mdadm (3.2.5-5ubuntu1) raring; urgency=low
* Implement plymouth hooks for degraded RAID questions. (LP: #1102499)
* Merged Intel Matrix Storage initramfs support.
* Merge from Debian, remaining delta is still the same:
- Call checks in local-premount to avoid race condition with udev
and opening a degraded array.
- debian/initramfs/local-premount: add call wait_for_udev to wait a
little longer for RAID devices to appear (LP: #942106)
- d/initramfs/mdadm-functions: Record in /run when boot-degraded
question has been asked so that it is only asked once
- pass --test to mdadm to enable result codes for degraded arrays.
- debian/control: we need udev and util-linux in the right version. We
also remove the build dependency from quilt and docbook-to-man as both
are not used in Ubuntus mdadm.
- debian/initramfs/hook: kept the Ubuntus version for handling the absence
of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
- debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
- debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
unused startall script
- debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
instead. Resolved merge conflict by keeping Ubuntu's version.
- debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
boot-degraded enablement; maintain udev starting of RAID devices;
init-premount hook script for the initramfs, to provide information at
boot
- debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
- debian/rules: Kept Ubuntus version for installing apport hooks, not
installing un-used startall script.
- debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
installer changes
- debian/presubj: Dropped this unused bug reporting file. Instead use
source_mdadm.py act as an apport hook for bug handling.
- d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
incrementally adds mdadm member when detected. Starting such an
array in degraded mode is possible by mdadm -IRs. Using mdadm
-ARs without stopping the array first does nothing when no
mdarray-unassociated device is available. Using mdadm -IRs to
start a previously partially assembled array through incremental
mode. Keeping the mdadm -ARs for assembling arrays which were for
some reason not assembled through incremental mode (i.e through
mdadm's udev rule).
- udev-md-raid.rules to not auto-start arrays based on detection
of ddf or isw (imsm) signatures; this conflicts with dmraid usage in
precise and requires more analysis before it can be enabled in SRU.
* Merged in Debian:
- Copy udev rule from /etc/udev/rules.d/ as well as the
/lib/udev/rules.d/, to allow local administrator to override mdadm
rules file.
mdadm (3.2.5-5) unstable; urgency=low
* add (empty) restart and force-reload actions to mdadm-waitidle
script -- this script is used only when the system needs to be
shut down or rebooted, there's nothing to start or restart.
mdadm (3.2.5-4+mdmon) experimental; urgency=low
* fix `/etc/init.d/mdadm-raid status' inverse logic (Closes: #686100)
* /etc/init.d/mdadm: change RUNDIR to /run instead of /var/run.
Mdadm itself uses /run internally, we properly depend on initscripts
version which creates /run, and the initscript itself is started
after local_fs is processed, so this is merely a no-op, but let's
do it for consistency.
* Fix 'enough' function for RAID10, to prevent starting of a RAID10
array which does not have required minimum of component devices.
(Closes: #691668).
* fix segfaults in Detail() - mdadm --detail may segfault if a drive
has been removed from the array (Closes: #691670)
* super0: do not override uuid with homehost. The bug prevented
re-creating an array with v0.90 superblock with the specified uuid
when homehost is also specified. (Closes: #686703)
* several fixes for mdmon argument processing (Closes: #691671):
- allow --takeover when original was started with --offroot
- fix arg parsing.
- fix arg processing for -a
* Changes based on a patch by Miquel van Smoorenburg (Closes: #684708):
- install mdmon in udeb and initramfs, so imsm arrays can work.
mdadm runs mdmon automatically when needed (currently for imsm
arrays), and mdmon is required to make such arrays read-write
(they're read-only by default) so merely presence of mdmon is
enough to be able to use imsm arrays.
- /etc/init.d/mdadm start: if a mdmon pidfile is found in /run/mdadm,
restart mdmon (--takeover --all)
- /etc/init.d/mdadm stop: link pidfiles of mdmon processes into
/run/sendsigs.omit.d, and make sure that happens before sendsigs runs.
- stop mdadm before sendsigs, so that the above code works
- add script mdadm-waitidle that runs just before reboot/halt.
For each array that is still running, it sets sync_action to idle,
and uses mdadm --wait-clean to wait for all arrays to go idle
(it has a short timeout).
mdadm (3.2.5-3) unstable; urgency=low
* revert "Drop unused debconf templates" change -- the templates
are actually being (indirectly) used in debian/mdadm.config
* fix initramfs-script config name (slipped in the initramfs fixes)
mdadm (3.2.5-2) unstable; urgency=low
[ Sergey B Kirpichev ]
* Fix mdadm.lintian-overrides
* Fix spelling in binaries, fix lintian warnings
manpage-has-errors-from-man and hyphen-used-as-minus-sign
* Drop unused debconf templates
* Implement status option for mdadm-raid init.d script
* Fix lintian info's conflicts-with-version: Conflicts -> Breaks
[ Michael Tokarev ]
* fix spelling mistakes in previous changelog entry
* some cleanups for checkarray:
- change --help printing and shorten/simplify the text
- make --quiet cumulative and stop documenting --real-quiet
- do not produce help in case of incorrect usage, and exit with 1
* fixes for initramfs integration (Closes: #644389, #678262, #685161):
- check INITRDSTART=none early
- do not explicitly load raid level modules (modprobe/kmod does this)
- do not collect needed raid levels (we include all modules anyway)
- load md_mod explicitly since we need to change global parameter
[ Dmitrijs Ledkovs ]
* Use dh_installinit with --no-restart-on-upgrade, which will start
arrays, but will not stop them during upgrade. (Closes: 678971)
* Copy local administrator's modified udev rules as well as the system
one. (Closes: #678973)
-- Dmitrijs Ledkovs <email address hidden> Fri, 15 Feb 2013 00:23:05 +0100
