib_context_set_drawable(hints->icon_pixmap); - img = imlib_create_image_from_drawable(hints->icon_mask, 0, 0, icon_width, icon_height, 0); - imlib_context_set_image(img); - unsigned int *data = imlib_image_get_data(); - if (!data) { - return; - } - tsk->icon_width = imlib_image_get_width(); - tsk->icon_height = imlib_image_get_height(); - tsk->icon_data = malloc (tsk->icon_width * tsk->icon_height * sizeof (long)); - memcpy (tsk->icon_data, data, tsk->icon_width * tsk->icon_height * sizeof (long)); - imlib_free_image(); + img = imlib_create_image_from_drawable(hints->icon_mask, 0, 0, w, h, 0); } - XFree(hints); } - } -} - - -void draw_task_icon (Task *tsk, int text_width, int active) -{ - if (tsk->icon_data == 0) return; - - Pixmap *pmap = (active == 0) ? (&tsk->area.pix.pmap) : (&tsk->area.pix_active.pmap); - - /* Find pos */ - int pos_x; - Panel *panel = (Panel*)tsk->area.panel; - if (panel->g_task.centered) { - if (panel->g_task.text) - pos_x = (tsk->area.width - text_width - panel->g_task.icon_size1) / 2; - else - pos_x = (tsk->area.width - panel->g_task.icon_size1) / 2; - } - else pos_x = panel->g_task.area.paddingxlr + panel->g_task.area.pix.border.width; - - /* Render */ - Imlib_Image icon; - Imlib_Color_Modifier cmod; - DATA8 red[256], green[256], blue[256], alpha[256]; - - // TODO: cpu improvement : compute only when icon changed - DATA32 *data; - /* do we have 64bit? => long = 8bit */ - if (sizeof(long) != 4) { - int length = tsk->icon_width * tsk->icon_height; - data = malloc(sizeof(DATA32) * length); - int i; - for (i = 0; i < length; ++i) - data[i] = tsk->icon_data[i]; - } - else data = (DATA32 *) tsk->icon_data; + } + if (img == NULL) { + imlib_context_set_image(default_icon); + img = imlib_clone_image(); + } - icon = imlib_create_image_using_data (tsk->icon_width, tsk->icon_height, data); - imlib_context_set_image (icon); - imlib_context_set_drawable (*pmap); + // transform icons + imlib_context_set_image(img); + imlib_image_set_has_alpha(1); + int w, h; + w = imlib_image_get_width(); + h = imlib_image_get_height(); + Imlib_Image orig_image = imlib_create_cropped_scaled_image(0, 0, w, h, panel->g_task.icon_size1, panel->g_task.icon_size1); + imlib_free_image(); + + imlib_context_set_image(orig_image); + tsk->icon_width = imlib_image_get_width(); + tsk->icon_height = imlib_image_get_height(); + for (k=0; kicon[k] = imlib_clone_image(); + imlib_context_set_image(tsk->icon[k]); + DATA32 *data32; + if (panel->g_task.alpha[k] != 100 || panel->g_task.saturation[k] != 0 || panel->g_task.brightness[k] != 0) { + data32 = imlib_image_get_data(); + adjust_asb(data32, tsk->icon_width, tsk->icon_height, panel->g_task.alpha[k], (float)panel->g_task.saturation[k]/100, (float)panel->g_task.brightness[k]/100); + imlib_image_put_back_data(data32); + } + } + imlib_context_set_image(orig_image); + imlib_free_image(); - cmod = imlib_create_color_modifier (); - imlib_context_set_color_modifier (cmod); - imlib_image_set_has_alpha (1); - imlib_get_color_modifier_tables (red, green, blue, alpha); + if (hints) + XFree(hints); + if (data) + XFree (data); + + GPtrArray* task_group = task_get_tasks(tsk->win); + if (task_group) { + for (i=0; ilen; ++i) { + Task* tsk2 = g_ptr_array_index(task_group, i); + tsk2->icon_width = tsk->icon_width; + tsk2->icon_height = tsk->icon_height; + int k; + for (k=0; kicon[k] = tsk->icon[k]; + set_task_redraw(tsk2); + } + } + set_task_redraw(tsk); +} - int i, opacity; - opacity = (active == 0) ? (255*panel->g_task.font.alpha) : (255*panel->g_task.font_active.alpha); - for (i = 127; i < 256; i++) alpha[i] = opacity; - imlib_set_color_modifier_tables (red, green, blue, alpha); +void draw_task_icon (Task *tsk, int text_width) +{ + if (tsk->icon[tsk->current_state] == 0) return; - //imlib_render_image_on_drawable (pos_x, pos_y); - imlib_render_image_on_drawable_at_size (pos_x, panel->g_task.icon_posy, panel->g_task.icon_size1, panel->g_task.icon_size1); + // Find pos + int pos_x; + Panel *panel = (Panel*)tsk->area.panel; + if (panel->g_task.centered) { + if (panel->g_task.text) + pos_x = (tsk->area.width - text_width - panel->g_task.icon_size1) / 2; + else + pos_x = (tsk->area.width - panel->g_task.icon_size1) / 2; + } + else pos_x = panel->g_task.area.paddingxlr + tsk->area.bg->border.width; - imlib_free_color_modifier (); - imlib_free_image (); - if (sizeof(long) != 4) free(data); + // Render + imlib_context_set_image (tsk->icon[tsk->current_state]); + if (real_transparency) { + render_image(tsk->area.pix, pos_x, panel->g_task.icon_posy, imlib_image_get_width(), imlib_image_get_height() ); + } + else { + imlib_context_set_drawable(tsk->area.pix); + imlib_render_image_on_drawable (pos_x, panel->g_task.icon_posy); + } } -void draw_task (void *obj, cairo_t *c, int active) +void draw_task (void *obj, cairo_t *c) { - Task *tsk = obj; - PangoLayout *layout; - config_color *config_text; - int width=0, height; - Panel *panel = (Panel*)tsk->area.panel; + Task *tsk = obj; + tsk->state_pix[tsk->current_state] = tsk->area.pix; + PangoLayout *layout; + Color *config_text; + int width=0, height; + Panel *panel = (Panel*)tsk->area.panel; - if (panel->g_task.text) { + if (panel->g_task.text) { /* Layout */ layout = pango_cairo_create_layout (c); pango_layout_set_font_description (layout, panel->g_task.font_desc); @@ -309,8 +361,7 @@ pango_layout_get_pixel_size (layout, &width, &height); - if (active) config_text = &panel->g_task.font_active; - else config_text = &panel->g_task.font; + config_text = &panel->g_task.font[tsk->current_state]; cairo_set_source_rgba (c, config_text->color[0], config_text->color[1], config_text->color[2], config_text->alpha); @@ -325,11 +376,162 @@ pango_cairo_show_layout (c, layout); } g_object_unref (layout); - } + } - if (panel->g_task.icon) { - // icon use same opacity as text - draw_task_icon (tsk, width, active); - } + if (panel->g_task.icon) { + // icon use same opacity as text + draw_task_icon (tsk, width); + } } + +Task *next_task(Task *tsk) +{ + if (tsk == 0) + return 0; + + GSList *l0; + Task *tsk1; + Taskbar* tskbar = tsk->area.parent; + + for (l0 = tskbar->area.list; l0 ; l0 = l0->next) { + tsk1 = l0->data; + if (tsk1 == tsk) { + if (l0->next == 0) l0 = tskbar->area.list; + else l0 = l0->next; + return l0->data; + } + } + + return 0; +} + +Task *prev_task(Task *tsk) +{ + if (tsk == 0) + return 0; + + GSList *l0; + Task *tsk1, *tsk2; + Taskbar* tskbar = tsk->area.parent; + + tsk2 = 0; + for (l0 = tskbar->area.list; l0 ; l0 = l0->next) { + tsk1 = l0->data; + if (tsk1 == tsk) { + if (l0 == tskbar->area.list) { + l0 = g_slist_last ( l0 ); + tsk2 = l0->data; + } + return tsk2; + } + tsk2 = tsk1; + } + + return 0; +} + + +void active_task() +{ + if (task_active) { + set_task_state(task_active, window_is_iconified(task_active->win) ? TASK_ICONIFIED : TASK_NORMAL); + task_active = 0; + } + + Window w1 = window_get_active(); + //printf("Change active task %ld\n", w1); + + if (w1) { + Window w2; + if (XGetTransientForHint(server.dsp, w1, &w2) != 0) + if (w2 && !task_get_tasks(w1)) w1 = w2; + set_task_state((task_active = task_get_task(w1)), TASK_ACTIVE); + } +} + + +void set_task_state(Task *tsk, int state) +{ + if (tsk == 0 || state < 0 || state >= TASK_STATE_COUNT) + return; + + if (tsk->current_state != state) { + GPtrArray* task_group = task_get_tasks(tsk->win); + if (task_group) { + int i; + for (i=0; ilen; ++i) { + Task* tsk1 = g_ptr_array_index(task_group, i); + tsk1->current_state = state; + tsk1->area.bg = panel1[0].g_task.background[state]; + tsk1->area.pix = tsk1->state_pix[state]; + if (tsk1->state_pix[state] == 0) + tsk1->area.redraw = 1; + if (state == TASK_ACTIVE && g_slist_find(urgent_list, tsk1)) + del_urgent(tsk1); + } + panel_refresh = 1; + } + } +} + + +void set_task_redraw(Task* tsk) +{ + int k; + for (k=0; kstate_pix[k]) XFreePixmap(server.dsp, tsk->state_pix[k]); + tsk->state_pix[k] = 0; + } + tsk->area.pix = 0; + tsk->area.redraw = 1; +} + + +void blink_urgent(void* arg) +{ + GSList* urgent_task = urgent_list; + while (urgent_task) { + Task* t = urgent_task->data; + if ( t->urgent_tick < max_tick_urgent) { + if (t->urgent_tick++ % 2) + set_task_state(t, TASK_URGENT); + else + set_task_state(t, window_is_iconified(t->win) ? TASK_ICONIFIED : TASK_NORMAL); + } + urgent_task = urgent_task->next; + } + panel_refresh = 1; +} + + +void add_urgent(Task *tsk) +{ + if (!tsk) + return; + + // some programs set urgency hint although they are active + if ( task_active && task_active->win == tsk->win ) + return; + + tsk = task_get_task(tsk->win); // always add the first tsk for a task group (omnipresent windows) + tsk->urgent_tick = 0; + if (g_slist_find(urgent_list, tsk)) + return; + + // not yet in the list, so we have to add it + urgent_list = g_slist_prepend(urgent_list, tsk); + + if (urgent_timeout == 0) + urgent_timeout = add_timeout(10, 1000, blink_urgent, 0); +} + + +void del_urgent(Task *tsk) +{ + urgent_list = g_slist_remove(urgent_list, tsk); + if (urgent_list == 0) { + stop_timeout(urgent_timeout); + urgent_timeout = 0; + } +} diff -Nru tint2-0.7.1/src/taskbar/task.h tint2-0.9/src/taskbar/task.h --- tint2-0.7.1/src/taskbar/task.h 2009-07-19 21:28:51.000000000 +0100 +++ tint2-0.9/src/taskbar/task.h 2010-01-09 09:34:15.000000000 +0000 @@ -9,56 +9,75 @@ #include #include +#include #include "common.h" +enum { TASK_NORMAL, TASK_ACTIVE, TASK_ICONIFIED, TASK_URGENT, TASK_STATE_COUNT }; + // -------------------------------------------------- // global task parameter typedef struct { - Area area; + Area area; - int text; - int icon; - int centered; - - int icon_posy; - int icon_size1; - int maximum_width; - int maximum_height; - // starting position for text ~ task_padding + task_border + icon_size - double text_posx, text_posy; - - int font_shadow; - PangoFontDescription *font_desc; - config_color font; - config_color font_active; + int text; + int icon; + int centered; + + int icon_posy; + int icon_size1; + int maximum_width; + int maximum_height; + int alpha[TASK_STATE_COUNT]; + int saturation[TASK_STATE_COUNT]; + int brightness[TASK_STATE_COUNT]; + int config_asb_mask; + Background* background[TASK_STATE_COUNT]; + int config_background_mask; + // starting position for text ~ task_padding + task_border + icon_size + double text_posx, text_posy; + + int font_shadow; + PangoFontDescription *font_desc; + Color font[TASK_STATE_COUNT]; + int config_font_mask; } Global_task; typedef struct { - // always start with area - Area area; + // always start with area + Area area; - // TODO: group task with list of windows here - Window win; - int desktop; - long *icon_data; - int icon_width; - int icon_height; - char *title; + // TODO: group task with list of windows here + Window win; + int desktop; + int current_state; + Imlib_Image icon[TASK_STATE_COUNT]; + Pixmap state_pix[TASK_STATE_COUNT]; + unsigned int icon_width; + unsigned int icon_height; + char *title; + int urgent_tick; } Task; - Task *add_task (Window win); void remove_task (Task *tsk); -void draw_task (void *obj, cairo_t *c, int active); +void draw_task (void *obj, cairo_t *c); void get_icon (Task *tsk); void get_title(Task *tsk); +void active_task(); +void set_task_state(Task* tsk, int state); +void set_task_redraw(Task* tsk); + +Task *next_task (Task *tsk); +Task *prev_task (Task *tsk); +void add_urgent(Task *tsk); +void del_urgent(Task *tsk); #endif diff -Nru tint2-0.7.1/src/tint2conf/main.c tint2-0.9/src/tint2conf/main.c --- tint2-0.7.1/src/tint2conf/main.c 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/tint2conf/main.c 2010-01-16 09:44:11.000000000 +0000 @@ -0,0 +1,542 @@ +/************************************************************************** +* +* Tint2conf +* +* Copyright (C) 2009 Thierry lorthiois (lorthiois@bbsoft.fr) +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License version 2 +* as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +**************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../version.h" +#include "common.h" +#include "theme_view.h" + + + +// default config file and directory +char *g_path_config = 0; +char *g_path_dir = 0; +char *g_default_theme = 0; +int g_width; +int g_height; + +GtkWidget *g_window; +GtkWidget *g_theme_view; +GtkCellRenderer *g_renderer; + +static GtkUIManager *globalUIManager = NULL; + +static void menuAddWidget (GtkUIManager *, GtkWidget *, GtkContainer *); + +// action on menus +static void menuAdd (GtkWindow * parent); +//static void menuSaveAs (GtkWindow *parent); +static void menuDelete (void); +static void menuProperties (void); +static void menuRename (void); +static void menuQuit (void); +static void menuRefresh (void); +static void menuRefreshAll (void); +static void menuApply (void); +static void menuAbout(GtkWindow * parent); + +static gboolean view_onPopupMenu (GtkWidget *treeview, gpointer userdata); +static gboolean view_onButtonPressed (GtkWidget *treeview, GdkEventButton *event, gpointer userdata); +static void viewRowActivated( GtkTreeView *tree_view, GtkTreePath *path, GtkTreeViewColumn *column, gpointer user_data); + + +// theme files +static void load_theme(); +static void read_config(); +static void write_config(); +static void check_theme(); + + +// define menubar, toolbar and popup +static const char *global_ui = + "" + " " + " " + " " +// " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + " " + ""; + + +// define menubar and toolbar action +static GtkActionEntry entries[] = { + {"ThemeMenu", NULL, "Theme", NULL, NULL, NULL}, + {"ThemeAdd", GTK_STOCK_ADD, "_Add...", "N", "Add theme", G_CALLBACK (menuAdd)}, +// {"ThemeSaveAs", GTK_STOCK_SAVE_AS, "_Save as...", NULL, "Save theme as", G_CALLBACK (menuSaveAs)}, + {"ThemeDelete", GTK_STOCK_DELETE, "_Delete", NULL, "Delete theme", G_CALLBACK (menuDelete)}, + {"ThemeProperties", GTK_STOCK_PROPERTIES, "_Properties...", NULL, "Show properties", G_CALLBACK (menuProperties)}, + {"ThemeRename", NULL, "_Rename...", NULL, "Rename theme", G_CALLBACK (menuRename)}, + {"ThemeQuit", GTK_STOCK_QUIT, "_Quit", "Q", "Quit", G_CALLBACK (menuQuit)}, + {"ViewMenu", NULL, "View", NULL, NULL, NULL}, + {"ViewRefresh", GTK_STOCK_REFRESH, "Refresh", NULL, "Refresh", G_CALLBACK (menuRefresh)}, + {"ViewRefreshAll", GTK_STOCK_REFRESH, "Refresh all", NULL, "Refresh all", G_CALLBACK (menuRefreshAll)}, + {"ViewApply", GTK_STOCK_APPLY, "Apply", NULL, "Apply theme", G_CALLBACK (menuApply)}, + {"HelpMenu", NULL, "Help", NULL, NULL, NULL}, + {"HelpAbout", GTK_STOCK_ABOUT, "_About", "A", "About", G_CALLBACK (menuAbout)} +}; + + +int main (int argc, char ** argv) +{ + GtkWidget *vBox = NULL, *scrollbar = NULL; + GtkActionGroup *actionGroup; + + gtk_init (&argc, &argv); + g_thread_init( NULL ); + read_config(); + check_theme(); + g_width = 300; + g_height = 400; + + // define main layout : container, menubar, toolbar + g_window = gtk_window_new (GTK_WINDOW_TOPLEVEL); + gtk_window_set_title(GTK_WINDOW(g_window), _("Panel theming")); + gtk_window_resize(GTK_WINDOW(g_window), g_width, g_height); + g_signal_connect (G_OBJECT (g_window), "destroy", G_CALLBACK (menuQuit), NULL); + vBox = gtk_vbox_new (FALSE, 0); + gtk_container_add (GTK_CONTAINER(g_window), vBox); + + actionGroup = gtk_action_group_new ("menuActionGroup"); + gtk_action_group_add_actions (actionGroup, entries, G_N_ELEMENTS (entries), NULL); + globalUIManager = gtk_ui_manager_new(); + gtk_ui_manager_insert_action_group (globalUIManager, actionGroup, 0); + gtk_ui_manager_add_ui_from_string (globalUIManager, global_ui, -1, NULL ); + g_signal_connect(globalUIManager, "add_widget", G_CALLBACK (menuAddWidget), vBox); + gtk_ui_manager_ensure_update(globalUIManager); + scrollbar = gtk_scrolled_window_new(NULL, NULL); + gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scrollbar), GTK_POLICY_AUTOMATIC, GTK_POLICY_AUTOMATIC); + gtk_box_pack_start(GTK_BOX(vBox), scrollbar, TRUE, TRUE, 0); + + // define theme view + g_theme_view = create_view_and_model(); + gtk_container_add(GTK_CONTAINER(scrollbar), g_theme_view); + gtk_widget_show(g_theme_view); + g_signal_connect(g_theme_view, "button-press-event", (GCallback)view_onButtonPressed, NULL); + g_signal_connect(g_theme_view, "popup-menu", (GCallback)view_onPopupMenu, NULL); + g_signal_connect(g_theme_view, "row-activated", G_CALLBACK(viewRowActivated), NULL); + + // load themes + load_theme(g_theme_view); + + // rig up idle/thread routines + //Glib::Thread::create(sigc::mem_fun(window.view, &Thumbview::load_cache_images), true); + //Glib::Thread::create(sigc::mem_fun(window.view, &Thumbview::create_cache_images), true); + + gtk_widget_show_all(g_window); + gtk_main (); + return 0; +} + + +static void menuAddWidget (GtkUIManager * p_uiManager, GtkWidget * p_widget, GtkContainer * p_box) +{ + gtk_box_pack_start(GTK_BOX(p_box), p_widget, FALSE, FALSE, 0); + gtk_widget_show(p_widget); +} + + +static void menuAbout(GtkWindow * parent) +{ + const char *authors[] = { "Thierry Lorthiois ", "Andreas Fink ", "Christian Ruppert (Build system)", "Euan Freeman (tintwizard)\n See http://code.google.com/p/tintwizard/", NULL }; + + gtk_show_about_dialog( parent, "name", g_get_application_name( ), + "comments", _("Theming tool for tint2 panel"), + "version", VERSION_STRING, + "copyright", _("Copyright 2009 tint2 team\nTint2 License GNU GPL version 2\nTintwizard License GNU GPL version 3"), + "logo-icon-name", NULL, "authors", authors, + /* Translators: translate "translator-credits" as + your name to have it appear in the credits in the "About" + dialog */ + "translator-credits", _("translator-credits"), + NULL ); +} + + +static void menuAdd (GtkWindow *parent) +{ + GtkWidget *dialog; + GtkFileChooser *chooser; + GtkFileFilter *filter; + + dialog = gtk_file_chooser_dialog_new(_("Add a theme"), parent, GTK_FILE_CHOOSER_ACTION_OPEN, GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL, GTK_STOCK_ADD, GTK_RESPONSE_ACCEPT, NULL); + chooser = GTK_FILE_CHOOSER(dialog); + + gtk_file_chooser_set_current_folder(chooser, g_get_home_dir()); + gtk_file_chooser_set_select_multiple(chooser, TRUE); + + filter = gtk_file_filter_new(); + gtk_file_filter_set_name(filter, _("Tint2 theme files")); + gtk_file_filter_add_pattern(filter, "*.tint2rc"); + gtk_file_chooser_add_filter(chooser, filter); + + if (gtk_dialog_run (GTK_DIALOG(dialog)) == GTK_RESPONSE_ACCEPT) { + GSList *l, *list = gtk_file_chooser_get_filenames(chooser); + + gchar *file, *pt1, *name, *path; + for (l = list; l ; l = l->next) { + file = (char *)l->data; + pt1 = strrchr (file, '/'); + if (pt1) { + pt1++; + if (*pt1) { + name = strdup(pt1); + path = g_build_filename (g_get_user_config_dir(), "tint2", name, NULL); + copy_file(file, path); + g_free(path); + pt1 = strstr(name, ".tint2rc"); + if (pt1) { + file = strndup(name, pt1-name); + add_to_list(g_theme_view, file); + g_free(file); + } + g_free(name); + } + } + } + + g_slist_foreach(list, (GFunc)g_free, NULL); + g_slist_free(list); + } + gtk_widget_destroy (dialog); +} + +/* +static void menuSaveAs (GtkWindow *parent) +{ + GtkWidget *dialog; + GtkFileChooser *chooser; + + dialog = gtk_file_chooser_dialog_new (_("Save theme as"), parent, GTK_FILE_CHOOSER_ACTION_SAVE, GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL, GTK_STOCK_SAVE, GTK_RESPONSE_ACCEPT, NULL); + chooser = GTK_FILE_CHOOSER(dialog); + + gtk_file_chooser_set_do_overwrite_confirmation (chooser, TRUE); + gtk_file_chooser_set_current_folder (chooser, g_get_home_dir()); + gtk_file_chooser_set_current_name (chooser, _("Untitled document")); + + if (gtk_dialog_run (GTK_DIALOG(dialog)) == GTK_RESPONSE_ACCEPT) { + char *filename = gtk_file_chooser_get_filename(chooser); + printf("fichier %s\n", filename); + //save_to_file (filename); + g_free (filename); + } + gtk_widget_destroy (dialog); +} +*/ + +static void menuDelete (void) +{ + GtkTreeSelection *sel; + GtkTreeIter iter; + GtkTreeModel *model; + char *value, *name1, *name2; + + sel = gtk_tree_view_get_selection(GTK_TREE_VIEW(g_theme_view)); + if (gtk_tree_selection_get_selected(GTK_TREE_SELECTION(sel), &model, &iter)) { + gtk_tree_model_get(model, &iter, COL_TEXT, &value, -1); + gtk_tree_selection_unselect_all(sel); + // remove from the gui + gtk_list_store_remove(GTK_LIST_STORE(model), &iter); + + name1 = g_build_filename (g_get_user_config_dir(), "tint2", value, NULL); + name2 = g_strdup_printf("%s.tint2rc", name1); + g_remove(name2); + + g_free(name1); + g_free(name2); + g_free(value); + } +} + + +static void menuProperties (void) +{ + GtkTreeSelection *sel; + GtkTreeIter iter; + GtkTreeModel *model; + char *value, *name1, *name2, *cmd; + + sel = gtk_tree_view_get_selection(GTK_TREE_VIEW(g_theme_view)); + if (gtk_tree_selection_get_selected(GTK_TREE_SELECTION(sel), &model, &iter)) { + gtk_tree_model_get(model, &iter, COL_TEXT, &value, -1); + + name1 = g_build_filename ("\'", g_get_user_config_dir(), "tint2", value, NULL); + name2 = g_strdup_printf("%s.tint2rc\'", name1); + + cmd = g_strdup_printf("tintwizard.py %s", name2); + system(cmd); + g_free(cmd); + + g_free(name1); + g_free(name2); + g_free(value); + } +} + + +static void menuRename (void) +{ + printf("menuRename\n"); + // g_rename +} + + +static void menuQuit (void) +{ + write_config(); + + g_object_unref(g_store); + gtk_main_quit (); +} + + +static void menuRefresh (void) +{ + printf("menuRefresh\n"); +} + + +static void menuRefreshAll (void) +{ + printf("menuRefreshAll\n"); +} + + +static void menuApply (void) +{ + GtkTreeSelection *sel; + GtkTreeIter iter; + GtkTreeModel *model; + char *value, *name1, *name2; + + sel = gtk_tree_view_get_selection(GTK_TREE_VIEW(g_theme_view)); + if (gtk_tree_selection_get_selected(GTK_TREE_SELECTION(sel), &model, &iter)) { + gtk_tree_model_get(model, &iter, COL_TEXT, &value, -1); + name1 = g_build_filename (g_get_user_config_dir(), "tint2", value, NULL); + name2 = g_strdup_printf("%s.tint2rc", name1); + g_free(name1); + + copy_file(name2, g_path_config); + write_config(); + g_free(value); + g_free(name2); + + // restart panel + system("killall -SIGUSR1 tint2"); + } +} + + +static void view_popup_menu(GtkWidget *treeview, GdkEventButton *event, gpointer userdata) +{ + GtkWidget *w = gtk_ui_manager_get_widget(globalUIManager, "/ThemePopup"); + + gtk_menu_popup(GTK_MENU(w), NULL, NULL, NULL, NULL, (event != NULL) ? event->button : 0, gdk_event_get_time((GdkEvent*)event)); +} + + +static gboolean view_onButtonPressed (GtkWidget *treeview, GdkEventButton *event, gpointer userdata) +{ + // single click with the right mouse button? + if (event->type == GDK_BUTTON_PRESS && event->button == 3) { + GtkTreeSelection *selection; + + selection = gtk_tree_view_get_selection(GTK_TREE_VIEW(treeview)); + + if (gtk_tree_selection_count_selected_rows(selection) <= 1) { + GtkTreePath *path; + + // Get tree path for row that was clicked + if (gtk_tree_view_get_path_at_pos(GTK_TREE_VIEW(treeview), (gint) event->x, (gint) event->y, &path, NULL, NULL, NULL)) { + gtk_tree_selection_unselect_all(selection); + gtk_tree_selection_select_path(selection, path); + gtk_tree_path_free(path); + } + } + + view_popup_menu(treeview, event, userdata); + return TRUE; + } + return FALSE; +} + + +static gboolean view_onPopupMenu (GtkWidget *treeview, gpointer userdata) +{ + view_popup_menu(treeview, NULL, userdata); + return TRUE; +} + + +static void viewRowActivated(GtkTreeView *tree_view, GtkTreePath *path, GtkTreeViewColumn *column, gpointer user_data) +{ + menuApply(); +} + + +static void load_theme(GtkWidget *list) +{ + GDir *dir; + gchar *file, *pt1, *name; + + dir = g_dir_open(g_path_dir, 0, NULL); + while ((file = g_dir_read_name(dir))) { + pt1 = strstr(file, ".tint2rc"); + if (pt1) { + name = strndup(file, pt1-file); + add_to_list(list, name); + g_free(name); + } + } + g_dir_close(dir); + + // search default theme + GtkTreeIter iter; + GtkTreeModel *model; + if (g_default_theme) { + printf("defaultTheme %s\n", g_default_theme); + //gtk_tree_selection_select_iter(GtkTreeSelection *selection, GtkTreeIter *iter); + } +} + + +// theme file management +void read_config() +{ + char *path; + + if (g_default_theme) + g_free(g_default_theme); + + g_width = 600; + g_height = 350; + path = g_build_filename (g_get_user_config_dir(), "tint2", "tint2confrc", NULL); + if (g_file_test (path, G_FILE_TEST_EXISTS)) { + FILE *fp; + char line[80]; + char *key, *value; + if ((fp = fopen(path, "r")) != NULL) { + while (fgets(line, sizeof(line), fp) != NULL) { + if (parse_line(line, &key, &value)) { + if (strcmp (key, "default_theme") == 0) + g_default_theme = strdup (value); + else if (strcmp (key, "width") == 0) + g_width = atoi(value); + else if (strcmp (key, "height") == 0) + g_height = atoi(value); + free (key); + free (value); + } + } + fclose (fp); + } + } + g_free(path); +} + + +void write_config() +{ + char *path; + FILE *fp; + GtkRequisition req; + int x, y, width, height, depth; + int top, bottom, left, right; + GdkRectangle rect; + + gtk_window_get_size(GTK_WINDOW(g_window), &width, &height); + printf("write_config %d, %d\n", width, height); + + // GTK incapacity to return (width, height) of the window is really annoying + gdk_window_get_geometry(GTK_WIDGET(g_window)->window, &x, &y, &width, &height, &depth); + printf(" write_config %d, %d, %d, %d\n", x, y, width, height); + + //Window xid = GDK_WINDOW_XWINDOW(GTK_WIDGET(g_window)->window); + //gdk_window_get_frame_extentsGTK_WINDOW(g_window), &rect); + //printf(" write_config %d, %d\n", rec.width, rec.height); + +/* + path = gtk_tree_path_new_from_indices( playlist_pos, -1 ); + sel = gtk_tree_view_get_selection( (GtkTreeView*)list_view ); + gtk_tree_selection_select_path( sel, path ); + gtk_tree_path_free( path ); + */ + path = g_build_filename (g_get_user_config_dir(), "tint2", "tint2confrc", NULL); + fp = fopen(path, "w"); + if (fp != NULL) { + fputs("#---------------------------------------------\n", fp); + fputs("# TINT2CONF CONFIG FILE\n", fp); + fprintf(fp, "default_theme = %s\n", g_default_theme); + fprintf(fp, "width = %d\n", g_width); + fprintf(fp, "height = %d\n", g_height); + fputs("\n", fp); + fclose (fp); + } + g_free(path); +} + + +void check_theme() +{ + g_path_dir = g_build_filename (g_get_user_config_dir(), "tint2", NULL); + if (!g_file_test (g_path_dir, G_FILE_TEST_IS_DIR)) + g_mkdir(g_path_dir, 0777); + + g_path_config = g_build_filename (g_get_user_config_dir(), "tint2", "tint2rc", NULL); + +} + + + diff -Nru tint2-0.7.1/src/tint2conf/Makefile.am tint2-0.9/src/tint2conf/Makefile.am --- tint2-0.7.1/src/tint2conf/Makefile.am 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/tint2conf/Makefile.am 2010-01-15 20:09:35.000000000 +0000 @@ -0,0 +1,9 @@ +if ENABLE_TINT2CONF +bin_PROGRAMS = tint2conf +dist_bin_SCRIPTS = tintwizard.py +tint2conf_SOURCES = main.c theme_view.c theme_view.h ../util/common.c ../version.h +INCLUDES = -I../util + +AM_CFLAGS += @TINT2CONF_CFLAGS@ +LIBS += @TINT2CONF_LIBS@ +endif diff -Nru tint2-0.7.1/src/tint2conf/Makefile.in tint2-0.9/src/tint2conf/Makefile.in --- tint2-0.7.1/src/tint2conf/Makefile.in 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/tint2conf/Makefile.in 2010-01-28 11:16:45.000000000 +0000 @@ -0,0 +1,557 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +@ENABLE_TINT2CONF_TRUE@bin_PROGRAMS = tint2conf$(EXEEXT) +@ENABLE_TINT2CONF_TRUE@am__append_1 = @TINT2CONF_CFLAGS@ +@ENABLE_TINT2CONF_TRUE@am__append_2 = @TINT2CONF_LIBS@ +subdir = src/tint2conf +DIST_COMMON = $(am__dist_bin_SCRIPTS_DIST) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" +PROGRAMS = $(bin_PROGRAMS) +am__tint2conf_SOURCES_DIST = main.c theme_view.c theme_view.h \ + ../util/common.c ../version.h +@ENABLE_TINT2CONF_TRUE@am_tint2conf_OBJECTS = main.$(OBJEXT) \ +@ENABLE_TINT2CONF_TRUE@ theme_view.$(OBJEXT) common.$(OBJEXT) +tint2conf_OBJECTS = $(am_tint2conf_OBJECTS) +tint2conf_LDADD = $(LDADD) +am__dist_bin_SCRIPTS_DIST = tintwizard.py +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +SCRIPTS = $(dist_bin_SCRIPTS) +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +SOURCES = $(tint2conf_SOURCES) +DIST_SOURCES = $(am__tint2conf_SOURCES_DIST) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_CFLAGS = @AM_CFLAGS@ $(am__append_1) +AM_LDFLAGS = @AM_LDFLAGS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CAIRO_CFLAGS = @CAIRO_CFLAGS@ +CAIRO_LIBS = @CAIRO_LIBS@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DISTCLEANFILES = @DISTCLEANFILES@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GLIB2_CFLAGS = @GLIB2_CFLAGS@ +GLIB2_LIBS = @GLIB2_LIBS@ +GOBJECT2_CFLAGS = @GOBJECT2_CFLAGS@ +GOBJECT2_LIBS = @GOBJECT2_LIBS@ +GREP = @GREP@ +IMLIB2_CFLAGS = @IMLIB2_CFLAGS@ +IMLIB2_LIBS = @IMLIB2_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ $(am__append_2) +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PANGOCAIRO_CFLAGS = @PANGOCAIRO_CFLAGS@ +PANGOCAIRO_LIBS = @PANGOCAIRO_LIBS@ +PANGO_CFLAGS = @PANGO_CFLAGS@ +PANGO_LIBS = @PANGO_LIBS@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TINT2CONF_CFLAGS = @TINT2CONF_CFLAGS@ +TINT2CONF_LIBS = @TINT2CONF_LIBS@ +VERSION = @VERSION@ +X11_CFLAGS = @X11_CFLAGS@ +X11_LIBS = @X11_LIBS@ +XINERAMA_CFLAGS = @XINERAMA_CFLAGS@ +XINERAMA_LIBS = @XINERAMA_LIBS@ +XMKMF = @XMKMF@ +__PYTHON = @__PYTHON@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +@ENABLE_TINT2CONF_TRUE@dist_bin_SCRIPTS = tintwizard.py +@ENABLE_TINT2CONF_TRUE@tint2conf_SOURCES = main.c theme_view.c theme_view.h ../util/common.c ../version.h +@ENABLE_TINT2CONF_TRUE@INCLUDES = -I../util +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/tint2conf/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu src/tint2conf/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) +tint2conf$(EXEEXT): $(tint2conf_OBJECTS) $(tint2conf_DEPENDENCIES) + @rm -f tint2conf$(EXEEXT) + $(LINK) $(tint2conf_OBJECTS) $(tint2conf_LDADD) $(LIBS) +install-dist_binSCRIPTS: $(dist_bin_SCRIPTS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(dist_bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-dist_binSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(dist_bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/theme_view.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +common.o: ../util/common.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common.o -MD -MP -MF $(DEPDIR)/common.Tpo -c -o common.o `test -f '../util/common.c' || echo '$(srcdir)/'`../util/common.c +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/common.Tpo $(DEPDIR)/common.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../util/common.c' object='common.o' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common.o `test -f '../util/common.c' || echo '$(srcdir)/'`../util/common.c + +common.obj: ../util/common.c +@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common.obj -MD -MP -MF $(DEPDIR)/common.Tpo -c -o common.obj `if test -f '../util/common.c'; then $(CYGPATH_W) '../util/common.c'; else $(CYGPATH_W) '$(srcdir)/../util/common.c'; fi` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/common.Tpo $(DEPDIR)/common.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='../util/common.c' object='common.obj' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common.obj `if test -f '../util/common.c'; then $(CYGPATH_W) '../util/common.c'; else $(CYGPATH_W) '$(srcdir)/../util/common.c'; fi` + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) $(SCRIPTS) +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS install-dist_binSCRIPTS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-dist_binSCRIPTS + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic ctags distclean distclean-compile \ + distclean-generic distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-dist_binSCRIPTS \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ + ps ps-am tags uninstall uninstall-am uninstall-binPROGRAMS \ + uninstall-dist_binSCRIPTS + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff -Nru tint2-0.7.1/src/tint2conf/theme_view.c tint2-0.9/src/tint2conf/theme_view.c --- tint2-0.7.1/src/tint2conf/theme_view.c 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/tint2conf/theme_view.c 2010-01-09 16:43:14.000000000 +0000 @@ -0,0 +1,272 @@ +#include +#include "theme_view.h" + + +GtkListStore *g_store; + +// Some boring function declarations: GObject type system stuff +static void custom_cell_renderer_theme_init(CustomCellRendererTheme *cellprogress); +static void custom_cell_renderer_theme_class_init(CustomCellRendererThemeClass *klass); +static void custom_cell_renderer_theme_finalize(GObject *gobject); +static void custom_cell_renderer_theme_get_property(GObject *object, guint param_id, GValue *value, GParamSpec *pspec); +static void custom_cell_renderer_theme_set_property(GObject *object, guint param_id, const GValue *value, GParamSpec *pspec); + + +// These functions are the heart of our custom cell renderer: +static void custom_cell_renderer_theme_get_size(GtkCellRenderer *cell, GtkWidget *widget, GdkRectangle *cell_area, gint *x_offset, gint *y_offset, gint *width, gint *height); +static void custom_cell_renderer_theme_render(GtkCellRenderer *cell, GdkWindow *window, GtkWidget *widget, GdkRectangle *background_area, GdkRectangle *cell_area, GdkRectangle *expose_area, guint flags); + + +static gpointer parent_class; + +enum { PROP_TITLE = 1, }; + + + + +GtkWidget *create_view_and_model(void) +{ + GtkTreeViewColumn *col; + GtkCellRenderer *renderer; + GtkWidget *view; + GtkTreeSelection *sel; + GtkTreeIter iter; + + g_store = gtk_list_store_new(N_COLUMNS, G_TYPE_STRING); + view = gtk_tree_view_new_with_model(GTK_TREE_MODEL(g_store)); + gtk_tree_view_set_headers_visible(GTK_TREE_VIEW(view), FALSE); + + g_object_unref(g_store); // destroy store automatically with view +/* + renderer = gtk_cell_renderer_text_new(); + col = gtk_tree_view_column_new_with_attributes("Deb", renderer, "title", COL_TEXT, NULL); + gtk_tree_view_append_column(GTK_TREE_VIEW(view), col); +*/ + renderer = g_object_new(CUSTOM_TYPE_CELL_RENDERER_THEME, NULL); + col = gtk_tree_view_column_new(); + gtk_tree_view_column_pack_start (col, renderer, TRUE); + gtk_tree_view_column_add_attribute (col, renderer, "title", COL_TEXT); + gtk_tree_view_append_column(GTK_TREE_VIEW(view),col); + + sel = gtk_tree_view_get_selection(GTK_TREE_VIEW(view)); + gtk_tree_selection_set_mode(GTK_TREE_SELECTION(sel), GTK_SELECTION_SINGLE); + g_signal_connect(sel, "changed", G_CALLBACK(on_changed), NULL); + + return view; +} + + +void on_changed(GtkWidget *widget, gpointer label) +{ + GtkTreeIter iter; + GtkTreeModel *model; + char *value; + + if (gtk_tree_selection_get_selected(GTK_TREE_SELECTION(widget), &model, &iter)) { + gtk_tree_model_get(model, &iter, COL_TEXT, &value, -1); + //gtk_label_set_text(GTK_LABEL(label), value); + g_free(value); + } + +} + + +void add_to_list(GtkWidget *list, const gchar *str) +{ + GtkTreeIter iter; + + gtk_list_store_append(g_store, &iter); + gtk_list_store_set(g_store, &iter, COL_TEXT, str, -1); + //gtk_list_store_set (g_store, &iter, COL_TEXT, buf, -1); +} + + +/*************************************************************************** +* custom_cell_renderer_theme_get_type: here we register our type with +* the GObject type system if we +* haven't done so yet. Everything +* else is done in the callbacks. +***************************************************************************/ + +GType custom_cell_renderer_theme_get_type (void) +{ + static GType cell_type = 0; + + if (cell_type == 0) { + static const GTypeInfo cell_info = + { + sizeof (CustomCellRendererThemeClass), + NULL, // base_init + NULL, // base_finalize + (GClassInitFunc) custom_cell_renderer_theme_class_init, + NULL, // class_finalize + NULL, // class_data + sizeof (CustomCellRendererTheme), + 0, // n_preallocs + (GInstanceInitFunc) custom_cell_renderer_theme_init, + }; + + // Derive from GtkCellRenderer + cell_type = g_type_register_static(GTK_TYPE_CELL_RENDERER, "CustomCellRendererTheme", &cell_info, 0); + } + + return cell_type; +} + + +static void custom_cell_renderer_theme_init(CustomCellRendererTheme *celltheme) +{ + // set some default properties + GTK_CELL_RENDERER(celltheme)->mode = GTK_CELL_RENDERER_MODE_INERT; + GTK_CELL_RENDERER(celltheme)->xpad = 2; + GTK_CELL_RENDERER(celltheme)->ypad = 2; + celltheme->title = 0; + printf("custom_cell_renderer_theme_init\n\n"); + +} + + +/*************************************************************************** +* custom_cell_renderer_theme_class_init: +* +* set up our own get_property and set_property functions, and +* override the parent's functions that we need to implement. +* And make our new "percentage" property known to the type system. +* If you want cells that can be activated on their own (ie. not +* just the whole row selected) or cells that are editable, you +* will need to override 'activate' and 'start_editing' as well. +***************************************************************************/ + +static void custom_cell_renderer_theme_class_init(CustomCellRendererThemeClass *klass) +{ + GtkCellRendererClass *cell_class = GTK_CELL_RENDERER_CLASS(klass); + GObjectClass *object_class = G_OBJECT_CLASS(klass); + + parent_class = g_type_class_peek_parent (klass); + object_class->finalize = custom_cell_renderer_theme_finalize; + + object_class->get_property = custom_cell_renderer_theme_get_property; + object_class->set_property = custom_cell_renderer_theme_set_property; + + // Override the two crucial functions that are the heart of a cell renderer in the parent class + cell_class->get_size = custom_cell_renderer_theme_get_size; + cell_class->render = custom_cell_renderer_theme_render; + +printf("custom_class_init\n\n"); + + // Install our very own properties + g_object_class_install_property (object_class, PROP_TITLE, g_param_spec_string("title", "Title", "Theme's title", 0, G_PARAM_READWRITE)); +// g_object_class_install_property (object_class, PROP_PERCENTAGE, g_param_spec_double ("percentage", "Percentage", "The fractional progress to display", 0, 1, 0, G_PARAM_READWRITE)); +} + + +static void custom_cell_renderer_theme_finalize(GObject *object) +{ + CustomCellRendererTheme *celltheme = CUSTOM_CELL_RENDERER_THEME(object); + + // free any resources here + //if (celltheme->title) + //g_free(celltheme->title); + + // Free any dynamically allocated resources here + (* G_OBJECT_CLASS (parent_class)->finalize) (object); +} + + +static void custom_cell_renderer_theme_get_property(GObject *object, guint param_id, GValue *value, GParamSpec *psec) +{ + CustomCellRendererTheme *celltheme = CUSTOM_CELL_RENDERER_THEME(object); + + switch (param_id) { + case PROP_TITLE: + g_value_set_string(value, celltheme->title); + break; + + default: + G_OBJECT_WARN_INVALID_PROPERTY_ID (object, param_id, psec); + break; + } +} + + +static void custom_cell_renderer_theme_set_property(GObject *object, guint param_id, const GValue *value, GParamSpec *pspec) +{ + CustomCellRendererTheme *cellprogress = CUSTOM_CELL_RENDERER_THEME(object); + + switch (param_id) { + case PROP_TITLE: +//printf("set_property**************************************\n"); + cellprogress->title = g_value_get_string(value); + break; + + default: + G_OBJECT_WARN_INVALID_PROPERTY_ID(object, param_id, pspec); + break; + } +} + + +#define FIXED_WIDTH 100 +#define FIXED_HEIGHT 20 + +static void custom_cell_renderer_theme_get_size(GtkCellRenderer *cell, GtkWidget *widget, GdkRectangle *cell_area, gint *x_offset, gint *y_offset, gint *width, gint *height) +{ + gint calc_width; + gint calc_height; + + // calculate the size of our cell, taking into account + // padding and alignment properties of parent. + calc_width = (gint) cell->xpad * 2 + FIXED_WIDTH; + calc_height = (gint) cell->ypad * 2 + FIXED_HEIGHT; + + if (width) + *width = calc_width; + + if (height) + *height = calc_height; + + if (cell_area) { + if (x_offset) { + *x_offset = cell->xalign * (cell_area->width - calc_width); + *x_offset = MAX (*x_offset, 0); + } + + if (y_offset) { + *y_offset = cell->yalign * (cell_area->height - calc_height); + *y_offset = MAX (*y_offset, 0); + } + } +} + + +static void custom_cell_renderer_theme_render(GtkCellRenderer *cell, GdkWindow *window, GtkWidget *widget, GdkRectangle *background_area, GdkRectangle *cell_area, GdkRectangle *expose_area, guint flags) +{ + CustomCellRendererTheme *celltheme = CUSTOM_CELL_RENDERER_THEME(cell); + GtkStateType state; + gint width, height, x_offset, y_offset; + PangoLayout *layout; + + // do the rendering. + custom_cell_renderer_theme_get_size(cell, widget, cell_area, &x_offset, &y_offset, &width, &height); + + if (GTK_WIDGET_HAS_FOCUS (widget)) + state = GTK_STATE_ACTIVE; + else + state = GTK_STATE_NORMAL; + + width -= cell->xpad*2; + height -= cell->ypad*2; + + layout = gtk_widget_create_pango_layout(widget, ""); + pango_layout_set_text(layout, celltheme->title, strlen(celltheme->title)); + gtk_paint_layout (widget->style, widget->window, state, FALSE, NULL, widget, NULL, x_offset, y_offset, layout); + //pango_layout_get_size (layout, &width, &height); + g_object_unref (layout); + + //gtk_paint_layout + //gtk_paint_box (widget->style, window, GTK_STATE_NORMAL, GTK_SHADOW_IN, NULL, widget, "title", cell_area->x + x_offset + cell->xpad, cell_area->y + y_offset + cell->ypad, width - 1, height - 1); + +printf("custom_cell_renderer_theme_render\n"); + //gtk_paint_box (widget->style, window, state, GTK_SHADOW_OUT, NULL, widget, "bar", cell_area->x + x_offset + cell->xpad, cell_area->y + y_offset + cell->ypad, width * cellprogress->progress, height - 1); +} + diff -Nru tint2-0.7.1/src/tint2conf/theme_view.h tint2-0.9/src/tint2conf/theme_view.h --- tint2-0.7.1/src/tint2conf/theme_view.h 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/tint2conf/theme_view.h 2009-11-17 10:03:39.000000000 +0000 @@ -0,0 +1,48 @@ +#ifndef THEME_VIEW +#define THEME_VIEW + +#include + +// Some boilerplate GObject type check and type cast macros. +// 'klass' is used here instead of 'class', because 'class' is a c++ keyword + +#define CUSTOM_TYPE_CELL_RENDERER_THEME (custom_cell_renderer_theme_get_type()) +#define CUSTOM_CELL_RENDERER_THEME(obj) (G_TYPE_CHECK_INSTANCE_CAST((obj), CUSTOM_TYPE_CELL_RENDERER_THEME, CustomCellRendererTheme)) +#define CUSTOM_CELL_RENDERER_THEME_CLASS(klass) (G_TYPE_CHECK_CLASS_CAST ((klass), CUSTOM_TYPE_CELL_RENDERER_THEME, CustomCellRendererThemeClass)) +#define CUSTOM_IS_CELL_PROGRESS_THEME(obj) (G_TYPE_CHECK_INSTANCE_TYPE ((obj), CUSTOM_TYPE_CELL_RENDERER_THEME)) +#define CUSTOM_IS_CELL_PROGRESS_THEME_CLASS(klass) (G_TYPE_CHECK_CLASS_TYPE ((klass), CUSTOM_TYPE_CELL_RENDERER_THEME)) +#define CUSTOM_CELL_RENDERER_THEME_GET_CLASS(obj) (G_TYPE_INSTANCE_GET_CLASS ((obj), CUSTOM_TYPE_CELL_RENDERER_THEME, CustomCellRendererThemeClass)) + +extern GtkListStore *g_store; + +enum { COL_TEXT = 0, N_COLUMNS }; + +typedef struct _CustomCellRendererTheme CustomCellRendererTheme; +typedef struct _CustomCellRendererThemeClass CustomCellRendererThemeClass; + + +struct _CustomCellRendererTheme +{ + GtkCellRenderer parent; + + gchar *title; + gdouble progress; +}; + + +struct _CustomCellRendererThemeClass +{ + GtkCellRendererClass parent_class; +}; + + +GtkWidget *create_view_and_model(void); + +GType custom_cell_renderer_theme_get_type(void); + +void on_changed(GtkWidget *widget, gpointer label); + +void add_to_list(GtkWidget *list, const gchar *str); + +#endif + diff -Nru tint2-0.7.1/src/tint2conf/tintwizard.py tint2-0.9/src/tint2conf/tintwizard.py --- tint2-0.7.1/src/tint2conf/tintwizard.py 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/tint2conf/tintwizard.py 2009-11-05 19:48:26.000000000 +0000 @@ -0,0 +1,2387 @@ +#!/usr/bin/env python + +#************************************************************************** +# Tintwizard +# +# Copyright (C) 2009 Euan Freeman +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License version 3 +# as published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +#*************************************************************************/ +# Last modified: 27th September 2009 + +import pygtk +pygtk.require('2.0') +import gtk +import os +import sys +import signal +import webbrowser +import math +import shutil + +# Project information +NAME = "tintwizard" +AUTHORS = ["Euan Freeman "] +VERSION = "0.2.9" +COMMENTS = "tintwizard generates config files for the lightweight panel replacement tint2" +WEBSITE = "http://code.google.com/p/tintwizard/" + +# Default values for text entry fields +BG_ROUNDING = "0" +BG_BORDER = "0" +PANEL_SIZE_X = "0" +PANEL_SIZE_Y = "40" +PANEL_MARGIN_X = "0" +PANEL_MARGIN_Y = "0" +PANEL_PADDING_X = "0" +PANEL_PADDING_Y = "0" +PANEL_MONITOR = "all" +TASKBAR_PADDING_X = "0" +TASKBAR_PADDING_Y = "0" +TASKBAR_SPACING = "0" +TASK_BLINKS = "7" +TASK_MAXIMUM_SIZE_X = "200" +TASK_MAXIMUM_SIZE_Y = "32" +TASK_PADDING_X = "0" +TASK_PADDING_Y = "0" +TASK_SPACING = "0" +TRAY_PADDING_X = "0" +TRAY_PADDING_Y = "0" +TRAY_SPACING = "0" +ICON_ALPHA = "100" +ICON_SAT = "0" +ICON_BRI = "0" +ACTIVE_ICON_ALPHA = "100" +ACTIVE_ICON_SAT = "0" +ACTIVE_ICON_BRI = "0" +CLOCK_FMT_1 = "%H:%M" +CLOCK_FMT_2 = "%a %d %b" +CLOCK_PADDING_X = "0" +CLOCK_PADDING_Y = "0" +CLOCK_LCLICK = "" +CLOCK_RCLICK = "" +TOOLTIP_PADDING_X = "0" +TOOLTIP_PADDING_Y = "0" +TOOLTIP_SHOW_TIMEOUT = "0" +TOOLTIP_HIDE_TIMEOUT = "0" +BATTERY_LOW = "20" +BATTERY_ACTION = 'notify-send "battery low"' +BATTERY_PADDING_X = "0" +BATTERY_PADDING_Y = "0" + +class TintWizardPrefGUI(gtk.Window): + """The dialog window which lets the user change the default preferences.""" + def __init__(self, tw): + """Create and shows the window.""" + self.tw = tw + + # Create top-level window + gtk.Window.__init__(self, gtk.WINDOW_TOPLEVEL) + + self.set_title("Preferences") + self.connect("delete_event", self.quit) + + self.layout = gtk.Table(2, 2, False) + + self.table = gtk.Table(5, 2, False) + self.table.set_row_spacings(5) + self.table.set_col_spacings(5) + + temp = gtk.Label("Default Font") + temp.set_alignment(0, 0.5) + self.table.attach(temp, 0, 1, 0, 1) + self.font = gtk.FontButton(self.tw.defaults["font"]) + self.font.set_alignment(0, 0.5) + self.table.attach(self.font, 1, 2, 0, 1, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Default Background Color") + temp.set_alignment(0, 0.5) + self.table.attach(temp, 0, 1, 1, 2) + self.bgColor = gtk.ColorButton(gtk.gdk.color_parse(self.tw.defaults["bgColor"])) + self.bgColor.set_alignment(0, 0.5) + self.table.attach(self.bgColor, 1, 2, 1, 2, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Default Foreground Color") + temp.set_alignment(0, 0.5) + self.table.attach(temp, 0, 1, 2, 3) + self.fgColor = gtk.ColorButton(gtk.gdk.color_parse(self.tw.defaults["fgColor"])) + self.fgColor.set_alignment(0, 0.5) + self.table.attach(self.fgColor, 1, 2, 2, 3, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Default Border Color") + temp.set_alignment(0, 0.5) + self.table.attach(temp, 0, 1, 3, 4) + self.borderColor = gtk.ColorButton(gtk.gdk.color_parse(self.tw.defaults["borderColor"])) + self.borderColor.set_alignment(0, 0.5) + self.table.attach(self.borderColor, 1, 2, 3, 4, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Number of Background Styles") + temp.set_alignment(0, 0.5) + self.table.attach(temp, 0, 1, 4, 5) + self.bgCount = gtk.Entry(6) + self.bgCount.set_width_chars(8) + self.bgCount.set_text(str(self.tw.defaults["bgCount"])) + self.table.attach(self.bgCount, 1, 2, 4, 5, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Default directory") + temp.set_alignment(0, 0.5) + self.table.attach(temp, 0, 1, 5, 6) + self.dir = gtk.Button(self.tw.defaults["dir"]) + self.dir.connect("clicked", self.chooseFolder) + self.table.attach(self.dir, 1, 2, 5, 6, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + self.layout.attach(self.table, 0, 2, 0, 1, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND, xpadding=20, ypadding=5) + + temp = gtk.Button("Save", gtk.STOCK_SAVE) + temp.set_name("save") + temp.connect("clicked", self.save) + self.layout.attach(temp, 0, 1, 1, 2, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND, ypadding=20) + temp = gtk.Button("Cancel", gtk.STOCK_CANCEL) + temp.set_name("cancel") + temp.connect("clicked", self.quit) + self.layout.attach(temp, 1, 2, 1, 2, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND, ypadding=20) + + self.add(self.layout) + + self.show_all() + + def chooseFolder(self, widget=None, direction=None): + """Called every time the folder button is clicked. Shows a file chooser.""" + chooser = gtk.FileChooserDialog("Choose Default Folder", self, gtk.FILE_CHOOSER_ACTION_SELECT_FOLDER, (gtk.STOCK_CANCEL, gtk.RESPONSE_CANCEL, gtk.STOCK_OPEN, gtk.RESPONSE_OK)) + chooser.set_default_response(gtk.RESPONSE_OK) + + if self.tw.curDir != None: + chooser.set_current_folder(self.tw.curDir) + + chooser.show() + + response = chooser.run() + + if response == gtk.RESPONSE_OK: + self.dir.set_label(chooser.get_filename()) + else: + chooser.destroy() + return + + chooser.destroy() + + def quit(self, widget=None, event=None): + """Destroys the window.""" + self.destroy() + + def save(self, action=None): + """Called when the Save button is clicked.""" + if confirmDialog(self, "Overwrite configuration file?") == gtk.RESPONSE_YES: + self.tw.defaults["font"] = self.font.get_font_name() + self.tw.defaults["bgColor"] = rgbToHex(self.bgColor.get_color().red, self.bgColor.get_color().green, self.bgColor.get_color().blue) + self.tw.defaults["fgColor"] = rgbToHex(self.fgColor.get_color().red, self.fgColor.get_color().green, self.fgColor.get_color().blue) + self.tw.defaults["borderColor"] = rgbToHex(self.borderColor.get_color().red, self.borderColor.get_color().green, self.borderColor.get_color().blue) + + try: + self.tw.defaults["bgCount"] = int(self.bgCount.get_text()) + except: + errorDialog(self, "Invalid value for background count") + return + + self.tw.defaults["dir"] = self.dir.get_label() + self.curDir = self.tw.defaults["dir"] + + self.tw.writeConf() + + self.quit() + +class TintWizardGUI(gtk.Window): + """The main window for the application.""" + def __init__(self): + """Create and show the window.""" + self.filename = None + self.curDir = None + self.toSave = False + + if len(sys.argv) > 1: + self.filename = sys.argv[1] + self.oneConfigFile = True + else: + self.oneConfigFile = False + + # Read conf file and set default values + self.readConf() + + if self.defaults["bgColor"] in [None, "None"]: + self.defaults["bgColor"] = "#000000" + + if self.defaults["fgColor"] in [None, "None"]: + self.defaults["fgColor"] = "#ffffff" + + if self.defaults["borderColor"] in [None, "None"]: + self.defaults["borderColor"] = "#ffffff" + + if self.defaults["dir"] in [None, "None"]: + if os.path.exists(os.path.expandvars("${HOME}") + "/.config/tint2"): + self.curDir = os.path.expandvars("${HOME}") + "/.config/tint2" + else: + self.curDir = None + else: + self.curDir = os.path.expandvars(self.defaults["dir"]) + + if not os.path.exists(os.path.expandvars(self.curDir)): + if os.path.exists(os.path.expandvars("${HOME}") + "/.config/tint2"): + self.curDir = os.path.expandvars("${HOME}") + "/.config/tint2" + else: + self.curDir = None + + try: + self.defaults["bgCount"] = int(self.defaults["bgCount"]) + except: + self.defaults["bgCount"] = 2 + + # Get the full location of the tint2 binary + which = os.popen('which tint2') + + self.tint2Bin = which.readline().strip() + + which.close() + + if len(self.tint2Bin) == 0: + errorDialog(self, "tint2 could not be found. Are you sure it is installed?") + sys.exit(1) + + # Create top-level window + gtk.Window.__init__(self, gtk.WINDOW_TOPLEVEL) + + self.set_title("tintwizard") + + self.connect("delete_event", self.quit) + + # self.table is our main layout manager + self.table = gtk.Table(4, 1, False) + + # Create menus and toolbar items + ui = """ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + """ + + # Set up UI manager + self.uiManager = gtk.UIManager() + + accelGroup = self.uiManager.get_accel_group() + self.add_accel_group(accelGroup) + + self.ag = gtk.ActionGroup("File") + self.ag.add_actions([("File", None, "_File"), + ("New",gtk.STOCK_NEW, "_New", None, "Create a new config", self.new), + ("Open", gtk.STOCK_OPEN, "_Open", None, "Open an existing config", self.openFile), + ("Save", gtk.STOCK_SAVE, "_Save", None, "Save the current config", self.save), + ("Save As...", gtk.STOCK_SAVE_AS, "Save As", None, "Save the current config as...", self.saveAs), + ("SaveDefault", None, "Save As tint2 Default", None, "Save the current config as the tint2 default", self.saveAsDef), + ("OpenDefault", None, "Open tint2 Default", None, "Open the current tint2 default config", self.openDef), + ("Apply", gtk.STOCK_APPLY, "Apply Config", None, "Apply the current config to tint2", self.apply), + ("Quit", gtk.STOCK_QUIT, "_Quit", None, "Quit the program", self.quit), + ("Tools", None, "_Tools"), + ("Tint2", None, "Tint_2"), + ("HelpMenu", None, "_Help"), + ("FontChange",gtk.STOCK_SELECT_FONT, "Change All Fonts", None, "Change all fonts at once.", self.changeAllFonts), + ("Defaults",gtk.STOCK_PREFERENCES, "Change Defaults", None, "Change tintwizard defaults.", self.changeDefaults), + ("Help",gtk.STOCK_HELP, "_Help", None, "Get help with tintwizard", self.help), + ("Report Bug",None, "Report Bug", None, "Report a problem with tintwizard", self.reportBug), + ("About",gtk.STOCK_ABOUT, "_About Tint Wizard", None, "Find out more about Tint Wizard", self.about)]) + + + # Add main UI + self.uiManager.insert_action_group(self.ag) + self.uiManager.add_ui_from_string(ui) + + if not self.oneConfigFile: + # Attach menubar and toolbar to main window + self.table.attach(self.uiManager.get_widget("/MenuBar"), 0, 4, 0, 1) + self.table.attach(self.uiManager.get_widget("/ToolBar"), 0, 4, 1, 2) + + # Create notebook + self.notebook = gtk.Notebook() + self.notebook.set_tab_pos(gtk.POS_TOP) + + # Create notebook pages + # Background Options + self.tableBgs = gtk.Table(rows=1, columns=1, homogeneous=False) + self.tableBgs.set_row_spacings(5) + self.tableBgs.set_col_spacings(5) + + self.bgNotebook = gtk.Notebook() + self.bgNotebook.set_scrollable(True) + + self.tableBgs.attach(self.bgNotebook, 0, 2, 0, 1) + + self.bgs = [] + + # Add buttons for adding/deleting background styles + temp = gtk.Button("New Background", gtk.STOCK_NEW) + temp.set_name("addBg") + temp.connect("clicked", self.addBgClick) + self.tableBgs.attach(temp, 0, 1, 1, 2, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + temp = gtk.Button("Delete Background", gtk.STOCK_DELETE) + temp.set_name("delBg") + temp.connect("clicked", self.delBgClick) + self.tableBgs.attach(temp, 1, 2, 1, 2, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + # Panel Options + self.tablePanel = gtk.Table(rows=9, columns=3, homogeneous=False) + self.tablePanel.set_row_spacings(5) + self.tablePanel.set_col_spacings(5) + + temp = gtk.Label("Position") + temp.set_alignment(0, 0.5) + self.tablePanel.attach(temp, 0, 1, 0, 1, xpadding=10) + self.panelPosY = gtk.combo_box_new_text() + self.panelPosY.append_text("bottom") + self.panelPosY.append_text("top") + self.panelPosY.append_text("center") + self.panelPosY.set_active(0) + self.panelPosY.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelPosY, 2, 3, 0, 1, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + self.panelPosX = gtk.combo_box_new_text() + self.panelPosX.append_text("left") + self.panelPosX.append_text("right") + self.panelPosX.append_text("center") + self.panelPosX.set_active(0) + self.panelPosX.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelPosX, 1, 2, 0, 1, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Panel Orientation") + temp.set_alignment(0, 0.5) + self.tablePanel.attach(temp, 0, 1, 1, 2, xpadding=10) + self.panelOrientation = gtk.combo_box_new_text() + self.panelOrientation.append_text("horizontal") + self.panelOrientation.append_text("vertical") + self.panelOrientation.set_active(0) + self.panelOrientation.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelOrientation, 1, 2, 1, 2, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + self.panelSizeLabel = gtk.Label("Size (width, height)") + self.panelSizeLabel.set_alignment(0, 0.5) + self.tablePanel.attach(self.panelSizeLabel, 0, 1, 2, 3, xpadding=10) + self.panelSizeX = gtk.Entry(6) + self.panelSizeX.set_width_chars(8) + self.panelSizeX.set_text(PANEL_SIZE_X) + self.panelSizeX.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelSizeX, 1, 2, 2, 3, xoptions=gtk.EXPAND) + self.panelSizeY = gtk.Entry(6) + self.panelSizeY.set_width_chars(8) + self.panelSizeY.set_text(PANEL_SIZE_Y) + self.panelSizeY.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelSizeY, 2, 3, 2, 3, xoptions=gtk.EXPAND) + + temp = gtk.Label("Margin (x, y)") + temp.set_alignment(0, 0.5) + self.tablePanel.attach(temp, 0, 1, 3, 4, xpadding=10) + self.panelMarginX = gtk.Entry(6) + self.panelMarginX.set_width_chars(8) + self.panelMarginX.set_text(PANEL_MARGIN_X) + self.panelMarginX.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelMarginX, 1, 2, 3, 4, xoptions=gtk.EXPAND) + self.panelMarginY = gtk.Entry(6) + self.panelMarginY.set_width_chars(8) + self.panelMarginY.set_text(PANEL_MARGIN_Y) + self.panelMarginY.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelMarginY, 2, 3, 3, 4, xoptions=gtk.EXPAND) + + temp = gtk.Label("Padding (x, y)") + temp.set_alignment(0, 0.5) + self.tablePanel.attach(temp, 0, 1, 4, 5, xpadding=10) + self.panelPadX = gtk.Entry(6) + self.panelPadX.set_width_chars(8) + self.panelPadX.set_text(PANEL_PADDING_Y) + self.panelPadX.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelPadX, 1, 2, 4, 5, xoptions=gtk.EXPAND) + self.panelPadY = gtk.Entry(6) + self.panelPadY.set_width_chars(8) + self.panelPadY.set_text(PANEL_PADDING_Y) + self.panelPadY.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelPadY, 2, 3, 4, 5, xoptions=gtk.EXPAND) + + temp = gtk.Label("Panel Background ID") + temp.set_alignment(0, 0.5) + self.tablePanel.attach(temp, 0, 1, 5, 6, xpadding=10) + self.panelBg = gtk.combo_box_new_text() + self.panelBg.append_text("0 (fully transparent)") + for i in range(len(self.bgs)): + self.panelBg.append_text(str(i+1)) + self.panelBg.set_active(0) + self.panelBg.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelBg, 1, 2, 5, 6, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Window Manager Menu") + temp.set_alignment(0, 0.5) + self.tablePanel.attach(temp, 0, 1, 6, 7, xpadding=10) + self.panelMenu = gtk.CheckButton() + self.panelMenu.set_active(False) + self.panelMenu.connect("toggled", self.changeOccurred) + self.tablePanel.attach(self.panelMenu, 1, 2, 6, 7, xoptions=gtk.EXPAND) + + temp = gtk.Label("Place In Window Manager Dock") + temp.set_alignment(0, 0.5) + self.tablePanel.attach(temp, 0, 1, 7, 8, xpadding=10) + self.panelDock = gtk.CheckButton() + self.panelDock.set_active(False) + self.panelDock.connect("toggled", self.changeOccurred) + self.tablePanel.attach(self.panelDock, 1, 2, 7, 8, xoptions=gtk.EXPAND) + + temp = gtk.Label("Panel Monitor (all, 1, 2...)") + temp.set_alignment(0, 0.5) + self.tablePanel.attach(temp, 0, 1, 8, 9, xpadding=10) + self.panelMonitor = gtk.Entry(6) + self.panelMonitor.set_width_chars(8) + self.panelMonitor.set_text(PANEL_MONITOR) + self.panelMonitor.connect("changed", self.changeOccurred) + self.tablePanel.attach(self.panelMonitor, 1, 2, 8, 9, xoptions=gtk.EXPAND) + + # Taskbar + self.tableTaskbar = gtk.Table(rows=5, columns=3, homogeneous=False) + self.tableTaskbar.set_row_spacings(5) + self.tableTaskbar.set_col_spacings(5) + + temp = gtk.Label("Taskbar Mode") + temp.set_alignment(0, 0.5) + self.tableTaskbar.attach(temp, 0, 1, 0, 1, xpadding=10) + self.taskbarMode = gtk.combo_box_new_text() + self.taskbarMode.append_text("single_desktop") + self.taskbarMode.append_text("multi_desktop") + self.taskbarMode.set_active(0) + self.taskbarMode.connect("changed", self.changeOccurred) + self.tableTaskbar.attach(self.taskbarMode, 1, 2, 0, 1, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Padding (x, y)") + temp.set_alignment(0, 0.5) + self.tableTaskbar.attach(temp, 0, 1, 1, 2, xpadding=10) + self.taskbarPadX = gtk.Entry(6) + self.taskbarPadX.set_width_chars(8) + self.taskbarPadX.set_text(TASKBAR_PADDING_X) + self.taskbarPadX.connect("changed", self.changeOccurred) + self.tableTaskbar.attach(self.taskbarPadX, 1, 2, 1, 2, xoptions=gtk.EXPAND) + self.taskbarPadY = gtk.Entry(6) + self.taskbarPadY.set_width_chars(8) + self.taskbarPadY.set_text(TASKBAR_PADDING_Y) + self.taskbarPadY.connect("changed", self.changeOccurred) + self.tableTaskbar.attach(self.taskbarPadY, 2, 3, 1, 2, xoptions=gtk.EXPAND) + + temp = gtk.Label("Horizontal Spacing") + temp.set_alignment(0, 0.5) + self.tableTaskbar.attach(temp, 0, 1, 3, 4, xpadding=10) + self.panelSpacing = gtk.Entry(6) + self.panelSpacing.set_width_chars(8) + self.panelSpacing.set_text(TASKBAR_SPACING) + self.panelSpacing.connect("changed", self.changeOccurred) + self.tableTaskbar.attach(self.panelSpacing, 1, 2, 3, 4, xoptions=gtk.EXPAND) + + temp = gtk.Label("Taskbar Background ID") + temp.set_alignment(0, 0.5) + self.tableTaskbar.attach(temp, 0, 1, 4, 5, xpadding=10) + self.taskbarBg = gtk.combo_box_new_text() + self.taskbarBg.append_text("0 (fully transparent)") + for i in range(len(self.bgs)): + self.taskbarBg.append_text(str(i+1)) + self.taskbarBg.set_active(0) + self.taskbarBg.connect("changed", self.changeOccurred) + self.tableTaskbar.attach(self.taskbarBg, 1, 2, 4, 5, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Active Taskbar Background ID") + temp.set_alignment(0, 0.5) + self.tableTaskbar.attach(temp, 0, 1, 5, 6, xpadding=10) + self.taskbarActiveBg = gtk.combo_box_new_text() + self.taskbarActiveBg.append_text("0 (fully transparent)") + for i in range(len(self.bgs)): + self.taskbarActiveBg.append_text(str(i+1)) + self.taskbarActiveBg.set_active(0) + self.taskbarActiveBg.connect("changed", self.changeOccurred) + self.tableTaskbar.attach(self.taskbarActiveBg, 1, 2, 5, 6, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + self.taskbarActiveBgEnable = gtk.CheckButton("Enable") + self.taskbarActiveBgEnable.set_active(False) + self.taskbarActiveBgEnable.connect("toggled", self.changeOccurred) + self.tableTaskbar.attach(self.taskbarActiveBgEnable, 2, 3, 5, 6, xoptions=gtk.EXPAND) + + # Task Options + self.tableTask = gtk.Table(rows=12, columns=3, homogeneous=False) + self.tableTask.set_row_spacings(5) + self.tableTask.set_col_spacings(5) + + temp = gtk.Label("Number of 'Blinks' on Urgent Event") + temp.set_alignment(0, 0.5) + self.tableTask.attach(temp, 0, 1, 0, 1, xpadding=10) + self.taskBlinks = gtk.Entry(6) + self.taskBlinks.set_width_chars(8) + self.taskBlinks.set_text(TASK_BLINKS) + self.taskBlinks.connect("changed", self.changeOccurred) + self.tableTask.attach(self.taskBlinks, 1, 2, 0, 1, xoptions=gtk.EXPAND) + + temp = gtk.Label("Show Text") + temp.set_alignment(0, 0.5) + self.tableTask.attach(temp, 0, 1, 1, 2, xpadding=10) + self.taskTextCheckButton = gtk.CheckButton() + self.taskTextCheckButton.set_active(True) + self.taskTextCheckButton.connect("toggled", self.changeOccurred) + self.tableTask.attach(self.taskTextCheckButton, 1, 2, 1, 2, xoptions=gtk.EXPAND) + + temp = gtk.Label("Centre Text") + temp.set_alignment(0, 0.5) + self.tableTask.attach(temp, 0, 1, 2, 3, xpadding=10) + self.taskCentreCheckButton = gtk.CheckButton() + self.taskCentreCheckButton.set_active(True) + self.taskCentreCheckButton.connect("toggled", self.changeOccurred) + self.tableTask.attach(self.taskCentreCheckButton, 1, 2, 2, 3, xoptions=gtk.EXPAND) + + temp = gtk.Label("Maximum Size (x, y)") + temp.set_alignment(0, 0.5) + self.tableTask.attach(temp, 0, 1, 3, 4, xpadding=10) + self.taskMaxSizeX = gtk.Entry(6) + self.taskMaxSizeX.set_width_chars(8) + self.taskMaxSizeX.set_text(TASK_MAXIMUM_SIZE_X) + self.taskMaxSizeX.connect("changed", self.changeOccurred) + self.tableTask.attach(self.taskMaxSizeX, 1, 2, 3, 4, xoptions=gtk.EXPAND) + self.taskMaxSizeY = gtk.Entry(6) + self.taskMaxSizeY.set_width_chars(8) + self.taskMaxSizeY.set_text(TASK_MAXIMUM_SIZE_Y) + self.taskMaxSizeY.connect("changed", self.changeOccurred) + self.tableTask.attach(self.taskMaxSizeY, 2, 3, 3, 4, xoptions=gtk.EXPAND) + + temp = gtk.Label("Padding (x, y)") + temp.set_alignment(0, 0.5) + self.tableTask.attach(temp, 0, 1, 4, 5, xpadding=10) + self.taskPadX = gtk.Entry(6) + self.taskPadX.set_width_chars(8) + self.taskPadX.set_text(TASK_PADDING_X) + self.taskPadX.connect("changed", self.changeOccurred) + self.tableTask.attach(self.taskPadX, 1, 2, 4, 5, xoptions=gtk.EXPAND) + self.taskPadY = gtk.Entry(6) + self.taskPadY.set_width_chars(8) + self.taskPadY.set_text(TASK_PADDING_Y) + self.taskPadY.connect("changed", self.changeOccurred) + self.tableTask.attach(self.taskPadY, 2, 3, 4, 5, xoptions=gtk.EXPAND) + + temp = gtk.Label("Horizontal Spacing") + temp.set_alignment(0, 0.5) + self.tableTask.attach(temp, 0, 1, 5, 6, xpadding=10) + self.taskbarSpacing = gtk.Entry(6) + self.taskbarSpacing.set_width_chars(8) + self.taskbarSpacing.set_text(TASK_SPACING) + self.taskbarSpacing.connect("changed", self.changeOccurred) + self.tableTask.attach(self.taskbarSpacing, 1, 2, 5, 6, xoptions=gtk.EXPAND) + + temp = gtk.Label("Task Background ID") + temp.set_alignment(0, 0.5) + self.tableTask.attach(temp, 0, 1, 6, 7, xpadding=10) + self.taskBg = gtk.combo_box_new_text() + self.taskBg.append_text("0 (fully transparent)") + for i in range(len(self.bgs)): + self.taskBg.append_text(str(i+1)) + self.taskBg.set_active(0) + self.taskBg.connect("changed", self.changeOccurred) + self.tableTask.attach(self.taskBg, 1, 2, 6, 7, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Task Active Background ID") + temp.set_alignment(0, 0.5) + self.tableTask.attach(temp, 0, 1, 7, 8, xpadding=10) + self.taskActiveBg = gtk.combo_box_new_text() + self.taskActiveBg.append_text("0 (fully transparent)") + for i in range(len(self.bgs)): + self.taskActiveBg.append_text(str(i+1)) + self.taskActiveBg.set_active(0) + self.taskActiveBg.connect("changed", self.changeOccurred) + self.tableTask.attach(self.taskActiveBg, 1, 2, 7, 8, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + # Icon Options + self.tableIcon = gtk.Table(rows=7, columns=3, homogeneous=False) + self.tableIcon.set_row_spacings(5) + self.tableIcon.set_col_spacings(5) + + temp = gtk.Label("Show Icons") + temp.set_alignment(0, 0.5) + self.tableIcon.attach(temp, 0, 1, 0, 1, xpadding=10) + self.taskIconCheckButton = gtk.CheckButton() + self.taskIconCheckButton.set_active(True) + self.taskIconCheckButton.connect("toggled", self.changeOccurred) + self.tableIcon.attach(self.taskIconCheckButton, 1, 2, 0, 1, xoptions=gtk.EXPAND) + + temp = gtk.Label("Note: Default values of 0 for each of these settings leaves icons unchanged!") + temp.set_alignment(0, 0.5) + self.tableIcon.attach(temp, 0, 1, 1, 2, xpadding=10) + + temp = gtk.Label("Icon Alpha (0 to 100)") + temp.set_alignment(0, 0.5) + self.tableIcon.attach(temp, 0, 1, 2, 3, xpadding=10) + self.iconHue = gtk.Entry(6) + self.iconHue.set_width_chars(8) + self.iconHue.set_text(ICON_ALPHA) + self.iconHue.connect("changed", self.changeOccurred) + self.tableIcon.attach(self.iconHue, 1, 2, 2, 3, xoptions=gtk.EXPAND) + + temp = gtk.Label("Icon Saturation (-100 to 100)") + temp.set_alignment(0, 0.5) + self.tableIcon.attach(temp, 0, 1, 3, 4, xpadding=10) + self.iconSat = gtk.Entry(6) + self.iconSat.set_width_chars(8) + self.iconSat.set_text(ICON_SAT) + self.iconSat.connect("changed", self.changeOccurred) + self.tableIcon.attach(self.iconSat, 1, 2, 3, 4, xoptions=gtk.EXPAND) + + temp = gtk.Label("Icon Brightness (-100 to 100)") + temp.set_alignment(0, 0.5) + self.tableIcon.attach(temp, 0, 1, 4, 5, xpadding=10) + self.iconBri = gtk.Entry(6) + self.iconBri.set_width_chars(8) + self.iconBri.set_text(ICON_BRI) + self.iconBri.connect("changed", self.changeOccurred) + self.tableIcon.attach(self.iconBri, 1, 2, 4, 5, xoptions=gtk.EXPAND) + + temp = gtk.Label("Active Icon Alpha (0 to 100)") + temp.set_alignment(0, 0.5) + self.tableIcon.attach(temp, 0, 1, 5, 6, xpadding=10) + self.activeIconHue = gtk.Entry(6) + self.activeIconHue.set_width_chars(8) + self.activeIconHue.set_text(ACTIVE_ICON_ALPHA) + self.activeIconHue.connect("changed", self.changeOccurred) + self.tableIcon.attach(self.activeIconHue, 1, 2, 5, 6, xoptions=gtk.EXPAND) + + temp = gtk.Label("Active Icon Saturation (-100 to 100)") + temp.set_alignment(0, 0.5) + self.tableIcon.attach(temp, 0, 1, 6, 7, xpadding=10) + self.activeIconSat = gtk.Entry(6) + self.activeIconSat.set_width_chars(8) + self.activeIconSat.set_text(ACTIVE_ICON_SAT) + self.activeIconSat.connect("changed", self.changeOccurred) + self.tableIcon.attach(self.activeIconSat, 1, 2, 6, 7, xoptions=gtk.EXPAND) + + temp = gtk.Label("Active Icon Brightness (-100 to 100)") + temp.set_alignment(0, 0.5) + self.tableIcon.attach(temp, 0, 1, 7, 8, xpadding=10) + self.activeIconBri = gtk.Entry(6) + self.activeIconBri.set_width_chars(8) + self.activeIconBri.set_text(ACTIVE_ICON_BRI) + self.activeIconBri.connect("changed", self.changeOccurred) + self.tableIcon.attach(self.activeIconBri, 1, 2, 7, 8, xoptions=gtk.EXPAND) + + # Font Options + self.tableFont = gtk.Table(rows=3, columns=3, homogeneous=False) + self.tableFont.set_row_spacings(5) + self.tableFont.set_col_spacings(5) + + temp = gtk.Label("Font") + temp.set_alignment(0, 0.5) + self.tableFont.attach(temp, 0, 1, 0, 1, xpadding=10) + self.fontButton = gtk.FontButton() + + if self.defaults["font"] in [None, "None"]: # If there was no font specified in the config file + self.defaults["font"] = self.fontButton.get_font_name() # Use the gtk default + + self.fontButton.set_font_name(self.defaults["font"]) + self.fontButton.connect("font-set", self.changeOccurred) + self.tableFont.attach(self.fontButton, 1, 2, 0, 1, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Font Color") + temp.set_alignment(0, 0.5) + self.tableFont.attach(temp, 0, 1, 1, 2, xpadding=10) + self.fontCol = gtk.Entry(7) + self.fontCol.set_width_chars(9) + self.fontCol.set_name("fontCol") + self.fontCol.connect("activate", self.colorTyped) + self.tableFont.attach(self.fontCol, 1, 2, 1, 2, xoptions=gtk.EXPAND) + self.fontColButton = gtk.ColorButton(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.fontColButton.set_use_alpha(True) + self.fontColButton.set_name("fontCol") + self.fontColButton.connect("color-set", self.colorChange) + self.tableFont.attach(self.fontColButton, 2, 3, 1, 2, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + self.fontCol.set_text(self.defaults["fgColor"]) + # Add this AFTER we set color to avoid "changed" event + self.fontCol.connect("changed", self.changeOccurred) + + temp = gtk.Label("Active Font Color") + temp.set_alignment(0, 0.5) + self.tableFont.attach(temp, 0, 1, 2, 3, xpadding=10) + self.fontActiveCol = gtk.Entry(7) + self.fontActiveCol.set_width_chars(9) + self.fontActiveCol.set_name("fontActiveCol") + self.fontActiveCol.connect("activate", self.colorTyped) + self.tableFont.attach(self.fontActiveCol, 1, 2, 2, 3, xoptions=gtk.EXPAND) + self.fontActiveColButton = gtk.ColorButton(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.fontActiveColButton.set_use_alpha(True) + self.fontActiveColButton.set_name("fontActiveCol") + self.fontActiveColButton.connect("color-set", self.colorChange) + self.tableFont.attach(self.fontActiveColButton, 2, 3, 2, 3, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + self.fontActiveCol.set_text(self.defaults["fgColor"]) + # Add this AFTER we set color to avoid "changed" event + self.fontActiveCol.connect("changed", self.changeOccurred) + + temp = gtk.Label("Font Shadow") + temp.set_alignment(0, 0.5) + self.tableFont.attach(temp, 0, 1, 3, 4, xpadding=10) + self.fontShadowCheckButton = gtk.CheckButton() + self.fontShadowCheckButton.set_active(False) + self.fontShadowCheckButton.connect("toggled", self.changeOccurred) + self.tableFont.attach(self.fontShadowCheckButton, 1, 2, 3, 4, xoptions=gtk.EXPAND) + + # Systray Options + self.tableTray = gtk.Table(rows=3, columns=3, homogeneous=False) + self.tableTray.set_row_spacings(5) + self.tableTray.set_col_spacings(5) + + temp = gtk.Label("Show Systray") + temp.set_alignment(0, 0.5) + self.tableTray.attach(temp, 0, 1, 0, 1, xpadding=10) + self.trayShow = gtk.CheckButton() + self.trayShow.set_active(True) + self.trayShow.connect("toggled", self.changeOccurred) + self.tableTray.attach(self.trayShow, 1, 2, 0, 1, xoptions=gtk.EXPAND) + + temp = gtk.Label("Padding (x, y)") + temp.set_alignment(0, 0.5) + self.tableTray.attach(temp, 0, 1, 1, 2, xpadding=10) + self.trayPadX = gtk.Entry(6) + self.trayPadX.set_width_chars(8) + self.trayPadX.set_text(TRAY_PADDING_X) + self.trayPadX.connect("changed", self.changeOccurred) + self.tableTray.attach(self.trayPadX, 1, 2, 1, 2, xoptions=gtk.EXPAND) + self.trayPadY = gtk.Entry(6) + self.trayPadY.set_width_chars(8) + self.trayPadY.set_text(TRAY_PADDING_Y) + self.trayPadY.connect("changed", self.changeOccurred) + self.tableTray.attach(self.trayPadY, 2, 3, 1, 2, xoptions=gtk.EXPAND) + + temp = gtk.Label("Horizontal Spacing") + temp.set_alignment(0, 0.5) + self.tableTray.attach(temp, 0, 1, 2, 3, xpadding=10) + self.traySpacing = gtk.Entry(6) + self.traySpacing.set_width_chars(8) + self.traySpacing.set_text(TRAY_SPACING) + self.traySpacing.connect("changed", self.changeOccurred) + self.tableTray.attach(self.traySpacing, 1, 2, 2, 3, xoptions=gtk.EXPAND) + + temp = gtk.Label("Icon Ordering") + temp.set_alignment(0, 0.5) + self.tableTray.attach(temp, 0, 1, 3, 4, xpadding=10) + self.trayOrder = gtk.combo_box_new_text() + self.trayOrder.append_text("ascending") + self.trayOrder.append_text("descending") + self.trayOrder.append_text("left2right") + self.trayOrder.append_text("right2left") + self.trayOrder.set_active(0) + self.trayOrder.connect("changed", self.changeOccurred) + self.tableTray.attach(self.trayOrder, 1, 2, 3, 4, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Systray Background ID") + temp.set_alignment(0, 0.5) + self.tableTray.attach(temp, 0, 1, 4, 5, xpadding=10) + self.trayBg = gtk.combo_box_new_text() + self.trayBg.append_text("0 (fully transparent)") + for i in range(len(self.bgs)): + self.trayBg.append_text(str(i+1)) + self.trayBg.set_active(0) + self.trayBg.connect("changed", self.changeOccurred) + self.tableTray.attach(self.trayBg, 1, 2, 4, 5, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + # Clock Options + self.tableClockDisplays = gtk.Table(rows=3, columns=3, homogeneous=False) + self.tableClockDisplays.set_row_spacings(5) + self.tableClockDisplays.set_col_spacings(5) + + temp = gtk.Label("Show Clock") + temp.set_alignment(0, 0.5) + self.tableClockDisplays.attach(temp, 0, 1, 0, 1, xpadding=10) + self.clockCheckButton = gtk.CheckButton() + self.clockCheckButton.set_active(True) + self.clockCheckButton.connect("toggled", self.changeOccurred) + self.tableClockDisplays.attach(self.clockCheckButton, 1, 2, 0, 1, xoptions=gtk.EXPAND) + + temp = gtk.Label("Time 1 Format") + temp.set_alignment(0, 0.5) + self.tableClockDisplays.attach(temp, 0, 1, 1, 2, xpadding=10) + self.clock1Format = gtk.Entry(50) + self.clock1Format.set_width_chars(20) + self.clock1Format.set_text(CLOCK_FMT_1) + self.clock1Format.connect("changed", self.changeOccurred) + self.tableClockDisplays.attach(self.clock1Format, 1, 2, 1, 2, xoptions=gtk.EXPAND) + self.clock1CheckButton = gtk.CheckButton("Show") + self.clock1CheckButton.set_active(True) + self.clock1CheckButton.connect("toggled", self.changeOccurred) + self.tableClockDisplays.attach(self.clock1CheckButton, 2, 3, 1, 2, xoptions=gtk.EXPAND) + + temp = gtk.Label("Time 1 Font") + temp.set_alignment(0, 0.5) + self.tableClockDisplays.attach(temp, 0, 1, 2, 3, xpadding=10) + self.clock1FontButton = gtk.FontButton() + self.clock1FontButton.set_font_name(self.defaults["font"]) + self.clock1FontButton.connect("font-set", self.changeOccurred) + self.tableClockDisplays.attach(self.clock1FontButton, 1, 2, 2, 3, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Time 2 Format") + temp.set_alignment(0, 0.5) + self.tableClockDisplays.attach(temp, 0, 1, 3, 4, xpadding=10) + self.clock2Format = gtk.Entry(50) + self.clock2Format.set_width_chars(20) + self.clock2Format.set_text(CLOCK_FMT_2) + self.clock2Format.connect("changed", self.changeOccurred) + self.tableClockDisplays.attach(self.clock2Format, 1, 2, 3, 4, xoptions=gtk.EXPAND) + self.clock2CheckButton = gtk.CheckButton("Show") + self.clock2CheckButton.set_active(True) + self.clock2CheckButton.connect("toggled", self.changeOccurred) + self.tableClockDisplays.attach(self.clock2CheckButton, 2, 3, 3, 4, xoptions=gtk.EXPAND) + + temp = gtk.Label("Time 2 Font") + temp.set_alignment(0, 0.5) + self.tableClockDisplays.attach(temp, 0, 1, 4, 5, xpadding=10) + self.clock2FontButton = gtk.FontButton() + self.clock2FontButton.set_font_name(self.defaults["font"]) + self.clock2FontButton.connect("font-set", self.changeOccurred) + self.tableClockDisplays.attach(self.clock2FontButton, 1, 2, 4, 5, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + self.clockArea = gtk.ScrolledWindow() + self.clockBuf = gtk.TextBuffer() + self.clockTextView = gtk.TextView(self.clockBuf) + self.clockBuf.insert_at_cursor("%H 00-23 (24-hour) %I 01-12 (12-hour) %l 1-12 (12-hour) %M 00-59 (minutes)\n%S 00-59 (seconds) %P am/pm %b Jan-Dec %B January-December\n%a Sun-Sat %A Sunday-Saturday %d 01-31 (day) %e 1-31 (day)\n%y 2 digit year, e.g. 09 %Y 4 digit year, e.g. 2009") + self.clockTextView.set_editable(False) + self.clockArea.add_with_viewport(self.clockTextView) + self.tableClockDisplays.attach(self.clockArea, 0, 3, 5, 6, xpadding=10) + + self.tableClockSettings = gtk.Table(rows=3, columns=3, homogeneous=False) + self.tableClockSettings.set_row_spacings(5) + self.tableClockSettings.set_col_spacings(5) + + temp = gtk.Label("Clock Font Color") + temp.set_alignment(0, 0.5) + self.tableClockSettings.attach(temp, 0, 1, 0, 1, xpadding=10) + self.clockFontCol = gtk.Entry(7) + self.clockFontCol.set_width_chars(9) + self.clockFontCol.set_name("clockFontCol") + self.clockFontCol.connect("activate", self.colorTyped) + self.tableClockSettings.attach(self.clockFontCol, 1, 2, 0, 1, xoptions=gtk.EXPAND) + self.clockFontColButton = gtk.ColorButton(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.clockFontColButton.set_use_alpha(True) + self.clockFontColButton.set_name("clockFontCol") + self.clockFontColButton.connect("color-set", self.colorChange) + self.tableClockSettings.attach(self.clockFontColButton, 2, 3, 0, 1, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + self.clockFontCol.set_text(self.defaults["fgColor"]) + # Add this AFTER we set color to avoid "changed" event + self.clockFontCol.connect("changed", self.changeOccurred) + + temp = gtk.Label("Padding (x, y)") + temp.set_alignment(0, 0.5) + self.tableClockSettings.attach(temp, 0, 1, 1, 2, xpadding=10) + self.clockPadX = gtk.Entry(6) + self.clockPadX.set_width_chars(8) + self.clockPadX.set_text(CLOCK_PADDING_X) + self.clockPadX.connect("changed", self.changeOccurred) + self.tableClockSettings.attach(self.clockPadX, 1, 2, 1, 2, xoptions=gtk.EXPAND) + self.clockPadY = gtk.Entry(6) + self.clockPadY.set_width_chars(8) + self.clockPadY.set_text(CLOCK_PADDING_Y) + self.clockPadY.connect("changed", self.changeOccurred) + self.tableClockSettings.attach(self.clockPadY, 2, 3, 1, 2, xoptions=gtk.EXPAND) + + temp = gtk.Label("Clock Background ID") + temp.set_alignment(0, 0.5) + self.tableClockSettings.attach(temp, 0, 1, 2, 3, xpadding=10) + self.clockBg = gtk.combo_box_new_text() + self.clockBg.append_text("0 (fully transparent)") + for i in range(len(self.bgs)): + self.clockBg.append_text(str(i+1)) + self.clockBg.set_active(0) + self.clockBg.connect("changed", self.changeOccurred) + self.tableClockSettings.attach(self.clockBg, 1, 2, 2, 3, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Left Click Command") + temp.set_alignment(0, 0.5) + self.tableClockSettings.attach(temp, 0, 1, 3, 4, xpadding=10) + self.clockLClick = gtk.Entry(50) + self.clockLClick.set_width_chars(20) + self.clockLClick.set_text(CLOCK_LCLICK) + self.clockLClick.connect("changed", self.changeOccurred) + self.tableClockSettings.attach(self.clockLClick, 1, 2, 3, 4, xoptions=gtk.EXPAND) + + temp = gtk.Label("Right Click Command") + temp.set_alignment(0, 0.5) + self.tableClockSettings.attach(temp, 0, 1, 4, 5, xpadding=10) + self.clockRClick = gtk.Entry(50) + self.clockRClick.set_width_chars(20) + self.clockRClick.set_text(CLOCK_RCLICK) + self.clockRClick.connect("changed", self.changeOccurred) + self.tableClockSettings.attach(self.clockRClick, 1, 2, 4, 5, xoptions=gtk.EXPAND) + + # Tooltip Options + self.tableTooltip = gtk.Table(rows=7, columns=3, homogeneous=False) + self.tableTooltip.set_row_spacings(5) + self.tableTooltip.set_col_spacings(5) + + temp = gtk.Label("Show Tooltips") + temp.set_alignment(0, 0.5) + self.tableTooltip.attach(temp, 0, 1, 0, 1, xpadding=10) + self.tooltipShow = gtk.CheckButton() + self.tooltipShow.set_active(False) + self.tooltipShow.connect("toggled", self.changeOccurred) + self.tableTooltip.attach(self.tooltipShow, 1, 2, 0, 1, xoptions=gtk.EXPAND) + + temp = gtk.Label("Padding (x, y)") + temp.set_alignment(0, 0.5) + self.tableTooltip.attach(temp, 0, 1, 1, 2, xpadding=10) + self.tooltipPadX = gtk.Entry(6) + self.tooltipPadX.set_width_chars(8) + self.tooltipPadX.set_text(TOOLTIP_PADDING_X) + self.tooltipPadX.connect("changed", self.changeOccurred) + self.tableTooltip.attach(self.tooltipPadX, 1, 2, 1, 2, xoptions=gtk.EXPAND) + self.tooltipPadY = gtk.Entry(6) + self.tooltipPadY.set_width_chars(8) + self.tooltipPadY.set_text(TOOLTIP_PADDING_Y) + self.tooltipPadY.connect("changed", self.changeOccurred) + self.tableTooltip.attach(self.tooltipPadY, 2, 3, 1, 2, xoptions=gtk.EXPAND) + + temp = gtk.Label("Tooltip Show Timeout (seconds)") + temp.set_alignment(0, 0.5) + self.tableTooltip.attach(temp, 0, 1, 2, 3, xpadding=10) + self.tooltipShowTime = gtk.Entry(6) + self.tooltipShowTime.set_width_chars(8) + self.tooltipShowTime.set_text(TOOLTIP_SHOW_TIMEOUT) + self.tooltipShowTime.connect("changed", self.changeOccurred) + self.tableTooltip.attach(self.tooltipShowTime, 1, 2, 2, 3, xoptions=gtk.EXPAND) + + temp = gtk.Label("Tooltip Hide Timeout (seconds)") + temp.set_alignment(0, 0.5) + self.tableTooltip.attach(temp, 0, 1, 3, 4, xpadding=10) + self.tooltipHideTime = gtk.Entry(6) + self.tooltipHideTime.set_width_chars(8) + self.tooltipHideTime.set_text(TOOLTIP_HIDE_TIMEOUT) + self.tooltipHideTime.connect("changed", self.changeOccurred) + self.tableTooltip.attach(self.tooltipHideTime, 1, 2, 3, 4, xoptions=gtk.EXPAND) + + temp = gtk.Label("Tooltip Background ID") + temp.set_alignment(0, 0.5) + self.tableTooltip.attach(temp, 0, 1, 4, 5, xpadding=10) + self.tooltipBg = gtk.combo_box_new_text() + self.tooltipBg.append_text("0 (fully transparent)") + for i in range(len(self.bgs)): + self.tooltipBg.append_text(str(i+1)) + self.tooltipBg.set_active(0) + self.tooltipBg.connect("changed", self.changeOccurred) + self.tableTooltip.attach(self.tooltipBg, 1, 2, 4, 5, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Tooltip Font") + temp.set_alignment(0, 0.5) + self.tableTooltip.attach(temp, 0, 1, 5, 6, xpadding=10) + self.tooltipFont = gtk.FontButton() + self.tooltipFont.set_font_name(self.defaults["font"]) + self.tooltipFont.connect("font-set", self.changeOccurred) + self.tableTooltip.attach(self.tooltipFont, 1, 2, 5, 6, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Tooltip Font Color") + temp.set_alignment(0, 0.5) + self.tableTooltip.attach(temp, 0, 1, 6, 7, xpadding=10) + self.tooltipFontCol = gtk.Entry(7) + self.tooltipFontCol.set_width_chars(9) + self.tooltipFontCol.set_name("tooltipFontCol") + self.tooltipFontCol.connect("activate", self.colorTyped) + self.tableTooltip.attach(self.tooltipFontCol, 1, 2, 6, 7, xoptions=gtk.EXPAND) + self.tooltipFontColButton = gtk.ColorButton(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.tooltipFontColButton.set_use_alpha(True) + self.tooltipFontColButton.set_name("tooltipFontCol") + self.tooltipFontColButton.connect("color-set", self.colorChange) + self.tableTooltip.attach(self.tooltipFontColButton, 2, 3, 6, 7, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + self.tooltipFontCol.set_text(self.defaults["fgColor"]) + # Add this AFTER we set color to avoid "changed" event + self.clockFontCol.connect("changed", self.changeOccurred) + + # Mouse Options + self.tableMouse = gtk.Table(rows=4, columns=3, homogeneous=False) + self.tableMouse.set_row_spacings(5) + self.tableMouse.set_col_spacings(5) + + temp = gtk.Label("Middle Mouse Click Action") + temp.set_alignment(0, 0.5) + self.tableMouse.attach(temp, 0, 1, 0, 1, xpadding=10) + self.mouseMiddle = gtk.combo_box_new_text() + self.mouseMiddle.append_text("none") + self.mouseMiddle.append_text("close") + self.mouseMiddle.append_text("toggle") + self.mouseMiddle.append_text("iconify") + self.mouseMiddle.append_text("shade") + self.mouseMiddle.append_text("toggle_iconify") + self.mouseMiddle.append_text("maximize_restore") + self.mouseMiddle.append_text("desktop_left") + self.mouseMiddle.append_text("desktop_right") + self.mouseMiddle.set_active(0) + self.mouseMiddle.connect("changed", self.changeOccurred) + self.tableMouse.attach(self.mouseMiddle, 1, 2, 0, 1, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Right Mouse Click Action") + temp.set_alignment(0, 0.5) + self.tableMouse.attach(temp, 0, 1, 1, 2, xpadding=10) + self.mouseRight = gtk.combo_box_new_text() + self.mouseRight.append_text("none") + self.mouseRight.append_text("close") + self.mouseRight.append_text("toggle") + self.mouseRight.append_text("iconify") + self.mouseRight.append_text("shade") + self.mouseRight.append_text("toggle_iconify") + self.mouseRight.append_text("maximize_restore") + self.mouseRight.append_text("desktop_left") + self.mouseRight.append_text("desktop_right") + self.mouseRight.set_active(0) + self.mouseRight.connect("changed", self.changeOccurred) + self.tableMouse.attach(self.mouseRight, 1, 2, 1, 2, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Mouse Wheel Scroll Up Action") + temp.set_alignment(0, 0.5) + self.tableMouse.attach(temp, 0, 1, 2, 3, xpadding=10) + self.mouseUp = gtk.combo_box_new_text() + self.mouseUp.append_text("none") + self.mouseUp.append_text("close") + self.mouseUp.append_text("toggle") + self.mouseUp.append_text("iconify") + self.mouseUp.append_text("shade") + self.mouseUp.append_text("toggle_iconify") + self.mouseUp.append_text("maximize_restore") + self.mouseUp.append_text("desktop_left") + self.mouseUp.append_text("desktop_right") + self.mouseUp.set_active(0) + self.mouseUp.connect("changed", self.changeOccurred) + self.tableMouse.attach(self.mouseUp, 1, 2, 2, 3, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Mouse Wheel Scroll Down Action") + temp.set_alignment(0, 0.5) + self.tableMouse.attach(temp, 0, 1, 3, 4, xpadding=10) + self.mouseDown = gtk.combo_box_new_text() + self.mouseDown.append_text("none") + self.mouseDown.append_text("close") + self.mouseDown.append_text("toggle") + self.mouseDown.append_text("iconify") + self.mouseDown.append_text("shade") + self.mouseDown.append_text("toggle_iconify") + self.mouseDown.append_text("maximize_restore") + self.mouseDown.append_text("desktop_left") + self.mouseDown.append_text("desktop_right") + self.mouseDown.set_active(0) + self.mouseDown.connect("changed", self.changeOccurred) + self.tableMouse.attach(self.mouseDown, 1, 2, 3, 4, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + # Battery Options + self.tableBattery = gtk.Table(rows=8, columns=3, homogeneous=False) + self.tableBattery.set_row_spacings(5) + self.tableBattery.set_col_spacings(5) + + temp = gtk.Label("Show Battery Applet") + temp.set_alignment(0, 0.5) + self.tableBattery.attach(temp, 0, 1, 0, 1, xpadding=10) + self.batteryCheckButton = gtk.CheckButton() + self.batteryCheckButton.set_active(False) + self.batteryCheckButton.connect("toggled", self.changeOccurred) + self.tableBattery.attach(self.batteryCheckButton, 1, 2, 0, 1, xoptions=gtk.EXPAND) + + temp = gtk.Label("Battery Low Status (%)") + temp.set_alignment(0, 0.5) + self.tableBattery.attach(temp, 0, 1, 1, 2, xpadding=10) + self.batteryLow = gtk.Entry(6) + self.batteryLow.set_width_chars(8) + self.batteryLow.set_text(BATTERY_LOW) + self.batteryLow.connect("changed", self.changeOccurred) + self.tableBattery.attach(self.batteryLow, 1, 2, 1, 2, xoptions=gtk.EXPAND) + + temp = gtk.Label("Battery Low Action") + temp.set_alignment(0, 0.5) + self.tableBattery.attach(temp, 0, 1, 2, 3, xpadding=10) + self.batteryLowAction = gtk.Entry(150) + self.batteryLowAction.set_width_chars(32) + self.batteryLowAction.set_text(BATTERY_ACTION) + self.batteryLowAction.connect("changed", self.changeOccurred) + self.tableBattery.attach(self.batteryLowAction, 1, 3, 2, 3, xoptions=gtk.EXPAND) + + temp = gtk.Label("Battery 1 Font") + temp.set_alignment(0, 0.5) + self.tableBattery.attach(temp, 0, 1, 3, 4, xpadding=10) + self.bat1FontButton = gtk.FontButton() + self.bat1FontButton.set_font_name(self.defaults["font"]) + self.bat1FontButton.connect("font-set", self.changeOccurred) + self.tableBattery.attach(self.bat1FontButton, 1, 2, 3, 4, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Battery 2 Font") + temp.set_alignment(0, 0.5) + self.tableBattery.attach(temp, 0, 1, 4, 5, xpadding=10) + self.bat2FontButton = gtk.FontButton() + self.bat2FontButton.set_font_name(self.defaults["font"]) + self.bat2FontButton.connect("font-set", self.changeOccurred) + self.tableBattery.attach(self.bat2FontButton, 1, 2, 4, 5, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Battery Font Color") + temp.set_alignment(0, 0.5) + self.tableBattery.attach(temp, 0, 1, 5, 6, xpadding=10) + self.batteryFontCol = gtk.Entry(7) + self.batteryFontCol.set_width_chars(9) + self.batteryFontCol.set_name("batteryFontCol") + self.batteryFontCol.connect("activate", self.colorTyped) + self.tableBattery.attach(self.batteryFontCol, 1, 2, 5, 6, xoptions=gtk.EXPAND) + self.batteryFontColButton = gtk.ColorButton(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.batteryFontColButton.set_use_alpha(True) + self.batteryFontColButton.set_name("batteryFontCol") + self.batteryFontColButton.connect("color-set", self.colorChange) + self.tableBattery.attach(self.batteryFontColButton, 2, 3, 5, 6, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + self.batteryFontCol.set_text(self.defaults["fgColor"]) + # Add this AFTER we set color to avoid "changed" event + self.batteryFontCol.connect("changed", self.changeOccurred) + + temp = gtk.Label("Padding (x, y)") + temp.set_alignment(0, 0.5) + self.tableBattery.attach(temp, 0, 1, 6, 7, xpadding=10) + self.batteryPadX = gtk.Entry(6) + self.batteryPadX.set_width_chars(8) + self.batteryPadX.set_text(BATTERY_PADDING_X) + self.batteryPadX.connect("changed", self.changeOccurred) + self.tableBattery.attach(self.batteryPadX, 1, 2, 6, 7, xoptions=gtk.EXPAND) + self.batteryPadY = gtk.Entry(6) + self.batteryPadY.set_width_chars(8) + self.batteryPadY.set_text(BATTERY_PADDING_Y) + self.batteryPadY.connect("changed", self.changeOccurred) + self.tableBattery.attach(self.batteryPadY, 2, 3, 6, 7, xoptions=gtk.EXPAND) + + temp = gtk.Label("Battery Background ID") + temp.set_alignment(0, 0.5) + self.tableBattery.attach(temp, 0, 1, 7, 8, xpadding=10) + self.batteryBg = gtk.combo_box_new_text() + self.batteryBg.append_text("0 (fully transparent)") + for i in range(len(self.bgs)): + self.batteryBg.append_text(str(i+1)) + self.batteryBg.set_active(0) + self.batteryBg.connect("changed", self.changeOccurred) + self.tableBattery.attach(self.batteryBg, 1, 2, 7, 8, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + # View Config + self.configArea = gtk.ScrolledWindow() + self.configBuf = gtk.TextBuffer() + self.configTextView = gtk.TextView(self.configBuf) + self.configArea.add_with_viewport(self.configTextView) + + # Add backgrounds to notebooks + for i in range(self.defaults["bgCount"]): + self.addBgClick(None, init=True) + + self.bgNotebook.set_current_page(0) + + # Create sub-notebooks + self.taskNotebook = gtk.Notebook() + self.taskNotebook.set_tab_pos(gtk.POS_TOP) + self.taskNotebook.set_current_page(0) + + self.taskNotebook.append_page(self.tableTask, gtk.Label("Task Settings")) + self.taskNotebook.append_page(self.tableIcon, gtk.Label("Task Icons")) + self.taskNotebook.append_page(self.tableFont, gtk.Label("Task Fonts")) + + self.clockNotebook = gtk.Notebook() + self.clockNotebook.set_tab_pos(gtk.POS_TOP) + self.clockNotebook.set_current_page(0) + + self.clockNotebook.append_page(self.tableClockDisplays, gtk.Label("Clock Display")) + self.clockNotebook.append_page(self.tableClockSettings, gtk.Label("Clock Settings")) + + # Add pages to notebook + self.notebook.append_page(self.tableBgs, gtk.Label("Backgrounds")) + self.notebook.append_page(self.tablePanel, gtk.Label("Panel")) + self.notebook.append_page(self.tableTaskbar, gtk.Label("Taskbar")) + self.notebook.append_page(self.taskNotebook, gtk.Label("Tasks")) + self.notebook.append_page(self.tableTray, gtk.Label("Systray")) + self.notebook.append_page(self.clockNotebook, gtk.Label("Clock")) + self.notebook.append_page(self.tableMouse, gtk.Label("Mouse")) + self.notebook.append_page(self.tableTooltip, gtk.Label("Tooltips")) + self.notebook.append_page(self.tableBattery, gtk.Label("Battery")) + self.notebook.append_page(self.configArea, gtk.Label("View Config")) + + self.notebook.connect("switch-page", self.switchPage) + + # Add notebook to window and show + self.table.attach(self.notebook, 0, 4, 2, 3, xpadding=5, ypadding=5) + + if self.oneConfigFile: + # Add button Apply and Close + self.box1 = gtk.HBox(False, 20) + self.table.attach(self.box1, 0, 4, 3, 4, xpadding=5, ypadding=5) + temp = gtk.Button("Apply", gtk.STOCK_APPLY) + temp.set_name("applyBg") + temp.connect("clicked", self.apply) + self.box1.pack_start(temp, True, True, 0) + temp = gtk.Button("Close", gtk.STOCK_CLOSE) + temp.set_name("closeBg") + temp.connect("clicked", self.quit) + self.box1.pack_start(temp, True, True, 0) + + # Create and add the status bar to the bottom of the main window + self.statusBar = gtk.Statusbar() + self.statusBar.set_has_resize_grip(True) + self.updateStatusBar("New Config File [*]") + self.table.attach(self.statusBar, 0, 4, 4, 5) + + self.add(self.table) + + self.show_all() + + # Create our property dictionary. This holds the widgets which correspond to each property + self.propUI = { + "panel_monitor": self.panelMonitor, + "panel_position": (self.panelPosY, self.panelPosX, self.panelOrientation), + "panel_size": (self.panelSizeX, self.panelSizeY), + "panel_margin": (self.panelMarginX, self.panelMarginY), + "panel_padding": (self.panelPadX, self.panelPadY, self.panelSpacing), + "wm_menu": self.panelMenu, + "panel_dock": self.panelDock, + "panel_background_id": self.panelBg, + "taskbar_mode": self.taskbarMode, + "taskbar_padding": (self.taskbarPadX, self.taskbarPadY, self.taskbarSpacing), + "taskbar_background_id": self.taskbarBg, + "taskbar_active_background_id": self.taskbarActiveBg, + "task_icon": self.taskIconCheckButton, + "task_text": self.taskTextCheckButton, + "task_centered": self.taskCentreCheckButton, + "task_maximum_size": (self.taskMaxSizeX, self.taskMaxSizeY), + "task_padding": (self.taskPadX, self.taskPadY), + "task_background_id": self.taskBg, + "task_active_background_id": self.taskActiveBg, + "task_font": self.fontButton, + "task_font_color": (self.fontCol, self.fontColButton), + "task_active_font_color": (self.fontActiveCol, self.fontActiveColButton), + "task_icon_asb": (self.iconHue, self.iconSat, self.iconBri), + "task_active_icon_asb": (self.activeIconHue, self.activeIconSat, self.activeIconBri), + "font_shadow": self.fontShadowCheckButton, + "systray": self.trayShow, + "systray_padding": (self.trayPadX, self.trayPadY, self.traySpacing), + "systray_background_id": self.trayBg, + "systray_sort": self.trayOrder, + "time1_format": self.clock1Format, + "time2_format": self.clock2Format, + "time1_font": self.clock1FontButton, + "time2_font": self.clock2FontButton, + "clock_font_color": (self.clockFontCol, self.clockFontColButton), + "clock_padding": (self.clockPadX, self.clockPadY), + "clock_background_id": self.clockBg, + "clock_lclick_command": self.clockLClick, + "clock_rclick_command": self.clockRClick, + "mouse_middle": self.mouseMiddle, + "mouse_right": self.mouseRight, + "mouse_scroll_up": self.mouseUp, + "mouse_scroll_down": self.mouseDown, + "tooltip": self.tooltipShow, + "tooltip_padding": (self.tooltipPadX, self.tooltipPadY), + "tooltip_show_timeout": self.tooltipShowTime, + "tooltip_hide_timeout": self.tooltipHideTime, + "tooltip_background_id": self.tooltipBg, + "tooltip_font": self.tooltipFont, + "tooltip_font_color": (self.tooltipFontCol, self.tooltipFontColButton), + "battery": self.batteryCheckButton, + "battery_low_status": self.batteryLow, + "battery_low_cmd": self.batteryLowAction, + "bat1_font": self.bat1FontButton, + "bat2_font": self.bat2FontButton, + "battery_font_color": (self.batteryFontCol, self.batteryFontColButton), + "battery_padding": (self.batteryPadX, self.batteryPadY), + "battery_background_id": self.batteryBg + } + + if self.oneConfigFile: + self.readTint2Config() + + self.generateConfig() + + def about(self, action=None): + """Displays the About dialog.""" + about = gtk.AboutDialog() + about.set_program_name(NAME) + about.set_version(VERSION) + about.set_authors(AUTHORS) + about.set_comments(COMMENTS) + about.set_website(WEBSITE) + gtk.about_dialog_set_url_hook(self.aboutLinkCallback) + about.run() + about.destroy() + + def aboutLinkCallback(dialog, link, data=None): + """Callback for when a URL is clicked in an About dialog.""" + try: + webbrowser.open(link) + except: + errorDialog(self, "Your default web-browser could not be opened.\nPlease visit %s" % link) + + def addBg(self): + """Adds a new background to the list of backgrounds.""" + self.bgs += [gtk.Table(4, 3, False)] + + temp = gtk.Label("Corner Rounding (px)") + temp.set_alignment(0, 0.5) + self.bgs[-1].attach(temp, 0, 1, 0, 1, xpadding=10) + temp = gtk.Entry(7) + temp.set_width_chars(9) + temp.set_name("rounded") + temp.set_text(BG_ROUNDING) + temp.connect("changed", self.changeOccurred) + self.bgs[-1].attach(temp, 1, 2, 0, 1, xoptions=gtk.EXPAND) + + temp = gtk.Label("Background Color") + temp.set_alignment(0, 0.5) + self.bgs[-1].attach(temp, 0, 1, 1, 2, xpadding=10) + temp = gtk.Entry(7) + temp.set_width_chars(9) + temp.set_name("bgColEntry") + temp.set_text(self.defaults["bgColor"]) + temp.connect("changed", self.changeOccurred) + temp.connect("activate", self.colorTyped) + self.bgs[-1].attach(temp, 1, 2, 1, 2, xoptions=gtk.EXPAND) + temp = gtk.ColorButton(gtk.gdk.color_parse(self.defaults["bgColor"])) + temp.set_use_alpha(True) + temp.set_name("bgCol") + temp.connect("color-set", self.colorChange) + self.bgs[-1].attach(temp, 2, 3, 1, 2, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + temp = gtk.Label("Border Width (px)") + temp.set_alignment(0, 0.5) + self.bgs[-1].attach(temp, 0, 1, 2, 3, xpadding=10) + temp = gtk.Entry(7) + temp.set_width_chars(9) + temp.set_name("border") + temp.set_text(BG_BORDER) + temp.connect("changed", self.changeOccurred) + self.bgs[-1].attach(temp, 1, 2, 2, 3, xoptions=gtk.EXPAND) + + temp = gtk.Label("Border Color") + temp.set_alignment(0, 0.5) + self.bgs[-1].attach(temp, 0, 1, 3, 4, xpadding=10) + temp = gtk.Entry(7) + temp.set_width_chars(9) + temp.set_name("borderColEntry") + temp.connect("activate", self.colorTyped) + temp.set_text(self.defaults["borderColor"]) + temp.connect("changed", self.changeOccurred) + self.bgs[-1].attach(temp, 1, 2, 3, 4, xoptions=gtk.EXPAND) + temp = gtk.ColorButton(gtk.gdk.color_parse(self.defaults["borderColor"])) + temp.set_use_alpha(True) + temp.set_name("borderCol") + temp.connect("color-set", self.colorChange) + self.bgs[-1].attach(temp, 2, 3, 3, 4, xoptions=gtk.EXPAND, yoptions=gtk.EXPAND) + + # Note: Only set init to True when initialising background styles. + # This prevents unwanted calls to changeOccurred() + def addBgClick(self, widget=None, init=False): + """Creates a new background and adds a new tab to the notebook.""" + n = self.bgNotebook.get_n_pages() + + if n > (self.defaults["bgCount"] + 2): + if confirmDialog(self, "You already have %d background styles. Are you sure you would like another?" % n) == gtk.RESPONSE_NO: + return + + self.addBg() + + newId = len(self.bgs) + + self.bgNotebook.append_page(self.bgs[newId-1], gtk.Label("Background ID %d" % (newId))) + + self.bgNotebook.show_all() + + self.updateComboBoxes(n, "add") + + self.bgNotebook.set_current_page(n) + + if not init: + self.changeOccurred() + + def apply(self, widget, event=None, confirmChange=True): + """Applies the current config to tint2.""" + # Check if tint2 is running + procs = os.popen('pidof "tint2"') # Check list of active processes for tint2 + pids = [] # List of process ids for tint2 + + for proc in procs.readlines(): + pids += [int(proc.strip().split(" ")[0])] + + procs.close() + + if self.oneConfigFile: + # Save and copy as default + self.save() + tmpSrc = self.filename + tmpDest = os.path.expandvars("${HOME}") + "/.config/tint2/tint2rc" + try: + shutil.copyfile(tmpSrc, tmpDest) + except shutil.Error: + pass + # Ask tint2 to reload config + for pid in pids: + os.kill(pid, signal.SIGUSR1) + else: + if confirmDialog(self, "This will terminate all currently running instances of tint2 before applying config. Continue?") == gtk.RESPONSE_YES: + if not self.save(): + return + + #shutil.copyfile(self.filename, self.filename+".backup") # Create backup + + # If it is - kill it + for pid in pids: + os.kill(pid, signal.SIGTERM) + + # Lastly, start it + os.spawnv(os.P_NOWAIT, self.tint2Bin, [self.tint2Bin, "-c" + self.filename]) + + if confirmChange and self.filename != (os.path.expandvars("${HOME}") + "/.config/tint2/tint2rc") and confirmDialog(self, "Use this as default tint2 config?") == gtk.RESPONSE_YES: + tmp = self.filename + self.filename = os.path.expandvars("${HOME}") + "/.config/tint2/tint2rc" + try: + shutil.copyfile(tmp, self.filename) + except shutil.Error: + pass + + #if confirmChange and confirmDialog(self, "Keep this config?") == gtk.RESPONSE_NO: + # shutil.copyfile(self.filename+".backup", self.filename) # Create backup + # self.apply(widget, event, False) + + def changeAllFonts(self, widget): + """Changes all fonts at once.""" + dialog = gtk.FontSelectionDialog("Select Font") + + dialog.set_font_name(self.defaults["font"]) + + if dialog.run() == gtk.RESPONSE_OK: + newFont = dialog.get_font_name() + + self.clock1FontButton.set_font_name(newFont) + self.clock2FontButton.set_font_name(newFont) + self.bat1FontButton.set_font_name(newFont) + self.bat2FontButton.set_font_name(newFont) + self.fontButton.set_font_name(newFont) + + dialog.destroy() + + self.generateConfig() + self.changeOccurred() + + def changeDefaults(self, widget=None): + """Shows the style preferences widget.""" + TintWizardPrefGUI(self) + + def changeOccurred(self, widget=None): + """Called when the user changes something, i.e. entry value""" + self.toSave = True + + self.updateStatusBar(change=True) + + if widget == self.panelOrientation: + if self.panelOrientation.get_active_text() == "horizontal": + self.panelSizeLabel.set_text("Size (width, height)") + else: + self.panelSizeLabel.set_text("Size (height, width)") + + def colorChange(self, widget): + """Update the text entry when a color button is updated.""" + r = widget.get_color().red + g = widget.get_color().green + b = widget.get_color().blue + + label = self.getColorLabel(widget) + + # No label found + if not label: + return + + label.set_text(rgbToHex(r, g, b)) + + self.changeOccurred() + + def colorTyped(self, widget): + """Update the color button when a valid value is typed into the entry.""" + s = widget.get_text() + + # The color button associated with this widget. + colorButton = self.getColorButton(widget) + + # Just a precautionary check - this situation should never arise. + if not colorButton: + #print "Error in colorTyped() -- unrecognised entry widget." + return + + # If the entered value is invalid, set textbox to the current + # hex value of the associated color button. + buttonHex = self.getHexFromWidget(colorButton) + + if len(s) != 7: + errorDialog(self, "Invalid color specification!") + #self.colorChange(widget) TODO - remove this when issue 29 is verified + widget.set_text(buttonHex) + return + + try: + col = gtk.gdk.Color(s) + except: + errorDialog(self, "Invalid color specification!") + #self.colorChange(widget) TODO - remove this when issue 29 is verified + widget.set_text(buttonHex) + return + + colorButton.set_color(col) + + # Note: only set init to True when removing backgrounds for a new config + # This prevents unwanted calls to changeOccurred() + def delBgClick(self, widget=None, prompt=True, init=False): + """Deletes the selected background after confirming with the user.""" + selected = self.bgNotebook.get_current_page() + + if selected == -1: # Nothing to remove + return + + if prompt: + if confirmDialog(self, "Remove this background?") != gtk.RESPONSE_YES: + return + + self.bgNotebook.remove_page(selected) + self.bgs.pop(selected) + + for i in range(self.bgNotebook.get_n_pages()): + self.bgNotebook.set_tab_label_text(self.bgNotebook.get_nth_page(i), "Background ID %d" % (i+1)) + + self.bgNotebook.show_all() + + self.updateComboBoxes(len(self.bgs) + 1, "remove") + + if not init: + self.changeOccurred() + + def generateConfig(self): + """Reads values from each widget and generates a config.""" + self.configBuf.delete(self.configBuf.get_start_iter(), self.configBuf.get_end_iter()) + self.configBuf.insert(self.configBuf.get_end_iter(), "# Tint2 config file\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "# Generated by tintwizard (http://code.google.com/p/tintwizard/)\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "# For information on manually configuring tint2 see http://code.google.com/p/tint2/wiki/Configure\n\n") + if not self.oneConfigFile: + self.configBuf.insert(self.configBuf.get_end_iter(), "# To use this as default tint2 config: save as $HOME/.config/tint2/tint2rc\n\n") + + self.configBuf.insert(self.configBuf.get_end_iter(), "# Background definitions\n") + for i in range(len(self.bgs)): + self.configBuf.insert(self.configBuf.get_end_iter(), "# ID %d\n" % (i + 1)) + + for child in self.bgs[i].get_children(): + if child.get_name() == "rounded": + rounded = child.get_text() if child.get_text() else BG_ROUNDING + elif child.get_name() == "border": + borderW = child.get_text() if child.get_text() else BG_BORDER + elif child.get_name() == "bgCol": + bgCol = self.getHexFromWidget(child) + bgAlpha = int(child.get_alpha() / 65535.0 * 100) + elif child.get_name() == "borderCol": + borderCol = self.getHexFromWidget(child) + borderAlpha = int(child.get_alpha() / 65535.0 * 100) + + self.configBuf.insert(self.configBuf.get_end_iter(), "rounded = %s\n" % (rounded)) + self.configBuf.insert(self.configBuf.get_end_iter(), "border_width = %s\n" % (borderW)) + self.configBuf.insert(self.configBuf.get_end_iter(), "background_color = %s %d\n" % (bgCol, bgAlpha)) + self.configBuf.insert(self.configBuf.get_end_iter(), "border_color = %s %d\n\n" % (borderCol, borderAlpha)) + + self.configBuf.insert(self.configBuf.get_end_iter(), "# Panel\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "panel_monitor = %s\n" % (self.panelMonitor.get_text() if self.panelMonitor.get_text() else PANEL_MONITOR)) + self.configBuf.insert(self.configBuf.get_end_iter(), "panel_position = %s %s %s\n" % (self.panelPosY.get_active_text(), self.panelPosX.get_active_text(), self.panelOrientation.get_active_text())) + self.configBuf.insert(self.configBuf.get_end_iter(), "panel_size = %s %s\n" % (self.panelSizeX.get_text() if self.panelSizeX.get_text() else PANEL_SIZE_X, + self.panelSizeY.get_text() if self.panelSizeY.get_text() else PANEL_SIZE_Y)) + self.configBuf.insert(self.configBuf.get_end_iter(), "panel_margin = %s %s\n" % (self.panelMarginX.get_text() if self.panelMarginX.get_text() else PANEL_MARGIN_X, + self.panelMarginY.get_text() if self.panelMarginY.get_text() else PANEL_MARGIN_Y)) + self.configBuf.insert(self.configBuf.get_end_iter(), "panel_padding = %s %s %s\n" % (self.panelPadX.get_text() if self.panelPadX.get_text() else PANEL_PADDING_X, + self.panelPadY.get_text() if self.panelPadY.get_text() else PANEL_PADDING_Y, + self.panelSpacing.get_text() if self.panelSpacing.get_text() else TASKBAR_SPACING)) + self.configBuf.insert(self.configBuf.get_end_iter(), "panel_dock = %s\n" % int(self.panelDock.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "wm_menu = %s\n" % int(self.panelMenu.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "panel_background_id = %s\n" % (self.panelBg.get_active())) + + self.configBuf.insert(self.configBuf.get_end_iter(), "\n# Taskbar\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "taskbar_mode = %s\n" % (self.taskbarMode.get_active_text())) + self.configBuf.insert(self.configBuf.get_end_iter(), "taskbar_padding = %s %s %s\n" % (self.taskbarPadX.get_text() if self.taskbarPadX.get_text() else TASKBAR_PADDING_X, + self.taskbarPadY.get_text() if self.taskbarPadY.get_text() else TASKBAR_PADDING_X, + self.taskbarSpacing.get_text() if self.taskbarSpacing.get_text() else TASK_SPACING)) + self.configBuf.insert(self.configBuf.get_end_iter(), "taskbar_background_id = %s\n" % (self.taskbarBg.get_active())) + # Comment out the taskbar_active_background_id if user has "disabled" it + if self.taskbarActiveBgEnable.get_active() == 0: + self.configBuf.insert(self.configBuf.get_end_iter(), "#") + self.configBuf.insert(self.configBuf.get_end_iter(), "taskbar_active_background_id = %s\n" % (self.taskbarActiveBg.get_active())) + + self.configBuf.insert(self.configBuf.get_end_iter(), "\n# Tasks\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "urgent_nb_of_blink = %s\n" % (self.taskBlinks.get_text() if self.taskBlinks.get_text() else TASK_BLINKS)) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_icon = %s\n" % int(self.taskIconCheckButton.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_text = %s\n" % int(self.taskTextCheckButton.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_centered = %s\n" % int(self.taskCentreCheckButton.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_maximum_size = %s %s\n" % (self.taskMaxSizeX.get_text() if self.taskMaxSizeX.get_text() else TASK_MAXIMUM_SIZE_X, self.taskMaxSizeY.get_text() if self.taskMaxSizeY.get_text() else TASK_MAXIMUM_SIZE_Y)) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_padding = %s %s\n" % (self.taskPadX.get_text() if self.taskPadX.get_text() else TASK_PADDING_X, + self.taskPadY.get_text() if self.taskPadY.get_text() else TASK_PADDING_Y)) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_background_id = %s\n" % (self.taskBg.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_active_background_id = %s\n" % (self.taskActiveBg.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_icon_asb = %s %s %s\n" % (self.iconHue.get_text() if self.iconHue.get_text() else ICON_ALPHA, + self.iconSat.get_text() if self.iconSat.get_text() else ICON_SAT, + self.iconBri.get_text() if self.iconBri.get_text() else ICON_BRI)) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_active_icon_asb = %s %s %s\n" % (self.activeIconHue.get_text() if self.activeIconHue.get_text() else ACTIVE_ICON_ALPHA, + self.activeIconSat.get_text() if self.activeIconSat.get_text() else ACTIVE_ICON_SAT, + self.activeIconBri.get_text() if self.activeIconBri.get_text() else ACTIVE_ICON_BRI)) + + self.configBuf.insert(self.configBuf.get_end_iter(), "\n# Fonts\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "task_font = %s\n" % (self.fontButton.get_font_name())) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_font_color = %s %s\n" % (self.getHexFromWidget(self.fontColButton), + int(self.fontColButton.get_alpha() / 65535.0 * 100))) + self.configBuf.insert(self.configBuf.get_end_iter(), "task_active_font_color = %s %s\n" % (self.getHexFromWidget(self.fontActiveColButton), + int(self.fontActiveColButton.get_alpha() / 65535.0 * 100))) + self.configBuf.insert(self.configBuf.get_end_iter(), "font_shadow = %s\n" % int(self.fontShadowCheckButton.get_active())) + + self.configBuf.insert(self.configBuf.get_end_iter(), "\n# Systray\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "systray = %s\n" % int(self.trayShow.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "systray_padding = %s %s %s\n" % (self.trayPadX.get_text() if self.trayPadX.get_text() else TRAY_PADDING_X, + self.trayPadY.get_text() if self.trayPadY.get_text() else TRAY_PADDING_Y, + self.traySpacing.get_text() if self.traySpacing.get_text() else TRAY_SPACING)) + self.configBuf.insert(self.configBuf.get_end_iter(), "systray_sort = %s\n" % (self.trayOrder.get_active_text())) + self.configBuf.insert(self.configBuf.get_end_iter(), "systray_background_id = %s\n" % (self.trayBg.get_active())) + + if self.clockCheckButton.get_active(): + self.configBuf.insert(self.configBuf.get_end_iter(), "\n# Clock\n") + if self.clock1CheckButton.get_active(): + self.configBuf.insert(self.configBuf.get_end_iter(), "time1_format = %s\n" % (self.clock1Format.get_text() if self.clock1Format.get_text() else CLOCK_FMT_1)) + self.configBuf.insert(self.configBuf.get_end_iter(), "time1_font = %s\n" % (self.clock1FontButton.get_font_name())) + if self.clock2CheckButton.get_active(): + self.configBuf.insert(self.configBuf.get_end_iter(), "time2_format = %s\n" % (self.clock2Format.get_text() if self.clock2Format.get_text() else CLOCK_FMT_2)) + self.configBuf.insert(self.configBuf.get_end_iter(), "time2_font = %s\n" % (self.clock2FontButton.get_font_name())) + self.configBuf.insert(self.configBuf.get_end_iter(), "clock_font_color = %s %s\n" % (self.getHexFromWidget(self.clockFontColButton), + int(self.clockFontColButton.get_alpha() / 65535.0 * 100))) + self.configBuf.insert(self.configBuf.get_end_iter(), "clock_padding = %s %s\n" % (self.clockPadX.get_text() if self.clockPadX.get_text() else CLOCK_PADDING_X, + self.clockPadY.get_text() if self.clockPadY.get_text() else CLOCK_PADDING_Y)) + self.configBuf.insert(self.configBuf.get_end_iter(), "clock_background_id = %s\n" % (self.clockBg.get_active())) + if self.clockLClick.get_text(): + self.configBuf.insert(self.configBuf.get_end_iter(), "clock_lclick_command = %s\n" % (self.clockLClick.get_text())) + if self.clockRClick.get_text(): + self.configBuf.insert(self.configBuf.get_end_iter(), "clock_rclick_command = %s\n" % (self.clockRClick.get_text())) + + self.configBuf.insert(self.configBuf.get_end_iter(), "\n# Tooltips\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "tooltip = %s\n" % int(self.tooltipShow.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "tooltip_padding = %s %s\n" % (self.tooltipPadX.get_text() if self.tooltipPadX.get_text() else TOOLTIP_PADDING_Y, + self.tooltipPadY.get_text() if self.tooltipPadY.get_text() else TOOLTIP_PADDING_Y)) + self.configBuf.insert(self.configBuf.get_end_iter(), "tooltip_show_timeout = %s\n" % (self.tooltipShowTime.get_text() if self.tooltipShowTime.get_text() else TOOLTIP_SHOW_TIMEOUT)) + self.configBuf.insert(self.configBuf.get_end_iter(), "tooltip_hide_timeout = %s\n" % (self.tooltipHideTime.get_text() if self.tooltipHideTime.get_text() else TOOLTIP_HIDE_TIMEOUT)) + self.configBuf.insert(self.configBuf.get_end_iter(), "tooltip_background_id = %s\n" % (self.tooltipBg.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "tooltip_font = %s\n" % (self.tooltipFont.get_font_name())) + self.configBuf.insert(self.configBuf.get_end_iter(), "tooltip_font_color = %s %s\n" % (self.getHexFromWidget(self.tooltipFontColButton), + int(self.tooltipFontColButton.get_alpha() / 65535.0 * 100))) + + self.configBuf.insert(self.configBuf.get_end_iter(), "\n# Mouse\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "mouse_middle = %s\n" % (self.mouseMiddle.get_active_text())) + self.configBuf.insert(self.configBuf.get_end_iter(), "mouse_right = %s\n" % (self.mouseRight.get_active_text())) + self.configBuf.insert(self.configBuf.get_end_iter(), "mouse_scroll_up = %s\n" % (self.mouseUp.get_active_text())) + self.configBuf.insert(self.configBuf.get_end_iter(), "mouse_scroll_down = %s\n" % (self.mouseDown.get_active_text())) + + self.configBuf.insert(self.configBuf.get_end_iter(), "\n# Battery\n") + self.configBuf.insert(self.configBuf.get_end_iter(), "battery = %s\n" % int(self.batteryCheckButton.get_active())) + self.configBuf.insert(self.configBuf.get_end_iter(), "battery_low_status = %s\n" % (self.batteryLow.get_text() if self.batteryLow.get_text() else BATTERY_LOW)) + self.configBuf.insert(self.configBuf.get_end_iter(), "battery_low_cmd = %s\n" % (self.batteryLowAction.get_text() if self.batteryLowAction.get_text() else BATTERY_ACTION)) + self.configBuf.insert(self.configBuf.get_end_iter(), "bat1_font = %s\n" % (self.bat1FontButton.get_font_name())) + self.configBuf.insert(self.configBuf.get_end_iter(), "bat2_font = %s\n" % (self.bat2FontButton.get_font_name())) + self.configBuf.insert(self.configBuf.get_end_iter(), "battery_font_color = %s %s\n" % (self.getHexFromWidget(self.batteryFontColButton), + int(self.batteryFontColButton.get_alpha() / 65535.0 * 100))) + self.configBuf.insert(self.configBuf.get_end_iter(), "battery_padding = %s %s\n" % (self.batteryPadX.get_text() if self.batteryPadX.get_text() else BATTERY_PADDING_Y, + self.batteryPadY.get_text() if self.batteryPadY.get_text() else BATTERY_PADDING_Y)) + self.configBuf.insert(self.configBuf.get_end_iter(), "battery_background_id = %s\n" % (self.batteryBg.get_active())) + + self.configBuf.insert(self.configBuf.get_end_iter(), "\n# End of config") + + def getColorButton(self, widget): + """Returns the color button associated with widget.""" + if widget.get_name() == "fontCol": + return self.fontColButton + elif widget.get_name() == "fontActiveCol": + return self.fontActiveColButton + elif widget.get_name() == "clockFontCol": + return self.clockFontColButton + elif widget.get_name() == "batteryFontCol": + return self.batteryFontColButton + elif widget.get_name() == "tooltipFontCol": + return self.tooltipFontColButton + elif widget.get_name() == "bgColEntry": + bgID = self.bgNotebook.get_current_page() + + for child in self.bgs[bgID].get_children(): + if child.get_name() == "bgCol": + + return child + elif widget.get_name() == "borderColEntry": + bgID = self.bgNotebook.get_current_page() + + for child in self.bgs[bgID].get_children(): + if child.get_name() == "borderCol": + + return child + + # No button found which matches label + return None + + def getColorLabel(self, widget): + """Gets the color label associated with a color button.""" + if widget.get_name() == "fontCol": + return self.fontCol + elif widget.get_name() == "fontActiveCol": + return self.fontActiveCol + elif widget.get_name() == "clockFontCol": + return self.clockFontCol + elif widget.get_name() == "batteryFontCol": + return self.batteryFontCol + elif widget.get_name() == "tooltipFontCol": + return self.tooltipFontCol + elif widget.get_name() == "bgCol": + bgID = self.bgNotebook.get_current_page() + + for child in self.bgs[bgID].get_children(): + if child.get_name() == "bgColEntry": + + return child + elif widget.get_name() == "borderCol": + bgID = self.bgNotebook.get_current_page() + + for child in self.bgs[bgID].get_children(): + if child.get_name() == "borderColEntry": + + return child + + # No label found which matches color button + return None + + def getHexFromWidget(self, widget): + """Returns the #RRGGBB value of a widget.""" + r = widget.get_color().red + g = widget.get_color().green + b = widget.get_color().blue + + return rgbToHex(r, g, b) + + def help(self, action=None): + """Opens the Help wiki page in the default web browser.""" + try: + webbrowser.open("http://code.google.com/p/tintwizard/wiki/Help") + except: + errorDialog(self, "Your default web-browser could not be opened.\nPlease visit http://code.google.com/p/tintwizard/wiki/Help") + + def reportBug(self, action=None): + """Opens the bug report page in the default web browser.""" + try: + webbrowser.open("http://code.google.com/p/tintwizard/issues/entry") + except: + errorDialog(self, "Your default web-browser could not be opened.\nPlease visit http://code.google.com/p/tintwizard/issues/entry") + + def main(self): + """Enters the main loop.""" + gtk.main() + + def resetConfig(self): + """Resets all the widgets to their default values.""" + # Backgrounds + for i in range(len(self.bgs)): + self.delBgClick(prompt=False, init=True) + + for i in range(self.defaults["bgCount"]): + self.addBgClick(init=True) + + self.bgNotebook.set_current_page(0) + + # Panel + self.panelPosY.set_active(0) + self.panelPosX.set_active(0) + self.panelOrientation.set_active(0) + self.panelSizeX.set_text(PANEL_SIZE_X) + self.panelSizeY.set_text(PANEL_SIZE_Y) + self.panelMarginX.set_text(PANEL_MARGIN_X) + self.panelMarginY.set_text(PANEL_MARGIN_Y) + self.panelPadX.set_text(PANEL_PADDING_Y) + self.panelPadY.set_text(PANEL_PADDING_Y) + self.panelSpacing.set_text(TASKBAR_SPACING) + self.panelBg.set_active(0) + self.panelMenu.set_active(0) + self.panelDock.set_active(0) + self.panelMonitor.set_text(PANEL_MONITOR) + # Taskbar + self.taskbarMode.set_active(0) + self.taskbarPadX.set_text(TASKBAR_PADDING_X) + self.taskbarPadY.set_text(TASKBAR_PADDING_Y) + self.taskbarSpacing.set_text(TASK_SPACING) + self.taskbarBg.set_active(0) + self.taskbarActiveBg.set_active(0) + self.taskbarActiveBgEnable.set_active(0) + # Tasks + self.taskBlinks.set_text(TASK_BLINKS) + self.taskCentreCheckButton.set_active(True) + self.taskTextCheckButton.set_active(True) + self.taskIconCheckButton.set_active(True) + self.taskMaxSizeX.set_text(TASK_MAXIMUM_SIZE_X) + self.taskMaxSizeY.set_text(TASK_MAXIMUM_SIZE_Y) + self.taskPadX.set_text(TASK_PADDING_X) + self.taskPadY.set_text(TASK_PADDING_Y) + self.taskBg.set_active(0) + self.taskActiveBg.set_active(0) + # Icons + self.iconHue.set_text(ICON_ALPHA) + self.iconSat.set_text(ICON_SAT) + self.iconBri.set_text(ICON_BRI) + self.activeIconHue.set_text(ACTIVE_ICON_ALPHA) + self.activeIconSat.set_text(ACTIVE_ICON_SAT) + self.activeIconBri.set_text(ACTIVE_ICON_BRI) + # Fonts + self.fontButton.set_font_name(self.defaults["font"]) + self.fontColButton.set_alpha(65535) + self.fontColButton.set_color(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.fontCol.set_text(self.defaults["fgColor"]) + self.fontActiveColButton.set_alpha(65535) + self.fontActiveColButton.set_color(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.fontActiveCol.set_text(self.defaults["fgColor"]) + self.fontShadowCheckButton.set_active(False) + # Systray + self.trayShow.set_active(True) + self.trayPadX.set_text(TRAY_PADDING_X) + self.trayPadY.set_text(TRAY_PADDING_X) + self.traySpacing.set_text(TRAY_SPACING) + self.trayOrder.set_active(0) + self.trayBg.set_active(0) + # Clock + self.clockCheckButton.set_active(True) + self.clock1Format.set_text(CLOCK_FMT_1) + self.clock1CheckButton.set_active(True) + self.clock1FontButton.set_font_name(self.defaults["font"]) + self.clock2Format.set_text(CLOCK_FMT_2) + self.clock2CheckButton.set_active(True) + self.clock2FontButton.set_font_name(self.defaults["font"]) + self.clockFontColButton.set_alpha(65535) + self.clockFontColButton.set_color(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.clockFontCol.set_text(self.defaults["fgColor"]) + self.clockPadX.set_text(CLOCK_PADDING_X) + self.clockPadY.set_text(CLOCK_PADDING_Y) + self.clockBg.set_active(0) + self.clockLClick.set_text(CLOCK_LCLICK) + self.clockRClick.set_text(CLOCK_RCLICK) + # Tooltips + self.tooltipShow.set_active(False) + self.tooltipPadX.set_text(TOOLTIP_PADDING_X) + self.tooltipPadY.set_text(TOOLTIP_PADDING_Y) + self.tooltipShowTime.set_text(TOOLTIP_SHOW_TIMEOUT) + self.tooltipHideTime.set_text(TOOLTIP_HIDE_TIMEOUT) + self.tooltipBg.set_active(0) + self.tooltipFont.set_font_name(self.defaults["font"]) + self.tooltipFontColButton.set_alpha(65535) + self.tooltipFontColButton.set_color(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.tooltipFontCol.set_text(self.defaults["fgColor"]) + # Mouse + self.mouseMiddle.set_active(0) + self.mouseRight.set_active(0) + self.mouseUp.set_active(0) + self.mouseDown.set_active(0) + # Battery + self.batteryCheckButton.set_active(False) + self.batteryLow.set_text(BATTERY_LOW) + self.batteryLowAction.set_text(BATTERY_ACTION) + self.bat1FontButton.set_font_name(self.defaults["font"]) + self.bat2FontButton.set_font_name(self.defaults["font"]) + self.batteryFontColButton.set_alpha(65535) + self.batteryFontColButton.set_color(gtk.gdk.color_parse(self.defaults["fgColor"])) + self.batteryFontCol.set_text(self.defaults["fgColor"]) + self.batteryPadX.set_text(BATTERY_PADDING_Y) + self.batteryPadY.set_text(BATTERY_PADDING_Y) + self.batteryBg.set_active(0) + + def new(self, action=None): + """Prepares a new config.""" + if self.toSave: + self.savePrompt() + + self.toSave = True + self.filename = None + + self.resetConfig() + + self.generateConfig() + self.updateStatusBar("New Config File [*]") + + def openDef(self, widget=None): + """Opens the default tint2 config.""" + self.openFile(default=True) + + def openFile(self, widget=None, default=False): + """Reads from a config file. If default=True, open the tint2 default config.""" + self.new() + + if not default: + chooser = gtk.FileChooserDialog("Open Config File", self, gtk.FILE_CHOOSER_ACTION_OPEN, (gtk.STOCK_CANCEL, gtk.RESPONSE_CANCEL, gtk.STOCK_OPEN, gtk.RESPONSE_OK)) + chooser.set_default_response(gtk.RESPONSE_OK) + + if self.curDir != None: + chooser.set_current_folder(self.curDir) + + chooserFilter = gtk.FileFilter() + chooserFilter.set_name("All files") + chooserFilter.add_pattern("*") + chooser.add_filter(chooserFilter) + chooser.show() + + response = chooser.run() + + if response == gtk.RESPONSE_OK: + self.filename = chooser.get_filename() + self.curDir = os.path.dirname(self.filename) + else: + chooser.destroy() + return + + chooser.destroy() + else: + self.filename = os.path.expandvars("$HOME/.config/tint2/tint2rc") + self.curDir = os.path.expandvars("$HOME/.config/tint2") + + self.readTint2Config() + self.generateConfig() + self.updateStatusBar() + + def addBgDefs(self, bgDefs): + """Add interface elements for a list of background style definitions. bgDefs + should be a list containing dictionaries with the following keys: rounded, + border_width, background_color, border_color""" + for d in bgDefs: + self.addBg() + + for child in self.bgs[-1].get_children(): + if child.get_name() == "rounded": + child.set_text(d["rounded"]) + elif child.get_name() == "border": + child.set_text(d["border_width"]) + elif child.get_name() == "bgColEntry": + child.set_text(d["background_color"].split(" ")[0].strip()) + child.activate() + elif child.get_name() == "borderColEntry": + child.set_text(d["border_color"].split(" ")[0].strip()) + child.activate() + elif child.get_name() == "bgCol": + list = d["background_color"].split(" ") + if len(list) > 1: + child.set_alpha(int(int(list[1].strip()) * 65535 / 100.0)) + else: + child.set_alpha(65535) + elif child.get_name() == "borderCol": + list = d["border_color"].split(" ") + if len(list) > 1: + child.set_alpha(int(int(list[1].strip()) * 65535 / 100.0)) + else: + child.set_alpha(65535) + + newId = len(self.bgs) + + self.bgNotebook.append_page(self.bgs[newId-1], gtk.Label("Background ID %d" % (newId))) + + self.bgNotebook.show_all() + + self.updateComboBoxes(newId-1, "add") + + self.bgNotebook.set_current_page(newId) + + def parseBgs(self, string): + """Parses the background definitions from a string.""" + s = string.split("\n") + + bgDefs = [] + cur = -1 + bgKeys = ["border_width", "background_color", "border_color"] + newString = "" + + for line in s: + data = [token.strip() for token in line.split("=")] + + if data[0] == "rounded": # It may be considered bad practice to + bgDefs += [{"rounded": data[1]}] # find each style definition with an + elif data[0] in bgKeys: # arbitrary value, but tint2 does the same. + bgDefs[cur][data[0]] = data[1] # This means that any existing configs must + else: # start with 'rounded'. + newString += "%s\n" % line + + self.addBgDefs(bgDefs) + + return newString + + def parseConfig(self, string): + """Parses the contents of a config file.""" + for line in string.split("\n"): + s = line.split("=") # Create a list with KEY and VALUE + + e = s[0].strip() # Strip whitespace from KEY + + if e == "time1_format": # Set the VALUE of KEY + self.parseProp(self.propUI[e], s[1], True, "time1") + elif e == "time2_format": + self.parseProp(self.propUI[e], s[1], True, "time2") + elif e == "systray_padding": + self.parseProp(self.propUI[e], s[1], True, "tray") + elif e == "taskbar_active_background_id": + self.parseProp(self.propUI[e], s[1], True, "activeBg") + else: + if self.propUI.has_key(e): + self.parseProp(self.propUI[e], s[1]) + + def parseProp(self, prop, string, special=False, propType=""): + """Parses a variable definition from the conf file and updates the correct UI widget.""" + string = string.strip() # Remove whitespace from the VALUE + eType = type(prop) # Get widget type + + if special: # 'Special' properties are those which are optional + if propType == "time1": + self.clockCheckButton.set_active(True) + self.clock1CheckButton.set_active(True) + elif propType == "time2": + self.clockCheckButton.set_active(True) + self.clock2CheckButton.set_active(True) + elif propType == "tray": + self.trayShow.set_active(True) + elif propType == "activeBg": + self.taskbarActiveBgEnable.set_active(True) + + if eType == gtk.Entry: + prop.set_text(string) + prop.activate() + elif eType == gtk.ComboBox: + if string in ["bottom", "top", "left", "right", "center", "single_desktop", "multi_desktop", "single_monitor", + "none", "close", "shade", "iconify", "toggle", "toggle_iconify", "maximize_restore", + "desktop_left", "desktop_right", "horizontal", "vertical", "ascending", "descending", + "left2right", "right2left"]: + if string in ["bottom", "left", "single_desktop", "none", "horizontal", "ascending"]: + i = 0 + elif string in ["top", "right", "multi_desktop", "close", "vertical", "descending"]: + i = 1 + elif string in ["center", "single_monitor", "toggle", "left2right"]: + i = 2 + elif string in ["right2left"]: + i = 3 + else: + i = ["none", "close", "toggle", "iconify", "shade", "toggle_iconify", "maximize_restore", + "desktop_left", "desktop_right"].index(string) + + prop.set_active(i) + else: + prop.set_active(int(string)) + elif eType == gtk.CheckButton: + prop.set_active(bool(int(string))) + elif eType == gtk.FontButton: + prop.set_font_name(string) + elif eType == gtk.ColorButton: + prop.set_alpha(int(int(string) * 65535 / 100.0)) + elif eType == tuple: # If a property has more than 1 value, for example the x and y co-ords + s = string.split(" ") # of the padding properties, then just we use recursion to set the + for i in range(len(prop)): # value of each associated widget. + if i >= len(s): + self.parseProp(prop[i], "0") + else: + self.parseProp(prop[i], s[i]) + + def quit(self, widget, event=None): + """Asks if user would like to save file before quitting, then quits the program.""" + if self.toSave: + if self.oneConfigFile: + response = gtk.RESPONSE_YES + else: + dialog = gtk.Dialog("Save config?", self, gtk.DIALOG_MODAL, (gtk.STOCK_YES, gtk.RESPONSE_YES, gtk.STOCK_NO, gtk.RESPONSE_NO, gtk.STOCK_CANCEL, gtk.RESPONSE_CANCEL)) + dialog.get_content_area().add(gtk.Label("Save config before quitting?")) + dialog.get_content_area().set_size_request(300, 100) + dialog.show_all() + response = dialog.run() + dialog.destroy() + + if response == gtk.RESPONSE_CANCEL: + return True # Return True to stop it quitting when we hit "Cancel" + elif response == gtk.RESPONSE_NO: + gtk.main_quit() + elif response == gtk.RESPONSE_YES: + self.save() + gtk.main_quit() + else: + gtk.main_quit() + + def readConf(self): + """Reads the tintwizard configuration file - NOT tint2 config files.""" + self.defaults = {"font": None, "bgColor": None, "fgColor": None, "borderColor": None, "bgCount": None, "dir": None} + + if self.oneConfigFile: + # don't need tintwizard.conf + return + + pathName = os.path.dirname(sys.argv[0]) + + if pathName != "": + pathName += "/" + + if not os.path.exists(pathName + "tintwizard.conf"): + self.writeConf() + return + + f = open(pathName + "tintwizard.conf", "r") + + for line in f: + if "=" in line: + l = line.split("=") + + if self.defaults.has_key(l[0].strip()): + self.defaults[l[0].strip()] = l[1].strip() + + def readTint2Config(self): + """Reads in from a config file.""" + f = open(self.filename, "r") + + string = "" + + for line in f: + if (line[0] != "#") and (len(line) > 2): + string += line + + f.close() + + # Deselect the optional stuff, and we'll re-check them if the config has them enabled + self.clockCheckButton.set_active(False) + self.clock1CheckButton.set_active(False) + self.clock2CheckButton.set_active(False) + self.trayShow.set_active(False) + self.taskbarActiveBgEnable.set_active(False) + + # Remove all background styles so we can create new ones as we read them + for i in range(len(self.bgs)): + self.delBgClick(None, False) + + # As we parse background definitions, we build a new string + # without the background related stuff. This means we don't + # have to read through background defs AGAIN when parsing + # the other stuff. + noBgDefs = self.parseBgs(string) + + self.parseConfig(noBgDefs) + + def save(self, widget=None, event=None): + """Saves the generated config file.""" + + # This function returns the boolean status of whether or not the + # file saved, so that the apply() function knows if it should + # kill the tint2 process and apply the new config. + + # If no file has been selected, force the user to "Save As..." + if self.filename == None: + return self.saveAs() + else: + self.generateConfig() + self.writeFile() + + return True + + def saveAs(self, widget=None, event=None): + """Prompts the user to select a file and then saves the generated config file.""" + self.generateConfig() + + chooser = gtk.FileChooserDialog("Save Config File As...", self, gtk.FILE_CHOOSER_ACTION_SAVE, (gtk.STOCK_CANCEL, gtk.RESPONSE_CANCEL, gtk.STOCK_SAVE, gtk.RESPONSE_OK)) + chooser.set_default_response(gtk.RESPONSE_OK) + + if self.curDir != None: + chooser.set_current_folder(self.curDir) + + chooserFilter = gtk.FileFilter() + chooserFilter.set_name("All files") + chooserFilter.add_pattern("*") + chooser.add_filter(chooserFilter) + chooser.show() + + response = chooser.run() + + if response == gtk.RESPONSE_OK: + self.filename = chooser.get_filename() + + if os.path.exists(self.filename): + overwrite = confirmDialog(self, "This file already exists. Overwrite this file?") + + if overwrite == gtk.RESPONSE_YES: + self.writeFile() + chooser.destroy() + return True + else: + self.filename = None + chooser.destroy() + return False + else: + self.writeFile() + chooser.destroy() + return True + else: + self.filename = None + chooser.destroy() + return False + + def saveAsDef(self, widget=None, event=None): + """Saves the config as the default tint2 config.""" + if confirmDialog(self, "Overwrite current tint2 default config?") == gtk.RESPONSE_YES: + self.filename = os.path.expandvars("${HOME}") + "/.config/tint2/tint2rc" + self.curDir = os.path.expandvars("${HOME}") + "/.config/tint2" + + # If, for whatever reason, tint2 has no default config - create one. + if not os.path.isfile(self.filename): + f = open(self.filename, "w") + f.write("# tint2rc") + f.close() + + self.generateConfig() + self.writeFile() + + return True + + def savePrompt(self): + """Prompt the user to save before creating a new file.""" + if confirmDialog(self, "Save current config?") == gtk.RESPONSE_YES: + self.save(None) + + def switchPage(self, notebook, page, page_num): + """Handles notebook page switch events.""" + + # If user selects the 'View Config' tab, update the textarea within this tab. + if notebook.get_tab_label_text(notebook.get_nth_page(page_num)) == "View Config": + self.generateConfig() + + def updateComboBoxes(self, i, action="add"): + """Updates the contents of a combo box when a background style has been added/removed.""" + cbs = [self.batteryBg, self.clockBg, self.taskbarBg, self.taskbarActiveBg, self.trayBg, self.taskActiveBg, self.taskBg, self.panelBg, self.tooltipBg] + + if action == "add": + for cb in cbs: + cb.append_text(str(i+1)) + else: + for cb in cbs: + if cb.get_active() == i: # If background is selected, set to a different value + cb.set_active(0) + + cb.remove_text(i) + + def updateStatusBar(self, message="", change=False): + """Updates the message on the statusbar. A message can be provided, + and if change is set to True (i.e. something has been modified) then + an appropriate symbol [*] is shown beside filename.""" + contextID = self.statusBar.get_context_id("") + + self.statusBar.pop(contextID) + + if not message: + message = "%s %s" % (self.filename or "New Config File", "[*]" if change else "") + + self.statusBar.push(contextID, message) + + def writeConf(self): + """Writes the tintwizard configuration file.""" + confStr = "#Start\n[defaults]\n" + + for key in self.defaults: + confStr += "%s = %s\n" % (key, str(self.defaults[key])) + + confStr += "#End\n" + + pathName = os.path.dirname(sys.argv[0]) + + if pathName == "": + f = open("tintwizard.conf", "w") + else: + f = open(pathName+"/tintwizard.conf", "w") + + f.write(confStr) + + f.close() + + def writeFile(self): + """Writes the contents of the config text buffer to file.""" + try: + f = open(self.filename, "w") + + f.write(self.configBuf.get_text(self.configBuf.get_start_iter(), self.configBuf.get_end_iter())) + + f.close() + + self.toSave = False + + self.curDir = os.path.dirname(self.filename) + + self.updateStatusBar() + except IOError: + errorDialog(self, "Could not save file") + +# General use functions +def confirmDialog(parent, message): + """Creates a confirmation dialog and returns the response.""" + dialog = gtk.MessageDialog(parent, gtk.DIALOG_MODAL, gtk.MESSAGE_QUESTION, gtk.BUTTONS_YES_NO, message) + dialog.show() + response = dialog.run() + dialog.destroy() + return response + +def errorDialog(parent=None, message="An error has occured!"): + """Creates an error dialog.""" + dialog = gtk.MessageDialog(parent, gtk.DIALOG_MODAL, gtk.MESSAGE_ERROR, gtk.BUTTONS_OK, message) + dialog.show() + dialog.run() + dialog.destroy() + +def numToHex(n): + """Convert integer n in range [0, 15] to hex.""" + try: + return ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "A", "B", "C", "D", "E", "F"][n] + except: + return -1 + +def rgbToHex(r, g, b): + """Constructs a 6 digit hex representation of color (r, g, b).""" + r2 = trunc(r / 65535.0 * 255) + g2 = trunc(g / 65535.0 * 255) + b2 = trunc(b / 65535.0 * 255) + + return "#%s%s%s%s%s%s" % (numToHex(r2 / 16), numToHex(r2 % 16), numToHex(g2 / 16), numToHex(g2 % 16), numToHex(b2 / 16), numToHex(b2 % 16)) + +def trunc(n): + """Truncate a floating point number, rounding up or down appropriately.""" + c = math.fabs(math.ceil(n) - n) + f = math.fabs(math.floor(n) - n) + + if c < f: + return int(math.ceil(n)) + else: + return int(math.floor(n)) + +# Direct execution of application +if __name__ == "__main__": + tw = TintWizardGUI() + tw.main() diff -Nru tint2-0.7.1/src/tint.c tint2-0.9/src/tint.c --- tint2-0.7.1/src/tint.c 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/tint.c 2010-01-18 21:11:05.000000000 +0000 @@ -19,17 +19,19 @@ **************************************************************************/ #include -#include #include #include #include +#include #include #include #include #include +#include #include #include +#include "version.h" #include "server.h" #include "window.h" #include "config.h" @@ -37,7 +39,8 @@ #include "taskbar.h" #include "systraybar.h" #include "panel.h" - +#include "tooltip.h" +#include "timer.h" void signal_handler(int sig) { @@ -46,622 +49,725 @@ } -void init () +void init (int argc, char *argv[]) { + int i; + + // read options + for (i = 1; i < argc; ++i) { + if (!strcmp(argv[i], "-h") || !strcmp(argv[i], "--help")) { + printf("Usage: tint2 [-c] \n"); + exit(0); + } + if (!strcmp(argv[i], "-v") || !strcmp(argv[i], "--version")) { + printf("tint2 version %s\n", VERSION_STRING); + exit(0); + } + if (!strcmp(argv[i], "-c")) { + i++; + if (i < argc) + config_path = strdup(argv[i]); + } + if (!strcmp(argv[i], "-s")) { + i++; + if (i < argc) + snapshot_path = strdup(argv[i]); + } + } // Set signal handler - signal(SIGUSR1, signal_handler); - signal(SIGINT, signal_handler); - signal(SIGTERM, signal_handler); - signal(SIGHUP, signal_handler); - signal(SIGCLD, SIG_IGN); // don't have to wait() after fork() - - // set global data - memset(&server, 0, sizeof(Server_global)); - memset(&systray, 0, sizeof(Systraybar)); - - server.dsp = XOpenDisplay (NULL); - if (!server.dsp) { - fprintf(stderr, "tint2 exit : could not open display.\n"); - exit(0); - } - server_init_atoms (); - server.screen = DefaultScreen (server.dsp); + struct sigaction sa = { .sa_handler = signal_handler }; + sigaction(SIGUSR1, &sa, 0); + sigaction(SIGINT, &sa, 0); + sigaction(SIGTERM, &sa, 0); + sigaction(SIGHUP, &sa, 0); + signal(SIGCHLD, SIG_IGN); // don't have to wait() after fork() + + // BSD is too stupid to support pselect(), therefore we have to use select and hope that we do not + // end up in a race condition there + // block all signals, such that no race conditions occur before pselect in our main loop +// sigset_t block_mask; +// sigaddset(&block_mask, SIGINT); +// sigaddset(&block_mask, SIGTERM); +// sigaddset(&block_mask, SIGHUP); +// sigaddset(&block_mask, SIGUSR1); +// sigprocmask(SIG_BLOCK, &block_mask, 0); + + // set global data + memset(&server, 0, sizeof(Server_global)); + memset(&systray, 0, sizeof(Systraybar)); +} + +void init_X11() +{ + server.dsp = XOpenDisplay (NULL); + if (!server.dsp) { + fprintf(stderr, "tint2 exit : could not open display.\n"); + exit(0); + } + server_init_atoms (); + server.screen = DefaultScreen (server.dsp); server.root_win = RootWindow(server.dsp, server.screen); - server.depth = DefaultDepth (server.dsp, server.screen); - server.visual = DefaultVisual (server.dsp, server.screen); - server.desktop = server_get_current_desktop (); - XGCValues gcv; - server.gc = XCreateGC (server.dsp, server.root_win, (unsigned long)0, &gcv) ; - - XSetErrorHandler ((XErrorHandler) server_catch_error); - - imlib_context_set_display (server.dsp); - imlib_context_set_visual (server.visual); - imlib_context_set_colormap (DefaultColormap (server.dsp, server.screen)); - - /* Catch events */ - XSelectInput (server.dsp, server.root_win, PropertyChangeMask|StructureNotifyMask); + server.desktop = server_get_current_desktop (); + server_init_visual(); + XSetErrorHandler ((XErrorHandler) server_catch_error); + + imlib_context_set_display (server.dsp); + imlib_context_set_visual (server.visual); + imlib_context_set_colormap (server.colormap); + + /* Catch events */ + XSelectInput (server.dsp, server.root_win, PropertyChangeMask|StructureNotifyMask); + + setlocale (LC_ALL, ""); + + // load default icon + gchar *path; + const gchar * const *data_dirs; + data_dirs = g_get_system_data_dirs (); + int i; + for (i = 0; data_dirs[i] != NULL; i++) { + path = g_build_filename(data_dirs[i], "tint2", "default_icon.png", NULL); + if (g_file_test (path, G_FILE_TEST_EXISTS)) + default_icon = imlib_load_image(path); + g_free(path); + } - setlocale (LC_ALL, ""); + // get monitor and desktop config + get_monitors(); + get_desktops(); } void cleanup() { + stop_all_timeouts(); + cleanup_systray(); + stop_net(); cleanup_panel(); - - if (time1_font_desc) pango_font_description_free(time1_font_desc); - if (time2_font_desc) pango_font_description_free(time2_font_desc); - if (time1_format) g_free(time1_format); - if (time2_format) g_free(time2_format); + cleanup_tooltip(); + cleanup_clock(); #ifdef ENABLE_BATTERY - if (bat1_font_desc) pango_font_description_free(bat1_font_desc); - if (bat2_font_desc) pango_font_description_free(bat2_font_desc); - if (battery_low_cmd) g_free(battery_low_cmd); - if (path_energy_now) g_free(path_energy_now); - if (path_energy_full) g_free(path_energy_full); - if (path_current_now) g_free(path_current_now); - if (path_status) g_free(path_status); + cleanup_battery(); #endif - if (clock_lclick_command) g_free(clock_lclick_command); - if (clock_rclick_command) g_free(clock_rclick_command); - if (server.monitor) free(server.monitor); - XFreeGC(server.dsp, server.gc); - XCloseDisplay(server.dsp); + if (default_icon) { + imlib_context_set_image(default_icon); + imlib_free_image(); + } + if (config_path) g_free(config_path); + if (snapshot_path) g_free(snapshot_path); + + cleanup_server(); + if (server.dsp) XCloseDisplay(server.dsp); +} + + +void get_snapshot(const char *path) +{ + Panel *panel = &panel1[0]; + + if (panel->temp_pmap) XFreePixmap(server.dsp, panel->temp_pmap); + panel->temp_pmap = XCreatePixmap(server.dsp, server.root_win, panel->area.width, panel->area.height, server.depth); + + refresh(&panel->area); + + Imlib_Image img = NULL; + imlib_context_set_drawable(panel->temp_pmap); + img = imlib_create_image_from_drawable(0, 0, 0, panel->area.width, panel->area.height, 0); + + imlib_context_set_image(img); + imlib_save_image(path); + imlib_free_image(); } void window_action (Task *tsk, int action) { - switch (action) { - case CLOSE: - set_close (tsk->win); - break; - case TOGGLE: - set_active(tsk->win); - break; - case ICONIFY: - XIconifyWindow (server.dsp, tsk->win, server.screen); - break; - case TOGGLE_ICONIFY: - if (tsk == task_active) XIconifyWindow (server.dsp, tsk->win, server.screen); - else set_active (tsk->win); - break; - case SHADE: - window_toggle_shade (tsk->win); - break; - } + if (!tsk) return; + int desk; + switch (action) { + case CLOSE: + set_close (tsk->win); + break; + case TOGGLE: + set_active(tsk->win); + break; + case ICONIFY: + XIconifyWindow (server.dsp, tsk->win, server.screen); + break; + case TOGGLE_ICONIFY: + if (task_active && tsk->win == task_active->win) + XIconifyWindow (server.dsp, tsk->win, server.screen); + else + set_active (tsk->win); + break; + case SHADE: + window_toggle_shade (tsk->win); + break; + case MAXIMIZE_RESTORE: + window_maximize_restore (tsk->win); + break; + case MAXIMIZE: + window_maximize_restore (tsk->win); + break; + case RESTORE: + window_maximize_restore (tsk->win); + break; + case DESKTOP_LEFT: + if ( tsk->desktop == 0 ) break; + desk = tsk->desktop - 1; + windows_set_desktop(tsk->win, desk); + if (desk == server.desktop) + set_active(tsk->win); + break; + case DESKTOP_RIGHT: + if (tsk->desktop == server.nb_desktop ) break; + desk = tsk->desktop + 1; + windows_set_desktop(tsk->win, desk); + if (desk == server.desktop) + set_active(tsk->win); + break; + case NEXT_TASK: + if (task_active) { + Task *tsk1; + tsk1 = next_task(task_active); + set_active(tsk1->win); + } + break; + case PREV_TASK: + if (task_active) { + Task *tsk1; + tsk1 = prev_task(task_active); + set_active(tsk1->win); + } + } +} + + +int tint2_handles_click(Panel* panel, XButtonEvent* e) +{ + Task* task = click_task(panel, e->x, e->y); + if (task) { + if( (e->button == 1) + || (e->button == 2 && mouse_middle != 0) + || (e->button == 3 && mouse_right != 0) + || (e->button == 4 && mouse_scroll_up != 0) + || (e->button == 5 && mouse_scroll_down !=0) ) + { + return 1; + } + else + return 0; + } + // no task clicked --> check if taskbar clicked + Taskbar *tskbar = click_taskbar(panel, e->x, e->y); + if (tskbar && e->button == 1 && panel_mode == MULTI_DESKTOP) + return 1; + if (click_clock(panel, e->x, e->y)) { + if ( (e->button == 1 && clock_lclick_command) || (e->button == 3 && clock_rclick_command) ) + return 1; + else + return 0; + } + return 0; +} + + +void forward_click(XEvent* e) +{ + // forward the click to the desktop window (thanks conky) + XUngrabPointer(server.dsp, e->xbutton.time); + e->xbutton.window = server.root_win; + // icewm doesn't open under the mouse. + // and xfce doesn't open at all. + e->xbutton.x = e->xbutton.x_root; + e->xbutton.y = e->xbutton.y_root; + //printf("**** %d, %d\n", e->xbutton.x, e->xbutton.y); + //XSetInputFocus(server.dsp, e->xbutton.window, RevertToParent, e->xbutton.time); + XSendEvent(server.dsp, e->xbutton.window, False, ButtonPressMask, e); } void event_button_press (XEvent *e) { - Panel *panel = get_panel(e->xany.window); + Panel *panel = get_panel(e->xany.window); if (!panel) return; - if (wm_menu) { - if ((panel_horizontal && (e->xbutton.x < panel->area.paddingxlr || e->xbutton.x > panel->area.width-panel->area.paddingxlr || e->xbutton.y < panel->area.paddingy || e->xbutton.y > panel->area.paddingy+panel->g_taskbar.height)) || (!panel_horizontal && (e->xbutton.y < panel->area.paddingxlr || e->xbutton.y > panel->area.height-panel->area.paddingxlr || e->xbutton.x < panel->area.paddingy || e->xbutton.x > panel->area.paddingy+panel->g_taskbar.width))) { - // forward the click to the desktop window (thanks conky) - XUngrabPointer(server.dsp, e->xbutton.time); - e->xbutton.window = server.root_win; - // icewm doesn't open under the mouse. - // and xfce doesn't open at all. - //e->xbutton.x = e->xbutton.x_root; - //e->xbutton.y = e->xbutton.y_root; - //printf("**** %d, %d\n", e->xbutton.x, e->xbutton.y); - XSetInputFocus(server.dsp, e->xbutton.window, RevertToParent, e->xbutton.time); - XSendEvent(server.dsp, e->xbutton.window, False, ButtonPressMask, e); - return; - } - } - - if (e->xbutton.button != 1) return; - if (panel_mode != MULTI_DESKTOP) { - // drag and drop disabled - XLowerWindow (server.dsp, panel->main_win); - return; - } - - GSList *l0; - Taskbar *tskbar; - if (panel_horizontal) { - int x = e->xbutton.x; - for (l0 = panel->area.list; l0 ; l0 = l0->next) { - tskbar = l0->data; - if (!tskbar->area.on_screen) continue; - if (x >= tskbar->area.posx && x <= (tskbar->area.posx + tskbar->area.width)) - break; - } - if (l0) { - Task *tsk; - for (l0 = tskbar->area.list; l0 ; l0 = l0->next) { - tsk = l0->data; - if (x >= tsk->area.posx && x <= (tsk->area.posx + tsk->area.width)) { - task_drag = tsk; - break; - } - } - } - } - else { - int y = e->xbutton.y; - for (l0 = panel->area.list; l0 ; l0 = l0->next) { - tskbar = l0->data; - if (!tskbar->area.on_screen) continue; - if (y >= tskbar->area.posy && y <= (tskbar->area.posy + tskbar->area.height)) - break; - } - if (l0) { - Task *tsk; - for (l0 = tskbar->area.list; l0 ; l0 = l0->next) { - tsk = l0->data; - if (y >= tsk->area.posy && y <= (tsk->area.posy + tsk->area.height)) { - task_drag = tsk; - break; - } - } - } + if (wm_menu && !tint2_handles_click(panel, &e->xbutton) ) { + forward_click(e); + return; } + task_drag = click_task(panel, e->xbutton.x, e->xbutton.y); - XLowerWindow (server.dsp, panel->main_win); + XLowerWindow (server.dsp, panel->main_win); } void event_button_release (XEvent *e) { - Panel *panel = get_panel(e->xany.window); + Panel *panel = get_panel(e->xany.window); if (!panel) return; - if (wm_menu) { - if ((panel_horizontal && (e->xbutton.x < panel->area.paddingxlr || e->xbutton.x > panel->area.width-panel->area.paddingxlr || e->xbutton.y < panel->area.paddingy || e->xbutton.y > panel->area.paddingy+panel->g_taskbar.height)) || (!panel_horizontal && (e->xbutton.y < panel->area.paddingxlr || e->xbutton.y > panel->area.height-panel->area.paddingxlr || e->xbutton.x < panel->area.paddingy || e->xbutton.x > panel->area.paddingy+panel->g_taskbar.width))) { - // forward the click to the desktop window (thanks conky) - e->xbutton.window = server.root_win; - XSendEvent(server.dsp, e->xbutton.window, False, ButtonReleaseMask, e); + if (wm_menu && !tint2_handles_click(panel, &e->xbutton)) { + forward_click(e); + XLowerWindow (server.dsp, panel->main_win); + task_drag = 0; + return; + } + + int action = TOGGLE_ICONIFY; + switch (e->xbutton.button) { + case 2: + action = mouse_middle; + break; + case 3: + action = mouse_right; + break; + case 4: + action = mouse_scroll_up; + break; + case 5: + action = mouse_scroll_down; + break; + case 6: + action = mouse_tilt_left; + break; + case 7: + action = mouse_tilt_right; + break; + } + + if ( click_clock(panel, e->xbutton.x, e->xbutton.y)) { + clock_action(e->xbutton.button); + XLowerWindow (server.dsp, panel->main_win); + task_drag = 0; + return; + } + + Taskbar *tskbar; + if ( !(tskbar = click_taskbar(panel, e->xbutton.x, e->xbutton.y)) ) { + // TODO: check better solution to keep window below + XLowerWindow (server.dsp, panel->main_win); + task_drag = 0; + return; + } + + // drag and drop task + if (task_drag) { + if (tskbar != task_drag->area.parent && action == TOGGLE_ICONIFY) { + if (task_drag->desktop != ALLDESKTOP && panel_mode == MULTI_DESKTOP) { + windows_set_desktop(task_drag->win, tskbar->desktop); + if (tskbar->desktop == server.desktop) + set_active(task_drag->win); + task_drag = 0; + } return; } + else task_drag = 0; } - int action = TOGGLE_ICONIFY; - int x = e->xbutton.x; - int y = e->xbutton.y; - switch (e->xbutton.button) { - case 2: - action = mouse_middle; - break; - case 3: - action = mouse_right; - break; - case 4: - action = mouse_scroll_up; - break; - case 5: - action = mouse_scroll_down; - break; - } - - // search taskbar - Taskbar *tskbar; - GSList *l0; - Clock clk = panel->clock; - if (panel_horizontal) { - if (clk.area.on_screen && x >= clk.area.posx && x <= (clk.area.posx + clk.area.width)) - clock_action(e->xbutton.button); - else { - for (l0 = panel->area.list; l0 ; l0 = l0->next) { - tskbar = l0->data; - if (!tskbar->area.on_screen) continue; - if (x >= tskbar->area.posx && x <= (tskbar->area.posx + tskbar->area.width)) - goto suite; - } - } - } - else { - if (clk.area.on_screen && y >= clk.area.posy && y <= (clk.area.posy + clk.area.height)) - clock_action(e->xbutton.button); - else { - for (l0 = panel->area.list; l0 ; l0 = l0->next) { - tskbar = l0->data; - if (!tskbar->area.on_screen) continue; - if (y >= tskbar->area.posy && y <= (tskbar->area.posy + tskbar->area.height)) - goto suite; - } - } + // switch desktop + if (panel_mode == MULTI_DESKTOP) { + if (tskbar->desktop != server.desktop && action != CLOSE && action != DESKTOP_LEFT && action != DESKTOP_RIGHT) + set_desktop (tskbar->desktop); } - // TODO: check better solution to keep window below - XLowerWindow (server.dsp, panel->main_win); - task_drag = 0; - return; - -suite: - // drag and drop task - if (task_drag) { - if (tskbar != task_drag->area.parent && action == TOGGLE_ICONIFY) { - if (task_drag->desktop != ALLDESKTOP && panel_mode == MULTI_DESKTOP) { - windows_set_desktop(task_drag->win, tskbar->desktop); - if (tskbar->desktop == server.desktop) - set_active(task_drag->win); - task_drag = 0; - } - return; - } - else task_drag = 0; - } - - // switch desktop - if (panel_mode == MULTI_DESKTOP) { - if (tskbar->desktop != server.desktop && action != CLOSE) - set_desktop (tskbar->desktop); - } - - // action on task - Task *tsk; - GSList *l; - for (l = tskbar->area.list ; l ; l = l->next) { - tsk = l->data; - if (panel_horizontal) { - if (x >= tsk->area.posx && x <= (tsk->area.posx + tsk->area.width)) { - window_action (tsk, action); - break; - } - } - else { - if (y >= tsk->area.posy && y <= (tsk->area.posy + tsk->area.height)) { - window_action (tsk, action); - break; - } - } - } + // action on task + window_action( click_task(panel, e->xbutton.x, e->xbutton.y), action); - // to keep window below - XLowerWindow (server.dsp, panel->main_win); + // to keep window below + XLowerWindow (server.dsp, panel->main_win); } void event_property_notify (XEvent *e) { - int i, j; - Task *tsk; - Window win = e->xproperty.window; - Atom at = e->xproperty.atom; - - if (win == server.root_win) { - if (!server.got_root_win) { - XSelectInput (server.dsp, server.root_win, PropertyChangeMask|StructureNotifyMask); - server.got_root_win = 1; - } - - // Change number of desktops - else if (at == server.atom._NET_NUMBER_OF_DESKTOPS) { - server.nb_desktop = server_get_number_of_desktop (); - cleanup_taskbar(); + int i; + Task *tsk; + Window win = e->xproperty.window; + Atom at = e->xproperty.atom; + + if (win == server.root_win) { + if (!server.got_root_win) { + XSelectInput (server.dsp, server.root_win, PropertyChangeMask|StructureNotifyMask); + server.got_root_win = 1; + } + + // Change number of desktops + else if (at == server.atom._NET_NUMBER_OF_DESKTOPS) { + server.nb_desktop = server_get_number_of_desktop (); + cleanup_taskbar(); init_taskbar(); visible_object(); for (i=0 ; i < nb_panel ; i++) { panel1[i].area.resize = 1; } task_refresh_tasklist(); + active_task(); panel_refresh = 1; - } - // Change desktop - else if (at == server.atom._NET_CURRENT_DESKTOP) { - server.desktop = server_get_current_desktop (); - if (panel_mode != MULTI_DESKTOP) { - visible_object(); - } - } - // Window list - else if (at == server.atom._NET_CLIENT_LIST) { - task_refresh_tasklist(); - panel_refresh = 1; - } - // Change active - else if (at == server.atom._NET_ACTIVE_WINDOW) { - GSList *l0; - if (task_active) { - for (i=0 ; i < nb_panel ; i++) { - for (j=0 ; j < panel1[i].nb_desktop ; j++) { - for (l0 = panel1[i].taskbar[j].area.list; l0 ; l0 = l0->next) { - tsk = l0->data; - tsk->area.is_active = 0; - } + } + // Change desktop + else if (at == server.atom._NET_CURRENT_DESKTOP) { + int old_desktop = server.desktop; + server.desktop = server_get_current_desktop (); + for (i=0 ; i < nb_panel ; i++) { + Panel *panel = &panel1[i]; + if (panel_mode == MULTI_DESKTOP && panel->g_taskbar.use_active) { + // redraw both taskbar + if (server.nb_desktop > old_desktop) { + // can happen if last desktop is deleted and we've been on the last desktop + panel->taskbar[old_desktop].area.bg = panel->g_taskbar.bg; + panel->taskbar[old_desktop].area.resize = 1; } + panel->taskbar[server.desktop].area.bg = panel->g_taskbar.bg_active; + panel->taskbar[server.desktop].area.resize = 1; + panel_refresh = 1; } - task_active = 0; - } - Window w1 = window_get_active (); - Task *t = task_get_task(w1); - if (!t) { - Window w2; - if (XGetTransientForHint(server.dsp, w1, &w2) != 0) - if (w2) t = task_get_task(w2); - } - if (task_urgent == t) { - init_precision(); - task_urgent = 0; - } - if (t) { - for (i=0 ; i < nb_panel ; i++) { - for (j=0 ; j < panel1[i].nb_desktop ; j++) { - for (l0 = panel1[i].taskbar[j].area.list; l0 ; l0 = l0->next) { - tsk = l0->data; - if (tsk->win == t->win) { - tsk->area.is_active = 1; - //printf("active monitor %d, task %s\n", panel1[i].monitor, tsk->title); - } - } + // check ALLDESKTOP task => resize taskbar + Taskbar *tskbar; + Task *tsk; + GSList *l; + if (server.nb_desktop > old_desktop) { + tskbar = &panel->taskbar[old_desktop]; + for (l = tskbar->area.list; l ; l = l->next) { + tsk = l->data; + if (tsk->desktop == ALLDESKTOP) { + tsk->area.on_screen = 0; + tskbar->area.resize = 1; + panel_refresh = 1; + } } } - task_active = t; + tskbar = &panel->taskbar[server.desktop]; + for (l = tskbar->area.list; l ; l = l->next) { + tsk = l->data; + if (tsk->desktop == ALLDESKTOP) { + tsk->area.on_screen = 1; + tskbar->area.resize = 1; + } + } + } + if (panel_mode != MULTI_DESKTOP) { + visible_object(); } - panel_refresh = 1; - } - else if (at == server.atom._XROOTPMAP_ID) { + } + // Window list + else if (at == server.atom._NET_CLIENT_LIST) { + task_refresh_tasklist(); + panel_refresh = 1; + } + // Change active + else if (at == server.atom._NET_ACTIVE_WINDOW) { + active_task(); + panel_refresh = 1; + } + else if (at == server.atom._XROOTPMAP_ID) { // change Wallpaper for (i=0 ; i < nb_panel ; i++) { set_panel_background(&panel1[i]); } - panel_refresh = 1; - } - } - else { - tsk = task_get_task (win); - if (!tsk) return; - //printf("atom root_win = %s, %s\n", XGetAtomName(server.dsp, at), tsk->title); - - // Window title changed - if (at == server.atom._NET_WM_VISIBLE_NAME || at == server.atom._NET_WM_NAME || at == server.atom.WM_NAME) { - Task *tsk2; - GSList *l0; - get_title(tsk); - // changed other tsk->title - for (i=0 ; i < nb_panel ; i++) { - for (j=0 ; j < panel1[i].nb_desktop ; j++) { - for (l0 = panel1[i].taskbar[j].area.list; l0 ; l0 = l0->next) { - tsk2 = l0->data; - if (tsk->win == tsk2->win && tsk != tsk2) { - tsk2->title = tsk->title; - tsk2->area.redraw = 1; - } - } + panel_refresh = 1; + } + } + else { + tsk = task_get_task (win); + if (!tsk) { + if (at != server.atom._NET_WM_STATE) + return; + else { + // xfce4 sends _NET_WM_STATE after minimized to tray, so we need to check if window is mapped + // if it is mapped and not set as skip_taskbar, we must add it to our task list + XWindowAttributes wa; + XGetWindowAttributes(server.dsp, win, &wa); + if (wa.map_state == IsViewable && !window_is_skip_taskbar(win)) { + if ( (tsk = add_task(win)) ) + panel_refresh = 1; + else + return; } + else + return; } - panel_refresh = 1; - } - // Demand attention - else if (at == server.atom._NET_WM_STATE) { - if (window_is_urgent (win)) { - task_urgent = tsk; - tick_urgent = 0; - time_precision = 1; - } - } - else if (at == server.atom.WM_STATE) { - // Iconic state - // TODO : try to delete following code - if (window_is_iconified (win)) { - if (task_active) { - if (task_active->win == tsk->win) { - Task *tsk2; - GSList *l0; - for (i=0 ; i < nb_panel ; i++) { - for (j=0 ; j < panel1[i].nb_desktop ; j++) { - for (l0 = panel1[i].taskbar[j].area.list; l0 ; l0 = l0->next) { - tsk2 = l0->data; - tsk2->area.is_active = 0; - } - } - } - task_active = 0; - } - } + } + //printf("atom root_win = %s, %s\n", XGetAtomName(server.dsp, at), tsk->title); + + // Window title changed + if (at == server.atom._NET_WM_VISIBLE_NAME || at == server.atom._NET_WM_NAME || at == server.atom.WM_NAME) { + get_title(tsk); + if (g_tooltip.mapped && (g_tooltip.area == (Area*)tsk)) { + tooltip_copy_text((Area*)tsk); + tooltip_update(); } + panel_refresh = 1; } - // Window icon changed - else if (at == server.atom._NET_WM_ICON) { - get_icon(tsk); - Task *tsk2; - GSList *l0; - for (i=0 ; i < nb_panel ; i++) { - for (j=0 ; j < panel1[i].nb_desktop ; j++) { - for (l0 = panel1[i].taskbar[j].area.list; l0 ; l0 = l0->next) { - tsk2 = l0->data; - if (tsk->win == tsk2->win && tsk != tsk2) { - tsk2->icon_width = tsk->icon_width; - tsk2->icon_height = tsk->icon_height; - tsk2->icon_data = tsk->icon_data; - tsk2->area.redraw = 1; - } - } - } + // Demand attention + else if (at == server.atom._NET_WM_STATE) { + if (window_is_urgent (win)) { + add_urgent(tsk); + } + if (window_is_skip_taskbar(win)) { + remove_task( tsk ); + panel_refresh = 1; } - panel_refresh = 1; - } - // Window desktop changed - else if (at == server.atom._NET_WM_DESKTOP) { + } + else if (at == server.atom.WM_STATE) { + // Iconic state + int state = (task_active && tsk->win == task_active->win ? TASK_ACTIVE : TASK_NORMAL); + if (window_is_iconified(win)) + state = TASK_ICONIFIED; + set_task_state(tsk, state); + panel_refresh = 1; + } + // Window icon changed + else if (at == server.atom._NET_WM_ICON) { + get_icon(tsk); + panel_refresh = 1; + } + // Window desktop changed + else if (at == server.atom._NET_WM_DESKTOP) { int desktop = window_get_desktop (win); - int active = tsk->area.is_active; //printf(" Window desktop changed %d, %d\n", tsk->desktop, desktop); // bug in windowmaker : send unecessary 'desktop changed' when focus changed if (desktop != tsk->desktop) { remove_task (tsk); tsk = add_task (win); - if (tsk && active) { - tsk->area.is_active = 1; - task_active = tsk; - } + active_task(); panel_refresh = 1; } - } + } + else if (at == server.atom.WM_HINTS) { + XWMHints* wmhints = XGetWMHints(server.dsp, win); + if (wmhints && wmhints->flags & XUrgencyHint) { + add_urgent(tsk); + } + XFree(wmhints); + } - if (!server.got_root_win) server.root_win = RootWindow (server.dsp, server.screen); - } + if (!server.got_root_win) server.root_win = RootWindow (server.dsp, server.screen); + } } void event_expose (XEvent *e) { - Panel *panel; - + Panel *panel; panel = get_panel(e->xany.window); if (!panel) return; // TODO : one panel_refresh per panel ? - panel_refresh = 1; + panel_refresh = 1; } void event_configure_notify (Window win) { - // check 'win' move in systray + // change in root window (xrandr) + if (win == server.root_win) { + get_monitors(); + init_config(); + config_read_file (config_path); + init_panel(); + cleanup_config(); + return; + } + + // 'win' is a trayer icon TrayWindow *traywin; GSList *l; for (l = systray.list_icons; l ; l = l->next) { traywin = (TrayWindow*)l->data; - if (traywin->id == win) { + if (traywin->tray_id == win) { //printf("move tray %d\n", traywin->x); XMoveResizeWindow(server.dsp, traywin->id, traywin->x, traywin->y, traywin->width, traywin->height); - panel_refresh = 1; + XResizeWindow(server.dsp, traywin->tray_id, traywin->width, traywin->height); + panel_refresh = 1; return; } } - // check 'win' move in another monitor - if (nb_panel == 1) return; - if (server.nb_monitor == 1) return; - Task *tsk = task_get_task (win); - if (!tsk) return; - - Panel *p = tsk->area.panel; - if (p->monitor != window_get_monitor (win)) { - remove_task (tsk); - add_task (win); - if (win == window_get_active ()) { - Task *tsk = task_get_task (win); - tsk->area.is_active = 1; + // 'win' move in another monitor + if (nb_panel == 1) return; + Task *tsk = task_get_task (win); + if (!tsk) return; + + Panel *p = tsk->area.panel; + if (p->monitor != window_get_monitor (win)) { + remove_task (tsk); + tsk = add_task (win); + if (win == window_get_active ()) { + set_task_state(tsk, TASK_ACTIVE); task_active = tsk; } - panel_refresh = 1; - } + panel_refresh = 1; + } } -void event_timer() +void dnd_message(XClientMessageEvent *e) { - struct timeval stv; - int i; + Panel *panel = get_panel(e->window); + int x, y, mapX, mapY; + Window child; + x = (e->data.l[2] >> 16) & 0xFFFF; + y = e->data.l[2] & 0xFFFF; + XTranslateCoordinates(server.dsp, server.root_win, e->window, x, y, &mapX, &mapY, &child); + Task* task = click_task(panel, mapX, mapY); + if (task) { + if (task->desktop != server.desktop ) + set_desktop (task->desktop); + window_action(task, TOGGLE); + } + + // send XdndStatus event to get more XdndPosition events + XClientMessageEvent se; + se.type = ClientMessage; + se.window = e->data.l[0]; + se.message_type = server.atom.XdndStatus; + se.format = 32; + se.data.l[0] = e->window; // XID of the target window + se.data.l[1] = 0; // bit 0: accept drop bit 1: send XdndPosition events if inside rectangle + se.data.l[2] = 0; // Rectangle x,y for which no more XdndPosition events + se.data.l[3] = (1 << 16) | 1; // Rectangle w,h for which no more XdndPosition events + se.data.l[4] = None; // None = drop will not be accepted + XSendEvent(server.dsp, e->data.l[0], False, NoEventMask, (XEvent*)&se); +} - if (gettimeofday(&stv, 0)) return; - if (abs(stv.tv_sec - time_clock.tv_sec) < time_precision) return; - time_clock.tv_sec = stv.tv_sec; - time_clock.tv_sec -= time_clock.tv_sec % time_precision; +int main (int argc, char *argv[]) +{ + XEvent e; + XClientMessageEvent *ev; + fd_set fdset; + int x11_fd, i; + Panel *panel; + GSList *it; + struct timeval* timeout; + + init (argc, argv); + init_config(); + i = 0; + if (config_path) + i = config_read_file (config_path); + else + i = config_read (); + if (!i) { + fprintf(stderr, "usage: tint2 [-c] \n"); + cleanup(); + exit(1); + } + + init_X11(); + init_panel(); + cleanup_config(); + if (snapshot_path) { + get_snapshot(snapshot_path); + cleanup(); + exit(0); + } + + int damage_event, damage_error; + XDamageQueryExtension(server.dsp, &damage_event, &damage_error); + x11_fd = ConnectionNumber(server.dsp); + XSync(server.dsp, False); - // urgent task - if (task_urgent) { - if (tick_urgent < max_tick_urgent) { - task_urgent->area.is_active = !task_urgent->area.is_active; - task_urgent->area.redraw = 1; - tick_urgent++; +// sigset_t empty_mask; +// sigemptyset(&empty_mask); + + while (1) { + if (panel_refresh) { + panel_refresh = 0; + + for (i=0 ; i < nb_panel ; i++) { + panel = &panel1[i]; + + if (panel->is_hidden) { + XCopyArea(server.dsp, panel->hidden_pixmap, panel->main_win, server.gc, 0, 0, panel->hidden_width, panel->hidden_height, 0, 0); + XSetWindowBackgroundPixmap(server.dsp, panel->main_win, panel->hidden_pixmap); + } + else { + if (panel->temp_pmap) XFreePixmap(server.dsp, panel->temp_pmap); + panel->temp_pmap = XCreatePixmap(server.dsp, server.root_win, panel->area.width, panel->area.height, server.depth); + refresh(&panel->area); + XCopyArea(server.dsp, panel->temp_pmap, panel->main_win, server.gc, 0, 0, panel->area.width, panel->area.height, 0, 0); + } + } + XFlush (server.dsp); + + panel = (Panel*)systray.area.panel; + if (refresh_systray && !panel->is_hidden) { + refresh_systray = 0; + // tint2 doen't draw systray icons. it just redraw background. + XSetWindowBackgroundPixmap (server.dsp, panel->main_win, panel->temp_pmap); + // force icon's refresh + refresh_systray_icon(); + } } - } - // update battery -#ifdef ENABLE_BATTERY - if (panel1[0].battery.area.on_screen) { - update_battery(); - for (i=0 ; i < nb_panel ; i++) - panel1[i].battery.area.resize = 1; - } -#endif + // thanks to AngryLlama for the timer + // Create a File Description Set containing x11_fd + FD_ZERO (&fdset); + FD_SET (x11_fd, &fdset); + update_next_timeout(); + if (next_timeout.tv_sec >= 0 && next_timeout.tv_usec >= 0) + timeout = &next_timeout; + else + timeout = 0; + + // Wait for X Event or a Timer + if (select(x11_fd+1, &fdset, 0, 0, timeout) > 0) { + while (XPending (server.dsp)) { + XNextEvent(server.dsp, &e); + + panel = get_panel(e.xany.window); + if (panel && panel_autohide) { + if (e.type == EnterNotify) + autohide_trigger_show(panel); + else if (e.type == LeaveNotify) + autohide_trigger_hide(panel); + if (panel->is_hidden) + continue; // discard further processing of this event because the panel is not visible yet + } - // update clock - if (time1_format) { - for (i=0 ; i < nb_panel ; i++) - panel1[i].clock.area.resize = 1; - } - panel_refresh = 1; -} + switch (e.type) { + case ButtonPress: + tooltip_hide(0); + event_button_press (&e); + break; + case ButtonRelease: + event_button_release(&e); + break; -int main (int argc, char *argv[]) -{ - XEvent e; - fd_set fd; - int x11_fd, i, c; - struct timeval tv; - Panel *panel; - GSList *it; + case MotionNotify: { + if (!g_tooltip.enabled) break; + Panel* panel = get_panel(e.xmotion.window); + Area* area = click_area(panel, e.xmotion.x, e.xmotion.y); + if (area->_get_tooltip_text) + tooltip_trigger_show(area, panel, e.xmotion.x_root, e.xmotion.y_root); + else + tooltip_trigger_hide(); + break; + } + + case LeaveNotify: + if (g_tooltip.enabled) + tooltip_trigger_hide(); + break; - init (); + case Expose: + event_expose(&e); + break; -load_config: - i = 0; - c = getopt (argc, argv, "c:"); - init_config(); - if (c != -1) { - i = config_read_file (optarg); - c = getopt (argc, argv, "j:"); - if (c != -1) { - // usage: tint2 [-c] -j for internal use - printf("file %s\n", optarg); - cleanup(); - exit(0); - } - } - if (!i) - i = config_read (); - if (!i) { - fprintf(stderr, "usage: tint2 [-c] \n"); - cleanup(); - exit(1); - } - config_finish(); - - x11_fd = ConnectionNumber(server.dsp); - XSync(server.dsp, False); - - while (1) { - // thanks to AngryLlama for the timer - // Create a File Description Set containing x11_fd - FD_ZERO (&fd); - FD_SET (x11_fd, &fd); - - tv.tv_usec = 500000; - tv.tv_sec = 0; - - // Wait for X Event or a Timer - if (select(x11_fd+1, &fd, 0, 0, &tv)) { - while (XPending (server.dsp)) { - XNextEvent(server.dsp, &e); - - switch (e.type) { - case ButtonPress: - event_button_press (&e); - break; - - case ButtonRelease: - event_button_release(&e); - break; - - case Expose: - event_expose(&e); - break; - - case PropertyNotify: - event_property_notify(&e); - break; - - case ConfigureNotify: - if (e.xconfigure.window == server.root_win) - goto load_config; - else - event_configure_notify (e.xconfigure.window); - break; + case PropertyNotify: + event_property_notify(&e); + break; + + case ConfigureNotify: + event_configure_notify (e.xconfigure.window); + break; case ReparentNotify: - if (!systray.area.on_screen) + if (!systray_enabled) break; panel = (Panel*)systray.area.panel; if (e.xany.window == panel->main_win) // reparented to us @@ -670,10 +776,15 @@ break; case UnmapNotify: case DestroyNotify: - if (!systray.area.on_screen) + if (e.xany.window == server.composite_manager) { + // TODO: Stop real_transparency + //signal_pending = SIGUSR2; + break; + } + if (e.xany.window == g_tooltip.window || !systray.area.on_screen) break; for (it = systray.list_icons; it; it = g_slist_next(it)) { - if (((TrayWindow*)it->data)->id == e.xany.window) { + if (((TrayWindow*)it->data)->tray_id == e.xany.window) { remove_icon((TrayWindow*)it->data); break; } @@ -681,55 +792,62 @@ break; case ClientMessage: + ev = &e.xclient; + if (ev->data.l[1] == server.atom._NET_WM_CM_S0) { + if (ev->data.l[2] == None) + // TODO: Stop real_transparency + //signal_pending = SIGUSR2; + ; + else + // TODO: Start real_transparency + //signal_pending = SIGUSR2; + ; + } if (!systray.area.on_screen) break; if (e.xclient.message_type == server.atom._NET_SYSTEM_TRAY_OPCODE && e.xclient.format == 32 && e.xclient.window == net_sel_win) { net_message(&e.xclient); } - break; - } - } - } - event_timer(); - - switch (signal_pending) { - case SIGUSR1: - signal_pending = 0; - goto load_config; - case SIGINT: - case SIGTERM: - case SIGHUP: - cleanup (); - return 0; - } - - if (panel_refresh) { - panel_refresh = 0; + else if (e.xclient.message_type == server.atom.XdndPosition) { + dnd_message(&e.xclient); + } + break; - if (refresh_systray) { - panel = (Panel*)systray.area.panel; - XSetWindowBackgroundPixmap (server.dsp, panel->main_win, None); + default: + if (e.type == XDamageNotify+damage_event) { + // union needed to avoid strict-aliasing warnings by gcc + union { XEvent e; XDamageNotifyEvent de; } event_union = {.e=e}; + TrayWindow *traywin; + GSList *l; + XDamageNotifyEvent* de = &event_union.de; + for (l = systray.list_icons; l ; l = l->next) { + traywin = (TrayWindow*)l->data; + if ( traywin->id == de->drawable && !de->more ) { + systray_render_icon(traywin); + break; + } + } + } + } } - for (i=0 ; i < nb_panel ; i++) { - panel = &panel1[i]; - - if (panel->temp_pmap) XFreePixmap(server.dsp, panel->temp_pmap); - panel->temp_pmap = XCreatePixmap(server.dsp, server.root_win, panel->area.width, panel->area.height, server.depth); + } - refresh(&panel->area); - XCopyArea(server.dsp, panel->temp_pmap, panel->main_win, server.gc, 0, 0, panel->area.width, panel->area.height, 0, 0); - } - XFlush (server.dsp); + callback_timeout_expired(); - if (refresh_systray) { - refresh_systray = 0; - panel = (Panel*)systray.area.panel; - // tint2 doen't draw systray icons. it just redraw background. - XSetWindowBackgroundPixmap (server.dsp, panel->main_win, panel->temp_pmap); - // force icon's refresh - refresh_systray_icon(); - } + switch (signal_pending) { + case SIGUSR1: // reload config file + signal_pending = 0; + init_config(); + config_read_file (config_path); + init_panel(); + cleanup_config(); + break; + case SIGINT: + case SIGTERM: + case SIGHUP: + cleanup (); + return 0; } - } + } } diff -Nru tint2-0.7.1/src/tooltip/tooltip.c tint2-0.9/src/tooltip/tooltip.c --- tint2-0.7.1/src/tooltip/tooltip.c 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/tooltip/tooltip.c 2010-01-15 15:31:07.000000000 +0000 @@ -0,0 +1,313 @@ +/************************************************************************** +* +* Copyright (C) 2009 Andreas.Fink (Andreas.Fink85@gmail.com) +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License version 2 +* as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +**************************************************************************/ + +#include +#include +#include +#include +#include +#include + +#include "server.h" +#include "tooltip.h" +#include "panel.h" +#include "timer.h" + +static int x, y, width, height; + +// the next functions are helper functions for tooltip handling +void start_show_timeout(); +void start_hide_timeout(); +void stop_tooltip_timeout(); + +// give the tooltip some reasonable default values +Tooltip g_tooltip = { + .tooltip_text = 0, + .area = 0, + .panel = 0, + .window = 0, + .show_timeout_msec = 0, + .hide_timeout_msec = 0, + .enabled = False, + .mapped = False, + .paddingx = 0, + .paddingy = 0, + .font_color = { .color={1, 1, 1}, .alpha=1 }, + .bg = 0, + .font_desc = 0, + .timeout = 0 +}; + +void init_tooltip() +{ + if (!g_tooltip.font_desc) + g_tooltip.font_desc = pango_font_description_from_string("sans 10"); + + XSetWindowAttributes attr; + attr.override_redirect = True; + attr.event_mask = StructureNotifyMask; + attr.colormap = server.colormap; + attr.background_pixel = 0; + attr.border_pixel = 0; + unsigned long mask = CWEventMask|CWColormap|CWBorderPixel|CWBackPixel|CWOverrideRedirect; + if (g_tooltip.window) XDestroyWindow(server.dsp, g_tooltip.window); + g_tooltip.window = XCreateWindow(server.dsp, server.root_win, 0, 0, 100, 20, 0, server.depth, InputOutput, server.visual, mask, &attr); +} + + +void cleanup_tooltip() +{ + stop_tooltip_timeout(); + tooltip_hide(0); + g_tooltip.enabled = False; + tooltip_copy_text(0); + if (g_tooltip.window) { + XDestroyWindow(server.dsp, g_tooltip.window); + g_tooltip.window = 0; + } + if (g_tooltip.font_desc) { + pango_font_description_free(g_tooltip.font_desc); + g_tooltip.font_desc = 0; + } +} + + +void tooltip_trigger_show(Area* area, Panel* p, int x_root, int y_root) +{ + x = x_root; + y = y_root; + g_tooltip.panel = p; + if (g_tooltip.mapped && g_tooltip.area != area) { + tooltip_copy_text(area); + tooltip_update(); + stop_tooltip_timeout(); + } + else if (!g_tooltip.mapped) { + start_show_timeout(); + } +} + + +void tooltip_show(void* arg) +{ + int mx, my; + Window w; + XTranslateCoordinates( server.dsp, server.root_win, g_tooltip.panel->main_win, x, y, &mx, &my, &w); + Area* area = click_area(g_tooltip.panel, mx, my); + stop_tooltip_timeout(); + if (!g_tooltip.mapped && area->_get_tooltip_text) { + tooltip_copy_text(area); + g_tooltip.mapped = True; + XMapWindow(server.dsp, g_tooltip.window); + tooltip_update(); + XFlush(server.dsp); + } +} + + +void tooltip_update_geometry() +{ + cairo_surface_t *cs; + cairo_t *c; + PangoLayout* layout; + cs = cairo_xlib_surface_create(server.dsp, g_tooltip.window, server.visual, width, height); + c = cairo_create(cs); + layout = pango_cairo_create_layout(c); + pango_layout_set_font_description(layout, g_tooltip.font_desc); + pango_layout_set_text(layout, g_tooltip.tooltip_text, -1); + PangoRectangle r1, r2; + pango_layout_get_pixel_extents(layout, &r1, &r2); + width = 2*g_tooltip.bg->border.width + 2*g_tooltip.paddingx + r2.width; + height = 2*g_tooltip.bg->border.width + 2*g_tooltip.paddingy + r2.height; + + Panel* panel = g_tooltip.panel; + if (panel_horizontal && panel_position & BOTTOM) + y = panel->posy-height; + else if (panel_horizontal && panel_position & TOP) + y = panel->posy + panel->area.height; + else if (panel_position & LEFT) + x = panel->posx + panel->area.width; + else + x = panel->posx - width; + + g_object_unref(layout); + cairo_destroy(c); + cairo_surface_destroy(cs); +} + + +void tooltip_adjust_geometry() +{ + // adjust coordinates and size to not go offscreen + // it seems quite impossible that the height needs to be adjusted, but we do it anyway. + + int min_x, min_y, max_width, max_height; + Panel* panel = g_tooltip.panel; + int screen_width = server.monitor[panel->monitor].x + server.monitor[panel->monitor].width; + int screen_height = server.monitor[panel->monitor].y + server.monitor[panel->monitor].height; + if ( x+width <= screen_width && y+height <= screen_height && x>=0 && y>=0) + return; // no adjustment needed + + if (panel_horizontal) { + min_x=0; + max_width=screen_width; + max_height=screen_height-panel->area.height; + if (panel_position & BOTTOM) + min_y=0; + else + min_y=panel->area.height; + } + else { + max_width=screen_width-panel->area.width; + min_y=0; + max_height=screen_height; + if (panel_position & LEFT) + min_x=panel->area.width; + else + min_x=0; + } + + if (x+width > server.monitor[panel->monitor].x + server.monitor[panel->monitor].width) + x = server.monitor[panel->monitor].x + server.monitor[panel->monitor].width - width; + if ( y+height > server.monitor[panel->monitor].y + server.monitor[panel->monitor].height) + y = server.monitor[panel->monitor].y + server.monitor[panel->monitor].height - height; + + if (xmax_width) + width = max_width; + if (ymax_height) + height=max_height; +} + +void tooltip_update() +{ + if (!g_tooltip.tooltip_text) { + tooltip_hide(0); + return; + } + + tooltip_update_geometry(); + tooltip_adjust_geometry(); + XMoveResizeWindow(server.dsp, g_tooltip.window, x, y, width, height); + + // Stuff for drawing the tooltip + cairo_surface_t *cs; + cairo_t *c; + PangoLayout* layout; + cs = cairo_xlib_surface_create(server.dsp, g_tooltip.window, server.visual, width, height); + c = cairo_create(cs); + Color bc = g_tooltip.bg->back; + Border b = g_tooltip.bg->border; + if (real_transparency) { + clear_pixmap(g_tooltip.window, 0, 0, width, height); + draw_rect(c, b.width, b.width, width-2*b.width, height-2*b.width, b.rounded-b.width/1.571); + cairo_set_source_rgba(c, bc.color[0], bc.color[1], bc.color[2], bc.alpha); + } + else { + cairo_rectangle(c, 0., 0, width, height); + cairo_set_source_rgb(c, bc.color[0], bc.color[1], bc.color[2]); + } + cairo_fill(c); + cairo_set_line_width(c, b.width); + if (real_transparency) draw_rect(c, b.width/2.0, b.width/2.0, width - b.width, height - b.width, b.rounded); + else cairo_rectangle(c, b.width/2.0, b.width/2.0, width-b.width, height-b.width); + cairo_set_source_rgba(c, b.color[0], b.color[1], b.color[2], b.alpha); + cairo_stroke(c); + + Color fc = g_tooltip.font_color; + cairo_set_source_rgba(c, fc.color[0], fc.color[1], fc.color[2], fc.alpha); + layout = pango_cairo_create_layout(c); + pango_layout_set_font_description(layout, g_tooltip.font_desc); + pango_layout_set_text(layout, g_tooltip.tooltip_text, -1); + PangoRectangle r1, r2; + pango_layout_get_pixel_extents(layout, &r1, &r2); + pango_layout_set_width(layout, width*PANGO_SCALE); + pango_layout_set_height(layout, height*PANGO_SCALE); + pango_layout_set_ellipsize(layout, PANGO_ELLIPSIZE_END); + // I do not know why this is the right way, but with the below cairo_move_to it seems to be centered (horiz. and vert.) + cairo_move_to(c, -r1.x/2+g_tooltip.bg->border.width+g_tooltip.paddingx, -r1.y/2+g_tooltip.bg->border.width+g_tooltip.paddingy); + pango_cairo_show_layout (c, layout); + + g_object_unref (layout); + cairo_destroy (c); + cairo_surface_destroy (cs); +} + + +void tooltip_trigger_hide(Tooltip* tooltip) +{ + if (g_tooltip.mapped) { + tooltip_copy_text(0); + start_hide_timeout(); + } + else { + // tooltip not visible yet, but maybe a timeout is still pending + stop_tooltip_timeout(); + } +} + + +void tooltip_hide(void* arg) +{ + stop_tooltip_timeout(); + if (g_tooltip.mapped) { + g_tooltip.mapped = False; + XUnmapWindow(server.dsp, g_tooltip.window); + XFlush(server.dsp); + } +} + + +void start_show_timeout() +{ + if (g_tooltip.timeout) + change_timeout(g_tooltip.timeout, g_tooltip.show_timeout_msec, 0, tooltip_show, 0); + else + g_tooltip.timeout = add_timeout(g_tooltip.show_timeout_msec, 0, tooltip_show, 0); +} + + +void start_hide_timeout() +{ + if (g_tooltip.timeout) + change_timeout(g_tooltip.timeout, g_tooltip.hide_timeout_msec, 0, tooltip_hide, 0); + else + g_tooltip.timeout = add_timeout(g_tooltip.hide_timeout_msec, 0, tooltip_hide, 0); +} + + +void stop_tooltip_timeout() +{ + if (g_tooltip.timeout) { + stop_timeout(g_tooltip.timeout); + g_tooltip.timeout = 0; + } +} + + +void tooltip_copy_text(Area* area) +{ + free(g_tooltip.tooltip_text); + if (area && area->_get_tooltip_text) + g_tooltip.tooltip_text = strdup(area->_get_tooltip_text(area)); + else + g_tooltip.tooltip_text = 0; + g_tooltip.area = area; +} diff -Nru tint2-0.7.1/src/tooltip/tooltip.h tint2-0.9/src/tooltip/tooltip.h --- tint2-0.7.1/src/tooltip/tooltip.h 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/tooltip/tooltip.h 2010-01-15 15:31:07.000000000 +0000 @@ -0,0 +1,54 @@ +/************************************************************************** +* +* Copyright (C) 2009 Andreas.Fink (Andreas.Fink85@gmail.com) +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License version 2 +* as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +**************************************************************************/ + +#ifndef TOOLTIP_H +#define TOOLTIP_H + +#include "task.h" +#include "panel.h" +#include "timer.h" + + +typedef struct { + Area* area; // never ever use the area attribut if you are not 100% sure that this area was not freed + char* tooltip_text; + Panel* panel; + Window window; + int show_timeout_msec; + int hide_timeout_msec; + Bool enabled; + Bool mapped; + int paddingx; + int paddingy; + PangoFontDescription* font_desc; + Color font_color; + Background* bg; + timeout* timeout; +} Tooltip; + +extern Tooltip g_tooltip; + +void init_tooltip(); +void cleanup_tooltip(); +void tooltip_trigger_show(Area* area, Panel* p, int x, int y); +void tooltip_show(void* /*arg*/); +void tooltip_update(); +void tooltip_trigger_hide(); +void tooltip_hide(void* /*arg*/); +void tooltip_copy_text(Area* area); + +#endif // TOOLTIP_H diff -Nru tint2-0.7.1/src/util/area.c tint2-0.9/src/util/area.c --- tint2-0.7.1/src/util/area.c 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/util/area.c 2010-01-09 00:11:01.000000000 +0000 @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -29,6 +30,7 @@ #include "server.h" #include "panel.h" + // 1) resize child // 2) resize parent // 3) redraw parent @@ -41,23 +43,25 @@ size(a); // don't draw transparent objects (without foreground and without background) - if (a->redraw) { - a->redraw = 0; - //printf("draw area posx %d, width %d\n", a->posx, a->width); - draw(a, 0); - if (a->use_active) - draw(a, 1); + if (a->redraw) { + a->redraw = 0; + // force redraw of child + GSList *l; + for (l = a->list ; l ; l = l->next) + set_redraw(l->data); + + //printf("draw area posx %d, width %d\n", a->posx, a->width); + draw(a); } // draw current Area - Pixmap *pmap = (a->is_active == 0) ? (&a->pix.pmap) : (&a->pix_active.pmap); - if (*pmap == 0) printf("empty area posx %d, width %d\n", a->posx, a->width); - XCopyArea (server.dsp, *pmap, ((Panel *)a->panel)->temp_pmap, server.gc, 0, 0, a->width, a->height, a->posx, a->posy); + if (a->pix == 0) printf("empty area posx %d, width %d\n", a->posx, a->width); + XCopyArea (server.dsp, a->pix, ((Panel *)a->panel)->temp_pmap, server.gc, 0, 0, a->width, a->height, a->posx, a->posy); - // and then refresh child object + // and then refresh child object GSList *l; - for (l = a->list; l ; l = l->next) - refresh(l->data); + for (l = a->list; l ; l = l->next) + refresh(l->data); } @@ -66,173 +70,176 @@ GSList *l; if (a->resize) { - a->resize = 0; - for (l = a->list; l ; l = l->next) - size(l->data); - - // resize can generate a redraw - if (a->_resize) { - a->_resize(a); + a->resize = 0; + // force the resize of childs + for (l = a->list; l ; l = l->next) { + Area *area = (Area*)l->data; + area->resize = 1; + size(area); } + + // resize can generate a redraw + if (a->_resize) + a->_resize(a); } } void set_redraw (Area *a) { - a->redraw = 1; + a->redraw = 1; - GSList *l; - for (l = a->list ; l ; l = l->next) - set_redraw(l->data); + GSList *l; + for (l = a->list ; l ; l = l->next) + set_redraw(l->data); } -void draw (Area *a, int active) +void draw (Area *a) { - Pixmap *pmap = (active == 0) ? (&a->pix.pmap) : (&a->pix_active.pmap); + if (a->pix) XFreePixmap (server.dsp, a->pix); + a->pix = XCreatePixmap (server.dsp, server.root_win, a->width, a->height, server.depth); - if (*pmap) XFreePixmap (server.dsp, *pmap); - *pmap = XCreatePixmap (server.dsp, server.root_win, a->width, a->height, server.depth); + // add layer of root pixmap (or clear pixmap if real_transparency==true) + if (real_transparency) + clear_pixmap(a->pix, 0 ,0, a->width, a->height); + XCopyArea (server.dsp, ((Panel *)a->panel)->temp_pmap, a->pix, server.gc, a->posx, a->posy, a->width, a->height, 0, 0); - // add layer of root pixmap - XCopyArea (server.dsp, ((Panel *)a->panel)->temp_pmap, *pmap, server.gc, a->posx, a->posy, a->width, a->height, 0, 0); + cairo_surface_t *cs; + cairo_t *c; - cairo_surface_t *cs; - cairo_t *c; + cs = cairo_xlib_surface_create (server.dsp, a->pix, server.visual, a->width, a->height); + c = cairo_create (cs); - cs = cairo_xlib_surface_create (server.dsp, *pmap, server.visual, a->width, a->height); - c = cairo_create (cs); + draw_background (a, c); - draw_background (a, c, active); + if (a->_draw_foreground) + a->_draw_foreground(a, c); - if (a->_draw_foreground) - a->_draw_foreground(a, c, active); - - cairo_destroy (c); - cairo_surface_destroy (cs); + cairo_destroy (c); + cairo_surface_destroy (cs); } -void draw_background (Area *a, cairo_t *c, int active) +void draw_background (Area *a, cairo_t *c) { - Pmap *pix = (active == 0) ? (&a->pix) : (&a->pix_active); - - if (pix->back.alpha > 0.0) { - //printf(" draw_background (%d %d) RGBA (%lf, %lf, %lf, %lf)\n", a->posx, a->posy, pix->back.color[0], pix->back.color[1], pix->back.color[2], pix->back.alpha); - draw_rect(c, pix->border.width, pix->border.width, a->width-(2.0 * pix->border.width), a->height-(2.0*pix->border.width), pix->border.rounded - pix->border.width/1.571); - cairo_set_source_rgba(c, pix->back.color[0], pix->back.color[1], pix->back.color[2], pix->back.alpha); - - cairo_fill(c); - } - - if (pix->border.width > 0 && pix->border.alpha > 0.0) { - cairo_set_line_width (c, pix->border.width); - - // draw border inside (x, y, width, height) - draw_rect(c, pix->border.width/2.0, pix->border.width/2.0, a->width - pix->border.width, a->height - pix->border.width, pix->border.rounded); - /* - // convert : radian = degre * M_PI/180 - // définir le dégradé dans un carré de (0,0) (100,100) - // ensuite ce dégradé est extrapolé selon le ratio width/height - // dans repère (0, 0) (100, 100) - double X0, Y0, X1, Y1, degre; - // x = X * (a->width / 100), y = Y * (a->height / 100) - double x0, y0, x1, y1; - X0 = 0; - Y0 = 100; - X1 = 100; - Y1 = 0; - degre = 45; - // et ensuite faire la changement d'unité du repère - // car ce qui doit resté inchangée est les traits et pas la direction - - // il faut d'abord appliquer une rotation de 90° (et -180° si l'angle est supérieur à 180°) - // ceci peut être appliqué une fois pour toute au départ - // ensuite calculer l'angle dans le nouveau repère - // puis faire une rotation de 90° - x0 = X0 * ((double)a->width / 100); - x1 = X1 * ((double)a->width / 100); - y0 = Y0 * ((double)a->height / 100); - y1 = Y1 * ((double)a->height / 100); + if (a->bg->back.alpha > 0.0) { + //printf(" draw_background (%d %d) RGBA (%lf, %lf, %lf, %lf)\n", a->posx, a->posy, pix->back.color[0], pix->back.color[1], pix->back.color[2], pix->back.alpha); + draw_rect(c, a->bg->border.width, a->bg->border.width, a->width-(2.0 * a->bg->border.width), a->height-(2.0*a->bg->border.width), a->bg->border.rounded - a->bg->border.width/1.571); + cairo_set_source_rgba(c, a->bg->back.color[0], a->bg->back.color[1], a->bg->back.color[2], a->bg->back.alpha); + cairo_fill(c); + } - x0 = X0 * ((double)a->height / 100); - x1 = X1 * ((double)a->height / 100); - y0 = Y0 * ((double)a->width / 100); - y1 = Y1 * ((double)a->width / 100); + if (a->bg->border.width > 0 && a->bg->border.alpha > 0.0) { + cairo_set_line_width (c, a->bg->border.width); - cairo_pattern_t *linpat; - linpat = cairo_pattern_create_linear (x0, y0, x1, y1); - cairo_pattern_add_color_stop_rgba (linpat, 0, a->border.color[0], a->border.color[1], a->border.color[2], a->border.alpha); - cairo_pattern_add_color_stop_rgba (linpat, 1, a->border.color[0], a->border.color[1], a->border.color[2], 0); - cairo_set_source (c, linpat); - */ - cairo_set_source_rgba (c, pix->border.color[0], pix->border.color[1], pix->border.color[2], pix->border.alpha); + // draw border inside (x, y, width, height) + draw_rect(c, a->bg->border.width/2.0, a->bg->border.width/2.0, a->width - a->bg->border.width, a->height - a->bg->border.width, a->bg->border.rounded); + /* + // convert : radian = degre * M_PI/180 + // définir le dégradé dans un carré de (0,0) (100,100) + // ensuite ce dégradé est extrapolé selon le ratio width/height + // dans repère (0, 0) (100, 100) + double X0, Y0, X1, Y1, degre; + // x = X * (a->width / 100), y = Y * (a->height / 100) + double x0, y0, x1, y1; + X0 = 0; + Y0 = 100; + X1 = 100; + Y1 = 0; + degre = 45; + // et ensuite faire la changement d'unité du repère + // car ce qui doit resté inchangée est les traits et pas la direction + + // il faut d'abord appliquer une rotation de 90° (et -180° si l'angle est supérieur à 180°) + // ceci peut être appliqué une fois pour toute au départ + // ensuite calculer l'angle dans le nouveau repère + // puis faire une rotation de 90° + x0 = X0 * ((double)a->width / 100); + x1 = X1 * ((double)a->width / 100); + y0 = Y0 * ((double)a->height / 100); + y1 = Y1 * ((double)a->height / 100); + + x0 = X0 * ((double)a->height / 100); + x1 = X1 * ((double)a->height / 100); + y0 = Y0 * ((double)a->width / 100); + y1 = Y1 * ((double)a->width / 100); + + cairo_pattern_t *linpat; + linpat = cairo_pattern_create_linear (x0, y0, x1, y1); + cairo_pattern_add_color_stop_rgba (linpat, 0, a->border.color[0], a->border.color[1], a->border.color[2], a->border.alpha); + cairo_pattern_add_color_stop_rgba (linpat, 1, a->border.color[0], a->border.color[1], a->border.color[2], 0); + cairo_set_source (c, linpat); + */ + cairo_set_source_rgba (c, a->bg->border.color[0], a->bg->border.color[1], a->bg->border.color[2], a->bg->border.alpha); - cairo_stroke (c); - //cairo_pattern_destroy (linpat); - } + cairo_stroke (c); + //cairo_pattern_destroy (linpat); + } } void remove_area (Area *a) { - Area *parent = (Area*)a->parent; + Area *parent = (Area*)a->parent; - parent->list = g_slist_remove(parent->list, a); - set_redraw (parent); + parent->list = g_slist_remove(parent->list, a); + set_redraw (parent); } void add_area (Area *a) { - Area *parent = (Area*)a->parent; + Area *parent = (Area*)a->parent; - parent->list = g_slist_remove(parent->list, a); - set_redraw (parent); + parent->list = g_slist_remove(parent->list, a); + set_redraw (parent); } void free_area (Area *a) { - GSList *l0; - for (l0 = a->list; l0 ; l0 = l0->next) - free_area (l0->data); - - if (a->list) { - g_slist_free(a->list); - a->list = 0; - } - if (a->pix.pmap) { - XFreePixmap (server.dsp, a->pix.pmap); - a->pix.pmap = 0; - } - if (a->pix_active.pmap) { - XFreePixmap (server.dsp, a->pix_active.pmap); - a->pix_active.pmap = 0; + GSList *l0; + for (l0 = a->list; l0 ; l0 = l0->next) + free_area (l0->data); + + if (a->list) { + g_slist_free(a->list); + a->list = 0; + } + if (a->pix) { + XFreePixmap (server.dsp, a->pix); + a->pix = 0; } } void draw_rect(cairo_t *c, double x, double y, double w, double h, double r) { - if (r > 0.0) { - double c1 = 0.55228475 * r; + if (r > 0.0) { + double c1 = 0.55228475 * r; - cairo_move_to(c, x+r, y); - cairo_rel_line_to(c, w-2*r, 0); - cairo_rel_curve_to(c, c1, 0.0, r, c1, r, r); - cairo_rel_line_to(c, 0, h-2*r); - cairo_rel_curve_to(c, 0.0, c1, c1-r, r, -r, r); - cairo_rel_line_to (c, -w +2*r, 0); - cairo_rel_curve_to (c, -c1, 0, -r, -c1, -r, -r); - cairo_rel_line_to (c, 0, -h + 2 * r); - cairo_rel_curve_to (c, 0, -c1, r - c1, -r, r, -r); - } - else - cairo_rectangle(c, x, y, w, h); + cairo_move_to(c, x+r, y); + cairo_rel_line_to(c, w-2*r, 0); + cairo_rel_curve_to(c, c1, 0.0, r, c1, r, r); + cairo_rel_line_to(c, 0, h-2*r); + cairo_rel_curve_to(c, 0.0, c1, c1-r, r, -r, r); + cairo_rel_line_to (c, -w +2*r, 0); + cairo_rel_curve_to (c, -c1, 0, -r, -c1, -r, -r); + cairo_rel_line_to (c, 0, -h + 2 * r); + cairo_rel_curve_to (c, 0, -c1, r - c1, -r, r, -r); + } + else + cairo_rectangle(c, x, y, w, h); } +void clear_pixmap(Pixmap p, int x, int y, int w, int h) +{ + Picture pict = XRenderCreatePicture(server.dsp, p, XRenderFindVisualFormat(server.dsp, server.visual), 0, 0); + XRenderColor col = { .red=0, .green=0, .blue=0, .alpha=0 }; + XRenderFillRectangle(server.dsp, PictOpSrc, pict, &col, x, y, w, h); + XRenderFreePicture(server.dsp, pict); +} diff -Nru tint2-0.7.1/src/util/area.h tint2-0.9/src/util/area.h --- tint2-0.7.1/src/util/area.h 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/util/area.h 2010-01-09 00:11:01.000000000 +0000 @@ -5,7 +5,7 @@ * Area is at the begining of each object (&object == &area). * * Area manage the background and border drawing, size and padding. -* Each Area have 2 Pixmap (pix and pix_active). +* Each Area has one Pixmap (pix). * * Area manage the tree of all objects. Parent object drawn before child object. * panel -> taskbars -> tasks @@ -27,58 +27,57 @@ typedef struct { - double color[3]; - double alpha; - int width; - int rounded; + double color[3]; + double alpha; + int width; + int rounded; } Border; typedef struct { - double color[3]; - double alpha; + double color[3]; + double alpha; } Color; - typedef struct { - Pixmap pmap; - Color back; - Border border; -} Pmap; + Color back; + Border border; +} Background; + typedef struct { - // absolute coordinate in panel - int posx, posy; - // width and height including border - int width, height; - Pmap pix; - Pmap pix_active; + // coordinate relative to panel window + int posx, posy; + // width and height including border + int width, height; + Pixmap pix; + Background *bg; - // list of child : Area object - GSList *list; + // list of child : Area object + GSList *list; int on_screen; // need compute position and width int resize; - // need redraw Pixmap - int redraw; - int use_active, is_active; - // paddingxlr = horizontal padding left/right - // paddingx = horizontal padding between childs - int paddingxlr, paddingx, paddingy; - // parent Area - void *parent; - // panel - void *panel; - - // each object can overwrite following function - void (*_draw_foreground)(void *obj, cairo_t *c, int active); - void (*_resize)(void *obj); - void (*_add_child)(void *obj); - int (*_remove_child)(void *obj); + // need redraw Pixmap + int redraw; + // paddingxlr = horizontal padding left/right + // paddingx = horizontal padding between childs + int paddingxlr, paddingx, paddingy; + // parent Area + void *parent; + // panel + void *panel; + + // each object can overwrite following function + void (*_draw_foreground)(void *obj, cairo_t *c); + void (*_resize)(void *obj); + void (*_add_child)(void *obj); + int (*_remove_child)(void *obj); + const char* (*_get_tooltip_text)(void *obj); } Area; @@ -91,9 +90,9 @@ // set 'redraw' on an area and childs void set_redraw (Area *a); -// draw pixmap and pixmap_active -void draw (Area *a, int active); -void draw_background (Area *a, cairo_t *c, int active); +// draw pixmap +void draw (Area *a); +void draw_background (Area *a, cairo_t *c); void remove_area (Area *a); void add_area (Area *a); @@ -102,5 +101,7 @@ // draw rounded rectangle void draw_rect(cairo_t *c, double x, double y, double w, double h, double r); +// clear pixmap with transparent color +void clear_pixmap(Pixmap p, int x, int y, int w, int h); #endif diff -Nru tint2-0.7.1/src/util/common.c tint2-0.9/src/util/common.c --- tint2-0.7.1/src/util/common.c 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/util/common.c 2010-01-18 21:11:05.000000000 +0000 @@ -0,0 +1,287 @@ +/************************************************************************** +* +* Tint2 : common windows function +* +* Copyright (C) 2007 Pål Staurland (staura@gmail.com) +* Modified (C) 2008 thierry lorthiois (lorthiois@bbsoft.fr) +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License version 2 +* as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +**************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include + + +#include "common.h" +#include "../server.h" + + + +void copy_file(const char *pathSrc, const char *pathDest) +{ + FILE *fileSrc, *fileDest; + char line[100]; + int nb; + + fileSrc = fopen(pathSrc, "rb"); + if (fileSrc == NULL) return; + + fileDest = fopen(pathDest, "wb"); + if (fileDest == NULL) return; + + while ((nb = fread(line, 1, 100, fileSrc)) > 0) + if ( nb != fwrite(line, 1, nb, fileDest)) + printf("Error while copying file %s to %s\n", pathSrc, pathDest); + + fclose (fileDest); + fclose (fileSrc); +} + + +int parse_line (const char *line, char **key, char **value) +{ + char *a, *b; + + /* Skip useless lines */ + if ((line[0] == '#') || (line[0] == '\n')) return 0; + if (!(a = strchr (line, '='))) return 0; + + /* overwrite '=' with '\0' */ + a[0] = '\0'; + *key = strdup (line); + a++; + + /* overwrite '\n' with '\0' if '\n' present */ + if ((b = strchr (a, '\n'))) b[0] = '\0'; + + *value = strdup (a); + + g_strstrip(*key); + g_strstrip(*value); + return 1; +} + + +int hex_char_to_int (char c) +{ + int r; + + if (c >= '0' && c <= '9') r = c - '0'; + else if (c >= 'a' && c <= 'f') r = c - 'a' + 10; + else if (c >= 'A' && c <= 'F') r = c - 'A' + 10; + else r = 0; + + return r; +} + + +int hex_to_rgb (char *hex, int *r, int *g, int *b) +{ + int len; + + if (hex == NULL || hex[0] != '#') return (0); + + len = strlen (hex); + if (len == 3 + 1) { + *r = hex_char_to_int (hex[1]); + *g = hex_char_to_int (hex[2]); + *b = hex_char_to_int (hex[3]); + } + else if (len == 6 + 1) { + *r = hex_char_to_int (hex[1]) * 16 + hex_char_to_int (hex[2]); + *g = hex_char_to_int (hex[3]) * 16 + hex_char_to_int (hex[4]); + *b = hex_char_to_int (hex[5]) * 16 + hex_char_to_int (hex[6]); + } + else if (len == 12 + 1) { + *r = hex_char_to_int (hex[1]) * 16 + hex_char_to_int (hex[2]); + *g = hex_char_to_int (hex[5]) * 16 + hex_char_to_int (hex[6]); + *b = hex_char_to_int (hex[9]) * 16 + hex_char_to_int (hex[10]); + } + else return 0; + + return 1; +} + + +void get_color (char *hex, double *rgb) +{ + int r, g, b; + hex_to_rgb (hex, &r, &g, &b); + + rgb[0] = (r / 255.0); + rgb[1] = (g / 255.0); + rgb[2] = (b / 255.0); +} + + +void adjust_asb(DATA32 *data, int w, int h, int alpha, float satur, float bright) +{ + unsigned int x, y; + unsigned int a, r, g, b, argb; + unsigned long id; + int cmax, cmin; + float h2, f, p, q, t; + float hue, saturation, brightness; + float redc, greenc, bluec; + + for(y = 0; y < h; y++) { + for(id = y * w, x = 0; x < w; x++, id++) { + argb = data[id]; + a = (argb >> 24) & 0xff; + // transparent => nothing to do. + if (a == 0) continue; + r = (argb >> 16) & 0xff; + g = (argb >> 8) & 0xff; + b = (argb) & 0xff; + + // convert RGB to HSB + cmax = (r > g) ? r : g; + if (b > cmax) cmax = b; + cmin = (r < g) ? r : g; + if (b < cmin) cmin = b; + brightness = ((float)cmax) / 255.0f; + if (cmax != 0) + saturation = ((float)(cmax - cmin)) / ((float)cmax); + else + saturation = 0; + if (saturation == 0) + hue = 0; + else { + redc = ((float)(cmax - r)) / ((float)(cmax - cmin)); + greenc = ((float)(cmax - g)) / ((float)(cmax - cmin)); + bluec = ((float)(cmax - b)) / ((float)(cmax - cmin)); + if (r == cmax) + hue = bluec - greenc; + else if (g == cmax) + hue = 2.0f + redc - bluec; + else + hue = 4.0f + greenc - redc; + hue = hue / 6.0f; + if (hue < 0) + hue = hue + 1.0f; + } + + // adjust + saturation += satur; + if (saturation < 0.0) saturation = 0.0; + if (saturation > 1.0) saturation = 1.0; + brightness += bright; + if (brightness < 0.0) brightness = 0.0; + if (brightness > 1.0) brightness = 1.0; + if (alpha != 100) + a = (a * alpha)/100; + + // convert HSB to RGB + if (saturation == 0) { + r = g = b = (int)(brightness * 255.0f + 0.5f); + } else { + h2 = (hue - (int)hue) * 6.0f; + f = h2 - (int)(h2); + p = brightness * (1.0f - saturation); + q = brightness * (1.0f - saturation * f); + t = brightness * (1.0f - (saturation * (1.0f - f))); + switch ((int) h2) { + case 0: + r = (int)(brightness * 255.0f + 0.5f); + g = (int)(t * 255.0f + 0.5f); + b = (int)(p * 255.0f + 0.5f); + break; + case 1: + r = (int)(q * 255.0f + 0.5f); + g = (int)(brightness * 255.0f + 0.5f); + b = (int)(p * 255.0f + 0.5f); + break; + case 2: + r = (int)(p * 255.0f + 0.5f); + g = (int)(brightness * 255.0f + 0.5f); + b = (int)(t * 255.0f + 0.5f); + break; + case 3: + r = (int)(p * 255.0f + 0.5f); + g = (int)(q * 255.0f + 0.5f); + b = (int)(brightness * 255.0f + 0.5f); + break; + case 4: + r = (int)(t * 255.0f + 0.5f); + g = (int)(p * 255.0f + 0.5f); + b = (int)(brightness * 255.0f + 0.5f); + break; + case 5: + r = (int)(brightness * 255.0f + 0.5f); + g = (int)(p * 255.0f + 0.5f); + b = (int)(q * 255.0f + 0.5f); + break; + } + } + + argb = a; + argb = (argb << 8) + r; + argb = (argb << 8) + g; + argb = (argb << 8) + b; + data[id] = argb; + } + } +} + + +void createHeuristicMask(DATA32* data, int w, int h) +{ + // first we need to find the mask color, therefore we check all 4 edge pixel and take the color which + // appears most often (we only need to check three edges, the 4th is implicitly clear) + unsigned int topLeft = data[0], topRight = data[w-1], bottomLeft = data[w*h-w], bottomRight = data[w*h-1]; + int max = (topLeft == topRight) + (topLeft == bottomLeft) + (topLeft == bottomRight); + int maskPos = 0; + if ( max < (topRight == topLeft) + (topRight == bottomLeft) + (topRight == bottomRight) ) { + max = (topRight == topLeft) + (topRight == bottomLeft) + (topRight == bottomRight); + maskPos = w-1; + } + if ( max < (bottomLeft == topRight) + (bottomLeft == topLeft) + (bottomLeft == bottomRight) ) + maskPos = w*h-w; + + // now mask out every pixel which has the same color as the edge pixels + unsigned char* udata = (unsigned char*)data; + unsigned char b = udata[4*maskPos]; + unsigned char g = udata[4*maskPos+1]; + unsigned char r = udata[4*maskPos+1]; + int i; + for (i=0; i #include "area.h" /* @@ -28,28 +29,27 @@ */ // mouse actions -enum { NONE=0, CLOSE, TOGGLE, ICONIFY, SHADE, TOGGLE_ICONIFY }; +enum { NONE=0, CLOSE, TOGGLE, ICONIFY, SHADE, TOGGLE_ICONIFY, MAXIMIZE_RESTORE, MAXIMIZE, RESTORE, DESKTOP_LEFT, DESKTOP_RIGHT, NEXT_TASK, PREV_TASK }; #define ALLDESKTOP 0xFFFFFFFF -typedef struct config_border -{ - double color[3]; - double alpha; - int width; - int rounded; -} config_border; - - -typedef struct config_color -{ - double color[3]; - double alpha; -} config_color; - +// copy file source to file dest +void copy_file(const char *pathSrc, const char *pathDest); +// extract key = value +int parse_line (const char *line, char **key, char **value); +// conversion +int hex_char_to_int (char c); +int hex_to_rgb (char *hex, int *r, int *g, int *b); +void get_color (char *hex, double *rgb); + +// adjust Alpha/Saturation/Brightness on an ARGB icon +// alpha from 0 to 100, satur from 0 to 1, bright from 0 to 1. +void adjust_asb(DATA32 *data, int w, int h, int alpha, float satur, float bright); +void createHeuristicMask(DATA32* data, int w, int h); +void render_image(Drawable d, int x, int y, int w, int h); #endif diff -Nru tint2-0.7.1/src/util/timer.c tint2-0.9/src/util/timer.c --- tint2-0.7.1/src/util/timer.c 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/util/timer.c 2010-01-14 12:00:53.000000000 +0000 @@ -0,0 +1,424 @@ +/************************************************************************** +* +* Copyright (C) 2009 Andreas.Fink (Andreas.Fink85@gmail.com) +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License version 2 +* as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +**************************************************************************/ + +#include +#include +#include +#include + +#include "timer.h" + +GSList* timeout_list = 0; +struct timeval next_timeout; + + +// functions and structs for multi timeouts +typedef struct { + int current_count; + int count_to_expiration; +} multi_timeout; + +typedef struct { + GSList* timeout_list; + timeout* parent_timeout; +} multi_timeout_handler; + +struct _timeout { + int interval_msec; + struct timespec timeout_expires; + void (*_callback)(void*); + void* arg; + multi_timeout* multi_timeout; +}; + +void add_timeout_intern(int value_msec, int interval_msec, void(*_callback)(void*), void* arg, timeout* t); +gint compare_timeouts(gconstpointer t1, gconstpointer t2); +gint compare_timespecs(const struct timespec* t1, const struct timespec* t2); +int timespec_subtract(struct timespec* result, struct timespec* x, struct timespec* y); +struct timespec add_msec_to_timespec(struct timespec ts, int msec); + + +int align_with_existing_timeouts(timeout* t); +void create_multi_timeout(timeout* t1, timeout* t2); +void append_multi_timeout(timeout* t1, timeout* t2); +int calc_multi_timeout_interval(multi_timeout_handler* mth); +void update_multi_timeout_values(multi_timeout_handler* mth); +void callback_multi_timeout(void* mth); +void remove_from_multi_timeout(timeout* t); +void stop_multi_timeout(timeout* t); + +GHashTable* multi_timeouts = 0; + +/** Implementation notes for timeouts: The timeouts are kept in a GSList sorted by their + * expiration time. + * That means that update_next_timeout() only have to consider the first timeout in the list, + * and callback_timeout_expired() only have to consider the timeouts as long as the expiration time + * is in the past to the current time. + * As time measurement we use clock_gettime(CLOCK_MONOTONIC) because this refers to a timer, which + * reference point lies somewhere in the past and cannot be changed, but just queried. + * If a single shot timer is installed it will be automatically deleted. I.e. the returned value + * of add_timeout will not be valid anymore. You do not need to call stop_timeout for these timeouts, + * however it's save to call it. +**/ + +timeout* add_timeout(int value_msec, int interval_msec, void (*_callback)(void*), void* arg) +{ + timeout* t = malloc(sizeof(timeout)); + t->multi_timeout = 0; + add_timeout_intern(value_msec, interval_msec, _callback, arg, t); + return t; +} + + +void change_timeout(timeout *t, int value_msec, int interval_msec, void(*_callback)(), void* arg) +{ + if ( g_slist_find(timeout_list, t) == 0 && g_hash_table_lookup(multi_timeouts, t) == 0) + printf("programming error: timeout already deleted..."); + else { + if (t->multi_timeout) + remove_from_multi_timeout((timeout*)t); + else + timeout_list = g_slist_remove(timeout_list, t); + add_timeout_intern(value_msec, interval_msec, _callback, arg, (timeout*)t); + } +} + + +void update_next_timeout() +{ + if (timeout_list) { + timeout* t = timeout_list->data; + struct timespec cur_time; + struct timespec next_timeout2 = { .tv_sec=next_timeout.tv_sec, .tv_nsec=next_timeout.tv_usec*1000 }; + clock_gettime(CLOCK_MONOTONIC, &cur_time); + if (timespec_subtract(&next_timeout2, &t->timeout_expires, &cur_time)) { + next_timeout.tv_sec = 0; + next_timeout.tv_usec = 0; + } + else { + next_timeout.tv_sec = next_timeout2.tv_sec; + next_timeout.tv_usec = next_timeout2.tv_nsec/1000; + } + } + else + next_timeout.tv_sec = -1; +} + + +void callback_timeout_expired() +{ + struct timespec cur_time; + timeout* t; + while (timeout_list) { + clock_gettime(CLOCK_MONOTONIC, &cur_time); + t = timeout_list->data; + if (compare_timespecs(&t->timeout_expires, &cur_time) <= 0) { + // it's time for the callback function + t->_callback(t->arg); + if (g_slist_find(timeout_list, t)) { + // if _callback() calls stop_timeout(t) the timeout 't' was freed and is not in the timeout_list + timeout_list = g_slist_remove(timeout_list, t); + if (t->interval_msec > 0) + add_timeout_intern(t->interval_msec, t->interval_msec, t->_callback, t->arg, t); + else + free(t); + } + } + else + return; + } +} + + +void stop_timeout(timeout* t) +{ + // if not in the list, it was deleted in callback_timeout_expired + if (g_slist_find(timeout_list, t) || g_hash_table_lookup(multi_timeouts, t)) { + if (t->multi_timeout) + remove_from_multi_timeout((timeout*)t); + timeout_list = g_slist_remove(timeout_list, t); + free((void*)t); + } +} + + +void stop_all_timeouts() +{ + while (timeout_list) { + timeout* t = timeout_list->data; + if (t->multi_timeout) + stop_multi_timeout(t); + free(t); + timeout_list = g_slist_remove(timeout_list, t); + } +} + + +void add_timeout_intern(int value_msec, int interval_msec, void(*_callback)(), void* arg, timeout *t) +{ + t->interval_msec = interval_msec; + t->_callback = _callback; + t->arg = arg; + struct timespec cur_time; + clock_gettime(CLOCK_MONOTONIC, &cur_time); + t->timeout_expires = add_msec_to_timespec(cur_time, value_msec); + + int can_align = 0; + if (interval_msec > 0 && !t->multi_timeout) + can_align = align_with_existing_timeouts(t); + if (!can_align) + timeout_list = g_slist_insert_sorted(timeout_list, t, compare_timeouts); +} + + +gint compare_timeouts(gconstpointer t1, gconstpointer t2) +{ + return compare_timespecs(&((timeout*)t1)->timeout_expires, + &((timeout*)t2)->timeout_expires); +} + + +gint compare_timespecs(const struct timespec* t1, const struct timespec* t2) +{ + if (t1->tv_sec < t2->tv_sec) + return -1; + else if (t1->tv_sec == t2->tv_sec) { + if (t1->tv_nsec < t2->tv_nsec) + return -1; + else if (t1->tv_nsec == t2->tv_nsec) + return 0; + else + return 1; + } + else + return 1; +} + +int timespec_subtract(struct timespec* result, struct timespec* x, struct timespec* y) +{ + /* Perform the carry for the later subtraction by updating y. */ + if (x->tv_nsec < y->tv_nsec) { + int nsec = (y->tv_nsec - x->tv_nsec) / 1000000000 + 1; + y->tv_nsec -= 1000000000 * nsec; + y->tv_sec += nsec; + } + if (x->tv_nsec - y->tv_nsec > 1000000000) { + int nsec = (x->tv_nsec - y->tv_nsec) / 1000000000; + y->tv_nsec += 1000000000 * nsec; + y->tv_sec -= nsec; + } + + /* Compute the time remaining to wait. tv_nsec is certainly positive. */ + result->tv_sec = x->tv_sec - y->tv_sec; + result->tv_nsec = x->tv_nsec - y->tv_nsec; + + /* Return 1 if result is negative. */ + return x->tv_sec < y->tv_sec; +} + + +struct timespec add_msec_to_timespec(struct timespec ts, int msec) +{ + ts.tv_sec += msec / 1000; + ts.tv_nsec += (msec % 1000)*1000000; + if (ts.tv_nsec >= 1000000000) { // 10^9 + ts.tv_sec++; + ts.tv_nsec -= 1000000000; + } + return ts; +} + + +int align_with_existing_timeouts(timeout *t) +{ + GSList* it = timeout_list; + while (it) { + timeout* t2 = it->data; + if (t2->interval_msec > 0) { + if (t->interval_msec % t2->interval_msec == 0 || t2->interval_msec % t->interval_msec == 0) { + if (multi_timeouts == 0) + multi_timeouts = g_hash_table_new(0, 0); + if (!t->multi_timeout && !t2->multi_timeout) + // both timeouts can be aligned, but there is no multi timeout for them + create_multi_timeout(t, t2); + else + // there is already a multi timeout, so we append the new timeout to the multi timeout + append_multi_timeout(t, t2); + return 1; + } + } + it = it->next; + } + return 0; +} + + +int calc_multi_timeout_interval(multi_timeout_handler* mth) +{ + GSList* it = mth->timeout_list; + timeout* t = it->data; + int min_interval = t->interval_msec; + it = it->next; + while (it) { + t = it->data; + if (t->interval_msec < min_interval) + min_interval = t->interval_msec; + it = it->next; + } + return min_interval; +} + + +void create_multi_timeout(timeout* t1, timeout* t2) +{ + multi_timeout* mt1 = malloc(sizeof(multi_timeout)); + multi_timeout* mt2 = malloc(sizeof(multi_timeout)); + multi_timeout_handler* mth = malloc(sizeof(multi_timeout_handler)); + timeout* real_timeout = malloc(sizeof(timeout)); + + mth->timeout_list = 0; + mth->timeout_list = g_slist_prepend(mth->timeout_list, t1); + mth->timeout_list = g_slist_prepend(mth->timeout_list, t2); + mth->parent_timeout = real_timeout; + + g_hash_table_insert(multi_timeouts, t1, mth); + g_hash_table_insert(multi_timeouts, t2, mth); + g_hash_table_insert(multi_timeouts, real_timeout, mth); + + t1->multi_timeout = mt1; + t2->multi_timeout = mt2; + // set real_timeout->multi_timeout to something, such that we see in add_timeout_intern that + // it is already a multi_timeout (we never use it, except of checking for 0 ptr) + real_timeout->multi_timeout = (void*)real_timeout; + + timeout_list = g_slist_remove(timeout_list, t1); + timeout_list = g_slist_remove(timeout_list, t2); + + update_multi_timeout_values(mth); +} + + +void append_multi_timeout(timeout* t1, timeout* t2) +{ + if (t2->multi_timeout) { + // swap t1 and t2 such that t1 is the multi timeout + timeout* tmp = t2; + t2 = t1; + t1 = tmp; + } + + multi_timeout* mt = malloc(sizeof(multi_timeout)); + multi_timeout_handler* mth = g_hash_table_lookup(multi_timeouts, t1); + + mth->timeout_list = g_slist_prepend(mth->timeout_list, t2); + g_hash_table_insert(multi_timeouts, t2, mth); + + t2->multi_timeout = mt; + + update_multi_timeout_values(mth); +} + + +void update_multi_timeout_values(multi_timeout_handler* mth) +{ + int interval = calc_multi_timeout_interval(mth); + int next_timeout_msec = interval; + + struct timespec cur_time; + clock_gettime(CLOCK_MONOTONIC, &cur_time); + + GSList* it = mth->timeout_list; + struct timespec diff_time; + while (it) { + timeout* t = it->data; + t->multi_timeout->count_to_expiration = t->interval_msec / interval; + timespec_subtract(&diff_time, &t->timeout_expires, &cur_time); + int msec_to_expiration = diff_time.tv_sec*1000 + diff_time.tv_nsec/1000000; + int count_left = msec_to_expiration / interval + (msec_to_expiration%interval != 0); + t->multi_timeout->current_count = t->multi_timeout->count_to_expiration - count_left; + if (msec_to_expiration < next_timeout_msec) + next_timeout_msec = msec_to_expiration; + it = it->next; + } + + mth->parent_timeout->interval_msec = interval; + timeout_list = g_slist_remove(timeout_list, mth->parent_timeout); + add_timeout_intern(next_timeout_msec, interval, callback_multi_timeout, mth, mth->parent_timeout); +} + + +void callback_multi_timeout(void* arg) +{ + multi_timeout_handler* mth = arg; + struct timespec cur_time; + clock_gettime(CLOCK_MONOTONIC, &cur_time); + GSList* it = mth->timeout_list; + while (it) { + timeout* t = it->data; + if (++t->multi_timeout->current_count >= t->multi_timeout->count_to_expiration) { + t->_callback(t->arg); + t->multi_timeout->current_count = 0; + t->timeout_expires = add_msec_to_timespec(cur_time, t->interval_msec); + } + it = it->next; + } +} + + +void remove_from_multi_timeout(timeout* t) +{ + multi_timeout_handler* mth = g_hash_table_lookup(multi_timeouts, t); + g_hash_table_remove(multi_timeouts, t); + + mth->timeout_list = g_slist_remove(mth->timeout_list, t); + free(t->multi_timeout); + t->multi_timeout = 0; + + if (g_slist_length(mth->timeout_list) == 1) { + timeout* last_timeout = mth->timeout_list->data; + free(last_timeout->multi_timeout); + last_timeout->multi_timeout = 0; + g_hash_table_remove(multi_timeouts, last_timeout); + g_hash_table_remove(multi_timeouts, mth->parent_timeout); + mth->parent_timeout->multi_timeout = 0; + stop_timeout(mth->parent_timeout); + free(mth); + + struct timespec cur_time, diff_time; + clock_gettime(CLOCK_MONOTONIC, &cur_time); + timespec_subtract(&diff_time, &t->timeout_expires, &cur_time); + int msec_to_expiration = diff_time.tv_sec*1000 + diff_time.tv_nsec/1000000; + add_timeout_intern(msec_to_expiration, last_timeout->interval_msec, last_timeout->_callback, last_timeout->arg, last_timeout); + } + else + update_multi_timeout_values(mth); +} + + +void stop_multi_timeout(timeout* t) +{ + multi_timeout_handler* mth = g_hash_table_lookup(multi_timeouts, t); + g_hash_table_remove(multi_timeouts, mth->parent_timeout); + while (mth->timeout_list) { + timeout* t1 = mth->timeout_list->data; + mth->timeout_list = g_slist_remove(mth->timeout_list, t1); + g_hash_table_remove(multi_timeouts, t1); + free(t1->multi_timeout); + free(t1); + } + free(mth); +} diff -Nru tint2-0.7.1/src/util/timer.h tint2-0.9/src/util/timer.h --- tint2-0.7.1/src/util/timer.h 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/util/timer.h 2010-01-09 00:11:01.000000000 +0000 @@ -0,0 +1,60 @@ +/************************************************************************** +* +* Copyright (C) 2009 Andreas.Fink (Andreas.Fink85@gmail.com) +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License version 2 +* as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +**************************************************************************/ + + +#ifndef TIMER_H +#define TIMER_H + +#include + +extern GSList* timeout_list; +extern struct timeval next_timeout; + + +typedef struct _timeout timeout; + + +// timer functions +/** + * Single shot timer (i.e. timer with interval_msec == 0) are deleted automatically as soon as they expire + * i.e. you do not need to stop them, however it is safe to call stop_timeout for these timers. + * Periodic timeouts are aligned to each other whenever possible, i.e. one interval_msec is an + * integral multiple of the other. +**/ + +/** installs a timeout with the first timeout of 'value_msec' and then a periodic timeout with + * 'interval_msec'. '_callback' is the callback function when the timer reaches the timeout. + * returns a pointer to the timeout, which is needed for stopping it again +**/ +timeout* add_timeout(int value_msec, int interval_msec, void (*_callback)(void*), void* arg); + +/** changes timeout 't'. If timeout 't' does not exist, nothing happens **/ +void change_timeout(timeout* t, int value_msec, int interval_msec, void (*_callback)(void*), void* arg); + +/** stops the timeout 't' **/ +void stop_timeout(timeout* t); + +/** stops all timeouts **/ +void stop_all_timeouts(); + +/** update_next_timeout updates next_timeout to the value, when the next installed timeout will expire **/ +void update_next_timeout(); + +/** Callback of all expired timeouts **/ +void callback_timeout_expired(); + +#endif // TIMER_H diff -Nru tint2-0.7.1/src/util/window.c tint2-0.9/src/util/window.c --- tint2-0.7.1/src/util/window.c 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/util/window.c 2010-01-26 23:00:27.000000000 +0000 @@ -33,84 +33,77 @@ #include "window.h" #include "server.h" #include "panel.h" +#include "taskbar.h" void set_active (Window win) { - send_event32 (win, server.atom._NET_ACTIVE_WINDOW, 2, CurrentTime, 0); + send_event32 (win, server.atom._NET_ACTIVE_WINDOW, 2, CurrentTime, 0); } void set_desktop (int desktop) { - send_event32 (server.root_win, server.atom._NET_CURRENT_DESKTOP, desktop, 0, 0); + send_event32 (server.root_win, server.atom._NET_CURRENT_DESKTOP, desktop, 0, 0); } void windows_set_desktop (Window win, int desktop) { - send_event32 (win, server.atom._NET_WM_DESKTOP, desktop, 2, 0); + send_event32 (win, server.atom._NET_WM_DESKTOP, desktop, 2, 0); } void set_close (Window win) { - send_event32 (win, server.atom._NET_CLOSE_WINDOW, 0, 2, 0); + send_event32 (win, server.atom._NET_CLOSE_WINDOW, 0, 2, 0); } void window_toggle_shade (Window win) { - send_event32 (win, server.atom._NET_WM_STATE, 2, server.atom._NET_WM_STATE_SHADED, 0); + send_event32 (win, server.atom._NET_WM_STATE, 2, server.atom._NET_WM_STATE_SHADED, 0); } -/* -int x11_send_expose(Display *dpy, Window dst, int x, int y, int width, int height) + +void window_maximize_restore (Window win) { - XEvent xe; - int rc; - xe.type = Expose; - xe.xexpose.window = dst; - xe.xexpose.x = x; - xe.xexpose.y = y; - xe.xexpose.width = width; - xe.xexpose.height = height; - xe.xexpose.count = 0; - rc = XSendEvent(tray_data.dpy, dst, True, NoEventMask, &xe); - return x11_ok() && rc != 0; + send_event32 (win, server.atom._NET_WM_STATE, 2, server.atom._NET_WM_STATE_MAXIMIZED_VERT, 0); + send_event32 (win, server.atom._NET_WM_STATE, 2, server.atom._NET_WM_STATE_MAXIMIZED_HORZ, 0); } -*/ + int window_is_hidden (Window win) { - Window window; - Atom *at; - int count, i; - - if (XGetTransientForHint(server.dsp, win, &window) != 0) { - if (window) { - return 1; - } - } - - at = server_get_property (win, server.atom._NET_WM_STATE, XA_ATOM, &count); - for (i = 0; i < count; i++) { - if (at[i] == server.atom._NET_WM_STATE_SKIP_TASKBAR) { - XFree(at); - return 1; - } - } - XFree(at); - - at = server_get_property (win, server.atom._NET_WM_WINDOW_TYPE, XA_ATOM, &count); - for (i = 0; i < count; i++) { - if (at[i] == server.atom._NET_WM_WINDOW_TYPE_DOCK || at[i] == server.atom._NET_WM_WINDOW_TYPE_DESKTOP || at[i] == server.atom._NET_WM_WINDOW_TYPE_TOOLBAR || at[i] == server.atom._NET_WM_WINDOW_TYPE_MENU || at[i] == server.atom._NET_WM_WINDOW_TYPE_SPLASH) { - XFree(at); - return 1; - } - } - XFree(at); + Window window; + Atom *at; + int count, i; + + at = server_get_property (win, server.atom._NET_WM_STATE, XA_ATOM, &count); + for (i = 0; i < count; i++) { + if (at[i] == server.atom._NET_WM_STATE_SKIP_TASKBAR) { + XFree(at); + return 1; + } + if (at[i] == server.atom._NET_WM_STATE_MODAL) { + // do not add modal windows if the transient window is already in the taskbar + if ( XGetTransientForHint(server.dsp, win, &window) && task_get_tasks(window) ) { + XFree(at); + return 1; + } + } + } + XFree(at); + + at = server_get_property (win, server.atom._NET_WM_WINDOW_TYPE, XA_ATOM, &count); + for (i = 0; i < count; i++) { + if (at[i] == server.atom._NET_WM_WINDOW_TYPE_DOCK || at[i] == server.atom._NET_WM_WINDOW_TYPE_DESKTOP || at[i] == server.atom._NET_WM_WINDOW_TYPE_TOOLBAR || at[i] == server.atom._NET_WM_WINDOW_TYPE_MENU || at[i] == server.atom._NET_WM_WINDOW_TYPE_SPLASH) { + XFree(at); + return 1; + } + } + XFree(at); for (i=0 ; i < nb_panel ; i++) { if (panel1[i].main_win == win) { @@ -118,172 +111,201 @@ } } - // specification - // Windows with neither _NET_WM_WINDOW_TYPE nor WM_TRANSIENT_FOR set - // MUST be taken as top-level window. - return 0; + // specification + // Windows with neither _NET_WM_WINDOW_TYPE nor WM_TRANSIENT_FOR set + // MUST be taken as top-level window. + return 0; } int window_get_desktop (Window win) { - return get_property32(win, server.atom._NET_WM_DESKTOP, XA_CARDINAL); + return get_property32(win, server.atom._NET_WM_DESKTOP, XA_CARDINAL); } int window_get_monitor (Window win) { - int i, x, y; - Window src; + int i, x, y; + Window src; + + XTranslateCoordinates(server.dsp, win, server.root_win, 0, 0, &x, &y, &src); + x += 2; + y += 2; + for (i = 0; i < server.nb_monitor; i++) { + if (x >= server.monitor[i].x && x <= (server.monitor[i].x + server.monitor[i].width)) + if (y >= server.monitor[i].y && y <= (server.monitor[i].y + server.monitor[i].height)) + break; + } - XTranslateCoordinates(server.dsp, win, server.root_win, 0, 0, &x, &y, &src); - x += 2; - y += 2; - for (i = 0; i < server.nb_monitor; i++) { - if (x >= server.monitor[i].x && x <= (server.monitor[i].x + server.monitor[i].width)) - if (y >= server.monitor[i].y && y <= (server.monitor[i].y + server.monitor[i].height)) - break; - } - - //printf("window %lx : ecran %d, (%d, %d)\n", win, i, x, y); - if (i == server.nb_monitor) return 0; - else return i; + //printf("window %lx : ecran %d, (%d, %d)\n", win, i, x, y); + if (i == server.nb_monitor) return 0; + else return i; } int window_is_iconified (Window win) { - return (IconicState == get_property32(win, server.atom.WM_STATE, server.atom.WM_STATE)); + // EWMH specification : minimization of windows use _NET_WM_STATE_HIDDEN. + // WM_STATE is not accurate for shaded window and in multi_desktop mode. + Atom *at; + int count, i; + at = server_get_property (win, server.atom._NET_WM_STATE, XA_ATOM, &count); + for (i = 0; i < count; i++) { + if (at[i] == server.atom._NET_WM_STATE_HIDDEN) { + XFree(at); + return 1; + } + } + XFree(at); + return 0; } int window_is_urgent (Window win) { - Atom *at; - int count, i; + Atom *at; + int count, i; - at = server_get_property (win, server.atom._NET_WM_STATE, XA_ATOM, &count); - for (i = 0; i < count; i++) { - if (at[i] == server.atom._NET_WM_STATE_DEMANDS_ATTENTION) { - XFree(at); - return 1; - } - } - XFree(at); + at = server_get_property (win, server.atom._NET_WM_STATE, XA_ATOM, &count); + for (i = 0; i < count; i++) { + if (at[i] == server.atom._NET_WM_STATE_DEMANDS_ATTENTION) { + XFree(at); + return 1; + } + } + XFree(at); + return 0; +} + + +int window_is_skip_taskbar (Window win) +{ + Atom *at; + int count, i; + + at = server_get_property(win, server.atom._NET_WM_STATE, XA_ATOM, &count); + for (i=0; i num || w * h == 0) break; - count++; - } + count = 0; + pos = 0; + while (pos < num) { + w = data[pos++]; + h = data[pos++]; + pos += w * h; + if (pos > num || w * h == 0) break; + count++; + } - return count; + return count; } long *get_best_icon (long *data, int icon_count, int num, int *iw, int *ih, int best_icon_size) { - int width[icon_count], height[icon_count], pos, i, w, h; - long *icon_data[icon_count]; + int width[icon_count], height[icon_count], pos, i, w, h; + long *icon_data[icon_count]; + + /* List up icons */ + pos = 0; + i = icon_count; + while (i--) { + w = data[pos++]; + h = data[pos++]; + if (pos + w * h > num) break; + + width[i] = w; + height[i] = h; + icon_data[i] = &data[pos]; + + pos += w * h; + } + + /* Try to find exact size */ + int icon_num = -1; + for (i = 0; i < icon_count; i++) { + if (width[i] == best_icon_size) { + icon_num = i; + break; + } + } + + /* Take the biggest or whatever */ + if (icon_num < 0) { + int highest = 0; + for (i = 0; i < icon_count; i++) { + if (width[i] > highest) { + icon_num = i; + highest = width[i]; + } + } + } - /* List up icons */ - pos = 0; - i = icon_count; - while (i--) { - w = data[pos++]; - h = data[pos++]; - if (pos + w * h > num) break; - - width[i] = w; - height[i] = h; - icon_data[i] = &data[pos]; - - pos += w * h; - } - - /* Try to find exact size */ - int icon_num = -1; - for (i = 0; i < icon_count; i++) { - if (width[i] == best_icon_size) { - icon_num = i; - break; - } - } - - /* Take the biggest or whatever */ - if (icon_num < 0) { - int highest = 0; - for (i = 0; i < icon_count; i++) { - if (width[i] > highest) { - icon_num = i; - highest = width[i]; - } - } - } - - *iw = width[icon_num]; - *ih = height[icon_num]; - return icon_data[icon_num]; + *iw = width[icon_num]; + *ih = height[icon_num]; + return icon_data[icon_num]; } void get_text_size(PangoFontDescription *font, int *height_ink, int *height, int panel_height, char *text, int len) { - PangoRectangle rect_ink, rect; + PangoRectangle rect_ink, rect; - Pixmap pmap = XCreatePixmap (server.dsp, server.root_win, panel_height, panel_height, server.depth); + Pixmap pmap = XCreatePixmap (server.dsp, server.root_win, panel_height, panel_height, server.depth); - cairo_surface_t *cs = cairo_xlib_surface_create (server.dsp, pmap, server.visual, panel_height, panel_height); - cairo_t *c = cairo_create (cs); + cairo_surface_t *cs = cairo_xlib_surface_create (server.dsp, pmap, server.visual, panel_height, panel_height); + cairo_t *c = cairo_create (cs); - PangoLayout *layout = pango_cairo_create_layout (c); - pango_layout_set_font_description (layout, font); - pango_layout_set_text (layout, text, len); - - pango_layout_get_pixel_extents(layout, &rect_ink, &rect); - *height_ink = rect_ink.height; - *height = rect.height; - //printf("dimension : %d - %d\n", rect_ink.height, rect.height); - - g_object_unref (layout); - cairo_destroy (c); - cairo_surface_destroy (cs); - XFreePixmap (server.dsp, pmap); + PangoLayout *layout = pango_cairo_create_layout (c); + pango_layout_set_font_description (layout, font); + pango_layout_set_text (layout, text, len); + + pango_layout_get_pixel_extents(layout, &rect_ink, &rect); + *height_ink = rect_ink.height; + *height = rect.height; + //printf("dimension : %d - %d\n", rect_ink.height, rect.height); + + g_object_unref (layout); + cairo_destroy (c); + cairo_surface_destroy (cs); + XFreePixmap (server.dsp, pmap); } diff -Nru tint2-0.7.1/src/util/window.h tint2-0.9/src/util/window.h --- tint2-0.7.1/src/util/window.h 2009-07-19 21:28:52.000000000 +0100 +++ tint2-0.9/src/util/window.h 2009-09-07 22:41:21.000000000 +0100 @@ -21,8 +21,10 @@ int window_is_urgent (Window win); int window_is_hidden (Window win); int window_is_active (Window win); +int window_is_skip_taskbar (Window win); int get_icon_count (long *data, int num); long *get_best_icon (long *data, int icon_count, int num, int *iw, int *ih, int best_icon_size); +void window_maximize_restore (Window win); void window_toggle_shade (Window win); int window_get_desktop (Window win); void windows_set_desktop (Window win, int desktop); diff -Nru tint2-0.7.1/src/version.h.in tint2-0.9/src/version.h.in --- tint2-0.7.1/src/version.h.in 1970-01-01 01:00:00.000000000 +0100 +++ tint2-0.9/src/version.h.in 2010-01-15 20:51:10.000000000 +0000 @@ -0,0 +1,3 @@ + +#define VERSION_STRING "@PACKAGE_VERSION@" + diff -Nru tint2-0.7.1/tint2rc tint2-0.9/tint2rc --- tint2-0.7.1/tint2rc 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/tint2rc 1970-01-01 01:00:00.000000000 +0100 @@ -1,96 +0,0 @@ -#--------------------------------------------- -# TINT2 CONFIG FILE -#--------------------------------------------- - -#--------------------------------------------- -# BACKGROUND AND BORDER -#--------------------------------------------- -rounded = 7 -border_width = 2 -background_color = #000000 60 -border_color = #ffffff 18 - -rounded = 5 -border_width = 0 -background_color = #ffffff 40 -border_color = #ffffff 50 - -rounded = 5 -border_width = 0 -background_color = #ffffff 18 -border_color = #ffffff 70 - -#--------------------------------------------- -# PANEL -#--------------------------------------------- -panel_monitor = all -panel_position = bottom center -panel_size = 94% 30 -panel_margin = 0 0 -panel_padding = 7 0 -font_shadow = 0 -panel_background_id = 1 -wm_menu = 0 - -#--------------------------------------------- -# TASKBAR -#--------------------------------------------- -#taskbar_mode = multi_desktop -taskbar_mode = single_desktop -taskbar_padding = 2 3 2 -taskbar_background_id = 0 - -#--------------------------------------------- -# TASKS -#--------------------------------------------- -task_icon = 1 -task_text = 1 -task_width = 140 -task_centered = 1 -task_padding = 6 3 -task_font = sans 7 -task_font_color = #ffffff 70 -task_active_font_color = #ffffff 85 -task_background_id = 3 -task_active_background_id = 2 - -#--------------------------------------------- -# SYSTRAYBAR -#--------------------------------------------- -systray_padding = 0 4 5 -systray_background_id = 0 - -#--------------------------------------------- -# CLOCK -#--------------------------------------------- -time1_format = %H:%M -time1_font = sans 8 -time2_format = %A %d %B -time2_font = sans 6 -clock_font_color = #ffffff 76 -clock_padding = 1 0 -clock_background_id = 0 -#clock_lclick_command = xclock -clock_rclick_command = orage - -#--------------------------------------------- -# BATTERY -#--------------------------------------------- -battery = 0 -battery_low_status = 10 -battery_low_cmd = notify-send "battery low" -bat1_font = sans 8 -bat2_font = sans 6 -battery_font_color = #ffffff 76 -battery_padding = 1 0 -battery_background_id = 0 - - -#--------------------------------------------- -# MOUSE ACTION ON TASK -#--------------------------------------------- -mouse_middle = none -mouse_right = close -mouse_scroll_up = toggle -mouse_scroll_down = iconify - diff -Nru tint2-0.7.1/tintrc01 tint2-0.9/tintrc01 --- tint2-0.7.1/tintrc01 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/tintrc01 1970-01-01 01:00:00.000000000 +0100 @@ -1,97 +0,0 @@ -#--------------------------------------------- -# TINT2 CONFIG FILE -#--------------------------------------------- - -#--------------------------------------------- -# BACKGROUND AND BORDER -#--------------------------------------------- -rounded = 7 -border_width = 2 -background_color = #000000 60 -border_color = #ffffff 18 - -rounded = 5 -border_width = 0 -background_color = #ffffff 40 -border_color = #ffffff 50 - -rounded = 5 -border_width = 0 -background_color = #ffffff 18 -border_color = #ffffff 70 - -#--------------------------------------------- -# PANEL -#--------------------------------------------- -panel_monitor = all -panel_position = bottom center horizontal -#panel_position = center left vertical -panel_size = 94% 30 -panel_margin = 0 0 -panel_padding = 7 0 -font_shadow = 0 -panel_background_id = 1 -wm_menu = 0 - -#--------------------------------------------- -# TASKBAR -#--------------------------------------------- -#taskbar_mode = multi_desktop -taskbar_mode = single_desktop -taskbar_padding = 2 3 2 -taskbar_background_id = 0 - -#--------------------------------------------- -# TASKS -#--------------------------------------------- -task_icon = 1 -task_text = 1 -task_maximum_size = 140 30 -task_centered = 1 -task_padding = 6 3 -task_font = sans 7 -task_font_color = #ffffff 70 -task_active_font_color = #ffffff 85 -task_background_id = 3 -task_active_background_id = 2 - -#--------------------------------------------- -# SYSTRAYBAR -#--------------------------------------------- -systray_padding = 0 4 5 -systray_background_id = 0 - -#--------------------------------------------- -# CLOCK -#--------------------------------------------- -time1_format = %H:%M -time1_font = sans 8 -time2_format = %A %d %B -time2_font = sans 6 -clock_font_color = #ffffff 76 -clock_padding = 1 0 -clock_background_id = 0 -#clock_lclick_command = xclock -clock_rclick_command = orage - -#--------------------------------------------- -# BATTERY -#--------------------------------------------- -battery = 0 -battery_low_status = 10 -battery_low_cmd = notify-send "battery low" -bat1_font = sans 8 -bat2_font = sans 6 -battery_font_color = #ffffff 76 -battery_padding = 1 0 -battery_background_id = 0 - - -#--------------------------------------------- -# MOUSE ACTION ON TASK -#--------------------------------------------- -mouse_middle = none -mouse_right = close -mouse_scroll_up = toggle -mouse_scroll_down = iconify - diff -Nru tint2-0.7.1/tintrc02 tint2-0.9/tintrc02 --- tint2-0.7.1/tintrc02 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/tintrc02 1970-01-01 01:00:00.000000000 +0100 @@ -1,95 +0,0 @@ -#--------------------------------------------- -# TINT2 CONFIG FILE -#--------------------------------------------- - -#--------------------------------------------- -# BACKGROUND AND BORDER -#--------------------------------------------- -rounded = 1 -border_width = 0 -background_color = #282828 60 -border_color = #000000 0 - -rounded = 1 -border_width = 1 -background_color = #cccccc 0 -border_color = #cccccc 55 - -rounded = 1 -border_width = 0 -background_color = #cccccc 20 -border_color = #cccccc 40 - -#--------------------------------------------- -# PANEL -#--------------------------------------------- -panel_monitor = all -panel_position = bottom center -panel_size = 95% 30 -panel_margin = 0 0 -panel_padding = 7 3 7 -font_shadow = 0 -panel_background_id = 1 -wm_menu = 0 - -#--------------------------------------------- -# TASKBAR -#--------------------------------------------- -taskbar_mode = multi_desktop -#taskbar_mode = single_desktop -taskbar_padding = 0 0 0 -taskbar_background_id = 2 - -#--------------------------------------------- -# TASKS -#--------------------------------------------- -task_icon = 1 -task_text = 0 -task_maximum_size = 34 34 -task_centered = 1 -task_padding = 2 3 -task_font = sans 8 -task_font_color = #ffffff 60 -task_active_font_color = #ffffff 100 -task_background_id = 0 -task_active_background_id = 3 - -#--------------------------------------------- -# SYSTRAYBAR -#--------------------------------------------- -systray_padding = 0 4 3 -systray_background_id = 0 - -#--------------------------------------------- -# CLOCK -#--------------------------------------------- -time1_format = %H:%M -time1_font = sans 7 -time2_format = %A %d %B -time2_font = sans 7 -clock_font_color = #ffffff 100 -clock_padding = 1 0 -clock_background_id = 0 -#clock_lclick_command = xclock -clock_rclick_command = orage - -#--------------------------------------------- -# BATTERY -#--------------------------------------------- -battery = 1 -battery_low_status = 10 -battery_low_cmd = notify-send "battery low" -bat1_font = sans 7 -bat2_font = sans 7 -battery_font_color = #ffffff 100 -battery_padding = 1 0 -battery_background_id = 0 - -#--------------------------------------------- -# MOUSE ACTION ON TASK -#--------------------------------------------- -mouse_middle = none -mouse_right = close -mouse_scroll_up = toggle -mouse_scroll_down = iconify - diff -Nru tint2-0.7.1/tintrc03 tint2-0.9/tintrc03 --- tint2-0.7.1/tintrc03 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/tintrc03 1970-01-01 01:00:00.000000000 +0100 @@ -1,90 +0,0 @@ -#--------------------------------------------- -# TINT2 CONFIG FILE -#--------------------------------------------- - -#--------------------------------------------- -# BACKGROUND AND BORDER -#--------------------------------------------- -rounded = 3 -border_width = 1 -background_color = #000000 40 -border_color = #d1d1d1 34 - -rounded = 3 -border_width = 1 -background_color = #000000 55 -border_color = #d1d1d1 40 - -#--------------------------------------------- -# PANEL -#--------------------------------------------- -panel_monitor = all -panel_position = bottom center -panel_size = 97% 26 -panel_margin = 0 0 -panel_padding = 0 2 5 -font_shadow = 0 -panel_background_id = 0 -wm_menu = 0 - -#--------------------------------------------- -# TASKBAR -#--------------------------------------------- -#taskbar_mode = multi_desktop -taskbar_mode = single_desktop -taskbar_padding = 0 0 5 -taskbar_background_id = 0 - -#--------------------------------------------- -# TASKS -#--------------------------------------------- -task_icon = 0 -task_text = 1 -task_maximum_size = 160 30 -task_centered = 1 -task_padding = 3 1 -task_font = sans bold 7.5 -task_font_color = #ffffff 60 -task_active_font_color = #ffffff 90 -task_background_id = 1 -task_active_background_id = 2 - -#--------------------------------------------- -# SYSTRAYBAR -#--------------------------------------------- -systray_padding = 6 2 6 -systray_background_id = 1 - -#--------------------------------------------- -# CLOCK -#--------------------------------------------- -#time1_format = %a %d %H:%M -time1_font = sans bold 7.5 -#time2_format = %A %d %B -time2_font = sans bold 7.5 -clock_font_color = #ffffff 60 -clock_padding = 5 0 -clock_background_id = 1 -#clock_lclick_command = xclock -clock_rclick_command = orage - -#--------------------------------------------- -# BATTERY -#--------------------------------------------- -battery = 0 -battery_low_status = 10 -battery_low_cmd = notify-send "battery low" -bat1_font = sans 7 -bat2_font = sans 7 -battery_font_color = #ffffff 100 -battery_padding = 1 0 -battery_background_id = 0 - -#--------------------------------------------- -# MOUSE ACTION ON TASK -#--------------------------------------------- -mouse_middle = none -mouse_right = close -mouse_scroll_up = toggle -mouse_scroll_down = iconify - diff -Nru tint2-0.7.1/tintrc04 tint2-0.9/tintrc04 --- tint2-0.7.1/tintrc04 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/tintrc04 1970-01-01 01:00:00.000000000 +0100 @@ -1,90 +0,0 @@ -#--------------------------------------------- -# TINT2 CONFIG FILE -#--------------------------------------------- - -#--------------------------------------------- -# BACKGROUND AND BORDER -#--------------------------------------------- -rounded = 1 -border_width = 0 -background_color = #282828 100 -border_color = #000000 0 - -rounded = 1 -border_width = 0 -background_color = #f6b655 90 -border_color = #cccccc 40 - -#--------------------------------------------- -# PANEL -#--------------------------------------------- -panel_monitor = all -panel_position = bottom center -panel_size = 100% 22 -panel_margin = 0 0 -panel_padding = 0 0 0 -font_shadow = 0 -panel_background_id = 1 -wm_menu = 0 - -#--------------------------------------------- -# TASKBAR -#--------------------------------------------- -#taskbar_mode = multi_desktop -taskbar_mode = single_desktop -taskbar_padding = 0 0 0 -taskbar_background_id = 0 - -#--------------------------------------------- -# TASKS -#--------------------------------------------- -task_icon = 0 -task_text = 1 -task_maximum_size = 160 30 -task_centered = 1 -task_padding = 5 0 -task_font = sans 7.5 -task_font_color = #ffffff 60 -task_active_font_color = #000000 100 -task_background_id = 0 -task_active_background_id = 2 - -#--------------------------------------------- -# SYSTRAYBAR -#--------------------------------------------- -systray_padding = 4 3 4 -systray_background_id = 0 - -#--------------------------------------------- -# CLOCK -#--------------------------------------------- -time1_format = %H:%M -time1_font = sans 13 -#time2_format = %A %d %B -time2_font = sans 7 -clock_font_color = #ffffff 90 -clock_padding = 4 0 -clock_background_id = 0 -#clock_lclick_command = xclock -clock_rclick_command = orage - -#--------------------------------------------- -# BATTERY -#--------------------------------------------- -battery = 0 -battery_low_status = 10 -battery_low_cmd = notify-send "battery low" -bat1_font = sans 8 -bat2_font = sans 6 -battery_font_color = #ffffff 100 -battery_padding = 1 0 -battery_background_id = 0 - -#--------------------------------------------- -# MOUSE ACTION ON TASK -#--------------------------------------------- -mouse_middle = none -mouse_right = close -mouse_scroll_up = toggle -mouse_scroll_down = iconify - diff -Nru tint2-0.7.1/tintrc05 tint2-0.9/tintrc05 --- tint2-0.7.1/tintrc05 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/tintrc05 1970-01-01 01:00:00.000000000 +0100 @@ -1,98 +0,0 @@ -#--------------------------------------------- -# TINT2 CONFIG FILE -#--------------------------------------------- - -#--------------------------------------------- -# BACKGROUND AND BORDER -#--------------------------------------------- -rounded = 0 -border_width = 0 -background_color = #000000 60 -border_color = #d1d1d1 34 - -rounded = 3 -border_width = 1 -background_color = #96b3a9 60 -border_color = #d1d1d1 70 - -rounded = 2 -border_width = 0 -background_color = #707070 40 -border_color = #d1d1d1 40 - -#--------------------------------------------- -# PANEL -#--------------------------------------------- -panel_monitor = all -panel_position = center left vertical -#panel_position = bottom center horizontal -panel_size = 90% 85 -panel_margin = 0 0 -panel_padding = 10 3 10 -font_shadow = 0 -panel_background_id = 0 -wm_menu = 1 - -#--------------------------------------------- -# TASKBAR -#--------------------------------------------- -taskbar_mode = multi_desktop -#taskbar_mode = single_desktop -taskbar_padding = 0 0 0 -taskbar_background_id = 2 - -#--------------------------------------------- -# TASKS -#--------------------------------------------- -task_icon = 0 -task_text = 1 -task_maximum_size = 120 26 -task_centered = 1 -task_padding = 1 5 -task_font = sans 7.5 -task_font_color = #ffffff 80 -task_active_font_color = #ffffff 100 -task_background_id = 0 -task_active_background_id = 3 - -#--------------------------------------------- -# SYSTRAYBAR -#--------------------------------------------- -systray_padding = 0 28 2 -systray_background_id = 0 - -#--------------------------------------------- -# CLOCK -#--------------------------------------------- -time1_format = %H:%M -time1_font = sans bold 8 -#time2_format = %A %d %B -time2_format = %A %d -time2_font = sans 7 -clock_font_color = #ffffff 90 -clock_padding = 4 2 -clock_background_id = 2 -clock_lclick_command = xclock -clock_rclick_command = orage - -#--------------------------------------------- -# BATTERY -#--------------------------------------------- -battery = 0 -battery_low_status = 10 -battery_low_cmd = notify-send "battery low" -bat1_font = sans bold 7 -bat2_font = sans 7 -battery_font_color = #ffffff 90 -battery_padding = 0 0 -battery_background_id = 2 - -#--------------------------------------------- -# MOUSE ACTION ON TASK -#--------------------------------------------- -mouse_middle = none -mouse_right = close -mouse_scroll_up = toggle -mouse_scroll_down = iconify - - diff -Nru tint2-0.7.1/tintrc06 tint2-0.9/tintrc06 --- tint2-0.7.1/tintrc06 2009-07-19 21:28:53.000000000 +0100 +++ tint2-0.9/tintrc06 1970-01-01 01:00:00.000000000 +0100 @@ -1,102 +0,0 @@ -#--------------------------------------------- -# TINT2 CONFIG FILE -#--------------------------------------------- - -#--------------------------------------------- -# BACKGROUND AND BORDER -#--------------------------------------------- -rounded = 1 -border_width = 0 -background_color = #cae2dd 40 -border_color = #d1d1d1 34 - -rounded = 1 -border_width = 1 -background_color = #000000 0 -border_color = #ffffff 60 - -rounded = 1 -border_width = 0 -background_color = #000000 15 -border_color = #ffffff 0 - -rounded = 1 -border_width = 0 -background_color = #cae2dd 50 -border_color = #d1d1d1 34 - - -#--------------------------------------------- -# PANEL -#--------------------------------------------- -panel_monitor = all -panel_position = center left vertical -#panel_position = bottom center -panel_size = 90% 50 -panel_margin = 0 0 -panel_padding = 7 3 5 -font_shadow = 0 -panel_background_id = 1 -wm_menu = 1 - -#--------------------------------------------- -# TASKBAR -#--------------------------------------------- -taskbar_mode = multi_desktop -#taskbar_mode = single_desktop -taskbar_padding = 0 0 0 -taskbar_background_id = 2 - -#--------------------------------------------- -# TASKS -#--------------------------------------------- -task_icon = 1 -task_text = 0 -task_maximum_size = 120 30 -task_centered = 1 -task_padding = 4 6 -task_font = sans bold 7.5 -task_font_color = #ffffff 70 -task_active_font_color = #ffffff 100 -task_background_id = 0 -task_active_background_id = 3 - -#--------------------------------------------- -# SYSTRAYBAR -#--------------------------------------------- -systray_padding = 4 10 2 -systray_background_id = 0 - -#--------------------------------------------- -# CLOCK -#--------------------------------------------- -time1_format = %H:%M -time1_font = sans 8 -time2_format = %d %b -time2_font = sans 7 -clock_font_color = #000000 90 -clock_padding = 4 2 -clock_background_id = 4 -clock_lclick_command = xclock -clock_rclick_command = orage - -#--------------------------------------------- -# BATTERY -#--------------------------------------------- -battery = 0 -battery_low_status = 10 -battery_low_cmd = notify-send "battery low" -bat1_font = sans bold 7 -bat2_font = sans 7 -battery_font_color = #ffffff 60 -battery_padding = 0 0 -battery_background_id = 0 - -#--------------------------------------------- -# MOUSE ACTION ON TASK -#--------------------------------------------- -mouse_middle = none -mouse_right = close -mouse_scroll_up = toggle -mouse_scroll_down = iconify -